RESUMO
Based on previous reports on the optical microscopy contrast of mechanically exfoliated few layer CrCl 3 transferred on 285 nm and 270 nm SiO 2 on Si(100), we focus on the experimental determination of an effective mean complex refractive index via a fitting analysis based on the Fresnel equations formalism. Accordingly, the layer and wavelength-dependent absorbance and reflectance are calculated. Layer and wavelength-dependent optical contrast curves are then evaluated demonstrating that the contrast is significantly high only around well-defined wavelength bands. This is validated a posteriori, by experimental UV-Vis absorbance data. The present study aims to show the way towards the most reliable determination of thickness of the 2D material flakes during exfoliation.
In this work, we focus on a fast and accurate determination of the number of layers and thickness of two-dimensional (2D) CrCl 3 flakes. Like exfoliated graphite, MoS 2 or CrI 3 , CrCl 3 has many interesting aspects for its physical properties, namely the magnetic ones. As Raman characterization cannot be used in the case of CrCl 3 for its insensitivity to the flake thickness, optical contrast, as obtained by an optical microscope equipped with a digital camera, can be suitable to determine the number of exfoliated layers in a single flake. Without any additional equipment, the contrast, as routinely optimized by using specific silicon oxide (270 and 285 nm thickness) on Si wafers, can be recorded and compared with Fresnel calculations for the interference. As a result, fitting of the experimental contrast as a function of average values of light wavelength, real and imaginary refraction index provides good sensitivity to the flake thickness and useful determination of the optical parameters. The latter ones are often different from their bulk properties. In addition to optical parameters, the determination is also independent from the light source characteristics. The present approach represents in this a way a precious, fast and cheap way to determine a crucial quantity of the 2D materials flakes production.
RESUMO
The Elastic and Inelastic Scattering (EIS) beamline at the free-electron laser FERMI is presented. It consists of two separate end-stations: EIS-TIMEX, dedicated to ultrafast time-resolved studies of matter under extreme and metastable conditions, and EIS-TIMER, dedicated to time-resolved spectroscopy of mesoscopic dynamics in condensed matter. The scientific objectives are discussed and the instrument layout illustrated, together with the results from first exemplifying experiments.
RESUMO
Improvements in sodium intercalation in sodium cathodes have been debated in recent years. In the present work, we delineate the significant effect of the carbon nanotubes (CNTs) and their weight percent in the intercalation capacity of the binder-free manganese vanadium oxide (MVO)-CNTs composite electrodes. The performance modification of the electrode is discussed taking into account the cathode electrolyte interphase (CEI) layer under optimal performance. We observe an intermittent distribution of the chemical phases on the CEI, formed on these electrodes after several cycles. The bulk and superficial structure of pristine and Na+ cycled electrodes were identified via micro-Raman scattering and Scanning X-ray Photoelectron Microscopy. We show that the inhomogeneous CEI layer distribution strongly depends on the CNTs weight percentage ratio in an electrode nano-composite. The capacity fading of MVO-CNTs appears to be associated with the dissolution of the Mn2O3 phase, leading to electrode deterioration. This effect is particularly observed in electrodes with low weight percentage of the CNTs in which the tubular topology of the CNTs are distorted due to the MVO decoration. These results can deepen the understanding of the CNTs role on the intercalation mechanism and capacity of the electrode, where there are variations in the mass ratio of CNTs and the active material.
RESUMO
The protective coating of the electrode materials is a known source of improvement of the cycling performances in battery devices. In the case of the LiMn2O4 cathodes, the coating with a thin alumina layer has been proven to show performance efficiency. However, the precise mechanism of its effect on the performance improvement of the electrodes is still not clear. In this work we investigate alumina-coating-induced effects on the structural dynamics of the active materials in correlation to the modified solid electrolyte interface dynamics. The local structures of coated and uncoated samples at different galvanostatic points are studied by both soft X-ray absorption measurements at the Mn L-edges and O K-edge (in total electron yield mode) and hard X-ray absorption at the Mn K-edge (in transmission mode). The different probing depths of the employed techniques allowed us to study the structural dynamics both at the surface and within the bulk of the active material. We demonstrate that the coating successfully hinders the Mn3+ disproportionation and, hence, the degradation of the active material. Side products (layered Li2MnO3 and MnO) and changes in the local crystal symmetry with formation of Li2Mn2O4 are observed in uncoated electrodes. The role of alumina coating on the stability of the passivation layer and its consequent effect on the structural stability of the bulk active materials is discussed.
RESUMO
In this work, the characteristic structure of keratin extracted from two different kinds of industrial waste, namely sheep wool and chicken feathers, using the sulfitolysis method to allow film deposition, has been investigated. The structural and microscopic properties have been studied by means of scanning electron microscopy (SEM), Raman spectroscopy, atomic force microscopy (AFM), and infrared (IR) spectroscopy. Following this, small-angle X-ray scattering (SAXS) analysis for intermediate filaments has been performed. The results indicate that the assembly character of the fiber can be obtained by using the most suitable extraction method, to respond to hydration, thermal, and redox agents. The amorphous part of the fiber and medium range structure is variously affected by the competition between polar bonds (reversible hydrogen bonds) and disulfide bonds (DB), the covalent irreversible ones, and has been investigated by using fine structural methods such as Raman and SAXS, which have depicted in detail the intermediate filaments of keratin from the two different animal origins. The preservation of the secondary structure of the protein obtained does offer a potential for further application of the waste-obtained keratin in polymer films and, possibly, biocomposites.
RESUMO
Herein, we report the microscopic and spectroscopic signatures of the hydrated V2O5 phase, prepared from the α-V2O5 powder, which was kept in deionized water inside an airtight glass container for approximately 2.5 years. The experimental results show an evolution of the V4+ component in V 2p3/2 core energy level spectra, and a peak corresponding to σ-OH- bond appeared in the valence band spectra in the hydrated V2O5 powder sample due to the water intercalation. Vanadium metal oxide particles were found to be self-nucleated into micro/nanorods after a long period of exposure to an extremely humid environment. The distinct features in the spectra obtained with high-resolution transmission electron microscopy, micro-Raman scattering, and X-ray photoelectron spectroscopy confirmed the presence of structural water molecules for the first time in the long-aged naturally hydrated V2O5 phase.
RESUMO
We numerically investigated the use of graphene nanoribbons placed on top of silicon-on-insulator (SOI) strip waveguides for light polarization control in silicon photonic-integrated waveguides. We found that two factors mainly affected the polarization control: the graphene chemical potential and the geometrical parameters of the waveguide, such as the waveguide and nanoribbon widths and distance. We show that the graphene chemical potential influences both TE and TM polarizations almost in the same way, while the waveguide width tapering enables both TE-pass and TM-pass polarizing functionalities. Overall, by increasing the oxide spacer thickness between the silicon waveguide and the top graphene layer, the device insertion losses can be reduced, while preserving a high polarization extinction ratio.
RESUMO
Two-dimensional (2D) magnets such as chromium trihalides CrX3 (X = I, Br, Cl) represent a frontier for spintronics applications and, in particular, CrCl3 has attracted research interest due its relative stability under ambient conditions without rapid degradation, as opposed to CrI3. Herein, mechanically exfoliated CrCl3 flakes are characterized at the atomic scale and the electronic structures of pristine, oxidized, and defective monolayer CrCl3 phases are investigated employing density functional theory (DFT) calculations, scanning tunneling spectroscopy (STS), core level X-ray photoemission spectroscopy (XPS), and valence band XPS and ultraviolet photoemission spectroscopy (UPS). As revealed by atomically resolved transmission electron microscopy (TEM) and energy dispersive X-ray (EDX) analysis, the CrCl3 flakes show spontaneous surface oxidation upon air exposure with an extrinsic long-range ordered oxidized O-CrCl3 structure and amorphous chromium oxide formation on the edges of the flakes. XPS proves that CrCl3 is thermally stable up to 200 °C having intrinsically Cl vacancy-defects whose concentration is tunable via thermal annealing up to 400 °C. DFT calculations, supported by experimental valence band analysis, indicate that pure monolayer (ML) CrCl3 is an insulator with a band gap of 2.6 eV, while the electronic structures of oxidized and Cl defective phases of ML CrCl3, extrinsically emerging in exfoliated CrCl3 flakes, show in-gap spin-polarized states and relevant modifications of the electronic band structures.
RESUMO
Sticking together: The occupation of different sites by oxygen atoms that are produced by the dissociation of O(2) on Pd(100) is determined by the initial rotational alignment of the parent molecules. The atom locations are characterized by different chemical reactivities in the reaction with CO to form CO(2) (see picture), which are followed by synchrotron radiation (SR) experiments with a supersonic molecular beam (SMB).
RESUMO
The effect of surface modification using ascorbic acid as a surface modifier of nano-TiO2 heterogeneous photocatalyst was studied. The preparation of supported photocatalyst was made by a specific paste containing ascorbic acid modified TiO2 nanoparticles used to cover Polypropylene as a support material. The obtained heterogeneous photocatalyst was thoroughly characterized (scanning electron microscope (SEM), RAMAN, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), photoluminescence (PL), and Diffuse Reflectance Spectra (DRS) and successfully applied in the visible light photodegradation of Alizarin Red S in water solutions. In particular, this new supported TiO2 photocatalyst showed a change in the adsorption mechanism of dye with respect to that of only TiO2 due to the surface properties. In addition, an improvement of photocatalytic performances in the visible light photodegration was obtained, showing a strict correlation between efficiency and energy band gap values, evidencing the favorable surface modification of TiO2 nanoparticles.
RESUMO
Advanced metal oxide electrodes in Li-ion batteries usually show reversible capacities exceeding the theoretically expected ones. Despite many studies and tentative interpretations, the origin of this extra-capacity is not assessed yet. Lithium storage can be increased through different chemical processes developing in the electrodes during charging cycles. The solid electrolyte interface (SEI), formed already during the first lithium uptake, is usually considered to be a passivation layer preventing the oxidation of the electrodes while not participating in the lithium storage process. In this work, we combine high resolution soft X-ray absorption spectroscopy with tunable probing depth and photoemission spectroscopy to obtain profiles of the surface evolution of a well-known prototype conversion-alloying type mixed metal oxide (carbon coated ZnFe2O4) electrode. We show that a partially reversible layer of alkyl lithium carbonates is formed (â¼5-7 nm) at the SEI surface when reaching higher Li storage levels. This layer acts as a Li reservoir and seems to give a significant contribution to the extra-capacity of the electrodes. This result further extends the role of the SEI layer in the functionality of Li-ion batteries.
RESUMO
Graphene oxide (GO) is a promising material for the development of cost-effective detection systems. In this work, we have devised a simple and rapid GO-based method for the sequence-specific identification of DNA molecules generated by PCR amplification. The csp genes of Escherichia coli, which share a high degree of sequence identity, were selected as paradigm DNA templates. All tested csp genes were amplified with unlabelled primers, which can be rapidly removed at the end of the PCR taking advantage of the preferential binding to GO of single-stranded versus duplex DNA molecules. The amplified DNAs (targets) were heat-denatured and hybridized to a fluorescently-labelled single strand oligonucleotide (probe), which recognizes a region of the target DNAs displaying sequence variability. This interaction is extremely specific, taking place with high efficiency only when target and probe show perfect or near perfect matching. Upon GO addition, the unbound fraction of the probe was captured and its fluorescence quenched by the GO's molecular properties. On the other hand, the probe-target complexes remained in solution and emitted a fluorescent signal whose intensity was related to their degree of complementarity.
Assuntos
Técnicas Biossensoriais/métodos , DNA/isolamento & purificação , Grafite/química , Óxidos/química , Reação em Cadeia da Polimerase/métodos , Fluorescência , Corantes FluorescentesRESUMO
Novel composite materials PEn (n = 1-9) have been prepared by an easily up-scalable embedding procedure of three different families of Ag(I) acylpyrazolonato complexes in polyethylene (PE) matrix. In details, PE1-PE3 composites contain polynuclear [Ag(QR)]n complexes, PE4-PE6 contain mononuclear [Ag(QR)(L)m] complexes and PE7-PE9 are loaded with mononuclear [Ag(QR) (PPh3)2] complexes, respectively (where L = 1-methylimidazole or 2-ethylimidazole, m = 1 or 2, and HQR = 1-phenyl-3-methyl-4-RC(âO)-5-pyrazolone, where in detail HQfb, R = -CF2CF2CF3; HQcy, R = -cyclo-C6H11; HQbe, R = -C(H)âC(CH3)2). The PEn composites, prepared by using a 1:1000 w/w silver additive/polyethylene ratio, have been characterized in bulk by IR spectroscopy and TGA analyses, which confirmed that the properties of polyethylene matrix are essentially unchanged. AFM, SEM, and EDX surface techniques show that silver additives form agglomerates with dimensions 10-100 µm on the polyethylene surface, with a slight increment of surface roughness of pristine plastic within 50 nm. However, the elastic properties of the composites are essentially the same of PE. The antibacterial activity of all composites has been tested against three bacterial strains (E. coli, P. aeruginosa and S. aureus) and results show that two classes of composites, PE1-PE3 and PE4-PE6, display high and persistent bactericidal and bacteriostatic activity, comparable to PE embedded with AgNO3. By contrast, composites PE7-PE9 exhibit a reduced antibacterial action. Contact and release tests in several conditions for specific migration of Ag+ from plastics, indicate a very limited but time persistent release of silver ions from PE1-PE6 composites, thus suggesting that they are potential antibacterial materials for future applications. Instead, PE7-PE9 almost do not release silver, only trace levels of silver ions being detected, in accordance with their reduced antibacterial action. None of the composites is toxic against higher organisms, as confirmed by D. magna test of ecotoxicity.
Assuntos
Polietileno/química , Antibacterianos , Escherichia coli , Prata , Staphylococcus aureusRESUMO
The Knoevenagel condensation of aldose sugars with beta-dicarbonyl compounds produces furan derivatives having polyhydroxyalkylated alkyl side chains; this reaction is known as the Garcia Gonzalez reaction. Despite the fact that these polyhydroxyalkyl furans are interesting scaffolds for synthetic chemists to utilize in the synthesis of a variety of biologically interesting molecules, the reported approach suffers from harsh conditions. The development of a general and more efficient protocol is of considerable importance, and in this manuscript, we wish to explore the role of the NaI in enhancing the activity of CeCl3.7H2O as a useful water-tolerant Lewis acid promoter for the Garcia Gonzalez reaction. The procedure proceeds with good yields at 50 degrees C using our system supported on SiO2 in solvent-free conditions and represents a simple and convenient methodology for the preparation of densely functionalized molecules. Furthermore, the first qualitative results obtained on mechanistic investigation on the role of iodide on this our heterogeneous reaction may be of value for optimization of existing organic transformations and for the development of new ones.