Fabrication and Characterization of Poly(ε-caprolactone)/α-Cyclodextrin Pseudorotaxane Nanofibers.

Multifunctional scaffolds comprising neat poly(ε-caprolactone) (PCL) and α-cyclodextrin pseudorotaxanated in α-cyclodextrin form have been fabricated using a conventional electrospinning process. Thorough in-depth characterizations were performed on the pseudorotaxane nanofibers prepared from chloroform (CFM) and CFM/dimethylformamide (DMF) utilizing scanning electron microscopy (SEM), transmission electron microscopy (TEM), rheology, differential scanning calorimetry (DSC), thermogravimetric analyses (TGA), wide-angle X-ray diffraction (WAXD), and Instron tensile testing. The results indicate the nanofibers obtained from chloroform retain the rotaxanated structure; while those obtained from CFM/DMF had significantly dethreaded during electrospinning. As a consequence, the nanowebs obtained from CFM showed higher moduli and lower elongations at break compared to neat PCL nanowebs and PCL/α-CD nanowebs electrospun from CFM/DMF.

Buffers more than buffering agent: introducing a new class of stabilizers for the protein BSA.

In this study, we have analyzed the influence of four biological buffers on the thermal stability of bovine serum albumin (BSA) using dynamic light scattering (DLS). The investigated buffers include 4-(2-hydroxyethyl)piperazine-1-ethanesulfonic acid (HEPES), 4-(2-hydroxyethyl)-1-piperazine-propanesulfonic acid (EPPS), 4-(2-hydroxyethyl)piperazine-1-ethanesulfonic acid sodium salt (HEPES-Na), and 4-morpholinepropanesulfonic acid sodium salt (MOPS-Na). These buffers behave as a potential stabilizer for the native structure of BSA against thermal denaturation. The stabilization tendency follows the order of MOPS-Na > HEPES-Na > HEPES ≫ EPPS. To obtain an insight into the role of hydration layers and peptide backbone in the stabilization of BSA by these buffers, we have also explored the phase transition of a thermoresponsive polymer, poly(N-isopropylacrylamide (PNIPAM)), a model compound for protein, in aqueous solutions of HEPES, EPPS, HEPES-Na, and MOPS-Na buffers at different concentrations. It was found that the lower critical solution temperatures (LCST) of PNIPAM in the aqueous buffer solutions substantially decrease with increase in buffer concentration. The mechanism of interactions between these buffers and protein BSA was probed by various techniques, including UV-visible, fluorescence, and FTIR. The results of this series of studies reveal that the interactions are mainly governed by the influence of the buffers on the hydration layers surrounding the protein. We have also explored the possible binding sites of BSA with these buffers using a molecular docking technique. Moreover, the activities of an industrially important enzyme α-chymotrypsin (α-CT) in 0.05 M, 0.5 M, and 1.0 M of HEPES, EPPS, HEPES-Na, and MOPS-Na buffer solutions were analyzed at pH = 8.0 and T = 25 °C. Interestingly, the activities of α-CT were found to be enhanced in the aqueous solutions of these investigated buffers. Based upon the Jones-Dole viscosity parameters, the kosmotropic or chaotropic behaviors of the investigated buffers at 25 °C have been examined.

Risk factors for cancer cervix among rural women of a hilly state: a case-control study.

In Himachal Pradesh, cancer cervix is a major public health problem since it ranks as the number one female cancer. A case-control study of 226 newly diagnosed, histopathologically confirmed cases of cancer cervix and equal number of matched controls was conducted at Regional Cancer Center, Himachal Pradesh during the period from July 2008 to October 2009 with the objective to study the common factors associated with cancer cervix. Univariate analysis identified 10 risk factors associated significantly with the disease. On multiple logistic regression, however, only seven risk factors were found to be associated significantly with the disease. These were: Age at birth of first child, spacing between two children, age at marriage, literacy, socioeconomic status, multiparity, and poor genital hygiene. Risk factors such as poor genital hygiene, age at birth of first child <19 years, early marriage, illiteracy, multiparity, and low socioeconomic status were highly prevalent in the study subjects and were found to be significantly associated with cancer cervix.

Poly(ε-caprolactone) nanowebs functionalized with α- and γ-cyclodextrins.

The effects of alpha- and gamma-cyclodextrins (α- and γ-CDs) on the thermal and crystal nucleation behavior of electrospun poly(ε-caprolactone) (PCL) nanofibers have been investigated. PCL/CD composite nanofibers were obtained for the first time by electrospinning the mixture from chloroform/N,N-dimethylformamide (60:40). Scanning electron microscopy analyses indicated that neat PCL nanofibers have an average diameter of 400 nm, which increases with the addition of CDs. The presence of CDs on or in the electrospun PCL fibers in the electrospun mats was investigated using Fourier transform infrared spectroscopy, thermogravimetric analysis, and wide-angle X-ray diffraction analysis. Differential scanning calorimetry showed that the PCL/CD composite fibers exhibit higher crystallization temperatures and sharper crystallization exotherms with increased CD loading, indicating the ability of CDs to nucleate PCL crystallization. Water contact angle (WCA) measurements indicate an inverse relationship between WCA and α- or γ-CD concentration up to 30% loading. Phenolphthalein absorption tests were performed to study the kinetics of their inclusion complex (IC) formation with CDs. Unexpectedly, γ-CD-functionalized nanowebs performed better than α-CD. This might be because at elevated loadings some α-CDs may have threaded over PCL chains and formed ICs, whereas γ-CD did not. With their encapsulation capabilities and their lowered hydrophobicity, PCL/CD composite fibers might have potential uses in medical applications, in particular as wound odor absorbants in dressings, because it is well known that CDs can form ICs with these odorants, thereby effectively removing them.

Evaluation of nano- and submicron particle penetration through ten nonwoven fabrics using a wind-driven approach.

Existing face mask and respirator test methods draw particles through materials under vacuum to measure particle penetration. However, these filtration-based methods may not simulate conditions under which protective clothing operates in the workplace, where airborne particles are primarily driven by wind and other factors instead of being limited to a downstream vacuum. This study was focused on the design and characterization of a method simulating typical wind-driven conditions for evaluating the performance of materials used in the construction of protective clothing. Ten nonwoven fabrics were selected, and physical properties including fiber diameter, fabric thickness, air permeability, porosity, pore volume, and pore size were determined. Each fabric was sealed flat across the wide opening of a cone-shaped penetration cell that was then housed in a recirculation aerosol wind tunnel. The flow rate naturally driven by wind through the fabric was measured, and the sampling flow rate of the Scanning Mobility Particle Sizer used to measure the downstream particle size distribution and concentrations was then adjusted to minimize filtration effects. Particle penetration levels were measured under different face velocities by the wind-driven method and compared with a filtration-based method using the TSI 3160 automated filter tester. The experimental results show that particle penetration increased with increasing face velocity, and penetration also increased with increasing particle size up to about 300 to 500 nm. Penetrations measured by the wind-driven method were lower than those obtained with the filtration method for most of the fabrics selected, and the relative penetration performances of the fabrics were very different due to the vastly different pore structures.

Chitin and chitosan production from shrimp shells using ammonium-based ionic liquids.

Ammonium-based ionic liquids (ILs): diisopropylethylammonium acetate ([DIPEA][Ac]), diisopropylethylammonium propanoate ([DIPEA][P]) and dimethylbutylammonium acetate ([DMBA][Ac]) are used for the extraction of chitin from shrimp shells. The extracted chitins were characterized by FT-IR, TGA, XRD, SEM and 1H NMR. The yield of chitin, with moderate molecular weights, can be as high as 13.4% (mass of extracted chitin/mass of shrimp shells) when the extraction was operated at 110 °C for 24 h. The extracted chitin can be further converted into chitosan and the product has 93% degree of deacetylation. The experimental results reveal that the ILs play a remarkable role in the extraction of chitin from shrimp shells with high selectivity. These ammonium-based ILs can be a promising green solvent to extract chitin from wasted shrimp shells and then converted into chitosan.

Treatment of Coffee Husk with Ammonium-Based Ionic Liquids: Lignin Extraction, Degradation, and Characterization.

Four ammonium-based ionic liquids were synthesized for the selective extraction and degradation of lignin from coffee husk. The extracted lignin samples were characterized by Fourier transform infrared, gel permeation chromatography, gas chromatography-mass spectrometry, UV-vis, 1H and 13C NMR, heteronuclear single-quantum coherence-NMR, thermogravimetric analysis, X-ray diffraction, and field emission scanning electron microscopy analyses. The analyzed results confirmed that these ionic liquids are able to effectively extract and decompose the lignin to smaller molecules from the biomass. Experimental results show that a significantly high yield, 71.2% of the original lignin, has been achieved. This processing method is an efficient, economical, and environmentally friendly green route for producing high-added-value lignin from wasted coffee husk.

Aliphatic Polyester Nanofibers Functionalized with Cyclodextrins and Cyclodextrin-Guest Inclusion Complexes.

The fabrication of nanofibers by electrospinning has gained popularity in the past two decades; however, only in this decade, have polymeric nanofibers been functionalized using cyclodextrins (CDs) or their inclusion complexes (ICs). By combining electrospinning of polymers with free CDs, nanofibers can be fabricated that are capable of capturing small molecules, such as wound odors or environmental toxins in water and air. Likewise, combining polymers with cyclodextrin-inclusion complexes (CD-ICs), has shown promise in enhancing or controlling the delivery of small molecule guests, by minor tweaking in the technique utilized in fabricating these nanofibers, for example, by forming core⁻shell or multilayered structures and conventional electrospinning, for controlled and rapid delivery, respectively. In addition to small molecule delivery, the thermomechanical properties of the polymers can be significantly improved, as our group has shown recently, by adding non-stoichiometric inclusion complexes to the polymeric nanofibers. We recently reported and thoroughly characterized the fabrication of polypseudorotaxane (PpR) nanofibers without a polymeric carrier. These PpR nanofibers show unusual rheological and thermomechanical properties, even when the coverage of those polymer chains is relatively sparse (~3%). A key advantage of these PpR nanofibers is the presence of relatively stable hydroxyl groups on the outer surface of the nanofibers, which can subsequently be taken advantage of for bioconjugation, making them suitable for biomedical applications. Although the number of studies in this area is limited, initial results suggest significant potential for bone tissue engineering, and with additional bioconjugation in other areas of tissue engineering. In addition, the behaviors and uses of aliphatic polyester nanofibers functionalized with CDs and CD-ICs are briefly described and summarized. Based on these observations, we attempt to draw conclusions for each of these combinations, and the relationships that exist between their presence and the functional behaviors of their nanofibers.

Hepatic Venous Waveform, Splenoportal and Damping Index in Liver Cirrhosis: Correlation with Child Pugh's Score and Oesophageal Varices.

INTRODUCTION: Clinical assessment of chronic liver disease is done by Modified Child Pugh's and Model for end-stage liver disease scoring system. Measurement of hepatic venous pressure gradient (HVPG) and Upper GI Endoscopy are considered the gold standards for measurement of portal hypertension in cirrhotics. There is a need for non-invasive evaluation of portal hypertension. Ultrasonography with colour and spectral Doppler evaluation may be an effective, rapid and inexpensive alternative. AIM: To evaluate hepatic venous waveform, damping index, splenoportal index in patients of cirrhosis on Colour Doppler ultrasound, also predict severity of portal hypertension and presence of oesophageal varices. MATERIALS AND METHODS: Thirty patients of chronic liver disease were included in the study. Ultrasound and colour Doppler was done to look hepatic venous waveform pattern, Damping Index (DI), and Splenoportal Index (SPI). Contrast-enhanced Computed Tomography scan (CT) was done if renal function tests were normal, else endoscopy when the renal function tests were deranged to look for oesophageal varices. RESULTS: Twenty two (73.3%) patients had monophasic waveform. Biphasic and triphasic waveforms were seen in 4 (13.3%) cases. Twenty two patients (73.3%) had monophasic waveforms and majority of them were in class C. This distribution of hepatic vein waveform was statistically significantly with the Child Pugh's class (p<0.05). Twenty patients (66.7%) had value of Damping index more than >0.6 where majority of patients (18) belonged to class C and 2 in class B. There was a positive correlation between Child Pugh's total score and Damping index (r=0.614; p<0.05). There was weak positive correlation between splenoportal index and Child Pugh's score (r=0.269; p=0.15). CONCLUSION: Change in triphasic to monophasic waveform and DI >0.6 suggests severe liver dysfunction and is associated with severe portal hypertension. Hepatic venous waveform pressure changes, DI and SPI have no value in predicting presence of oesophageal varices.

Estimation of the poly (ε-caprolactone) [PCL] and α-cyclodextrin [α-CD] stoichiometric ratios in their inclusion complexes [ICs], and evaluation of porosity and fiber alignment in PCL nanofibers containing these ICs.

This paper describes the utilization of Proton-Nuclear Magnetic Resonance spectroscopy ((1)H NMR) to quantify the stoichiometric ratios between poly (ε-caprolactone) [PCL] and α-cyclodextrin (α-CD) present in their non-stoichiometric inclusion complexes [(n-s)-ICs]. This paper further describes the porosity and fiber alignment of PCL nanofibers nucleated by the [(n-s)-ICs] during electrospinning. (1)H NMR indicated that the two non-stoichiometric inclusion complexes utilized in this study had differing stoichiometric ratios that were closely similar to those of the starting ratios used to make them. Studies on porosity and fiber alignments were conducted on the scanning electron microscope images using ImageJ. The data indicates that both fiber alignment as well as porosity values remain almost the same over all the samples. Thus we can conclude the improvement in mechanical properties was due only to the loading of the ICs, and their subsequent interaction with bulk unthreaded PCL.

Collagen-PCL sheath-core bicomponent electrospun scaffolds increase osteogenic differentiation and calcium accretion of human adipose-derived stem cells.

Human adipose-derived stem cells (hASCs) are an abundant cell source capable of osteogenic differentiation, and have been investigated as an autologous stem cell source for bone tissue engineering applications. The objective of this study was to determine if the addition of a type-I collagen sheath to the surface of poly(ε-caprolactone) (PCL) nanofibers would enhance viability, proliferation and osteogenesis of hASCs. This is the first study to examine the differentiation behavior of hASCs on collagen-PCL sheath-core bicomponent nanofiber scaffolds developed using a co-axial electrospinning technique. The use of a sheath-core configuration ensured a uniform coating of collagen on the PCL nanofibers. PCL nanofiber scaffolds prepared using a conventional electrospinning technique served as controls. hASCs were seeded at a density of 20 000 cells/cm(2) on 1 cm(2) electrospun nanofiber (pure PCL or collagen-PCL sheath-core) sheets. Confocal microscopy and hASC proliferation data confirmed the presence of viable cells after 2 weeks in culture on all scaffolds. Greater cell spreading occurred on bicomponent collagen-PCL scaffolds at earlier time points. hASCs were osteogenically differentiated by addition of soluble osteogenic inductive factors. Calcium quantification indicated cell-mediated calcium accretion was approx. 5-times higher on bicomponent collagen-PCL sheath-core scaffolds compared to PCL controls, indicating collagen-PCL bicomponent scaffolds promoted greater hASC osteogenesis after two weeks of culture in osteogenic medium. This is the first study to examine the effects of collagen-PCL sheath-core composite nanofibers on hASC viability, proliferation and osteogenesis. The sheath-core composite fibers significantly increased calcium accretion of hASCs, indicating that collagen-PCL sheath-core bicomponent structures have potential for bone tissue engineering applications using hASCs.

Risk Factors for Cancer Cervix among Rural Women of a Hilly State: A Case-Control Study.

In Himachal Pradesh, cancer cervix is a major public health problem since it ranks as the number one female cancer. A case-control study of 226 newly diagnosed, histopathologically confi rmed cases of cancer cervix and equal number of matched controls was conducted at Regional Cancer Center, Himachal Pradesh during the period from July 2008 to October 2009 with the objective to study the common factors associated with cancer cervix. Univariate analysis identifi ed 10 risk factors associated signifi cantly with the disease. On multiple logistic regression, however, only seven risk factors were found to be associated signifi cantly with the disease. These were: Age at birth of fi rst child, spacing between two children, age at marriage, literacy, socioeconomic status, multiparity, and poor genital hygiene. Risk factors such as poor genital hygiene, age at birth of fi rst child <19 years, early marriage, illiteracy, multiparity, and low socioeconomic status were highly prevalent in the study subjects and were found to be signifi cantly associated with cancer cervix.