RESUMO
NMR methods were applied for lubricant analysis. Different factors influence the real aging of lubricants on diverse length scales and are captured by NMR. Chemical conversion of additives is addressed by NMR spectroscopy. High-field NMR experiments allow the identification and quantification of chemical components and are transferred to benchtop devices. Molecular dynamics and contaminations like fuel or abrasion are addressed via NMR relaxation and diffusion. Quality parameters were extracted via suitable data analysis of NMR raw data, which allow the detection of aging and indicate changes in the oil composition. At the same time, the methodology is optimized to the conditions in quality control. The feasibility is shown the example of a series of lubricants from applications in regenerative energy production, namely, wind turbine oils and biogas motor oils.
RESUMO
Inline analytics in industrial processes reduce operating costs and production rejection. Dedicated sensors enable inline process monitoring and control tailored to the application of interest. Nuclear Magnetic Resonance is a well-known analytical technique but needs adapting for low-cost, reliable and robust process monitoring. A V-shaped low-field NMR sensor was developed for inline process monitoring and allows non-destructive and non-invasive measurements of materials, for example in a pipe. In this paper, the industrial application is specifically devoted to the quality control of anode slurries in battery production. The characterization of anode slurries was performed with the sensor to determine chemical composition and detect gas inclusions. Additionally, flow properties play an important role in continuous production processes. Therefore, the in- and outflow effects were investigated with the V-shaped NMR sensor as a basis for the future determination of slurry flow fields.
RESUMO
To reduce unwanted fat bloom in the manufacturing and storage of chocolates, detailed knowledge of the chemical composition and molecular mobility of the oils and fats contained is required. Although the formation of fat bloom on chocolate products has been studied for many decades with regard to its prevention and reduction, questions on the molecular level still remain to be answered. Chocolate products with nut-based fillings are especially prone to undesirable fat bloom. The chemical composition of fat bloom is thought to be dominated by the triacylglycerides of the chocolate matrix, which migrate to the chocolate's surface and recrystallize there. Migration of oils from the fillings into the chocolate as driving force for fat bloom formation is an additional factor in the discussion. In this work, the migration was studied and confirmed by MRI, while the chemical composition of the fat bloom was measured by NMR spectroscopy and HPLC-MS, revealing the most important triacylglycerides in the fat bloom. The combination of HPLC-MS with NMR spectroscopy at 800 MHz allows for detailed chemical structure determination. A rapid routine was developed combining the two modalities, which was then applied to investigate the aging, the impact of chocolate composition, and the influence of hazelnut fillings processing parameters, such as the degree of roasting and grinding of the nuts or the mixing time, on fat bloom formation.
Assuntos
Chocolate , Espectroscopia de Ressonância Magnética , Chocolate/análise , Cromatografia Líquida de Alta Pressão/métodos , Espectroscopia de Ressonância Magnética/métodos , Espectrometria de Massas/métodos , Triglicerídeos/análise , Triglicerídeos/química , Cacau/química , Análise de Alimentos/métodos , Corylus/química , Espectrometria de Massa com Cromatografia LíquidaRESUMO
Process monitoring and control require dedicated and reliable measures which reflect the status of the process under investigation. Although nuclear magnetic resonance is known to be a versatile analytical technique, it is only seldomly found in process monitoring. Single-sided nuclear magnetic resonance is one well known approach for being applied in process monitoring. The dedicated V-sensor is a recent approach that allows the inline investigation of materials in a pipe non-destructively and non-invasively. An open geometry of the radiofrequency unit is realized using a tailored coil, enabling the sensor to be applied for manifold mobile applications in in-line process monitoring. Stationary liquids were measured, and their properties were integrally quantified as the basis for successful process monitoring. The sensor, in its inline version, is presented along with its characteristics. An exemplary field of application is battery production in terms of anode slurries; thus, the first results on graphite slurries will demonstrate the added value of the sensor in process monitoring.
RESUMO
Selectivity and image contrast are always challenging in magnetic resonance imaging (MRI), which are - inter alia - addressed by contrast agents. These compounds still need to be improved, and their relaxation properties, i. e., their paramagnetic relaxation enhancement (PRE), needs to be understood. The main goal is to improve specificity and relaxivities, especially at the high magnetic fields currently exploited not only in material science but also in the medical environment. Longitudinal and transverse relaxivities, r1 and r2 , which correspond to the longitudinal and transverse relaxation rates R1 and R2, normalized to the concentration of the paramagnetic moieties, need to be considered because both contribute to the image contrast. 1 H-relaxivities r1 and r2 of high-spin heterometallic clusters were studied containing lanthanide and transition-metal ions within a polyoxometalate matrix. A wide range of magnetic fields from 0.5â T/20â MHz to 33â T/1.4â GHz was applied. The questions addressed here concern the rotational and diffusion correlation times which determine the relaxivities and are affected by the solvent's viscosity. Moreover, the variation of the lanthanide and transition-metal ions of the clusters provided insights into the sensitivity of PRE with respect to the electron spin properties of the paramagnetic centers as well as cooperative effects between lanthanides and transition metal ions.
Assuntos
Meios de Contraste , Elementos da Série dos Lantanídeos , Ânions , Meios de Contraste/química , Íons , Elementos da Série dos Lantanídeos/química , Imageamento por Ressonância Magnética , Polieletrólitos , SolventesRESUMO
Lubricating greases were investigated by nuclear magnetic resonance/magnetic resonance imaging (NMR/MRI) to get insight into their structure and into their response to mechanical forces, which is related to bleeding and aging. The investigated greases are based on metallic soaps of fatty acids and oils, whereby LiOH is often used. These organic soaps act as thickeners and provide a network in which oils and their additives are embedded. Lubricating greases can thus be considered as a class of substances similar to oleogels or even hydrogels. Questions arise about translational mobility of guest molecules, mainly base oil, in these networks. Molecular structuring and interactions within the network of thickeners are of interest as they are related to macroscopic stability. Apart from NMR spectroscopy (1 H-, 7 Li- and 31 P-NMR), spectrally resolved relaxation and diffusion measurements are used for characterization. In addition, magic angle spinning (MAS)-NMR was combined with 1 H-MRI to investigate the impact of mechanical stress and swelling of lubricating greases.
Assuntos
Ácidos Graxos , Imageamento por Ressonância Magnética , Difusão , Espectroscopia de Ressonância Magnética/métodosRESUMO
The crystallization of melt emulsions is of great interest to the food, cosmetic, and pharmaceutical industries. Surfactants are used in emulsions and suspensions to stabilize the dispersed phase; thus, questions arise about the liquid-liquid and solid-liquid interfaces of the droplets or particles and the distribution of the surfactant in the different phases (continuous and dispersed phase, interface). Nuclear magnetic resonance relaxation and diffusion measurements revealed that the internal and rotational mobility of surfactant molecules at the liquid-liquid interface decreases with increasing droplet sizes. Additionally, solid-liquid interfaces have fewer surfactants than liquid-liquid interfaces as a result of the desorption of the surfactant molecules during the crystallization of the droplets. Relaxation rates of surfactant molecules in aqueous solution as single molecules, micelles, and at the liquid-liquid and solid-liquid interface are analyzed for the first time.
Assuntos
Tensoativos , Água , Tensoativos/química , Emulsões/química , Cristalização , Água/química , Espectroscopia de Ressonância MagnéticaRESUMO
Increasing the efficiency of disperse phase crystallization is of great interest for melt emulsion production as the fraction of solidified droplets determines product quality and stability. Nucleation events must appear within every single one of the µm-sized droplets for solidification. Therefore, primary crystallization requires high subcooling and is, thus, time and energy consuming. Contact-mediated nucleation is a mechanism for intensifying the crystallization process. It is defined as the successful nucleation of a subcooled liquid droplet induced by contact with an already crystallized droplet. We investigated contact-mediated nucleation under shear flow conditions up to shear rates of 457 s-1 for a quantitative assessment of this mechanism. Rheo-nuclear magnetic resonance was successfully used for the time-resolved determination of the solids fraction of the dispersed phase of melt emulsions upon contact-mediated nucleation events. The measurements were carried out in a dedicated Taylor-Couette cell. The efficiency of contact-mediated nucleation λsec decreased with increasing shear rate, whereas the effective second order kinetic constant kcoll,eff increased approximately linearly at small shear rates and showed a linear decrease for shear rates higher than about 200 s-1 . These findings are in accordance with coalescence theory. Thus, the nucleation rate is optimal at specific flow conditions. There are limitations for successful inoculation at a low shear rate because of rare contact events and at a high shear rate due to too short contact time.
Assuntos
Emulsões , Cristalização , Emulsões/química , Cinética , Espectroscopia de Ressonância MagnéticaRESUMO
A dedicated nuclear magnetic resonance (NMR) sensor was designed for the analysis of liquids. The magnets are arranged in a V shape, creating a spatially dependent magnetic field in the gap. Measurements of samples with diverse diameters are possible underdefined magnetic field gradients at a given position. The magnet thus combines properties of single sided NMR with high static magnetic field gradients and classical time domain (TD) devices with lower to almost zero gradients. The sensor can easily be adapted to the requirements of the considered investigation; probes can be customized. On the example of lubricants and their aging, the added value and applicability of this sensor in quality control are highlighted in this publication. Relaxation and diffusion were measured by Carr-Purcell-Meiboom-Gill (CPMG) while varying the echo time τe and quantified via numerical modeling. Especially, relaxation shows a high sensitivity towards aging of lubricants such as particulate abrasion and changes in molecular dynamics induced, for example, by additive depletion. The applicability of this NMR sensor in quality control is demonstrated on the example of engine and transmission oils as well as of lubrication greases.
RESUMO
The current trend for ultra-high-field magnetic resonance imaging (MRI) technologies opens up new routes in clinical diagnostic imaging as well as in material imaging applications. MRI selectivity is further improved by using contrast agents (CAs), which enhance the image contrast and improve specificity by the paramagnetic relaxation enhancement (PRE) mechanism. Generally, the efficacy of a CA at a given magnetic field is measured by its longitudinal and transverse relaxivities r1 and r2, i.e., the longitudinal and transverse relaxation rates T1-1 and T2-1 normalized to CA concentration. However, even though basic NMR sensitivity and resolution become better in stronger fields, r1 of classic CA generally decreases, which often causes a reduction of the image contrast. In this regard, there is a growing interest in the development of new contrast agents that would be suitable to work at higher magnetic fields. One of the strategies to increase imaging contrast at high magnetic field is to inspect other paramagnetic ions than the commonly used Gd(III)-based CAs. For lanthanides, the magnetic moment can be higher than that of the isotropic Gd(III) ion. In addition, the symmetry of electronic ground state influences the PRE properties of a compound apart from diverse correlation times. In this work, PRE of water 1H has been investigated over a wide range of magnetic fields for aqueous solutions of the lanthanide containing polyoxometalates [DyIII(H2O)4GeW11O39]5- (Dy-W11), [ErIII(H2O)3GeW11O39]5- (Er-W11) and [{ErIII(H2O)(CH3COO)(P2W17O61)}2]16- (Er2-W34) over a wide range of frequencies from 20 MHz to 1.4 GHz. Their relaxivities r1 and r2 increase with increasing applied fields. These results indicate that the three chosen POM systems are potential candidates for contrast agents, especially at high magnetic fields.
RESUMO
In white biotechnology research, the putative superiority of productive biofilms to conventional biotransformation processes based on planktonic cultures has been increasingly discussed in recent years. In the present study, we chose lactic acid production as a model application to evaluate biofilm potential. A pure culture of Lactobacillus bacteria was grown in a tubular biofilm reactor. The biofilm system was cultivated monoseptically in a continuous mode for more than 3 weeks. The higher cell densities that could be obtained in the continuous biofilm system compared with the planktonic culture led to a significantly increased space-time yield. The productivity reached 80% of the maximum value 10 days after start-up and no subsequent decline was observed, confirming the suitability of the system for long-term fermentation. The analysis of biofilm performance revealed that productivity increases with the flow velocity. This is explained by the reduced retention time of the liquid phase in the reactor, and, thus, a minor pH drop caused by the released lactic acid. At low flow velocities, the pH drops to a value where growth and production are significantly inhibited. The biofilm was visualized by magnetic resonance imaging to analyze biofilm thickness. To deepen the understanding of the biofilm system, we used a simple model for cell growth and lactic acid production.
Assuntos
Biofilmes/crescimento & desenvolvimento , Reatores Biológicos , Ácido Láctico/biossíntese , Lactobacillus delbrueckii/fisiologiaRESUMO
Oil is a prominent, but multifaceted material class with a wide variety of applications. Technical oils, crude oils as well as edibles are main subclasses. In this review, the question is addressed how low-field NMR can contribute in oil characterization as an analytical tool, mainly with respect to quality control. Prerequisite in the development of a quality control application, however, is a detailed understanding of the oils and of the measurement. Low-field NMR is known as a rich methodical toolbox that was and is explored and further developed to address questions about oils, their quality, and usability as raw materials, during production and formulation as well as in use.
RESUMO
Filtration and separation via membranes are key processes in food processing. One major application of membrane filtration is in the dairy industry, aiming for the separation of different milk proteins. The various chemical components of milk possess different physiochemical properties and can be used most effectively in food processing if they are separately available and remain in their native state. Microfiltration of skim milk allows a fractionation of the milk proteins casein and whey by size. A deposit is formed on the membrane surface mainly but not exclusively by micellar casein proteins during filtration. Membrane pore blockage by whey proteins and fouling occur during membrane filtration, negatively affecting the yield of the whey protein fraction. Skim milk filtration and the deposit layer formation were measured time and spatially resolved by in situ magnetic resonance imaging (MRI). The nature of the fouling layer was investigated during dead-end filtration in ceramic hollow fiber membranes. MRI was used to further clarify the influence of operating conditions on separation and filtration mechanisms that are responsible for growth of the fouling layer and its reversibility. The MRI measurements were analyzed for a detailed description of skim milk filtration by modeling the signal intensity distribution.
RESUMO
Mass transfer in biofilms is determined by diffusion. Different mostly invasive approaches have been used to measure diffusion coefficients in biofilms, however, data on heterogeneous biomass under realistic conditions is still missing. To non-invasively elucidate fluid-structure interactions in complex multispecies biofilms pulsed field gradient-nuclear magnetic resonance (PFG-NMR) was applied to measure the water diffusion in five different types of biomass aggregates: one type of sludge flocs, two types of biofilm, and two types of granules. Data analysis is an important issue when measuring heterogeneous systems and is shown to significantly influence the interpretation and understanding of water diffusion. With respect to numerical reproducibility and physico-chemical interpretation, different data processing methods were explored: (bi)-exponential data analysis and the Γ distribution model. Furthermore, the diffusion coefficient distribution in relation to relaxation was studied by D-T2 maps obtained by 2D inverse Laplace transform (2D ILT). The results show that the effective diffusion coefficients for all biofilm samples ranged from 0.36 to 0.96 relative to that of water. NMR diffusion was linked to biofilm structure (e.g., biomass density, organic and inorganic matter) as observed by magnetic resonance imaging and to traditional biofilm parameters: diffusion was most restricted in granules with compact structures, and fast diffusion was found in heterotrophic biofilms with fluffy structures. The effective diffusion coefficients in the biomass were found to be broadly distributed because of internal biomass heterogeneities, such as gas bubbles, precipitates, and locally changing biofilm densities. Thus, estimations based on biofilm bulk properties in multispecies systems can be overestimated and mean diffusion coefficients might not be sufficiently informative to describe mass transport in biofilms and the near bulk.
Assuntos
Bactérias/química , Biofilmes , Espectroscopia de Ressonância Magnética/métodos , Modelos Biológicos , Modelos Químicos , Água/química , Absorção Fisiológica , Simulação por Computador , DifusãoRESUMO
The adsorption of phosphatidylcholines (PCs), dissolved in squalene or squalane as an organic phase, was studied at the interface with water. Using profile analysis tensiometry, the equilibrium adsorption isotherms, minimum molecular interfacial areas, and solubility limits were derived. For squalene, differences in PC solubility and interfacial adsorption were found, depending on PC saturation. Compared to saturated PCs, unsaturated PCs showed a 3-fold-lower interfacial density but up to a 28-fold-higher critical aggregation concentration (CAC). In addition, the solubility limit of unsaturated PC in squalene and in its saturated form squalane diverged by a factor of 739. These findings provided evidence for steric repulsion or π-π interactions of π bonds in both solvent and solute or both effects acting complementarily. In squalane, low solubilities but high interfacial densities were found for all investigated PCs. Changes in fatty acid chain lengths showed that the influence of the increases in entropy and enthalpy on solubility is much smaller than solvent/solute interactions. Oxidation products of squalene lowered the interfacial tension, but increasing concentrations of PC expelled them from the interface. The CAC of saturated PC was increased by oxidation products of squalene whereas that of unsaturated PCs was not. Our findings indicate that the oxidation of triglycerides in lipoprotein cores can lead to increased solubility of saturated phospholipids covering the lipoproteins, contributing to destabilization, coalescence, and terminally the formation of atherosclerotic plaques. The consideration of solvent/solute interactions in molecular modeling may contribute to the interfacial tension and the corresponding kinetic or thermodynamic stability of lipoproteins. Measured areas per molecule prove that PCs form monolayers of different interfacial densities at the squalene/water interface but multilayers at the squalane/water interface. These findings showed that combinations of solvent or solute saturation affect the outcome for nanoemulsions forming either expanded or condensed monolayers or multilayers.
Assuntos
Lipoproteínas/química , Fosfatidilcolinas/química , Esqualeno/química , Emulsões , Estabilidade ProteicaRESUMO
Hyphenated low-field NMR techniques are promising characterization methods for online process analytics and comprehensive offline studies of soft materials. By combining different analytical methods with low-field NMR, information on chemical and physical properties can be correlated with molecular dynamics and complementary chemical information. In this review, we present three hyphenated low-field NMR techniques: a combination of near-infrared spectroscopy and time-domain NMR (TD-NMR) relaxometry, online (1) H-NMR spectroscopy measured directly after size exclusion chromatographic (SEC, also known as GPC) separation and a combination of rheometry and TD-NMR relaxometry for highly viscous materials. Case studies are reviewed that underline the possibilities and challenges of the different hyphenated low-field NMR methods. Copyright © 2015 John Wiley & Sons, Ltd.
RESUMO
Medium-resolution nuclear magnetic resonance spectroscopy (MR-NMR) currently develops to an important analytical tool for both quality control and process monitoring. In contrast to high-resolution online NMR (HR-NMR), MR-NMR can be operated under rough environmental conditions. A continuous re-circulating stream of reaction mixture from the reaction vessel to the NMR spectrometer enables a non-invasive, volume integrating online analysis of reactants and products. Here, we investigate the esterification of 2,2,2-trifluoroethanol with acetic acid to 2,2,2-trifluoroethyl acetate both by (1) H HR-NMR (500 MHz) and (1) H and (19) F MR-NMR (43 MHz) as a model system. The parallel online measurement is realised by splitting the flow, which allows the adjustment of quantitative and independent flow rates, both in the HR-NMR probe as well as in the MR-NMR probe, in addition to a fast bypass line back to the reactor. One of the fundamental acceptance criteria for online MR-MNR spectroscopy is a robust data treatment and evaluation strategy with the potential for automation. The MR-NMR spectra are treated by an automated baseline and phase correction using the minimum entropy method. The evaluation strategies comprise (i) direct integration, (ii) automated line fitting, (iii) indirect hard modelling (IHM) and (iv) partial least squares regression (PLS-R). To assess the potential of these evaluation strategies for MR-NMR, prediction results are compared with the line fitting data derived from the quantitative HR-NMR spectroscopy. Although, superior results are obtained from both IHM and PLS-R for (1) H MR-NMR, especially the latter demands for elaborate data pretreatment, whereas IHM models needed no previous alignment. Copyright © 2015 John Wiley & Sons, Ltd.
RESUMO
Biofilms on cylindrical carrier material originating from a lab-scale moving bed biofilm reactor (MBBR) were investigated by means of Magnetic Resonance Imaging (MRI). The aim of this study was to determine the local flow velocities at the inner face of the biofilm carrier. To get an insight into the mass transport processes, flow velocity maps of blank and with biofilm cultivated carriers were measured. A single carrier was placed in a tube in three different orientations and exposed to flow velocities of 0.21, 0.42, and 0.64 mm/s. The interplay of the biofilm morphology and the local flow pattern was then analyzed including the effect of the orientation of the carrier in relation to the upstream flow angle. Within this study, the biofilm carrier can be understood as an interconnected system of four sections in which the incoming fluid volume will be distributed depending on the biomass occupation and morphology. In sections with high biofilm occupation, the flow resistance is increased. Depending on the orientation of the carrier in the flow field, this effect leads to flow evasion through less covered sections showing higher flow velocities and consequently the risk of biofilm detachment. However, there was no clear correlation between biofilm coverage and flow ratio.
Assuntos
Biofilmes , Reatores Biológicos , Imageamento por Ressonância Magnética/métodos , Biomassa , Desenho de EquipamentoRESUMO
Paramagnetic relaxation enhancement is often explored in magnetic resonance imaging in terms of contrast agents and in biomolecular nuclear magnetic resonance (NMR) spectroscopy for structure determination. New ultrahigh-spin clusters are investigated with respect to their NMR relaxation properties. As their molecular size and therefore motional correlation times as well as their electronic properties differ significantly from those of conventional contrast agents, questions about a comprehensive characterization arise. The relaxivity was studied by field-dependent longitudinal and transverse NMR relaxometry of aqueous solutions containing Fe(III)(10)Dy(III)(10) ultrahigh-spin clusters (spin ground state 100/2). The high-field limit was extended to 32.9 T by using a 24 MW resistive magnet and an ultrahigh-frequency NMR setup. Interesting relaxation dispersions were observed; the relaxivities increase up to the highest available fields, which indicates a complex interplay of electronic and molecular correlation times.
Assuntos
Elementos da Série dos Lantanídeos/química , Compostos Férricos/química , Espectroscopia de Ressonância Magnética , Marcadores de SpinRESUMO
As virtual reality (VR) has drastically evolved over the past few years, the field of applications of VR flourished way beyond the gaming industry. While commercial VR solutions might be available, there is a need to develop a workflow for specific applications. Bioprinting represents such an example. Here, complex 3D data is generated and needs to be visualized in the context of quality control. We demonstrate that the transfer to a commercially available VR software is possible by introducing an optimized workflow. In the present work, we developed a workflow for the visualization of the critical quality attribute (cQA) cell distribution in bioprinted (extrusion-based) samples in VR. The cQA cell distribution is directly influenced by the pre-processing step mixing of cell material in the bioink. Magnetic Resonance Imaging (MRI) was used as an analytical tool to generate spatially resolved 2.5 and 3D data of the bioprinted objects. A sample with poor quality in respect of the cQA cell distribution was identified as its inhomogeneous cell distribution could be displayed spatially resolved in VR. The described workflow facilitates the usage of VR as a tool for quality inspection in the field of bioprinting and represents a powerful tool for visualization of complex 3D MRI data.