Identification of TbPBN1 in Trypanosoma brucei reveals a conserved heterodimeric architecture for glycosylphosphatidylinositol-mannosyltransferase-I.

Glycosylphosphatidylinositol (GPI)-anchored proteins are found in all eukaryotes and are especially abundant on the surface of protozoan parasites such as Trypanosoma brucei. GPI-mannosyltransferase-I (GPI-MT-I) catalyzes the addition of the first of three mannoses that make up the glycan core of GPI. Mammalian and yeast GPI-MT-I consist of two essential subunits, the catalytic subunit PIG-M/Gpi14 and the accessory subunit PIG-X/Pbn1(mammals/yeast). T. brucei GPI-MT-I has been highlighted as a potential antitrypanosome drug target but has not been fully characterized. Here, we show that T. brucei GPI-MT-I also has two subunits, TbGPI14 and TbPBN1. Using TbGPI14 deletion, and TbPBN1 RNAi-mediated depletion, we show that both proteins are essential for the mannosyltransferase activity needed for GPI synthesis and surface expression of GPI-anchored proteins. In addition, using native PAGE and co-immunoprecipitation analyses, we demonstrate that TbGPI14 and TbPBN1 interact to form a higher-order complex. Finally, we show that yeast Gpi14 does not restore GPI-MT-I function in TbGPI14 knockout trypanosomes, consistent with previously demonstrated species specificity within GPI-MT-I subunit associations. The identification of an essential trypanosome GPI-MT-I subcomponent indicates wide conservation of the heterodimeric architecture unusual for a glycosyltransferase, leaving open the question of the role of the noncatalytic TbPBN1 subunit in GPI-MT-I function.

Complex DNA Architectonics─Self-Assembly of Amphiphilic Oligonucleotides into Ribbons, Vesicles, and Asterosomes.

The precise arrangement of structural subunits is a key factor for the proper shape and function of natural and artificial supramolecular assemblies. In DNA nanotechnology, the geometrically well-defined double-stranded DNA scaffold serves as an element of spatial control for the precise arrangement of functional groups. Here, we describe the supramolecular assembly of chemically modified DNA hybrids into diverse types of architectures. An amphiphilic DNA duplex serves as the sole structural building element of the nanosized supramolecular structures. The morphology of the assemblies is governed by a single subunit of the building block. The chemical nature of this subunit, i.e., polyethylene glycols of different chain length or a carbohydrate moiety, exerts a dramatic influence on the architecture of the assemblies. Cryo-electron microscopy revealed the arrangement of the individual DNA duplexes within the different constructs. Thus, the morphology changes from vesicles to ribbons with increasing length of a linear polyethylene glycol. Astoundingly, attachment of a N-acetylgalactosamine carbohydrate to the DNA duplex moiety produces an unprecedented type of star-shaped architecture. The novel DNA architectures presented herein imply an extension of the current concept of DNA materials and shed new light on the fast-growing field of DNA nanotechnology.

Supramolecular assembly of pyrene-DNA conjugates: influence of pyrene substitution pattern and implications for artificial LHCs.

The supramolecular self-assembly of pyrene-DNA conjugates into nanostructures is presented. DNA functionalized with different types of pyrene isomers at the 3'-end self-assemble into nano-objects. The shape of the nanostructures is influenced by the type of pyrene isomer appended to the DNA. Multilamellar vesicles are observed with the 1,6- and 1,8-isomers, whereas conjugates of the 2,7-isomer exclusively assemble into spherical nanoparticles. Self-assembled nano-spheres obtained with the 2,7-dialkynyl pyrene isomer were used for the construction of an artificial light-harvesting complex (LHC) in combination with Cy3 as the energy acceptor.

Merging of Azulene and Perylene Diimide for Optical pH Sensors.

Polycyclic aromatic hydrocarbons (PAHs) have emerged as promising materials for organic electronics, including organic photovoltaics (OPVs), organic field-effect transistors (OFETs), and organic light-emitting diodes (OLEDs). Particularly, non-hexagonal ring-fused PAHs are highly desirable due to their unique optoelectronic properties. Herein, a new redox-active azulene-perylene diimide triad 1 and its ring-fused counterpart, diazulenocoronene diimide 2, were synthesized and fully characterized by a combination of NMR, cyclic voltammetry, and UV-visible absorption spectroscopy. Direct comparison of their electronic properties leads us to the conclusion that a significant change in the localization of HOMO and LUMO occurs upon the fusion of azulene and perylene diimide in 2, leading to the lack of intramolecular charge-transfer character for transitions in the visible spectral region. Density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations were performed to gain further insight into various electronic transitions. Moreover, we found that the adaptive response to acids and bases manifests itself in a reversible two-color change that can be attributed to changes in the chemical structures. Our findings pave the way for manipulating the relative HOMO and LUMO energy levels of organic chromophores by fusing non-alternant azulenes to an otherwise flat PAH, which could possibly lead to applications in organic electronics and optical sensors.

Elimination of GPI2 suppresses glycosylphosphatidylinositol GlcNAc transferase activity and alters GPI glycan modification in Trypanosoma brucei.

Many eukaryotic cell-surface proteins are post-translationally modified by a glycosylphosphatidylinositol (GPI) moiety that anchors them to the cell membrane. The biosynthesis of GPI anchors is initiated in the endoplasmic reticulum by transfer of GlcNAc from UDP-GlcNAc to phosphatidylinositol. This reaction is catalyzed by GPI GlcNAc transferase, a multisubunit complex comprising the catalytic subunit Gpi3/PIG-A as well as at least five other subunits, including the hydrophobic protein Gpi2, which is essential for the activity of the complex in yeast and mammals, but the function of which is not known. To investigate the role of Gpi2, we exploited Trypanosoma brucei (Tb), an early diverging eukaryote and important model organism that initially provided the first insights into GPI structure and biosynthesis. We generated insect-stage (procyclic) trypanosomes that lack TbGPI2 and found that in TbGPI2-null parasites, (i) GPI GlcNAc transferase activity is reduced, but not lost, in contrast with yeast and human cells, (ii) the GPI GlcNAc transferase complex persists, but its architecture is affected, with loss of at least the TbGPI1 subunit, and (iii) the GPI anchors of procyclins, the major surface proteins, are underglycosylated when compared with their WT counterparts, indicating the importance of TbGPI2 for reactions that occur in the Golgi apparatus. Immunofluorescence microscopy localized TbGPI2 not only to the endoplasmic reticulum but also to the Golgi apparatus, suggesting that in addition to its expected function as a subunit of the GPI GlcNAc transferase complex, TbGPI2 may have an enigmatic noncanonical role in Golgi-localized GPI anchor modification in trypanosomes.

Flexible Superlubricity Unveiled in Sidewinding Motion of Individual Polymeric Chains.

A combination of low temperature atomic force microcopy and molecular dynamic simulations is used to demonstrate that soft designer molecules realize a sidewinding motion when dragged over a gold surface. Exploiting their longitudinal flexibility, pyrenylene chains are indeed able to lower diffusion energy barriers via on-surface directional locking and molecular strain. The resulting ultralow friction reaches values on the order of tens of pN reported so far only for rigid chains sliding on an incommensurate surface. Therefore, we demonstrate how molecular flexibility can be harnessed to realize complex nanomotion while retaining a superlubric character. This is in contrast with the paradigm guiding the design of most superlubric nanocontacts (mismatched rigid contacting surfaces).

Tetraphenylethylene-DNA conjugates: influence of sticky ends and DNA sequence length on the supramolecular assembly of AIE-active vesicles.

The supramolecular assembly of DNA conjugates, functionalized with tetraphenylethylene (TPE) sticky ends, into vesicular structures is described. The aggregation-induced emission (AIE) active TPE units allow monitoring the assembly process by fluorescence spectroscopy. The number of TPE modifications in the overhangs of the conjugates influences the supramolecular assembly behavior. A minimum of two TPE residues on each end are required to ensure a well-defined assembly process. The design of the presented DNA-based nanostructures offers tailored functionalization with applications in DNA nanotechnology.

Optically Controlled Electron Transfer in a ReI Complex.

Ultrafast optical control of intramolecular charge flow was demonstrated, which paves the way for photocurrent modulation and switching with a highly wavelength-selective ON/OFF ratio. The system that was explored is a fac-[Re(CO)3 (TTF-DPPZ)Cl] complex, where TTF-DPPZ=4',5'-bis(propylthio)tetrathiafulvenyl[i]dipyrido[3,2-a:2',3'-c]phenazine. DFT calculations and AC-Stark spectroscopy confirmed the presence of two distinct optically active charge-transfer processes, namely a metal-to-ligand charge transfer (MLCT) and an intra-ligand charge transfer (ILCT). Ultrafast transient absorption measurements showed that the ILCT state decays in the ps regime. Upon excitation to the MLCT state, only a long-lived 3 MLCT state was observed after 80 ps. Remarkably, however, the bleaching of the ILCT absorption band remained as a result of the effective inhibition of the HOMO-LUMO transition.

Sequential Bending and Twisting around C-C Single Bonds by Mechanical Lifting of a Pre-Adsorbed Polymer.

Bending and twisting around carbon-carbon single bonds are ubiquitous in natural and synthetic polymers. Force-induced changes were so far not measured at the single-monomer level, owing to limited ways to apply local forces. We quantified down to the submolecular level the mechanical response within individual poly-pyrenylene chains upon their detachment from a gold surface with an atomic force microscope at 5 K. Computer simulations based on a dedicated force field reproduce the experimental traces and reveal symmetry-broken bent and rotated conformations of the sliding physisorbed segment besides steric hindrance of the just lifted monomer. Our study also shows that the tip-molecule bond remains intact but remarkably soft and links force variations to complex but well-defined conformational changes.

Stimuli-Responsive Supramolecular Polymers from Amphiphilic Phosphodiester-Linked Azobenzene Trimers.

An amphiphilic phosphodiester-linked azobenzene trimer has been exploited in the development of stimuli-responsive, water-soluble supramolecular polymers. The trimer can reversibly undergo thermal and photoisomerization between Z- and E-isomers. Its self-assembly properties in aqueous medium have been investigated by spectroscopic and microscopic techniques, demonstrating that E- and Z-azobenzene trimers form supramolecular nanosheets and toroidal nanostructures, respectively. By virtue of the E/Z photoisomerization of the azobenzene units, the two different supramolecular morphologies can be switched by photoirradiation. The findings pave a way towards stimuli-responsive, water-soluble supramolecular polymers which hold great promise in the development of smart functional materials.

On-Surface Synthesis of Nitrogen-Doped Kagome Graphene.

Nitrogen-doped Kagome graphene (N-KG) has been theoretically predicted as a candidate for the emergence of a topological band gap as well as unconventional superconductivity. However, its physical realization still remains very elusive. Here, we report on a substrate-assisted reaction on Ag(111) for the synthesis of two-dimensional graphene sheets possessing a long-range honeycomb Kagome lattice. Low-temperature scanning tunneling microscopy (STM) and atomic force microscopy (AFM) with a CO-terminated tip supported by density functional theory (DFT) are employed to scrutinize the structural and electronic properties of the N-KG down to the atomic scale. We demonstrate its semiconducting character due to the nitrogen doping as well as the emergence of Kagome flat bands near the Fermi level which would open new routes towards the design of graphene-based topological materials.

Bottom-up Synthesis of Nitrogen-Doped Porous Graphene Nanoribbons.

Although methods for a periodic perforation and heteroatom doping of graphene sheets have been developed, patterning closely spaced holes on the nanoscale in graphene nanoribbons is still a challenging task. In this work, nitrogen-doped porous graphene nanoribbons (N-GNRs) were synthesized on Ag(111) using a silver-assisted Ullmann polymerization of brominated tetrabenzophenazine. Insights into the hierarchical reaction pathways from single molecules toward the formation of one-dimensional organometallic complexes and N-GNRs are gained by a combination of scanning tunneling microscopy (STM), atomic force microscopy (AFM) with CO-tip, scanning tunneling spectroscopy (STS), and density functional theory (DFT).

DNA-organized artificial LHCs - testing the limits of chromophore segmentation.

DNA-organized multi-chromophoric systems containing phenanthrene and pyrene derivatives exhibit a highly efficient excitation energy transfer from phenanthrene (donor) to pyrene (acceptor). The energy transfer also occurs if the phenanthrene antenna is interrupted by intervening DNA base pairs. Artificial light-harvesting complexes composed of up to five phenanthrene-DNA alternations with fluorescence quantum yields as high as 68% are described.

DNA-inspired oligomers: from oligophosphates to functional materials.

To exert its role of a functional polymer, DNA relies on a molecular self-assembly process that is driven by the interactions of only four units placed in a defined order. Extending the structural diversity of recognition motifs in DNA, to and beyond analogues of the nucleobases, will open doors to self-assembled materials with advanced programmable properties. DNA-inspired systems are becoming useful for numerous applications unachievable by the nucleic acids in their native composition. Potential applications of rationally designed oligo- and polyphosphodiesters reside in the areas of drug delivery, diagnostic signalling and imaging, in systems for efficient energy transfer or the precise ordering on the nanoscale. The field of DNA-inspired phosphodiesters highlights the general value and utility of precision in the composition of oligomers and polymers. In this tutorial review, we will summarize the approaches of directing the self-assembly of DNA-inspired, sequence-specific polyphosphodiesters into soft materials with unique properties. These data expose the so far underexploited potential of DNA-derived systems in solving some of the key issues in various technological areas, such as advanced biomaterials, morphologically defined soft matter or the controlled polymer folding and assembly. Moreover, precise positioning of structurally diverse molecules within a polymer chain creates unmatched opportunities for encoding information on the molecular level and transmitting it further to the microscopic and even macroscopic level via noncovalent interactions.

Nonenzymatic synthesis of anomerically pure, mannosyl-based molecular probes for scramblase identification studies.

The chemical synthesis of molecular probes to identify and study membrane proteins involved in the biological pathway of protein glycosylation is described. Two short-chain glycolipid analogs that mimic the naturally occurring substrate mannosyl phosphoryl dolichol exhibit either photoreactive and clickable properties or allow the use of a fluorescence readout. Both probes consist of a hydrophilic mannose headgroup that is linked to a citronellol derivative via a phosphodiester bridge. Moreover, a novel phosphoramidite chemistry-based method offers a straightforward approach for the non-enzymatic incorporation of the saccharide moiety in an anomerically pure form.

Nano-thin 2D Soft Materials - Design Principles and Prospects.

Established less than a decade ago, the fascinating field of two-dimensional (2D) soft materials is advancing continuously towards widespread recognition. After demonstrating the feasibility of obtaining nano-thin supramolecular sheets and morphologically related tubular objects, considerable efforts are being undertaken to explore the functional potential of soft nanosheets. Self-assembly is a major tool for the controlled formation of nanometre-sized 2D objects. In this account, we share our current understanding of the structural requirements to direct the self-assembly of water-soluble, negatively charged oligomers in 2D. The discussion covers some promising areas of utilization such as the reporting of weak mechanical perturbations, the assembly of light-harvesting antennae, the transfer of excitation energy and the polymerization of pre-organized assemblies. The systems presented in this work illustrate the potential of 2D supramolecular materials as complementary systems to their covalent counterparts.

Integrating DNA Photonic Wires into Light-Harvesting Supramolecular Polymers.

An approach combining DNA nanoscaffolds with supramolecular polymers for the efficient and directional propagation of light-harvesting cascades has been developed. A series of photonic wires with different arrangements of fluorophores in DNA-organized nanostructures were linked to light-harvesting supramolecular phenanthrene polymers (SPs) in a self-assembled fashion. Among them, a light-harvesting complex (LHC) composed of SPs and a photonic wire of phenanthrene, Cy3, Cy5, and Cy5.5 chromophores reveals a remarkable energy transfer efficiency of 59 %. Stepwise transfer of the excitation energy collected by the light-harvesting SPs via the intermediate Cy3 and Cy5 chromophores to the final Cy5.5 acceptor proceeds through a Förster resonance energy transfer mechanism. In addition, the light-harvesting properties are documented by antenna effects ranging from 1.4 up to 23 for different LHCs.

Supramolecular Assembly of DNA-Phenanthrene Conjugates into Vesicles with Light-Harvesting Properties.

Vesicle-shaped supramolecular polymers are formed by self-assembly of a DNA duplex containing phenanthrene overhangs at both ends. In the presence of spermine, the phenanthrene overhangs act as sticky ends linking the DNA duplexes together. In aqueous solution, the assembly leads to vesicles with a diameter in the range of 50-200 nm. Fluorescence measurements show that the assembled phenanthrene units act as light-harvesting complexes and transfer absorbed energy to an acceptor, such as pyrene or Cy3, which can either be directly added to the polymer or attached via a complementary DNA strand. The presence of DNA in the nanostructures allows the construction of light-harvesting vesicles that are amenable to derivatization with different functional groups.

Self-assembly of a redox-active bolaamphiphile into supramolecular vesicles.

The synthesis and self-assembly of a water-soluble bolaamphiphilic cyclopenta[hi]aceanthrylene derivative is described. Self-assembly in aqueous medium leads to the formation of supramolecular vesicles with intense absorption bands over an extended range of the UV/vis spectral region and a narrow HOMO-LUMO bandgap of 1.65 eV.

Structural insight into DNA-assembled oligochromophores: crystallographic analysis of pyrene- and phenanthrene-modified DNA in complex with BpuJI endonuclease.

The use of the DNA duplex as a supramolecular scaffold is an established approach for the assembly of chromophore aggregates. In the absence of detailed structural insight, the characterization of thus assembled oligochromophores is, today, largely based on solution-phase spectroscopy. Here, we describe the crystal structures of three DNA-organized chromophore aggregates. DNA hybrids containing non-nucleosidic pyrene and phenanthrene building blocks were co-crystallized with the recently described binding domain of the restriction enzyme BpuJI. Crystal structures of these complexes were determined at 2.7, 1.9 and 1.6 Å resolutions. The structures reveal aromatic stacking interactions between pyrene and/or phenanthrene units within the framework of the B-DNA duplex. In hybrids containing a single modification in each DNA strand near the end of the duplex, the two polyaromatic hydrocarbons are engaged in a face-to-face stacking orientation. Due to crystal packing and steric effects, the terminal GC base pair is disrupted in all three crystal structures, which results in a non-perfect stacking arrangement of the aromatic chromophores in two of the structures. In a hybrid containing a total of three pyrenes, crystal lattice induced end-to-end stacking of individual DNA duplexes leads to the formation of an extended aromatic π-stack containing four co-axially arranged pyrenes. The aromatic planes of the stacked pyrenes are oriented in a parallel way. The study demonstrates the value of co-crystallization of chemically modified DNA with the recombinant binding domain of the restriction enzyme BpuJI for obtaining detailed structural insight into DNA-assembled oligochromophores.