A Detailed Analysis of the Morphology of Fibrils of Selectively Mutated Amyloid ß (1-40).

A small library of rationally designed amyloid ß [Aß(1-40)] peptide variants is generated, and the morphology of their fibrils is studied. In these molecules, the structurally important hydrophobic contact between phenylalanine 19 (F19) and leucine 34 (L34) is systematically mutated to introduce defined physical forces to act as specific internal constraints on amyloid formation. This Aß(1-40) peptide library is used to study the fibril morphology of these variants by employing a comprehensive set of biophysical techniques including solution and solid-state NMR spectroscopy, AFM, fluorescence correlation spectroscopy, and XRD. Overall, the findings demonstrate that the introduction of significant local physical perturbations of a crucial early folding contact of Aß(1-40) only results in minor alterations of the fibrillar morphology. The thermodynamically stable structure of mature Aß fibrils proves to be relatively robust against the introduction of significantly altered molecular interaction patterns due to point mutations. This underlines that amyloid fibril formation is a highly generic process in protein misfolding that results in the formation of the thermodynamically most stable cross-ß structure.

The influence of the ΔK280 mutation and N- or C-terminal extensions on the structure, dynamics, and fibril morphology of the tau R2 repeat.

Tau is a microtubule-associated protein and is involved in microtubule assembly and stabilization. It consists of four repeats that bind to the microtubule. The ΔK280 deletion mutation in the tau R2 repeat region is directly associated with the development of the frontotemporal dementia parkinsonism linked to chromosome 17 (FTDP-17). This deletion mutation is known to accelerate tau R2 repeat aggregation. However, the secondary and the tertiary structures of the self-assembled ΔK280 tau R2 repeat mutant aggregates are still controversial. Moreover, it is unclear whether extensions by one residue in the N- or the C-terminus of this mutant can influence the secondary or the tertiary structure. Herein, we combine solid-state NMR, atomic force microscopy, electron microscopy and all-atom explicit molecular dynamics simulations to investigate the effects of the deletion mutation and the N- and the C-terminal extension of this mutant on the structure. Our main findings show that the deletion mutation induces the formation of small aggregates, such as oligomers, and reduces the formation of fibrils. However, the extensions in the N- or the C-terminus revealed more fibril formation than small aggregates. Further, in the deletion mutation only one structure is preferred, while the N- and the C-terminal extensions strongly lead to polymorphic states. Finally, our broad and combined experimental and computational techniques provide direct structural information regarding ΔK280 tau R2 repeat mutant aggregates and their extensions in the N- and C-terminii by one residue.

Biocompatible silicon surfaces through orthogonal click chemistries and a high affinity silicon oxide binding peptide.

Multifunctionality is gaining more and more importance in the field of improved biomaterials. Especially peptides feature a broad chemical variability and are versatile mediators between inorganic surfaces and living cells. Here, we synthesized a unique peptide that binds to SiO(2) with nM affinity. We equipped the peptide with the bioactive integrin binding c[RGDfK]-ligand and a fluorescent probe by stepwise Diels-Alder reaction with inverse electron demand and copper(I) catalyzed azide-alkyne cycloaddition. For the first time, we report the generation of a multifunctional peptide by combining these innovative coupling reactions. The resulting peptide displayed an outstanding binding to silicon oxide and induced a significant increase in cell spreading and cell viability of osteoblasts on the oxidized silicon surface.

An oxygen imaging system for medical applications: preliminary results.

The examination of functional processes in tissue is gaining importance in medical research. As a result the imaging and monitoring of biochemical parameters in vivo is the goal of many imaging methods. One key parameter in photodynamic therapy (PDT) is the molecular oxygen concentration. Two-dimensional monitoring of oxygen is demanded for PDT but has not yet been achieved. The use of optical methods provides a possible means of measuring molecular oxygen. The basis of this method is the measurement of the luminescence lifetime of a dye that is quenched by molecular oxygen. The molecular oxygen concentration can be monitored two-dimensionally by pixel-wise determination of the luminescence lifetime with a CCD-camera. A new O(2)-imaging system based on this principle is presented in this article. The dye Ru(bpy)(3)(2+) is quenched by molecular oxygen and was used in the first experiments with the system.

High quality reduced graphene oxide flakes by fast kinetically controlled and clean indirect UV-induced radical reduction.

This work highlights a surprisingly simple and kinetically controlled highly efficient indirect method for the production of high quality reduced graphene oxide (rGO) flakes via UV irradiation of aqueous dispersions of graphene oxide (GO), in which the GO is not excited directly. While the direct photoexcitation of aqueous GO (when GO is the only light-absorbing component) takes several hours of reaction time at ambient temperature (4 h) leading only to a partial GO reduction, the addition of small amounts of isopropanol and acetone (2% and 1%) leads to a dramatically shortened reaction time by more than two orders of magnitude (2 min) and a very efficient and soft reduction of graphene oxide. This method avoids the formation of non-volatile species and in turn contamination of the produced rGO and it is based on the highly efficient generation of reducing carbon centered isopropanol radicals via the reaction of triplet acetone with isopropanol. While the direct photolysis of GO dispersions easily leads to degradation of the carbon lattice of GO and thus to a relatively low electric conductivity of the films of flakes, our indirect photoreduction of GO instead largely avoids the formation of defects, keeping the carbon lattice intact. Mechanisms of the direct and indirect photoreduction of GO have been elucidated and compared. Raman spectroscopy, XPS and conductivity measurements prove the efficiency of the indirect photoreduction in comparison with the state-of-the-art reduction method for GO (hydriodic acid/trifluoroacetic acid). The rapid reduction times and water solvent containing only small amounts of isopropanol and acetone may allow easy process up-scaling for technical applications and low-energy consumption.

Chemical modification of a tetrapyrrole-type photosensitizer: tuning application and photochemical action beyond the singlet oxygen channel.

Reactive oxygen species (ROS) formed by light activated photosensitizers (PSs) are the hallmark of photodynamic therapy (PDT). It is generally accepted that commonly used PSs generate singlet oxygen ((1)O2) as the cell-toxic species via type II photosensitization. We explored here the consequences of chemical modification and the influence of the net charge of a cationic tetrahydroporphyrin derivative (THPTS) relative to the basic molecular structure on the red-shift of absorption, solubility, mechanistic features, and photochemical as well as cell-toxic activity. In order to shed light into the interplay between chemical modification driven intra- and intermolecular photochemistry, intermolecular interaction, and function, a number of different spectroscopic techniques were employed and our experimental studies were accompanied by quantum chemical calculations. Here we show that for THPTS neither (1)O2 nor other toxic ROS (superoxide and hydroxyl radicals) are produced directly in significant quantities in aqueous solution (although the formation of singlet oxygen is energetically feasible and as such observed in acetonitrile). Nevertheless, the chemically modified tetrapyrrole photosensitizer displays efficient cell toxicity after photoexcitation. The distribution and action of THPTS in rat bladder caricinoma AY27 cells measured with fluorescence lifetime imaging microscopy shows accumulation of the THPTS in lysosomes and efficient cell death after irradiation. We found evidence that THPTS in water works mainly via the type I mechanism involving the reduction rather than oxidation of the excited triplet state THPTS(T1) via efficient electron donors in the biosystem environment and subsequent electron transfer to produce ROS indirectly. These intriguing structure-activity relationships may indeed open new strategies and avenues in developing PSs and PDT in general.

Redox-switchable direction of photoinduced electron transfer in an Ru(bpy)3(2+)-viologen dyad.

Quenching of the 3MLCT excited state of [Ru(bpy)3]2+ (bpy=bipyridine) by the reduction products (MV*+ and MV0) of methyl viologen (MV2+) was studied by a combination of electrochemistry with laser flash photolysis or femtosecond pump-probe spectroscopy. Both for the bimolecular reactions and for the reactions in an Ru(bpy)3(2+)-MVn+ dyad, quenching by MV*+ and MV0 is reductive and gives the reduced ruthenium complex [Ru(bpy)3]+, in contrast to the oxidative quenching by MV2+. Rate constants of quenching (kq), and thermal charge recombination (krec) and cage escape yields (phi(ce)) were determined for the bimolecular reactions, and rates of forward (kf) and backward (kb) electron transfer in the dyad were measured for quenching by MV2+, MV*+, and MV0. The reactions in the dyad are very rapid, with values up to kf = 1.3 x 10(12) s(-1) for *Ru(bpy)3(2+)-MV*+. In addition, a long-lived (tau = 15 ps) vibrationally excited state of MV*+ with a characteristically structured absorption spectrum was detected; this was generated by direct excitation of the MV*+ moiety both at 460 and 600 nm. The results show that the direction of photoinduced electron transfer in a Ru(bpy)3-MV molecule can be switched by an externally applied bias.

Synthesis of oligothiophene-bridged bisporphyrins and study of the linkage dependence of the electronic coupling.

A set of twelve porphyrin dimers has been prepared to give information on how the type of connectivity between a porphyrin core and a bridge can influence the interporphyrin electronic interaction. The new porphyrin systems are substituted directly at the meso position with an oligothiophene chain tethered either with a single C-C sigma bond, a trans ethylenyl group, or a acetylenyl group. The compounds are easily obtained by palladium-catalyzed cross-coupling reactions (Stille, Heck, and Sonogashira) between 5-iodo-10,15,20-(3,5-ditert-butylphenyl)porphyrin and the appropriate oligothiophene derivative. This synthetic approach is straightforward and very effective for preparing oligothiophene-based prophyrin systems. The absorption spectra and the fluorescence properties of the dimers demonstrated the crucial importance of the characteristics of the chemical bond used to connect the bridge to the porphyrin unit. The magnitude of the electronic communication can thus be significantly modulated by altering the type of bond connectivity used to link the chromophore to the bridge. The present work shows that an oligothiophene spacer is a viable class of linker for connecting porphyrins, and that a quaterthiophene appended with ethynyl linkages affords a high electronic interaction over a distance as large as 28 A. A detailed computational study of these dimers has clarified the conditions needed for a conjugated system to behave as a molecular wire. These conditions are full planarity of the molecule and proper energy matching between the frontier orbitals of the bridge and the porphyrin. Intermolecular energy transfer in asymmetrical dyads composed of a zinc porphyrin and a freebase porphyrin has been studied by fluorescence spectroscopy. In all systems, this process is more than 98% efficient, and its rate constant decreases steadily in the order 4ZH > 1ZH > 3ZH approximately 2ZH. Thus, the largest rate (kEnT = 1.2 x 10(11) s-1) was found in the dyad linked with bisethynyl quaterthiophene, which represents the longest bridge within the series. These results clearly demonstrate that strong communication and also efficient photoinduced processes can be promoted over a large distance if the electronic structure of the molecular connector is appropriately chosen.