Extraction Optimization, Antioxidant, Cosmeceutical and Wound Healing Potential of Echinacea purpurea Glycerolic Extracts.

Echinacea purpurea is a plant with immunomodulating properties, often used in topical preparations for treatment of small superficial wounds. In the presented study, the best conditions for ultrasound-assisted extraction of caffeic acid derivatives (caftaric and cichoric acid) (TPA-opt extract), as well as the conditions best suited for preparation of the extract with high radical scavenging activity (RSA-opt extract), from E. purpurea aerial parts were determined. A Box-Behnken design based on glycerol content (%, w/w), temperature (°C), ultrasonication power (W) and time (min) as independent variables was performed. Antioxidant, antiaging and wound healing effects of the two prepared extracts were evaluated. The results demonstrate that glycerol extraction is a fast and efficient method for preparation of the extracts with excellent radical scavenging, Fe2+ chelating and antioxidant abilities. Furthermore, the extracts demonstrated notable collagenase, elastase and tyrosinase inhibitory activity, indicating their antiaging properties. Well-pronounced hyaluronidase-inhibitory activities, with IC50 values lower than 30 µL extract/mL, as well as the ability to promote scratch closure in HaCaT keratinocyte monolayers, even in concentrations as low as 2.5 µL extract/mL (for RSA-opt), demonstrate promising wound healing effects of E. purpurea. The fact that the investigated extracts were prepared using glycerol, a non-toxic and environmentally friendly solvent, widely used in cosmetics, makes them suitable for direct use in specialized cosmeceutical formulations.

Cryocornea - toward enhancing the capacity and throughput of ex vivo corneal model.

Objective: The objective of this study was to investigate the effects of the concentration of two intracellular (i.e. propylene glycol and glycerol) and four extracellular (i.e. dextran, hydroxypropyl methylcellulose, polyvinylpyrolidone, trehalose) cryoprotective agents as well as the effects of freeze-thawing procedures on the corneal cryoprotection.Significance: The corneal cryopreservation may possibly become the long-term storage technique of choice for collection of animal corneas suitable for ex vivo drug testing.Methods: The integrity of corneal barrier was evaluated by measurements of transepithelial electrical resistance.Results: Under the investigated experimental conditions the best result was obtained for slow freezing (2 h at -20 °C followed by 46 h at -70 °C) and rapid thawing (0.25 h at 34 °C) procedure where 20% (w/V) trehalose in Krebs Ringer buffer solution was used as extracellular cryoprotective agent.Conclusions: The selection of corneal freeze-thawing protocol as well as the optimal type and concentration of a cryoprotective agent allows the cryostorage of porcine corneal tissues with suitable TEER properties (cryocornea).

Tear fluid-eye drops compatibility assessment using surface tension.

OBJECTIVE: To evaluate the compatibility of commercially available eye drop surface tension with the tear film physiological range and to characterize commonly used ophthalmic excipients in terms of their surface activity under eye-biorelevant conditions. SIGNIFICANCE: There are a number of quality requirements for the eye drops (e.g. tonicity, pH, viscosity, refractive index) that needs to comply with the physiological parameters of the eye surface. However, the adjustment of surface tension properties of the eye drops to the normal range of surface tension at the air/tear fluid interface (40-46 mN/m) has received rather less attention thus far. Yet, the surface tension at the air/tear fluid interface is of vital importance for the normal function of the eye surface. METHODS: The surface tension compatibility of the isotonic aqueous solutions of commonly used ophthalmic excipients as well as 18 approved eye drops with the tear fluid have been evaluated using surface tension method. RESULTS: Each ophthalmic ingredient including the preservatives, solubilizing agents and thickening agents can influence the surface tension of the final formulation. In case of complex ophthalmic formulations one should also consider the possible interactions among excipients and consequent impact on overall surface activity. Out of 18 evaluated eye drops, three samples were within, 12 samples were below and three samples were above the physiological range of the tear fluid surface tension. CONCLUSIONS: Our results provide a rationale for clinical studies aiming to assess the correlation between the eye drops surface tension and the tear film (in)stability.

Powder form and stability of Pluronic mixed micelle dispersions for drug delivery applications.

The aim of this work was to optimize a formulation of the Pluronic® F127/L121 mixed micelle system and evaluate it in terms of stability upon dilution in biologically relevant media and to explore the possibility of preparing F127/L121 micelles in a powder form that can be simply reconstituted to an initial freshly made mixed micelle formulation. The mixed F127/L121 micelles were prepared at a relatively high concentration of Pluronics (1% w/w for both Pluronics) using two different methods (direct dissolution and film rehydration) with an external input of energy. The optimal preparation of the mixed F127/L121 micelles (hydrodynamic diameter (dh) = 75 nm, polydispersity index (PDI) = 0.287) was achieved using the film rehydration method followed by ultrasonication. Stability studies of the F127/L121 micelle system were performed at 25 °C and 37 °C and upon dilution in different biologically relevant media. The F127/L121 micelles were stable in phosphate buffered saline (PBS) upon 100-fold dilution for at least 10 d and in PBS containing bovine serum albumin upon 10 and 50-fold dilution for at least 48 and 12 h, respectively. A dry powdered form of the mixed micelles was prepared by freeze-drying after slow or fast freezing process. The influence of the type and amount of cryoprotectant on the prevention of F127/L121 micelles aggregation during the freeze-drying and reconstitution processes were evaluated. The use of trehalose (5%, w/w) and sucrose (2.5%, w/w) with slow and fast freezing process, respectively, resulted in a reconstituted product with mostly similar dh and PDI values of the fresh micelle formulation.

Functional Nanostructured Lipid Carrier-Enriched Hydrogels Tailored to Repair Damaged Epidermal Barrier.

In this study, a functional nanostructured lipid carriers (NLCs)-based hydrogel was developed to repair the damaged epidermal skin barrier. NLCs were prepared via a high-energy approach, using argan oil and beeswax as liquid and solid lipids, respectively, and were loaded with ceramides and cholesterol at a physiologically relevant ratio, acting as structural and functional compounds. Employing a series of surfactants and optimizing the preparation conditions, NLCs of 215.5 ± 0.9 nm in size and a negative zeta potential of -42.7 ± 0.9 were obtained, showing acceptable physical and microbial stability. Solid state characterization by differential scanning calorimetry and X-ray powder diffraction revealed the formation of imperfect crystal NLC-type. The optimized NLC dispersion was loaded into the gel based on sodium hyaluronate and xanthan gum. The gels obtained presented a shear thinning and thixotropic behavior, which is suitable for dermal application. Incorporating NLCs enhanced the rheological, viscoelastic, and textural properties of the gel formed while retaining the suitable spreadability required for comfortable application and patient compliance. The NLC-loaded gel presented a noticeable occlusion effect in vitro. It provided 2.8-fold higher skin hydration levels on the ex vivo porcine ear model than the NLC-free gel, showing a potential to repair the damaged epidermal barrier and nourish the skin actively.

Characterization of various deformable liposomes with metronidazole.

OBJECTIVE: The aim of this study was to investigate various deformable liposomes for their potential application for the vaginal administration of metronidazole. MATERIALS AND METHODS: Deformable liposomes composed of egg phosphatidylcholine (EPC) and various surfactants [sodium deoxycholate (SDCh), Tween 80 or Span 80] and conventional liposomes consisting of EPC and egg phosphatidylglycerol-sodium (EPG-Na) were prepared with and without metronidazole. Additionally, a freeze-thaw method was applied to both classes of vesicles (liposomes) containing the drug to improve its trapping capacity. All of the liposomes prepared were characterized and compared in terms of size, polydispersity, zeta potential, entrapment efficiency and their permeability on a Caco-2 cell monolayer. RESULTS AND DISCUSSION: Conventional liposomes, both with and without metronidazole, were larger than the deformable vesicles. The presence of ethanol in the preparations of the elastic EPC/SDCh and EPC/Tween 80 liposomes was found to affect the particle size in terms of reducing this parameter. Different types of vesicles were compared for their trapping efficiency of metronidazole and the highest entrapment was observed with conventional liposomes. However, deformable EPC/SDCh liposomes were found to enhance the permeability of metronidazole more effectively than the conventional liposomes based on the in vitro model of the epithelial barrier. CONCLUSION: These preliminary data indicate that EPC/SDCh liposomes may have a promising future in vaginal delivery of metronidazole. Therefore, additional investigations on elastic vesicles and their incorporation in a suitable vehicle should be considered to further evaluate their applicability in vaginal drug delivery.

Selection of Excipients for the Preparation of Vancomycin-Loaded Poly(D,L-lactide-co-glycolide) Microparticles with Extended Release by Emulsion Spray Drying.

The aim of this study was to relate the composition of the W/O emulsion used as a starting fluid in the spray-drying process to the quality of the dry polymer particles obtained in terms of physical-chemical properties, compatibility and drug release performance. Four W/O emulsions containing vancomycin hydrochloride (VAN), an encapsulating PLGA polymer and Poloxamer® 407, chitosan and/or sorbitan monooleate as stabilisers were spray-dried using an ultrasonic atomising nozzle. The microparticles obtained were micron-sized, with a volume mean diameter between 43.2 ± 0.3 and 64.0 ± 12.6 µm, and spherical with a mostly smooth, non-porous surface and with high drug loading (between 14.5 ± 0.6 and 17.1 ± 1.9% w/w). All formulations showed a prolonged and biphasic VAN release profile, with diffusion being the primary release mechanism. Microparticles prepared from the emulsions with Poloxamer® 407 and sorbitan monooleate released VAN rapidly and completely within one day. The release of VAN from microparticles prepared from the emulsion without additives or with chitosan in the inner aqueous phase was significantly decreased; after four days, a cumulative release of 65% and 61%, respectively, was achieved. Microparticles with encapsulated chitosan had the largest mean particle diameter and the slowest release of VAN.

Use of low-field NMR and rheology to evaluate the microstructure and stability of a poly(d,l-lactide-co-glycolide)-based W/O emulsion to be processed by spray drying.

Drug-loaded emulsions for spray drying should be optimised for their rheological behaviour and stability under operating conditions, as this is essential for achieving the desired physicochemical properties of the final dry product. Our aim was therefore to investigate the structure and stability of a water-in-oil (W/O) emulsion containing vancomycin hydrochloride as the active ingredient in the aqueous phase, poly(d,l-lactide-co-glycolide) as the structural polymer in the dichloromethane-based organic phase, and various stabilisers using low-field nuclear magnetic resonance (LF NMR) and rheological characterisation. Four emulsions were tested, namely-one without stabiliser, one with Poloxamer® 407, one with chitosan and Span™ 80 and one with chitosan only. The theoretical interpretation of the rheological data allowed the determination of the velocity and the shear rate/stress profiles inside the feed path of the W/O emulsion, aspects that are critical for the industrial scale-up of the emulsion drying process. In addition, LF NMR demonstrated that shaking was sufficient to restore the original emulsion structure and that the droplet size of all emulsions was in the range of 1-10 µm, although the emulsion with chitosan had the narrowest droplet size distribution and the higher zero shear viscosity, which accounts for the increased long-term stability due to impeded droplets movement.

Towards the development of a biorelevant in vitro method for the prediction of nanoemulsion stability on the ocular surface.

Ophthalmic oil-in-water nanoemulsions (NEs) are a complex technological platform, representing an advancement in the treatment of dry eye disease. In addition to enabling the incorporation of poorly soluble active pharmaceutical ingredients (APIs), NEs provide prolonged residence time of APIs and other formulation components and consequent replenishment and stabilization of the compromised tear film. Ophthalmic NEs have been on the market for over 20 years, but considering their complexity, as well as the complex nature of the ocular surface, they are still a poorly understood advanced dosage form. The objective of this study was to develop a biorelevant in vitro method that would be able to predict the behavior of ophthalmic NEs after application. With that goal, NE formulations differing in critical material attributes and critical formulation variables were employed and subjected to simulated tear turnover and blinking. By gradually increasing the complexity of the in vitro method, we were able to detect key parameters influencing NE stability. The undertaken study presents a step forward in the development of in vitro tools that are fundamental to the reliable, cost and time-effective development of innovative and generic topical ophthalmic NEs.

Hydroxypropyl-ß-Cyclodextrin-Based Helichrysum italicum Extracts: Antioxidant and Cosmeceutical Activity and Biocompatibility.

Two Helichrysum italicum extracts, OPT-1 (rich in phenolic acids) and OPT-2 (rich in total phenols and flavonoids), were prepared using hydroxypropyl-ß-cyclodextrin (HP-ß-CD)-assisted extraction. The prepared extracts were rich in phenolic compounds, including flavonoids and phenolic acids. GC-MS analysis of the extracts identified neryl acetate, neo-intermedeol, ß-selinene, γ-curcumene, italidione I, and nerol as the main volatile components of the extracts, as well as plant sterols, γ-sitosterol, campesterol, and stigmasterol. The antioxidant (DPPH radical scavenging, reducing power, and a carotene linoleic acid assay) and cosmeceutical (anti-hyaluronidase, anti-tyrosinase, anti-lipoxygenase, ovalbumin anti-coagulation, and a UV-absorption assay) activity of the extracts in most of the assays was better than the activity of the applied positive controls. Especially low were the IC50 values of the extracts in the anti-hyaluronidase (14.31 ± 0.29 µL extract/mL and 19.82 ± 1.53 µL extract/mL for OPT-1 and OPT-2, respectively) and the anti-lipoxygenase (0.96 ± 0.11 µL extract/mL and 1.07 ± 0.01 µL extract/mL for OPT-1 and OPT-2, respectively) assays. The extracts were non-toxic to HaCaT cells in concentrations of up to 62.5 µL extract/mL assuring their status as excellent candidates for cosmeceutical product development appropriate for direct use in cosmetic products without solvent evaporation.

In situ hydrogel containing diazepam-loaded nanostructured lipid carriers (DZP-NLC) for nose-to-brain delivery: development, characterization and deposition studies in a 3D-printed human nasal cavity model.

The nasal route has been investigated as a promising alternative for drug delivery to the central nervous system, avoiding passage through the blood-brain barrier and improving bioavailability. In this sense, it is necessary to develop and test the effectiveness of new formulations proposed for the management of neurological disorders. Thereby, the aim of this work was to develop and characterize an ion sensitive in situ hydrogel containing diazepam-loaded nanostructured lipid carriers (DZP-NLC) for nasal delivery in the treatment of epilepsy. Physical characterization of the developed formulations was performed and included the evaluation of rheological features, particle size, polydispersity index (PDI) and zeta potential (ZP) of an in situ hydrogel containing DZP-NLC. Afterwards, in vitro drug release, in vitro mucoadhesion and biocompatibility studies with RPMI 2650 nasal cells were performed. The in situ hydrogel containing DZP-NLC was aerosolized with a nasal spray device specifically designed for nose-to-brain delivery (VP7 multidose spray pump with a 232 N2B actuator) and characterized for droplet size distribution and spray cone angle. Finally, the deposition pattern of this hydrogel was evaluated in a 3D-printed human nasal cavity model. The developed in situ hydrogel containing DZP-NLC presented adequate characteristics for nasal administration, including good gelling ability, mucoadhesiveness and prolonged drug release. In addition, after inclusion in the hydrogel net, the particle size (81.79 ± 0.53 nm), PDI (0.21 ± 0.10) and ZP (-30.90 ± 0.10 mV), of the DZP-NLC remained appropriate for nose-to-brain delivery. Upon aerosolization in a nasal spray device, a suitable spray cone angle (22.5 ± 0.2°) and adequate droplet size distribution (Dv (90) of 317.77 ± 44.12 µm) were observed. Biocompatibility studies have shown that the developed formulation is safe towards RPMI 2650 cells in concentrations up to 100 µg/mL. Deposition studies on a 3D-printed human nasal cavity model revealed that the best nasal deposition profile was obtained upon formulation administration without airflow and at an angle from horizontal plane of 75°, resulting in 47% of administered dose deposited in the olfactory region and 89% recovery. The results of this study suggested that the intranasal administration of the developed in situ hydrogel containing DZP-NLC could be a promising alternative to the conventional treatments for epilepsy.

Chitosan-Based Thermogelling System for Nose-to-Brain Donepezil Delivery: Optimising Formulation Properties and Nasal Deposition Profile.

Donepezil nasal delivery strategies are being continuously investigated for advancing therapy in Alzheimer's disease. The aim of this study was to develop a chitosan-based, donepezil-loaded thermogelling formulation tailored to meet all the requirements for efficient nose-to-brain delivery. A statistical design of the experiments was implemented for the optimisation of the formulation and/or administration parameters, with regard to formulation viscosity, gelling and spray properties, as well as its targeted nasal deposition within the 3D-printed nasal cavity model. The optimised formulation was further characterised in terms of stability, in vitro release, in vitro biocompatibility and permeability (using Calu-3 cells), ex vivo mucoadhesion (using porcine nasal mucosa), and in vivo irritability (using slug mucosal irritation assay). The applied research design resulted in the development of a sprayable donepezil delivery platform characterised by instant gelation at 34 °C and olfactory deposition reaching a remarkably high 71.8% of the applied dose. The optimised formulation showed prolonged drug release (t1/2 about 90 min), mucoadhesive behaviour, and reversible permeation enhancement, with a 20-fold increase in adhesion and a 1.5-fold increase in the apparent permeability coefficient in relation to the corresponding donepezil solution. The slug mucosal irritation assay demonstrated an acceptable irritability profile, indicating its potential for safe nasal delivery. It can be concluded that the developed thermogelling formulation showed great promise as an efficient donepezil brain-targeted delivery system. Furthermore, the formulation is worth investigating in vivo for final feasibility confirmation.

Advances in Development, Characterisation and Application of Nasal Drug Delivery Systems.

Nasal drug administration is being extensively investigated for local and systemic drug delivery, brain targeting and mucosal vaccination [...].

In situ gelling nanosuspension as an advanced platform for fluticasone propionate nasal delivery.

In this work we present the development of in situ gelling nanosuspension as advanced form for fluticasone propionate nasal delivery. Drug nanocrystals were prepared by wet milling technique. Incorporation of drug nanocrystals into polymeric in situ gelling system with pectin and sodium hyaluronate as constitutive polymers was fine-tuned attaining appropriate formulation surface tension, viscosity and gelling ability. Drug nanonisation improved the release profile and enhanced formulation mucoadhesive properties. QbD approach combining formulation and administration parameters resulted in optimised nasal deposition profile, with 51.8% of the dose deposited in the middle meatus, the critical region in the treatment of rhinosinusitis and nasal polyposis. Results obtained in biocompatibility and physico-chemical stability studies confirmed the leading formulation potential for safe and efficient nasal corticosteroid delivery.

Tailoring functional spray-dried powder platform for efficient donepezil nose-to-brain delivery.

Shortcomings of oral donepezil administration in the treatment of Alzheimer's disease have paved the way for ongoing investigations towards more efficient and safe donepezil nose-to-brain delivery. Herein we present the development of advantageous powder platform for donepezil nose-to-brain delivery, coupling careful design of chitosan and mannitol-based carrier matrix with spray-drying technology advantages and early consideration of adequate nasal administration mode, employing QbD approach. Unprecedentedly, ultrasonic nozzle was used to atomise the drying feed in response to size-related requirements for nasal aerosol particles. The optimised spray-drying process resulted in free-flowable dry powder with a great majority of particles larger than 10 µm, ensuring localised nasal deposition upon aerosolization, as evidenced by using 3D-printed nasal cavity model. QbD approach coupling formulation, process and administration parameters enabled optimisation of drug deposition profile reaching tremendously high 65.5 % of the applied dose deposited in the olfactory region. The leading formulation exhibited favourable swelling, mucoadhesion, drug release and permeation-enhancing properties, suiting the needs for efficient brain-targeted delivery. Results of in vitro biocompatibility and physico-chemical stability studies confirmed the leading formulation potential for safe and efficient donepezil nose-to-brain delivery. The obtained results encourage extending the study to an appropriate in vivo model needed for the final proof-of-concept.

Short- and long-term stability of lyophilised melatonin-loaded lecithin/chitosan nanoparticles.

The aim of this study was to establish a freeze-drying process for melatonin-loaded lecithin/chitosan nanoparticles (NPs) to preserve their chemical and physical stability for a longer time period that what is possible in an aqueous suspension. Glucose and trehalose were investigated as potential excipients during freeze-drying of NP suspensions. Lecithin/chitosan NPs were characterised by mean diameter and zeta potential, ranging between 117.4 and 328.5 nm and 6.7 and 30.2 mV, respectively, depending on the lecithin type and chitosan content in the preparation. Melatonin loadings were up to 7.1%. For all lecithin/chitosan NPs, no notable differences in the mean particle size, size distribution, zeta potential or melatonin content were observed before or immediately after the lyophilisation process or after 7 months of storage at 4 °C. The residual moisture contents of lyophilisates with glucose and trehalose immediately after the lyophilisation process varied between 4.0-4.8% and 2.4-3.0%, respectively. All lecithin/chitosan NPs had a fully amorphous nature after the freeze-drying process, as indicated by modulated differential scanning calorimetry. NP lyophilisates with glucose had a low glass transition temperature (ca. 5 °C), confirming that lyophilisation with glucose as a cryoprotectant was not appropriate. All lyophilisates with trehalose had a glass transition temperature above the room temperature, allowing formation of the cake without a collapse of the structure, which was capable of preserving its characteristics and appearance following 7 months of storage at 4 °C.

Mupirocin calcium microencapsulation via spray drying: feed solvent influence on microparticle properties, stability and antimicrobial activity.

OBJECTIVES: The aim of this research was to design a controlled release, spray dried, mupirocin calcium-loaded microparticles (MP) with acrylic polymer and assess the influence of a feed solvent at preselected drug:polymer proportions (1:5 and 2:1 (w/w)) on the performance and stability of the prepared MP. METHODS: Physicochemical properties of MP were assessed using modulated differential scanning calorimetry (MDSC), and thermogravimetric analyses (TGA), Fourier transformed infrared spectroscopy (FTIR) and X-ray analyses and were correlated with drug release. Morphology and particle size were determined using low-angle laser light scattering and a scanning electron microscope. A time-kill assay was conducted on two strains of Staphylococcus aureus to evaluate the antimicrobial activity of MP. RESULTS AND DISCUSSION: The MP formed solid dispersions without apparent drug crystallization. Drug-polymer miscibility, morphology, drug release and consequently antimicrobial activity were dependent on drug loading (DL) and the used solvent. The superior control of drug release from MP was achieved for the higher DL (2:1 (w/w) drug:polymer proportion) using solvents in the following order: methanol ≈ methanol:ethanol (50:50, w/w) > isopropanol:acetone (40:60, w/w). Moreover, a time-kill assay performed on S. aureus (ATCC 29213) and methicillin-resistant S. aureus strains confirmed the prolonged release and preservation of antimicrobial activity of the microencapsulated drug. The physical aging of the solid dispersion after 10 months of storage had negligible impact on the MP performance. CONCLUSIONS: Acrylic-based MP were confirmed as suitable microcarriers for prolonged drug release using a well-established spray drying technique, while solvent influence was strongly related to the DL employed.

Lecithin/chitosan nanoparticles for transdermal delivery of melatonin.

In this study, the potential of lecithin/chitosan nanoparticles (NPs) as colloidal nanosystem for transdermal melatonin delivery was investigated. Mean diameter and zeta-potential of NPs differing in lecithin type (Lipoid S45 and S100) and chitosan content ranged between 113.7 and 331.5 nm and 4.6 and 31.2 mV, respectively. Melatonin loadings were up to 7.2%. The potential of lecithin/chitosan NPs to enhance transdermal melatonin delivery was investigated by determining the drug flux across dermatomed porcine skin and its skin deposition. Lecithin/chitosan NPs provided 1.3-2.3-fold higher flux compared to melatonin solution. The highest flux, 9.0 ± 0.21 µg/cm²/h, was observed for S45 lecithin/chitosan NPs with lecithin/chitosan weight ratio of 20:1. NP possible cytotoxicity in vitro was evaluated using human skin keratinocytes and fibroblasts. It was demonstrated that lecithin/chitosan NPs can be applied to skin cells at concentrations up to 200 µg/mL without inducing plasma membrane damage or cell viability decrease.

Spray dried microparticles for controlled delivery of mupirocin calcium: process-tailored modulation of drug release.

Spray dried microparticles containing mupirocin calcium were designed as acrylic matrix carriers with modulated drug release for efficient local drug delivery at minimum daily dose. Particle generation in spray drying and its effect on release performance were assessed by varying drug : polymer ratios with consequently altered initial saturations. Narrow-sized microparticles with mean diameters of 1.7-2.5 µm were obtained. Properties of the generated solid dispersions were examined by X-ray, thermal (thermogravimetric analysis, modulated differential scanning calorimetry) and spectroscopic (Fourier transformed infrared, Fourier transformed Raman) methods and correlated with drug loading and in vitro release. The best control over mupirocin release was achieved for 2 : 1 (w/w) drug : polymer ratio and found to be strongly process-dependent. For a particular ratio, increased feed concentration (>4%) boosted while increased inlet temperature (≥ 100 °C) reduced drug release. Antimicrobial activity testing confirmed that encapsulated drug preserved its antibacterial effectiveness. Conclusively, spray drying was proven as a suitable method for preparing structured microparticles which can control drug release even at exceptionally high drug loadings.

Impact of personality on acoustic tinnitus suppression and emotional reaction to stimuli sounds.

Background: Acoustic stimulation was shown to be effective in short-term suppression of tinnitus. However, tinnitus cannot be suppressed in all patients. Recent insights from mental health research suggests that personality traits may be important factors in prediction of treatment outcomes or improvement of tinnitus over time. No previous acoustic stimulation study investigated the effects of personality traits on tinnitus suppression and rating of sound stimuli. Objectives: The aim of this study was therefore to examine whether personality is capable to predict tinnitus suppression in chronic tinnitus patients as well as related emotional stimulus evaluation. Methods: Personality data (Big Five Index 2; BFI-2) of two acoustic stimulation experiments were pooled for this analysis. Both experiments were conducted at the University of Regensburg, Germany in the time period between April 2018 and October 2019 and consisted of individual designed noise and amplitude modulated tones matched to the participants' tinnitus pitch. Logistic regressions or linear mixed effect models were performed with tinnitus suppression as well as valence and arousal data as dependent variables and BFI-2 personality dimensions as predictors. Results: 28% of the participants showed pronounced short-term tinnitus suppression after acoustic stimulation (50% reduction in subjective tinnitus loudness). Analyzing BFI-2 data, no significant impact of the big five personality traits (neuroticism, agreeableness, extraversion, conscientiousness, openness) were found, neither on acoustic tinnitus suppression, nor on emotional stimulus evaluation, namely arousal. Conclusion: Personality was not shown to be a predictive factor, neither for acoustic stimulation, nor for emotional reaction to stimuli sounds in our studies. However, since tinnitus cannot be suppressed by acoustic stimulation in all patients, future studies should investigate other explaining factors such as patient-related or (neuro)physiological characteristics.