RESUMO
L-tryptophan is an amino acid that is essential to the metabolism of humans. Therefore, there is a high interest for its detection in biological fluids including blood, urine, and saliva for medical studies, but also in food products. Towards this goal, we report on a new electrochemiluminescence (ECL) method for L-tryptophan detection involving the in situ production of hydrogen peroxide at the surface of boron-doped diamond (BDD) electrodes. We demonstrate that the ECL response efficiency is directly related to H2O2 production at the electrode surface and propose a mechanism for the ECL emission of L-tryptophan. After optimizing the analytical conditions, we show that the ECL response to L-tryptophan is directly linear with concentration in the range of 0.005 to 1 µM. We achieved a limit of detection of 0.4 nM and limit of quantification of 1.4 nM in phosphate buffer saline (PBS, pH 7.4). Good selectivity against other indolic compounds (serotonin, 3-methylindole, tryptamine, indole) potentially found in biological fluids was observed, thus making this approach highly promising for quantifying L-tryptophan in a broad range of aqueous matrices of interest.
Assuntos
Boro , Diamante , Técnicas Eletroquímicas , Eletrodos , Medições Luminescentes , Triptofano , Triptofano/química , Triptofano/análise , Boro/química , Diamante/química , Técnicas Eletroquímicas/métodos , Medições Luminescentes/métodos , Humanos , Limite de Detecção , Técnicas Biossensoriais/métodos , Peróxido de Hidrogênio/análise , Peróxido de Hidrogênio/químicaRESUMO
A new method for the determination of skatole present in porcine adipose tissue samples utilizing the electrochemiluminescence of skatole is presented. It has been observed that oxygen radicals produced at a high cathodic voltage can react with oxidized skatole to create an excited intermediate molecule that then relaxes, generating peak photon emission at around 480 nm. A strong electrochemiluminescence or electrogenerated chemiluminescence (ECL) signal using boron-doped diamond (BDD) electrodes was observed optimally when a reduction potential of -1.8 V was applied, held for 40 s, before holding an oxidation potential of 0.8 V for 10 s. Using this principle, a calibration curve using known concentrations of skatole showed good linearity (range 0.025-2 µM) and a very low detection limit (LOD, 0.7 nM). A method that demonstrates for the first time an approach that utilizes this ECL reaction, and has the potential to be developed into an analytical device for use in the slaughterhouse, has been developed. This was achieved by extracting skatole out of the porcine adipose tissues into acetonitrile - giving an extraction efficiency of 67.6%. This method was then validated by analyzing the skatole content of 33 pig fat samples that had been previously tested using a standard technique, high-performance liquid chromatography (HPLC), containing a range of concentrations (0.02-2.58 µg/g). This ECL method exhibited excellent reliability and correlation with HPLC, giving a R2 coefficient of 0.911, thus demonstrating the potential for this method to be developed for an on-line skatole detector.
Assuntos
Diamante , Escatol , Tecido Adiposo/química , Animais , Eletrodos , Reprodutibilidade dos Testes , Escatol/análise , SuínosRESUMO
We report on the benefits of changing the bridging group X of bis-pyridyl ligands, that is, Py-X-Py where X is NH, CH2 , C(CH3 )2 , or PPh, on the photo- and electroluminescent properties of a new family of luminescent cationic H-heterocyclic carbene (NHC) copper(I) complexes. A joint experimental and theoretical study demonstrates that the bridging group affects the molecular conformation from a planar-like structure (X is NH and CH2 ) to a boat-like structure (X is C(CH3 )2 and PPh), leading to i)â four-fold enhancement of the photoluminescence quantum yield (Ïem ) without affecting the thermally activated delayed fluorescence mechanism, and ii)â one order of magnitude reduction of the ionic conductivity (σ) of thin films. This leads to an overall enhancement of the device efficacy and luminance owing to the increased Ïem and the use of low applied driving currents.
RESUMO
When new materials appear as potential alternatives for radiation detection, several criteria have to be fulfilled. The one presented herein is the response variation to large irradiation doses of neutron/gamma discriminating plastic scintillators. Thus, several samples were exposed to high gamma doses reaching 10 kGy. They were characterized in terms of gamma spectrometry and fast neutron/gamma discrimination, prior to and after irradiation. Results show an unexpected increase of the figure of merit (FoM), which is the numerical value for n/γ discrimination performances. An in-depth investigation evaluates the physicochemical impact of such large doses within the material. The characterization includes photophysics, radiation/matter interaction and chemical analyses (EPR, 1H NMR, fluorescence spectroscopy and HRMS).
RESUMO
The synthesis, photophysical properties, and applications in scintillation counting of N-(2-ethylhexyl)carbazole (EHCz) are reported. This molecule displays all of the required characteristics for an efficient liquid scintillator (emission wavelength, scintillation yield), and can be used without any extra fluorophores. Thus, its scintillation properties are discussed, as well as its fast neutron/gamma discrimination. For the latter application, the material is compared with the traditional liquid scintillator BC-501 A, and other liquid fluorescent molecules classically used as scintillation solvents, such as xylene, pseudocumene (PC), linear alkylbenzenes (LAB), diisopropylnaphthalene (DIN), 1-methylnaphthalene (1-MeNapht), and 4-isopropylbiphenyl (iPrBiph). For the first time, an excimeric form of a molecule has been advantageously used in scintillation counting. A moderate discrimination between fast neutrons and gamma rays was observed in bulk EHCz, with an apparent neutron/gamma discrimination potential half of that of BC-501 A.
RESUMO
Recent developments of plastic scintillators are reviewed, from 2000 to March 2014, distributed in two different chapters. First chapter deals with the chemical modifications of the polymer backbone, whereas modifications of the fluorescent probe are presented in the second chapter. All examples are provided with the scope of detection of various radiation particles. The main characteristics of these newly created scintillators and their detection properties are given.
RESUMO
The surface relief gratings (SRGs) can be generated when azo-polymer films are exposed to laser beam interference as a result of mass migration. Despite considerable research effort over the past two decades this complex phenomenon remains incompletely understood. Here we show, for the first time, the athermal photofluidisation of azo-polysiloxane films exposed to 488 nm light, directly monitored by optical microscopy. A process of surface relief erasure occurring in parallel with its inscription was also observed during laser irradiation. We therefore propose a new mechanism of SRG formation, based on three different processes: (1) the polymer photo-fluidization in illuminated regions, (2) the mass displacement from illuminated to dark regions and (3) the inverse mass displacement, from dark to illuminated regions. The mechanical properties of the films during UV light irradiation were investigated by classical rheology and, for the first time, by using amplitude modulation-frequency modulation atomic force microscopy (AM-FM AFM).
RESUMO
We describe the synthesis of new cationic tricoordinated copper complexes bearing bidentate pyridine-type ligands and N-heterocyclic carbene as ancillary ligands. These cationic copper complexes were fully characterized by NMR, electrochemistry, X-ray analysis, and photophysical studies in different environments. Density functional theory calculations were also undertaken to rationalize the assignment of the electronic structure and the photophysical properties. These tricoordinated cationic copper complexes possess a stabilizing CH-π interaction leading to high stability in both solid and liquid states. In addition, these copper complexes, bearing dipyridylamine ligands having a central nitrogen atom as potential anchoring point, exhibit very interesting luminescent properties that render them potential candidates for organic light-emitting diode applications.
RESUMO
This work presents an outline of a detection system that employs the Compton spectrometer method to assess the non-linearity of scintillator light yield. A novel approach is introduced, leading to more accurate measurements through the separate determination of the intrinsic light output parameters and the non-linearity of the scintillators. Key features of this system include the use of a portable scintillation detector with three photomultiplier tubes for precise measurement of the average number of detected photoelectrons and the incorporation of recent advancements in correction techniques for accidental coincidences. The integration of digital acquisition, offline data analysis, and geometric adaptation reduces the time required to perform a measurement. The developed detector can simultaneously measure different timing properties, as well as the relative intensities following ionization excitation in a scintillator. The system's performance is demonstrated through measurements of the light yield dependence on the deposited energy for commercially available liquid, plastic, and inorganic scintillators. Such instrumentation serves as a valuable tool in the development of novel scintillating materials, including liquid or solid organic scintillators, inorganic scintillators, and composite scintillators for electron detection, in addition to traditional X-ray or γ -ray detection.
RESUMO
It is shown that lasing can be achieved in commercial organic liquid scintillators. Using a dynamic grating induced by an interference pattern in the scintillator volume, distributed feedback lasing is shown to occur in four out of five commercial liquid scintillators that have been investigated. Although these scintillators are not designed for lasing application, their purpose being to measure radioactivity, induction of a laser effect, furthermore with a tuning range of approximately 30 nm, has been attained.
RESUMO
Highly pure millimeter-sized MOF-5 single crystals were synthesized and characterized. Photoluminescence (PL) spectroscopy and time-correlated single photon counting (TCSPC) demonstrate a solvent-guest dependency of MOF-5 emission and its ligand-centred nature. These results allow measuring the true MOF-5 luminescence free of solvent at a wavelength of 355 nm, a significantly lower wavelength than previously published. MOF-5 emission was also evaluated with different solvents and various degrees of water intake, explaining previously published observations. Comparison between lifetimes shows the fluorophore stabilization within the frameworks and demonstrates the progressive influence of the Zn4O subunits on the fluorescence during hydration. Overall, this work highlights the necessity to obtain phase-pure material, especially when moisture sensitivity can play a role, before ascribing electronic transitions. This study is a rigorous new take on the iconic MOF-5 and on its photoluminescence properties.
RESUMO
This study presents the influence of various substituents on the photophysical features of heteroleptic copper(I) complexes bearing both N-heterocyclic carbene (NHC) and dipyridylamine (dpa = dipyridylamine skeleton corresponding to ligand L1) ligands. The luminescent properties have been compared to our recently reported archetypal blue emitting [Cu(IPr)(dpa)][PF6] complex. The choice of the substituents on both ligands has been guided to explore the effect of the electron donor/acceptor and "push-pull" on the emission wavelengths and photoluminescence quantum yields. A selection of the best candidates in terms of their photophysical features were applied for developing the first blue light-emitting electrochemical cells (LECs) based on copper(I) complexes. The device analysis suggests that the main concern is the moderate redox stability of the complexes under high applied driving currents, leading to devices with moderate stabilities pointing to a proof-of-concept for further development. Nevertheless, under low applied driving currents the blue emission is stable, showing performance levels competitive to those reported for blue LECs based on iridium(III) complexes. Overall, this work provides valuable guidelines to tackle the design of enhanced NHC copper complexes for lighting applications in the near future.
RESUMO
By combining the sensitivity of fluorescent units with the response of "smart" polymers to environmental changes, we propose a new approach for chemical detection applications. The system proved to be sensitive to 12 ppb of diethyl chlorophosphate (DCP), a Sarin surrogate, and to discriminate between the interfering molecules.
Assuntos
Substâncias para a Guerra Química/análise , Corantes Fluorescentes/química , Compostos Organofosforados/análise , Polímeros/química , Sarina/análogos & derivados , Limite de Detecção , Espectrometria de Fluorescência/métodosRESUMO
The paper introduces a new class of materials with azo-polysiloxanic structure bearing the property to generate nano-structured surfaces by laser irradiation. The ability to modulate the optical response of the film, through a modification of the polymer chemical structure, has been investigated. The azo-materials were tested for their ability to support cell adhesion and growth, with very promising results. A future use of these materials as growth support in cell cultures is of great interest, due to an easy, one step-method to generate the surface relief grating and to the possibility to introduce a large range of chemical modifications due to the presence of the chlorobenzyl groups in the polymeric side-chain.
Assuntos
Compostos Azo/farmacologia , Técnicas de Cultura de Células/métodos , Siloxanas/farmacologia , Compostos Azo/química , Linhagem Celular Tumoral , Células Cultivadas , Imunofluorescência , Humanos , Microscopia de Força Atômica , Siloxanas/químicaRESUMO
We report herein the design, synthesis, and biological screening of a series of 15 disulfide prodrugs as precursors of albitiazolium bromide (T3/SAR97276, compound 1), a choline analogue which is currently being evaluated in clinical trials (phase II) for severe malaria. The corresponding prodrugs are expected to revert back to the active bis-thiazolium salt through an enzymatic reduction of the disulfide bond. To enhance aqueous solubility of these prodrugs, an amino acid residue (valine or lysine) or a phosphate group was introduced on the thiazolium side chain. Most of the novel derivatives exhibited potent in vitro antimalarial activity against P. falciparum. After oral administration, the cyclic disulfide prodrug 8 showed the best improvement of oral efficacy in comparison to the parent drug.
Assuntos
Antimaláricos/síntese química , Dissulfetos/síntese química , Pró-Fármacos/síntese química , Tiazóis/síntese química , Animais , Antimaláricos/química , Antimaláricos/farmacologia , Dissulfetos/química , Dissulfetos/farmacologia , Malária/tratamento farmacológico , Camundongos , Plasmodium falciparum/efeitos dos fármacos , Pró-Fármacos/química , Pró-Fármacos/farmacologia , Estereoisomerismo , Relação Estrutura-Atividade , Tiazóis/química , Tiazóis/farmacologiaRESUMO
Although commercialized inhibitors of active site serine beta-lactamases are currently used in coadministration with antibiotic therapy, no clinically useful inhibitors of metallo-beta-lactamases (MBLs) have yet been discovered. In this paper, we investigated the inhibitory effect of mercaptophosphonate derivatives against the three subclasses of MBLs (B1, B2, and B3). All 14 tested mercaptophosphonates, with the exception of 1a, behaved as competitive inhibitors for the three subclasses. Apart from 13 and 21, all the mercaptophosphonates tested exhibit a good inhibitory effect on the subclass B2 MBL CphA with low inhibition constants (K(i) < 15 muM). Interestingly, compound 18 turned out to be a potent broad spectrum MBL inhibitor. The crystallographic structures of the CphA-10a and CphA-18 complexes indicated that the sulfur atom of 10a and the phosphonato group of 18 interact with the Zn(2+) ion, respectively. Molecular modeling studies of the interactions between compounds 10a and 18 and the VIM-4 (B1), CphA (B2), and FEZ-1 (B3) enzymes brought to light different binding modes depending on the enzyme and the inhibitor, consistent with the crystallographic structures.
Assuntos
Inibidores Enzimáticos/química , Organofosfonatos/farmacologia , Compostos de Sulfidrila/farmacologia , Inibidores de beta-Lactamases , Sítios de Ligação , Cristalografia por Raios X , Inibidores Enzimáticos/síntese química , Inibidores Enzimáticos/farmacologia , Concentração Inibidora 50 , Cinética , Espectroscopia de Ressonância Magnética , Espectrometria de Massas , Modelos Moleculares , Organofosfonatos/síntese química , Organofosfonatos/química , Espectroscopia de Infravermelho com Transformada de Fourier , Compostos de Sulfidrila/síntese química , Compostos de Sulfidrila/química , beta-Lactamases/química , beta-Lactamases/metabolismoRESUMO
The tridentate dianionic ligand 2-[2'-(hydroxyisopropoxyphosphoryl)phenylsulfanyl]benzoate (L(2-)) reacts with cis-[Pt(NH(3))(2)(H(2)O)(2)](2+) to form an S,O-chelate in which the O-coordinated group is either carboxylate or phosphonate, depending on the degree of protonation of the complex. Carboxylate appears to be the stronger ligand, and the stoichiometric reaction between cis-[Pt(NH(3))(2)(H(2)O)(2)](2+) and L(2-) yields the neutral species [Pt(L)(NH(3))(2)], with L bound by sulfanyl and carboxylate groups, both in solution and in the solid state. Upon protonation of [Pt(L)(NH(3))(2)], the stronger basicity of the carboxylate causes the Pt coordination to switch from carboxylate to phosphonate, and the uncoordinated carboxylate group becomes protonated. In methanolic solution, the first-order kinetics of this rearrangement could be observed by (31)P NMR spectroscopy. Both complexes-the carboxylate-bound neutral complex [Pt(L)(NH(3))(2)].H(2)O (triclinic, P1 (no. 2), a=9.529(6), b=9.766(6), c=12.299(7) angstroms, alpha=106.91(2), beta=101.71(2), gamma=102.05(2) degrees, Z=2) and the perchlorate salt of the phosphonate-bound complex [Pt(LH)(NH(3))(2)]ClO(4).H(2)O (monoclinic, P2(1)/c (no. 14), a=12.095(2), b=14.046(2), c=14.448(2) angstroms, beta=95.55(2) degrees, Z=4)-were characterized by X-ray crystallography.