A contact binary satellite of the asteroid (152830) Dinkinesh.

Asteroids with diameters less than about 5 km have complex histories because they are small enough for radiative torques (that is, YORP, short for the Yarkovsky-O'Keefe-Radzievskii-Paddack effect)1 to be a notable factor in their evolution2. (152830) Dinkinesh is a small asteroid orbiting the Sun near the inner edge of the main asteroid belt with a heliocentric semimajor axis of 2.19 AU; its S-type spectrum3,4 is typical of bodies in this part of the main belt5. Here we report observations by the Lucy spacecraft6,7 as it passed within 431 km of Dinkinesh. Lucy revealed Dinkinesh, which has an effective diameter of only 720 m, to be unexpectedly complex. Of particular note is the presence of a prominent longitudinal trough overlain by a substantial equatorial ridge and the discovery of the first confirmed contact binary satellite, now named (152830) Dinkinesh I Selam. Selam consists of two near-equal-sized lobes with diameters of 210 m and 230 m. It orbits Dinkinesh at a distance of 3.1 km with an orbital period of about 52.7 h and is tidally locked. The dynamical state, angular momentum and geomorphologic observations of the system lead us to infer that the ridge and trough of Dinkinesh are probably the result of mass failure resulting from spin-up by YORP followed by the partial reaccretion of the shed material. Selam probably accreted from material shed by this event.

The First Samples from Almahata Sitta Showing Contacts Between Ureilitic and Chondritic Lithologies: Implications for the Structure and Composition of Asteroid 2008 TC3.

Almahata Sitta (AhS), an anomalous polymict ureilite, is the first meteorite observed to originate from a spectrally classified asteroid (2008 TC3). However, correlating properties of the meteorite with those of the asteroid is not straightforward because the AhS stones are diverse types. Of those studied prior to this work, 70-80% are ureilites (achondrites) and 20-30% are various types of chondrites. Asteroid 2008 TC3 was a heterogeneous breccia that disintegrated in the atmosphere, with its clasts landing on Earth as individual stones and most of its mass lost. We describe AhS 91A and AhS 671, which are the first AhS stones to show contacts between ureilitic and chondritic materials and provide direct information about the structure and composition of asteroid 2008 TC3. AhS 91A and AhS 671 are friable breccias, consisting of a C1 lithology that encloses rounded to angular clasts (<10 µm to 3 mm) of olivine, pyroxenes, plagioclase, graphite, and metal-sulfide, as well as chondrules (~130-600 µm) and chondrule fragments. The C1 material consists of fine-grained phyllosilicates (serpentine and saponite) and amorphous material, magnetite, breunnerite, dolomite, fayalitic olivine (Fo 28-42), an unidentified Ca-rich silicate phase, Fe,Ni sulfides, and minor Ca-phosphate and ilmenite. It has similarities to CI1 but shows evidence of heterogeneous thermal metamorphism. Its bulk oxygen isotope composition (δ18O = 13.53‰, δ17O = 8.93‰) is unlike that of any known chondrite, but similar to compositions of several CC-like clasts in typical polymict ureilites. Its Cr isotope composition is unlike that of any known meteorite. The enclosed clasts and chondrules do not belong to the C1 lithology. The olivine (Fo 75-88), pyroxenes (pigeonite of Wo ~10 and orthopyroxene of Wo ~4.6), plagioclase, graphite, and some metal-sulfide are ureilitic, based on mineral compositions, textures, and oxygen isotope compositions, and represent at least six distinct ureilitic lithologies. The chondrules are probably derived from type 3 OC and/or CC, based on mineral and oxygen isotope compositions. Some of the metal-sulfide clasts are derived from EC. AhS 91A and AhS 671 are plausible representatives of the bulk of the asteroid that was lost. Reflectance spectra of AhS 91A are dark (reflectance ~0.04-0.05) and relatively featureless in VNIR, and have an ~2.7 µm absorption band due to OH- in phyllosilicates. Spectral modeling, using mixtures of laboratory VNIR reflectance spectra of AhS stones to fit the F-type spectrum of the asteroid, suggests that 2008 TC3 consisted mainly of ureilitic and AhS 91A-like materials, with as much as 40-70% of the latter, and <10% of OC, EC and other meteorite types. The bulk density of AhS 91A (2.35 ± 0.05 g/cm3) is lower than bulk densities of other AhS stones, and closer to estimates for the asteroid (~1.7-2.2 g/cm3). Its porosity (36%) is near the low end of estimates for the asteroid (33-50%), suggesting significant macroporosity. The textures of AhS 91A and AhS 671 (finely comminuted clasts of disparate materials intimately mixed) support formation of 2008 TC3 in a regolith environment. AhS 91A and AhS 671 could represent a volume of regolith formed when a CC-like body impacted into already well-gardened ureilitic + impactor-derived debris. AhS 91A bulk samples do not show a solar wind (SW) component, so they represent sub-surface layers. AhS 91A has a lower cosmic ray exposure (CRE) age (~5-9 Ma) than previously studied AhS stones (11-22 Ma). The spread in CRE ages argues for irradiation in a regolith environment. AhS 91A and AhS 671 show that ureilitic asteroids could have detectable ~2.7 µm absorption bands.

The Crystal Structure of Orthocetamol Solved by 3D Electron Diffraction.

Orthocetamol is a regioisomer of the well-known pain medication paracetamol and a promising analgesic and an anti-arthritic medicament itself. However, orthocetamol cannot be grown as single crystals suitable for X-ray diffraction, so its crystal structure has remained a mystery for more than a century. Here, we report the ab-initio structure determination of orthocetamol obtained by 3D electron diffraction, combining a low-dose acquisition method and a dedicated single-electron detector for recording the diffracted intensities. The structure is monoclinic, with a pseudo-tetragonal cell that favors multiple twinning on a scale of a few tens of nanometers. The successful application of 3D electron diffraction to orthocetamol introduces a new gold standard of total structure solution in all cases where X-ray diffraction and electron-microscope imaging methods fail.

Enhancing the early home learning environment through a brief group parenting intervention: study protocol for a cluster randomised controlled trial.

BACKGROUND: The quality of the home learning environment has a significant influence on children's language and communication skills during the early years with children from disadvantaged families disproportionately affected. This paper describes the protocol and participant baseline characteristics of a community-based effectiveness study. It evaluates the effects of 'smalltalk', a brief group parenting intervention (with or without home coaching) on the quality of the early childhood home learning environment. METHODS/DESIGN: The study comprises two cluster randomised controlled superiority trials (one for infants and one for toddlers) designed and conducted in parallel. In 20 local government areas (LGAs) in Victoria, Australia, six locations (clusters) were randomised to one of three conditions: standard care (control); smalltalk group-only program; or smalltalk plus (group program plus home coaching). Programs were delivered to parents experiencing socioeconomic disadvantage through two existing age-based services, the maternal and child health service (infant program, ages 6-12 months), and facilitated playgroups (toddler program, ages 12-36 months). Outcomes were assessed by parent report and direct observation at baseline (0 weeks), post-intervention (12 weeks) and follow-up (32 weeks). Primary outcomes were parent verbal responsivity and home activities with child at 32 weeks. Secondary outcomes included parenting confidence, parent wellbeing and children's communication, socio-emotional and general development skills. Analyses will use intention-to-treat random effects ("multilevel") models to account for clustering. RECRUITMENT AND BASELINE DATA: Across the 20 LGAs, 986 parents of infants and 1200 parents of toddlers enrolled and completed baseline measures. Eighty four percent of families demonstrated one or more of the targeted risk factors for poor child development (low income; receives government benefits; single, socially isolated or young parent; culturally or linguistically diverse background). DISCUSSION: This study will provide unique data on the effectiveness of a brief group parenting intervention for enhancing the early home learning environment of young children from disadvantaged families. It will also provide evidence of the extent to which additional one-on-one support is required to achieve change and whether there are greater benefits when delivered in the 1st year of life or later. The program has been designed for scale-up across existing early childhood services if proven effective. TRIAL REGISTRATION: 8 September 2011; ACTRN12611000965909 .

Delay in post-ovariectomy estrogen replacement negates estrogen-induced augmentation of post-exercise muscle satellite cell proliferation.

This study examined the effects of a delay in post-ovariectomy replacement of 17ß-estradiol (estrogen) on the post-exercise proliferation of muscle satellite cells. Nine-week-old, ovariectomized, female Sprague-Dawley rats (n = 64) were distributed among 8 groups based on estrogen status (0.25 mg estrogen pellet or sham), exercise status (90 min run at 17 m·min(-1) and a grade of -13.5° or unexercised), and estrogen replacement ("proximal", estrogen replacement within 2 weeks; or "delayed", estrogen replacement at 11 weeks following ovariectomy). Significant increases in satellite cells were found in the soleus and white gastrocnemius muscle (immunofluorescent colocalization of nuclei with Pax7) 72 h following eccentric exercise (p < 0.05) in all exercised groups. Proximal E2 replacement resulted in a further augmentation of muscle satellite cells in exercised rats (p < 0.05) relative to the delayed estrogen replacement group. Expression of PI3K was unaltered and phosphorylation of Akt relative to total Akt increased following estrogen supplementation and exercise. Exercise alone did not alter the expression levels of Akt. An 11 week delay in post-ovariectomy estrogen replacement negated the augmenting influence seen with proximal (2 week delay) post-ovariectomy estrogen replacement on post-exercise muscle satellite cell proliferation. This effect appears to be independent of the PI3K-Akt signaling pathway.

Adolescents with type 1 diabetes: parental perceptions of child health and family functioning and their relationship to adolescent metabolic control.

BACKGROUND: Adolescents with Type 1 diabetes (T1D) show less effective metabolic control than other age groups, partly because of biological changes beyond their control and partly because in this period of developmental transition, psychosocial factors can militate against young people upholding their lifestyle and medical regimens. Parents have an important role to play in supporting adolescents to self-manage their disease, but resultant family tensions can be high. In this study, we aimed to assess family functioning and adolescent behaviour/ adjustment and examine the relationships between these parent-reported variables and adolescent metabolic control (HbA1c), self-reported health and diabetes self-care. METHOD: A sample of 76 parents of Australian adolescents with T1D completed the Child Health Questionnaire -Parent form. Their adolescent child with T1D provided their HbA1c level from their most recent clinic visit, their self-reported general health, and completed a measure of diabetes self-care. RESULTS: Parent-reported family conflict was high, as was disease impact on family dynamics and parental stress. Higher HbA1c (poorer metabolic control) and less adequate adolescent self-care were associated with lower levels of family functioning, more adolescent behavioural difficulties and poorer adolescent mental health. CONCLUSIONS: The implication of these findings was discussed in relation to needs for information and support among Australian families with an adolescent with T1D, acknowledging the important dimension of family functioning and relationships in adolescent chronic disease management.

Diathermy and bone sawing are high aerosol yield procedures.

Aims: Orthopaedic surgery uses many varied instruments with high-speed, high-impact, thermal energy and sometimes heavy instruments, all of which potentially result in aerosolization of contaminated blood, tissue, and bone, raising concerns for clinicians' health. This study quantifies the aerosol exposure by measuring the number and size distribution of the particles reaching the lead surgeon during key orthopaedic operations. Methods: The aerosol yield from 17 orthopaedic open surgeries (on the knee, hip, and shoulder) was recorded at the position of the lead surgeon using an Aerodynamic Particle Sizer (APS; 0.5 to 20 µm diameter particles) sampling at 1 s time resolution. Through timestamping, detected aerosol was attributed to specific procedures. Results: Diathermy (electrocautery) and oscillating bone saw use had a high aerosol yield (> 100 particles detected per s) consistent with high exposure to aerosol in the respirable range (< 5 µm) for the lead surgeon. Pulsed lavage, reaming, osteotome use, and jig application/removal were medium aerosol yield (10 to 100 particles s-1). However, pulsed lavage aerosol was largely attributed to the saline jet, osteotome use was always brief, and jig application/removal had a large variability in the associated aerosol yield. Suctioning (with/without saline irrigation) had a low aerosol yield (< 10 particles s-1). Most surprisingly, other high-speed procedures, such as drilling and screwing, had low aerosol yields. Conclusion: This work suggests that additional precautions should be recommended for diathermy and bone sawing, such as enhanced personal protective equipment or the use of suction devices to reduce exposure.

Crystal structures, Hirshfeld analysis, and energy framework analysis of two differently 3'-substituted 4-methylchalcones: 3'-(N=CHC6H4-p-CH3)-4-methylchalcone and 3'-(NHCOCH3)-4-methylchalcone.

Two crystal structures of chalcones, or 1,3-diarylprop-2-en-1-ones, are presented; both contain a p-methyl substitution on the 3-Ring, but differ with respect to the m-substitution on the 1-Ring. Their systematic names are (2E)-3-(4-methylphenyl)-1-(3-{[(4-methylphenyl)methylidene]amino}phenyl)prop-2-en-1-one (C24H21NO) and N-{3-[(2E)-3-(4-methylphenyl)prop-2-enoyl]phenyl}acetamide (C18H17NO2), which are abbreviated as 3'-(N=CHC6H4-p-CH3)-4-methylchalcone and 3'-(NHCOCH3)-4-methylchalcone, respectively. Both chalcones represent the first reported acetamide-substituted and imino-substituted chalcone crystal structures, adding to the robust library of chalcone structures within the Cambridge Structural Database. The crystal structure of 3'-(N=CHC6H4-p-CH3)-4-methylchalcone exhibits close contacts between the enone O atom and the substituent arene ring, in addition to C...C interactions between the substituent arene rings. The structure of 3'-(NHCOCH3)-4-methylchalcone exhibits a unique interaction between the enone O atom and the 1-Ring substituent, contributing to its antiparallel crystal packing. In addition, both structures exhibit π-stacking, which occurs between the 1-Ring and R-Ring for 3'-(N=CHC6H4-p-CH3)-4-methylchalcone, and between the 1-Ring and 3-Ring for 3'-(NHCOCH3)-4-methylchalcone.

Assessing the Sampleability of Bennu's Surface for the OSIRIS-REx Asteroid Sample Return Mission.

NASA's first asteroid sample return mission, OSIRIS-REx, collected a sample from the surface of near-Earth asteroid Bennu in October 2020 and will deliver it to Earth in September 2023. Selecting a sample collection site on Bennu's surface was challenging due to the surprising lack of large ponded deposits of regolith particles exclusively fine enough ( ≤ 2 cm diameter) to be ingested by the spacecraft's Touch-and-Go Sample Acquisition Mechanism (TAGSAM). Here we describe the Sampleability Map of Bennu, which was constructed to aid in the selection of candidate sampling sites and to estimate the probability of collecting sufficient sample. "Sampleability" is a numeric score that expresses the compatibility of a given area's surface properties with the sampling mechanism. The algorithm that determines sampleability is a best fit functional form to an extensive suite of laboratory testing outcomes tracking the TAGSAM performance as a function of four observable properties of the target asteroid. The algorithm and testing were designed to measure and subsequently predict TAGSAM collection amounts as a function of the minimum particle size, maximum particle size, particle size frequency distribution, and the tilt of the TAGSAM head off the surface. The sampleability algorithm operated at two general scales, consistent with the resolution and coverage of data collected during the mission. The first scale was global and evaluated nearly the full surface. Due to Bennu's unexpected boulder coverage and lack of ponded regolith deposits, the global sampleability efforts relied heavily on additional strategies to find and characterize regions of interest based on quantifying and avoiding areas heavily covered by material too large to be collected. The second scale was site-specific and used higher-resolution data to predict collected mass at a given contact location. The rigorous sampleability assessments gave the mission confidence to select the best possible sample collection site and directly enabled successful collection of hundreds of grams of material.

Structural effects of halogen bonding in iodochalcones.

The structures of three iodochalcones, functionalized with fluorine or a nitro group, have been investigated to explore the impact of different molecular electrostatic distributions on the halogen bonding within each crystal structure. The strongly withdrawing nitro group presented a switch of the halogen bond from a lateral to a linear motif. Surprisingly, this appears to be influenced by a net positive shift in charge distribution around the lateral edges of the σ-hole, making the lateral I...I bonding motif less preferable. A channel of amphoteric I...I type II halogen bonds is observed for a chalcone molecule, which was not previously reported in chalcones, alongside an example of the common synthon involving extended linear chains of I...O2N donor-acceptor halogen bonds. This work shows that halogenated chalcones may be an interesting target for developing halogen bonding as a significant tool within crystal engineering, a thus far underexplored area for this common structural motif.

Structure determination, thermal stability and dissolution rate of δ-indomethacin.

The structure solution of the δ-polymorph of indomethacin was obtained using three-dimensional electron diffraction. This form shows a significantly enhanced dissolution rate compared with the more common and better studied α- and γ-polymorphs, indicating better biopharmaceutical properties for medicinal applications. The structure was solved in non-centrosymmetric space group P21 and comprises two molecules in the asymmetric unit. Packing and molecule conformation closely resemble indomethacin methyl ester and indomethacin methanol solvate. Knowledge of the structure allowed the rational interpretation of spectroscopic IR and Raman data for δ-polymorph and a tentative interpretation for still unsolved indomethacin polymorphs. Finally, we observed a solid-solid transition from δ-polymorph to α-polymorph that can be driven by similarities in molecular conformation.

Metastable crystalline phase formation in deep eutectic systems revealed by simultaneous synchrotron XRD and DSC.

The phase behaviour of various deep eutectic systems was analysed using concurrent synchrotron powder X-ray diffraction and differential scanning calorimetry. Deep eutectic systems containing the pharmaceuticals metacetamol, 2-ethoxybenzamide or benzamide as binary mixtures with phenol revealed new crystalline phases melting either before or with crystals of phenol, highlighting their lower stabilities. Furthermore, in the phenol : 2-ethoxybenzamide system it was shown that multiple metastable phases can form, highlighting the potential for the separation of a hierarchy of crystal structures with differing stabilities from eutectic systems. Through these experiments, we strengthen the idea that eutectic systems can be described by understanding the formation and stabilities of metastable co-crystalline structures. These novel results lead to a deeper understanding of the structure and thermodynamics of deep eutectic solvents, with relevance for analagous systems across materials science.

Visualising early-stage liquid phase organic crystal growth via liquid cell electron microscopy.

Here, we show that the development of nuclei and subsequent growth of a molecular organic crystal system can be induced by electron beam irradiation by exploiting the radiation chemistry of the carrier solvent. The technique of Liquid Cell Electron Microscopy was used to probe the crystal growth of flufenamic acid; a current commercialised active pharmaceutical ingredient. This work demonstrates liquid phase electron microscopy analysis as an essential tool for assessing pharmaceutical crystal growth in their native environment while giving insight into polymorph identification of nano-crystals at their very inception. Possible mechanisms of crystal nucleation due to the electron beam with a focus on radiolysis are discussed along with the innovations this technique offers to the study of pharmaceutical crystals and other low contrast materials.

Crystal structures of three functionalized chalcones: 4'-di-methyl-amino-3-nitro-chalcone, 3-di-methyl-amino-3'-nitrochalcone and 3'-nitro-chalcone.

The structure of three functionalized chalcones (1,3-di-aryl-prop-2-en-1-ones), containing combinations of nitro and di-methyl-amino functional groups, are presented, namely, 1-[4-(di-methyl-amino)-phen-yl]-3-(3-nitro-phen-yl)prop-2-en-1-one, C17H16N2O3, Gp8m, 3-[3-(di-methyl-amino)-phen-yl]-1-(3-nitro-phen-yl)prop-2-en-1-one, C17H16N2O3, Hm7m and 1-(3-nitro-phen-yl)-3-phenyl-prop-2-en-1-one, C15H11NO3, Hm1-. Each of the mol-ecules contains bonding motifs seen in previously solved crystal structures of functionalized chalcones, adding to the large dataset available for these small organic mol-ecules. The structures of all three of the title compounds contain similar bonding motifs, resulting in two-dimensional planes of mol-ecules formed via C-H⋯O hydrogen-bonding inter-actions involving the nitro- and ketone groups. The structure of Hm1- is very similar to the crystal structure of a previously solved isomer [Jing (2009 ▸). Acta Cryst. E65, o2510].

Crystal structure and Hirshfeld analysis of 3'-bromo-4-methyl-chalcone and 3'-cyano-4-methyl-chalcone.

Two crystal structures of chalcones, or 1,3-di-aryl-prop-2-en-1-ones, are presented; both contain a methyl substitution on the 3-Ring, but differ on the 1-Ring, bromo versus cyano. The compounds are 3'-bromo-4-methyl-chalcone [systematic name: 1-(2-bromo-phen-yl)-3-(4-methyl-phen-yl)prop-2-en-1-one], C16H13BrO, and 3'-cyano-4-methyl-chalcone {systematic name: 2-[3-(4-methyl-phen-yl)prop-2-eno-yl]benzo-nitrile}, C17H13NO. Both chalcones meaningfully add to the large dataset of chalcone structures. The crystal structure of 3'-cyano-4-methyl-chalcone exhibits close contacts with the cyano nitro-gen that do not appear in previously reported disubstituted cyano-chalcones, namely inter-actions between the cyano nitro-gen atom and a ring hydrogen atom as well as a methyl hydrogen atom. The structure of 3'-bromo-4-methyl-chalcone exhibits a type I halogen bond, similar to that found in a previously reported structure for 4-bromo-3'-methyl-chalcone.

Widespread carbon-bearing materials on near-Earth asteroid (101955) Bennu.

Asteroid (101955) Bennu is a dark asteroid on an Earth-crossing orbit that is thought to have assembled from the fragments of an ancient collision. We use spatially resolved visible and near-infrared spectra of Bennu to investigate its surface properties and composition. In addition to a hydrated phyllosilicate band, we detect a ubiquitous 3.4-micrometer absorption feature, which we attribute to a mix of organic and carbonate materials. The shape and depth of this absorption feature vary across Bennu's surface, spanning the range seen among similar main-belt asteroids. The distribution of the absorption feature does not correlate with temperature, reflectance, spectral slope, or hydrated minerals, although some of those characteristics correlate with each other. The deepest 3.4-micrometer absorptions occur on individual boulders. The variations may be due to differences in abundance, recent exposure, or space weathering.

Psychological aspects of the alien contact experience.

Previous research has shown that people reporting contact with aliens, known as "experiencers", appear to have a different psychological profile compared to control participants. They show higher levels of dissociativity, absorption, paranormal belief and experience, and possibly fantasy proneness. They also appear to show greater susceptibility to false memories as assessed using the Deese/Roediger-McDermott technique. The present study reports an attempt to replicate these previous findings as well as assessing tendency to hallucinate and self-reported incidence of sleep paralysis in a sample of 19 UK-based experiencers and a control sample matched on age and gender. Experiencers were found to show higher levels of dissociativity, absorption, paranormal belief, paranormal experience, self-reported psychic ability, fantasy proneness, tendency to hallucinate, and self-reported incidence of sleep paralysis. No significant differences were found between the groups in terms of susceptibility to false memories. Implications of the results are discussed and suggestions are made for future avenues of research.

Regulation of the human LAT gene by the Elf-1 transcription factor.

BACKGROUND: The LAT gene encodes an intracellular adaptor protein that links cell-surface receptor engagement to numerous downstream signalling events, and thereby plays an integral role in the function of cell types that express the gene, including T cells, mast cells, natural killer cells, and platelets. To date, the mechanisms responsible for the transcriptional regulation of this gene have not been investigated. RESULTS: In this study we have mapped the transcriptional start sites for the human LAT gene and localized the 5' and 3' boundaries of the proximal promoter. We find that the promoter contains both positive and negative regulatory regions, and that two binding sites for the Ets family of transcription factors have a strong, positive effect on gene expression. Each site binds the Ets family member Elf-1, and overexpression of Elf-1 augments LAT promoter activity. The promoter also contains a Runx binding site adjacent to one of the Ets sites. This site, which is shown to bind Runx-1, has an inhibitory effect on gene expression. Finally, data is also presented indicating that the identified promoter may regulate cell-type specific expression. CONCLUSION: Collectively, these results provide the first insights into the transcriptional regulation of the LAT gene, including the discovery that the Ets transcription factor Elf-1 may play a central role in its expression.

The complex relationship between olivine abundance and thermal inertia on Mars.

We examine four olivine-bearing regions at a variety of spatial scales with thermal infrared, visible to near-infrared, and visible imagery data to investigate the hypothesis that the relationship between olivine abundance and thermal inertia (i.e., effective particle size) can be used to infer the occurrence of olivine chemical alteration during sediment production on Mars. As in previous work, Nili Fossae and Isidis Planitia show a positive correlation between thermal inertia and olivine abundance in Thermal Emission Spectrometer (TES) and Thermal Emission Imaging System (THEMIS) data, which could be interpreted as indicating olivine chemical weathering. However, geomorphological analysis reveals that relatively olivine-poor sediments are not derived from adjacent olivine-rich materials, and therefore, chemical weathering cannot be inferred based on the olivine-thermal inertia relationship alone. We identify two areas (Terra Cimmeria and Argyre Planitia) with significant olivine abundance and thermal inertias consistent with sand, but no adjacent rocky (parent) units having even greater olivine abundances. More broadly, global analysis with TES reveals that the most typical olivine abundance on Mars is ~5-7% and that olivine-bearing (5-25%) materials have a wide range of thermal inertias, commonly 25-600 J m-2 K-1 s-1/2. TES also indicates that the majority of olivine-rich (>25%) materials have apparent thermal inertias less than 400 J m-2 K-1 s-1/2. In summary, we find that the relationship between thermal inertia and olivine abundance alone cannot be used in infer olivine weathering in the examined areas, that olivine-bearing materials have a large range of thermal intertias, and therefore that a complex relationship between olivine abundance and thermal inertia exists on Mars.

Morphology and composition of the surface of Mars: Mars Odyssey THEMIS results.

The Thermal Emission Imaging System (THEMIS) on Mars Odyssey has produced infrared to visible wavelength images of the martian surface that show lithologically distinct layers with variable thickness, implying temporal changes in the processes or environments during or after their formation. Kilometer-scale exposures of bedrock are observed; elsewhere airfall dust completely mantles the surface over thousands of square kilometers. Mars has compositional variations at 100-meter scales, for example, an exposure of olivine-rich basalt in the walls of Ganges Chasma. Thermally distinct ejecta facies occur around some craters with variations associated with crater age. Polar observations have identified temporal patches of water frost in the north polar cap. No thermal signatures associated with endogenic heat sources have been identified.