Anxiolytic-like Effect of Quercetin Possibly through GABA Receptor Interaction Pathway: In Vivo and In Silico Studies.

Scientific evidence suggests that quercetin (QUR) has anxiolytic-like effects in experimental animals. However, the mechanism of action responsible for its anxiolytic-like effects is yet to be discovered. The goal of this research is to assess QUR's anxiolytic effects in mouse models to explicate the possible mechanism of action. After acute intraperitoneal (i.p.) treatment with QUR at a dose of 50 mg/kg (i.p.), behavioral models of open-field, hole board, swing box, and light-dark tests were performed. QUR was combined with a GABAergic agonist (diazepam) and/or antagonist (flumazenil) group. Furthermore, in silico analysis was also conducted to observe the interaction of QUR and GABA (α5), GABA (ß1), and GABA (ß2) receptors. In the experimental animal model, QUR had an anxiolytic-like effect. QUR, when combined with diazepam (2 mg/kg, i.p.), drastically potentiated an anxiolytic effect of diazepam. QUR is a more highly competitive ligand for the benzodiazepine recognition site that can displace flumazenil (2.5 mg/kg, i.p.). In all the test models, QUR acted similar to diazepam, with enhanced effects of the standard anxiolytic drug, which were reversed by pre-treatment with flumazenil. QUR showed the best interaction with the GABA (α5) receptor compared to the GABA (ß1) and GABA (ß2) receptors. In conclusion, QUR may exert an anxiolytic-like effect on mice, probably through the GABA-receptor-interacting pathway.

Cytotoxic, α-amylase inhibitory and thrombolytic activities of organic and aqueous extracts of Bacillus clausii KP10.

Humans are experiencing serious health issues like myocardial infarction and diabetes. Thrombosis is the reason of myocardial infarction that may cause death. Bioactive compounds or enzymes can be used to dissolve the clot. Whereas diabetes is a disorder of metabolism in which the level of glucose in blood becomes high. It can be controlled by inhibiting α-amylase enzyme. The current project was, therefore planned to investigate the thrombolytic, α-amylase inhibitory and cytotoxic (to access drug safety) potentials of the organic and aqueous bioactive fractions of Bacillus clausii KP10. The cytotoxicity was assessed with hemolytic assay, α-amylase inhibition assay was done by using DNS and in-vitro thrombolytic effect was checked with human blood. In our experiments, the maximum hemolytic activity was shown by ethyl acetate fraction (12.64%). Results were compared with standard Triton X-100 which showed 91.61% hemolytic activity whereas all other fractions showed least cytotoxic activity. The extracts were also evaluated as thrombolytic agents as correlated to streptokinase (73.83%). All the extracts showed clot lysis activity, among which water soluble fraction exhibited maximum (35.16%) clot lysis activity. In our experiment methanol soluble fraction of B. clausii KP10 showed maximum 26.49% α-amylase inhibitory activity. Results were analyzed statistically through analysis of variance (ANOVA).

Variation in Phenolic Profile, ß-Carotene and Flavonoid Contents, Biological Activities of Two Tagetes Species from Pakistani Flora.

The objective of present study was to evaluate the variation in phenolic profile, ß-carotene, flavonoid contents, antioxidant and antimicrobial properties of Tagetes erecta and Tagetes patula (T. erecta and T. patula) through different in vitro assays. Antioxidant activity was determined through 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging and inhibition of linoleic acid peroxidation assays and antibacterial and antifungal activities studied using the disc diffusion and resazurin microtiter-plate assays against bacterial and fungal strains. Moreover, total phenolics (TP), total carotenoids (TC) and total flavonoids (TF) were also determined. Highest (TP 35.8 mg GAE/g) and TF (16.9 mg CE/g) contents were found in MeOH extract of T. patula. T. erecta extract showed higher TC contents (6.45 mg/g) than T. patula extract (6.32 mg/g). T. erecta exhibited the highest DPPH radical-scavenging activity (IC50 ) (5.73 µg/mL) and inhibition of linoleic acid peroxidation (80.1%). RP-HPLC revealed the presence of caffeic acid, sinapic acid and ferulic acid in Tagetes extracts, m-coumaric acid in T. erecta whereas chlorogenic acid in T. patula extract only. Both extracts possessed promising antimicrobial activity compared to the ciprofloxacin and flumequine (+ve controls) against Bacillus subtilis and Alternaria alternate. Both extract were rich source of polyphenols exhibiting excellent biological activities.

A Comparative Study on Hemp (Cannabis sativa) Essential Oil Extraction Using Traditional and Advanced Techniques.

A comparative study of Cannabis sativa (Hemp) essential constituents obtained by using Supercritical Fluid Extraction (SCFE), Steam Distillation (SD) and Hydrodistillation (HD) is presented here. The optimized extraction temperatures were 130，110 and 50 ℃ for hydrodistillation, steam distillation and supercritical fluid extraction respectively. The essential oil of C. sativa was analyzed by using Gas chromatography mass spectrometry (GC-MS). A total of 33, 30 and 31 components have been identified in HD, SD and SCFE respectively. Yield of essential oil using SCFE (0.039%) was more than HD (0.025%) and SD (0.035%) extraction respectively. The main component of sesquiterpenes obtained by hydrodistillation at 130 ℃ with their percentages included caryophyllene (40.58%), trans-α-bergamotene (5.41%), humulene (10.97%), cis-ß-farnesene (8.53%) and monoterpenes included α-pinene (2.13%), d-limonene (6.46%), p-cymol (0.65%) and cineole (2.58%) respectively. The main component of sesquiterpenes obtained by SD steam distillation at 110 ℃ including caryophyllene (38.60%) trans-α-bergamotene (4.22%), humulene (10.26%), cis-ß-farnesene (6.67%) and monoterpenes included α-pinene (3.21%), d-limonene (7.07%), p-cymol (2.59%) and cineole (3.88%) whereas the more percentages of major components were obtained by SCFE at 50 ℃ included caryophyllene (44.31%), trans-α-bergamotene (6.79%), humulene (11.97%) cis-ß-farnesene (9.71%) and monoterpenes included α-pinene (0.45%), d-limonene (2.13%) p-cymol (0.19%) and cineole (1.38 %) respectively. We found yield/efficiency, chemical composition, quality of the essential oils by supercritical fluid extraction superior in terms of modern, green, saving energy and a rapid approach as compared to traditional techniques.

Efficient nanostructured materials to reduce nutrient leaching to overcome environmental contaminants.

Nutrient leaching is a major reason for fresh and ground water contamination. Menthol is the major bioactive ingredient of Mentha arvensis L. and one of the most traded products of global essential oil market. The indigenous production of menthol crystals in developing countries of the world can prove to be the backbone for local growers and poor farmers. Therefore, present research was designed to check the effects of nano-structured plant growth regulators (PGRs) (28-homobrassinolide and ethephon) with reduced leaching potentials on the essential oil and menthol (%) of Mentha arvensis L. The prepared nano-formulations were characterized by Fourier transform infrared (FTIR) spectroscopy, Laser induced breakdown spectroscopy (LIBS), Differential scanning colorimetry-thermal gravimetric analysis (DSC-TGA), Scanning electron microscopy (SEM), Atomic absorption spectrometry (AAS) and Zeta potential and Zeta size analysis. The menthol (%) was determined by modified spectrophotometric and gas chromatographic (GC) method. The highest essential oil (%) was obtained by the application of 28-homobrassinolide-Zn-NPs-L-II (0.92 ± 0.09%) and ethephon-Ca-NPs-L-III (0.91 ± 0.05%) as compared to the control (0.65 ± 0.03%) and blank (0.62 ± 0.09%). The highest menthol (%) was obtained by applying 28-homobrassinolide-Ca-NPs-L-I (80.06 ± 0.07%), 28-homobrassinolide-Ca-NPs-L-II (80.48 ± 0.09%) and 28-homobrassinolide-Ca-NPs-L-III (80.84 ± 0.11%) and ethephon-Ca-NPs-L-III (81.53 ± 0.17%) and ethephon-Zn-NPs-L-II (81.93 ± 0.26%) as compared to control (67.19 ± 0.14%) and blank (63.93 ± 0.17%).

g-C3N4/graphene oxide/SnFe2O4 ternary composite for the effective sunlight-driven photocatalytic degradation of methylene blue.

A broadly used dye, methylene blue (MB), adversely impacts human health and water resources, which triggers efficient methods for its elimination. Semiconductor-based heterogeneous photocatalysis is an environmentally friendly approach that effectively degrades organic pollutants. The purpose of the current work is to elucidate and validate the application of a promising g-C3N4/GO/SnFe2O4 (CGS) composite for the environmental remediation of methylene blue dye. The ternary CGS composite has been synthesized using a solvothermal approach. The fabricated composites were analyzed through FTIR, XRD, SEM/EDX, UV-VIS spectroscopy, TEM, and XPS. The photoactivity of composites and affecting parameters (pH, H2O2 dosage, composite amount, initial dye concentration, and irradiation time) were observed in sunlight illumination. The optimal conditions for photocatalytic degradation were pH = 5, photocatalyst dosage = 30 mg/100 mL, H2O2 dosage = 6 mM, and initial dye concentration (IDC) of 10 ppm employing ternary CGS composite, and MB dye was degraded effectively within 1 h. Ninety-eight percent degradation efficacy was attained by employing ternary CGS composite under the optimized conditions. Scavenging analysis suggested that •OH radicals were the key reactive oxygen species (ROS) responsible for the photodegradation of MB dye. Furthermore, the CGS nanocomposite exhibited outstanding recyclability of 84% after five consecutive runs, demonstrating its potential for use in practical applications, particularly pollutant removal.

A novel study for producing complexed and encapsulated nutrients at nanometric scale to enhance plant growth.

Complexation of micronutrients with complexing agents reduce undesirable reactions of fertilizers in soil water system. In the form of complex structure nutrients remain available to plants in the useable form. Nanoform fertilizer enhances the surface area of particles and less amount of fertilizer contact with large area of plant roots which reduce fertilizer cost. Controlling release of fertilizer using polymeric material like sodium alginate makes agriculture practices more efficient and cost effective. Several fertilizers and nutrients are used at a large scale to improve crop yields globally and almost more than half goes to waste. Therefore, there is a dire need to improve plant-available nutrients in soil, using feasible, environmentally friendly technologies. In the present research, complexed micronutrients were successfully encapsulated using a novel technique at nanometric scale. The nutrients were complexed with proline and encapsulated using sodium alginate (polymer). Sweet basil was subjected to seven treatments over three months in a moderately controlled environment (25 °C of temperature and 57% of humidity) to study the effects of synthesized complexed micronutrient nano fertilizers. The structural modifications of the complexed micronutrient nanoforms of fertilizers were examined, through X-ray powder diffraction (XRD) and scanning electron microscopy (SEM). The size of manufactured fertilizers was between 1 and 200 nm. Fourier transform infrared (FTIR) spectroscopy stretching vibration peaks at 1600.9 cm-1 (C=O), 3336 cm-1 (N-H) and at 1090.2 cm-1 (N-H in a twisting and rocking) corresponds to the pyrrolidine ring. Gas chromatography-mass spectrometry was used to analyze the chemical makeup of the essential oil of the basil plants. Essential oil yield of basil plants increased from 0.0035 to 0.1226% after treatments. The findings of the present research show that complexation and encapsulation improve crop quality, essential oil yield, and antioxidant potential of basil.

Low-cost novel nano-constructed granite composites for removal of hazardous Terasil dye from wastewater.

The hazardous dyes on mixing with water resources are affecting many life forms. Granite stone is popular worldwide for decorating floors, making other forms of decorative materials and items. Granite stone powder waste can be obtained free of cost from marble factories as factories spend on the disposal of this waste. In the present study, novel granite stone powder waste composite has been prepared and utilized for the effective removal of Terasil dye. Two types of granite including gray granite and white granite were used in pure, calcinized, and chemically modified forms. Freundlich adsorption isotherm model best explained the adsorption mechanism of dye removal using granite composites as compared to other adsorption isothermal models. Characterization techniques like scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy were used for the determination of morphological features and functional groups of granite composites. The obtained results were statistically analyzed using analysis of variance (ANOVA) along with the post hoc Tukey test. An extraordinarily high Terasil dye uptake capacity (more than 400 mg/g) was exhibited by granite composites prepared using sodium metasilicate. The synthesized novel nano-constructed composites provided a viable strategy as compared to the pure granite stone for dye removal from wastewater water.

Chemical composition and antimicrobial activity of Boswellia serrata oleo-gum-resin essential oil extracted by superheated steam.

Oleo-gum-resin is a complex mixture of essential oils, polysaccharides, and resin acids. The objectives of the present study were to evaluate the variation in chemical components and antimicrobial activity of essential oils extracted by superheated steam at various temperatures. The optimum essential oil yield was obtained at the highest superheated steam temperature (210 °C). In total, twenty-one compounds were quantified by GC-MS with α-pinene as the major compound, followed by α-thujene, trans-verbenol, ß-thujone, p-cymene, m-cymene, and sabinene. Antimicrobial activity was performed by disc diffusion, resazurin microtitre-plate and micro-dilution broth susceptibility assays in which essential oil extracted at 150 °C and 180 °C revealed the highest antibacterial and antifungal activity, respectively. It is concluded that superheated steam is an effective method for the isolation of essential oil from oleo-gum-resin that improves the recovery of essential oil as well as antimicrobial activity.

Chemical composition, antioxidant, and antimicrobial activities of P. roxburghii oleoresin essential oils extracted by steam distillation, superheated steam, and supercritical fluid CO2 extraction.

Pinus roxburghii is a rich source of high-quality oleoresin that is composed of resin acids and essential oil (EO). The present research work was planned to study and compare the yield, biological activities, and chemical profiling of P. roxburghii oleoresin EOs extracted through various green extraction methods. Steam distillation (SD), supercritical fluid extraction, and superheated SD (SHSD) at different temperatures (120, 140, and 160°C) were employed to extract EOs from P. roxburghii oleoresin. Antioxidant potential of EOs was determined by total antioxidant content/ferric-reducing antioxidant power (FRAP), 2,2-diphenyl-1-picrylhydrazyl (DPPH)-free radical scavenging activity (DPPH-FRSA), hydrogen peroxide scavenging assays, and percentage inhibition in linoleic acid. Antimicrobial activity of EOs was determined by resazurin microtiter-plate, disc diffusion, and micro-dilution broth susceptibility assays. Gas chromatography-mass spectrometry was used to determine the chemical composition of EOs. It was observed that extraction methods significantly affected the yield, biological activities, and chemical composition of EOs. The maximum yield (19.92%) was found in EO extracted by SHSD at 160°C. EO extracted by SHSD at 120°C showed the highest DPPH-FRSA (63.33% ± 0.47%), linoleic acid oxidation inhibition (96.55% ± 1.71%), hydrogen peroxide scavenging activity (59.42% ± 0.32%), and total antioxidant contents/FRAP (134.49% ± 1.34 mg/L of gallic acid equivalent). The antimicrobial activity results showed that superheated steam-extracted EO of 120°C revealed the highest antifungal and antibacterial activity. It is concluded that SHSD is an alternative and effective technique for the extraction of oleoresins EO that improves the EO yield and biological activities. Further research on optimization and experimental parameters for the extraction of P. roxburghii oleoresin EO by SHSD is required.

The production of biodiesel from plum waste oil using nano-structured catalyst loaded into supports.

The present study was undertaken with aims to produced catalyst loaded on low-cost clay supports and to utilize plum waste seed oil for the production of biodiesel. For this purpose, Bentonite-potassium ferricyanide, White pocha-potassium ferricyanide, Granite-potassium ferricyanide, Sindh clay-potassium ferricyanide, and Kolten-potassium ferricyanide composites were prepared. Transesterification of plum oil under the different conditions of reactions like catalysts concentrations (0.15, 0.3 and 0.6 g), temperature (50, 60, 70 and 80 °C), reaction time (2, 4 and 6 h) and oil to methanol ratio (1:10) was conducted. The maximum biodiesel yield was recorded for Bentonite-potassium ferricyanide composite. This composite was subjected to calcination process to produce Calcinized bentonite-potassium ferricyanide composite and a further improvement in biodiesel amount was recorded. The fuel quality parameters of all biodiesel samples were in standard range. Gas chromatographic mass spectrometric analysis confirmed the presence of oleic and linoleic acids in the plum seed oil. The characterization of composite was done using FTIR, SEM and EDX. Two infrared bands are observed in the spectrum from 1650 to 1630 cm-1 indicates that the composite materials contained highly hydrogen bonded water. The presence of surface hydroxyls groups can also be confirmed from FTIR data. SEM image clearly show the presence of nano-rods on the surface of Granite-potassium ferricyanide and Kolten-potassium ferricyanide composites. Another interesting observation that can be recorded from SEM images is the changes in surface characteristic of Bentonite-potassium ferricyanide composite after calcination (at 750 °C, 1 atm for 4 h). Calcinized bentonite-potassium ferricyanide composite found to contain more nano rod like structures at its surface as compared to Bentonite-potassium ferricyanide composite which contained spherical particles. EDX data of Bentonite-potassium ferricyanide composite and Calcinized bentonite-potassium ferricyanide composite show that after calcination carbon and oxygen was reduced. The other lost volatile compounds after calcination were of Na, Mg, Al, Si, and S. The XRD spectrum of pure bentonite showed the average crystal size of 24.46 nm and calcinized bentonite of 25.59 nm. The average crystal size of bentonite and potassium ferricyanide composite and its calcinized form was around 33.76 nm and 41.05 nm, respectively.

Seasonal Variation, Fractional Isolation and Nanoencapsulation of Antioxidant Compounds of Indian Blackberry (Syzygium cumini).

Indian blackberry (Syzygium cumini L.) is an evergreen tree in the Myrtaceae family. It is used in traditional medicine due to its significant bioactivities and presence of polyphenols with antioxidant activities. The present study describes the effect of seasonal variations on Indian blackberry leaf essential oil yield and chemical composition, production of fractions from essential oil using high vacuum fractional distillation and slow cooling to low temperature (-50 °C) under vacuum, and bioactivities of the essential oil, fractions, and nanoparticles. The results show that Indian blackberry essential oil yield was higher in spring season as compared to winter season. Indian blackberry essential oil fractionation processes were effective in separating and concentrating compounds with desired bioactivities. The bioactivities shown by magnesium nanoparticles were comparatively higher than barium nanoparticles.

Surface Enhanced Raman Spectroscopy of the serum samples for the diagnosis of Hepatitis C and prediction of the viral loads.

In this study, Surface Enhanced Raman Spectroscopy (SERS) was used for the characterization of Hepatitis C virus (HCV) in blood serum samples. For this purpose silver nanoparticles (Ag NPs) were used as substrates and SERS spectra were acquired from different clinically diagnosed HCV positive serum samples as well as from healthy individuals. Notably, same set of samples were also evaluated with Raman spectroscopy and SERS was found to be more helpful for the identification of the spectral features associated with the development of HCV infection. Different SERS features associated with the RNA bases were observed solely in the HCV positive serum as compared to the healthy samples which can be considered as SERS spectral markers of the HCV infection. Furthermore, principal component analysis (PCA) of the SERS spectral data was found to be very helpful in differentiation of spectral data of serum samples with different viral loads PLSR model was constructed to compare the capability of SERS and Raman analysis in the prediction of viral loads. It is found that SERS shows lower root mean square error of cross validation (RMSECV) and higher goodness of the model (R2) values than Raman data.

Novel mutant camelina and jatropha as valuable feedstocks for biodiesel production.

Novel mutant camelina has become a crop of interest inspired by its short growing season, low harvesting costs and high oil composition. Despite those advantages, limited research has been done on novel mutant lines to determine applicability for biodiesel production. Jatropha is an extremely hardy, frugal and high oil yielding plant species. The major aim of the present study was not only to compare biodiesel production from jatropha and camelina but was also to test the efficacy of camelina mutant lines (M6 progenies) as superior feedstock. The biodiesel yield from camelina oil and jatropha oil was 96% and 92%, respectively. The gas chromatographic analysis using flame ionization detector (GC-FID) showed that mutant camelina oil biodiesel sample contain major amount of oleic acid (46.54 wt%) followed by linolenic acid (20.41 wt%) and linoleic acid (16.55 wt%). Jatropha biodiesel found to contain major amount of oleic acid (45.03 wt%) followed by linoleic acid (25.07 wt%) and palmitic acid (19.31 wt%). The fuel properties of produced biodiesel were found in good agreement with EN14214 and ASTM D6751 standards. The mutant camelina lines biodiesel have shown comparatively better fuel properties than jatropha. It has shown low saponification value (120.87-149.35), high iodine value (130.2-157.9) and better cetane number (48.53-59.35) compared to jatropha biodiesel which have high saponification value (177.39-198.9), low iodine value (109.7-123.1) and lesser cetane number (47.76-51.26). The results of the present student of utilizing novel mutant camelina lines for biodiesel production are quite promising and are helpful in turning out the outcomes of the previous studies suggesting that C. sativa biodiesel presents serious drawbacks for biodiesel applications.

Use of Morus alba-Bombyx mori as a useful template to assess Pb entrance in the food chain from wastewater.

This study focused on a 75-d microplot experiment to access lead (Pb) entrance into the terrestrial ecosystem using Morus alba (mulberry) and Bombyx mori (silkworm) as pollution indicator sources. The Pb(II) mobility in different systems was in the following order: synthetic effluents > soil > plant > larva > larva-fecal. The Pb(II) mobility from an inorganic source to different life forms was found to be highly dependent on soil pH and the concentration of Pb in synthetic effluents. At lower concentrations, Pb was less lethal to B. mori larvae. Fifth instars of B. mori were found to be more tolerant to toxicity caused by Pb compared with lower instars. M. alba was not a hyperaccumulator plant because Pb(II) concentration was <1,000 mg/kg at all soil pHs and Pb(II) concentrations in effluents. The maximum amount of Pb(II) detected in soil, mulberry leaves, silkworm larvae, and silkworm feces was 326.5 +/- 0.04, 42.78 +/- 0.02, 61.24 +/- 0.02, and 22.3 +/- 0.02 mg/kg, respectively.

Pb(II) biosorption from hazardous aqueous streams using Gossypium hirsutum (Cotton) waste biomass.

Studies on the biosorptive ability of Gossypium hirsutum (Cotton) waste biomass outlined that smaller size of biosorbent (0.355mm), higher biomass dose (0.20g), 5 pH and 100mg/L initial Pb(II) concentration were more suitable for enhanced Pb(II) biosorption from aqueous medium. The Langmuir isotherm model and pseudo second order kinetic model fitted well to the data of Pb(II) biosorption. Highly negative magnitude of Gibbs free energy (DeltaG degrees ) indicated that the process was spontaneous in nature. In addition to this surface coverage and distribution coefficient values of Pb(II) biosorption process were also determined. At optimized conditions Pb(II) uptake was more rapid in case of industrial effluents in comparison to synthetic solutions. FTIR spectroscopic analysis revealed that the main functional groups involved in the uptake of Pb(II) on the surface of G. hirsutum biomass were carboxyl, carbonyl, amino and alcoholic.

Kinetic and thermodynamic aspects of Cu(II) and Cr(III) removal from aqueous solutions using rose waste biomass.

Distillation waste of rose petals was used to remove Cu(II) and Cr(III) from aqueous solutions. The results demonstrated the dependency of metal sorption on pH, sorbent dose, sorbent size, initial bulk concentration, time and temperature. A dosage of 1g/L of rose waste biomass was found to be effective for maximum uptake of Cu(II) and Cr(III). Optimum sorption temperature and pH for Cu(II) and Cr(III) were 303+/-1K and 5, respectively. The Freundlich regression model and pseudo-second-order kinetic model were resulted in high correlation coefficients and described well the sorption of Cu(II) and Cr(III) on rose waste biomass. At equilibrium q(max) (mg/g) of Cu(II) and Cr(III) was 55.79 and 67.34, respectively. The free energy change (DeltaG degrees ) for Cu(II) and Cr(III) sorption process was found to be -0.829 kJ/mol and -1.85 kJ/mol, respectively, which indicates the spontaneous nature of sorption process. Other thermodynamic parameters such as entropy change (DeltaS degrees ), enthalpy (DeltaH degrees )and activation energy (DeltaE) were found to be 0.604 J mol(-1)K(-1), -186.95 kJ/mol and 68.53 kJ/mol, respectively for Cu(II) and 0.397 J mol(-1)K(-1), -119.79 kJ/mol and 114.45 kJ/mol, respectively for Cr(III). The main novelty of this work was the determination of shortest possible sorption time for Cu(II) and Cr(III) in comparison to earlier studies. Almost over 98% of Cu(II) and Cr(III) were removed in only first 20 min at an initial concentration of 100 mg/L.

Reporting effective extraction methodology and chemical characterization of bioactive components of under explored Platycladus orientalis (L.) Franco from semi-arid climate.

The bioactive ingredients of many essential oils are complex and difficult to reproduce synthetically. In the present study, the influence of extraction method on relative extraction of bioactive compounds of essential oil of Platycladus orientalis (L.) Franco (Thuja orientalis L. is a synonym of it) leaves gathered from semi-arid climate was studied. A higher yield of essential oil was obtained by hydrodistillation (0.1%) as compared to steam distillation (0.07%) under newly optimized conditions. Initial analysis of these oils by TLC showed the presence of different polarity groups ranging from non-polar terpene hydrocarbons to polar terpenoid alcohols. GC-MS analysis revealed that major component of hydrodistilled essential oil of Platycladus orientalis (L.) Franco leaves was α-pinene (17.83%) and steam distilled essential oil contained α-cedrol (12.44%). The results obtained in the present study emphasize that suitable extraction technique should be used to obtain particular component of interest.

Single-Pot Synthesis of Biodiesel using Efficient Sulfonated-Derived Tea Waste-Heterogeneous Catalyst.

The main purpose of this manuscript is to report the new usage of tea waste (TW) as a catalyst for efficient conversion of palm fatty acid distillate (PFAD) to biodiesel. In this work, we investigate the potential of tea waste char as a catalyst for biodiesel production before and after sulfonation. The activated sulfonated tea waste char catalyst was characterized using Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray diffractometry (XRD), elemental composition (CHNS), nitrogen adsorption-desorption using Brunauer-Emmett-Teller (BET) and ammonia-temperature-programmed desorption (NH3-TPD). The activated tea waste char catalyst shows higher acid density of 31 µmol g-1 as compared to tea waste char of 16 µmol g-1 and higher surface area of 122 m2/g. The optimum fatty acid conversion conditions were found that 4 wt % of catalyst loading with 9:1 of methanol:PFAD for 90 min of reaction time at 65 °C gives 97% free fatty acid (FFA) conversion. In conclusion, the sulfonated tea waste (STW) catalyst showed an impressive catalytic activity towards the esterification of PFAD at optimum reaction conditions with significant recyclability in five successive cycles without any reactivation step.

Physical and chemical modification of distillery sludge for Pb(II) biosorption.

The waste distillery sludge from sugar-cane industry was pretreated physically (boiled, heated and autoclaved) as well as chemically (HCl, H(2)SO(4), H(3)PO(4), NaOH, Ca(OH)(2), Al(OH)(3), C(6)H(6), HCHO, CH(3)OH and C1(2)H(25)OSO(3)Na (sodium dodecyl sulphate (SDS)) for assessing the comparative sorption capacity of untreated and modified distillery sludge for Pb(II) biosorption from aqueous solutions. Experiments were conducted in shake flasks on a batch basis to access the effect of different experimental parameters such as pH, biosorbent dosage, biosorbent size, initial Pb(II) concentration and contact time. The uptake capacity 'q' (mg/g) of untreated and pretreated distillery sludge was in following order: NaOH (51.29+/-1.21)>HCl (49.82+/-1.22)>HCHO (49.56+/-1.14)>H(2)SO(4) (47.71+/-1.20)>HgCl(2) (45.32+/-1.06)>Ca(OH)(2) (44.01+/-1.18)>MeOH (43.73+/-1.23)>C(6)H(6) (42.72+/-1.19)>H(3)PO(4) (42.01+/-1.17)>SDS (40.87+/-1.27)>autoclaved (40.23+/-1.24)>Boiled (39.95+/-1.19)>heated (38.87+/-1.32)>Al (OH)(3) (38.30+/-1.14)>untreated (37.76+/-1.21). In further parameter studies, the optimized biosorbent size was 0.250 mm at pH 5 and best dose was 0.05 g of biosorbent. The applicability of the Langmuir and Freundlich models for sorption process was tested and best fitted model was Langmuir with the coefficient of determination (R(2)) value, 0.97, the process followed second order kinetic mechanism.