RESUMO
Circumventing the attenuation of microwaves during the propagation is of prime importance to wireless communication towards higher carrier frequencies. Here, we propose a scheme of wireless communications via a functionalized meta-window constructed by an optically-transparent metasurface (OTM) consisting of indium tin oxide (ITO) patterns. When the signal is weak, the OTM can significantly strengthen the signal by focusing the incoming waves towards the windowsill, thus substantially enhancing the network speed. The intensity enhancement of microwaves at 5â GHz via an OTM is verified by both numerical simulations and experiments. Furthermore, the ability to increase the data transfer rate in a 5-GHz-WiFi environment is directly demonstrated. Our work demonstrates the feasibility of applying an optically-transparent meta-window for enhancing wireless communications.
RESUMO
Hexagonal boron nitride/graphene (hBN/G) vertical heterostructures have attracted extensive attention, owing to the unusual physical properties for basic research and electronic device applications. Here we report a facile deposition-segregation technique to synthesize hBN/G heterostructures on recyclable platinum (Pt) foil via low pressure chemical vapor deposition. The growth mechanism of the vertical hBN/G is demonstrated to be the surface deposition of hBN on top of the graphene segregated from the Pt foil with pre-dissolved carbon. The thickness of hBN and graphene can be controlled separately from sub-monolayer to multilayer through the fine control of the growth parameters. Further investigations by Raman, scanning Kelvin probe microscopy and transmission electron microscope show that the hBN/G inclines to form a heterostructure with strong interlayer coupling and with interlayer twist angle smaller than 1.5°. This deposition-segregation approach paves a new pathway for large-scale production of hBN/G heterostructures and could be applied to synthesize of other van der Waals heterostructures.
RESUMO
Corrosion of metals in atmospheric environments is a worldwide problem in industry and daily life. Traditional anticorrosion methods including sacrificial anodes or protective coatings have performance limitations. Here, we report atomically thin, polycrystalline few-layer graphene (FLG) grown by chemical vapor deposition as a long-term protective coating film for copper (Cu). A six-year old, FLG-protected Cu is visually shiny and detailed material characterizations capture no sign of oxidation. The success of the durable anticorrosion film depends on the misalignment of grain boundaries between adjacent graphene layers. Theoretical calculations further found that corrosive molecules always encounter extremely high energy barrier when diffusing through the FLG layers. Therefore, the FLG is able to prevent the corrosive molecules from reaching the underlying Cu surface. This work highlights the interesting structures of polycrystalline FLG and sheds insight into the atomically thin coatings for various applications.
RESUMO
The piezoelectric characteristics of nanowires, thin films and bulk crystals have been closely studied for potential applications in sensors, transducers, energy conversion and electronics. With their high crystallinity and ability to withstand enormous strain, two-dimensional materials are of great interest as high-performance piezoelectric materials. Monolayer MoS2 is predicted to be strongly piezoelectric, an effect that disappears in the bulk owing to the opposite orientations of adjacent atomic layers. Here we report the first experimental study of the piezoelectric properties of two-dimensional MoS2 and show that cyclic stretching and releasing of thin MoS2 flakes with an odd number of atomic layers produces oscillating piezoelectric voltage and current outputs, whereas no output is observed for flakes with an even number of layers. A single monolayer flake strained by 0.53% generates a peak output of 15 mV and 20 pA, corresponding to a power density of 2 mW m(-2) and a 5.08% mechanical-to-electrical energy conversion efficiency. In agreement with theoretical predictions, the output increases with decreasing thickness and reverses sign when the strain direction is rotated by 90°. Transport measurements show a strong piezotronic effect in single-layer MoS2, but not in bilayer and bulk MoS2. The coupling between piezoelectricity and semiconducting properties in two-dimensional nanomaterials may enable the development of applications in powering nanodevices, adaptive bioprobes and tunable/stretchable electronics/optoelectronics.
RESUMO
Two-dimensional transition-metal dichalcogenides (TMDs) are unique candidates for the development of next-generation electronic devices. However, the large contact resistance between metal and the monolayer TMDs have significantly limited the devices' performance. Also, the integration of ultrathin high- k dielectric layers with TMDs remains difficult due to the lack of dangling bonds on the surface of TMDs. We present monolayer molybdenum disulfide field-effect transistors with bottom local gates consisting of monolayer graphene. The atomic-level thickness and surface roughness of graphene facilitate the growth of high-quality ultrathin HfO2 and suppress gate leakage. Strong displacement fields above 8 V/nm can be applied using a single graphene gate to electrostatically dope the MoS2, which reduces the contact resistances between Ni and monolayer MoS2 to 2.3 kΩ·µm at low gate voltages. The devices exhibit excellent switching characteristics including a near-ideal subthreshold slope of 64 millivolts per decade, low threshold voltage (â¼0.5 V), high channel conductance (>100 µS/µm), and low hysteresis. Scaled devices with 50 and 14 nm channels as well as ultrathin (5 nm) gate dielectrics show effective immunity to short-channel effects. The device fabricated on flexible polymeric substrate also exhibits high performance and has a fully transparent channel region that is desirable in optical-related studies and practical applications.
RESUMO
The behavior of n-Si(111) photoanodes covered by monolayer sheets of fluorinated graphene (F-Gr) was investigated under a range of chemical and electrochemical conditions. The electrochemical behavior of n-Si/F-Gr and np(+)-Si/F-Gr photoanodes was compared to hydride-terminated n-Si (n-Si-H) and np(+)-Si-H electrodes in contact with aqueous Fe(CN)6(3-/4-) and Br2/HBr electrolytes as well as in contact with a series of outer-sphere, one-electron redox couples in nonaqueous electrolytes. Illuminated n-Si/F-Gr and np(+)-Si/F-Gr electrodes in contact with an aqueous K3(Fe(CN)6/K4(Fe(CN)6 solutions exhibited stable short-circuit photocurrent densities of â¼10 mA cm(-2) for 100,000 s (>24 h), in comparison to bare Si electrodes, which yielded nearly a complete photocurrent decay over â¼100 s. X-ray photoelectron spectra collected before and after exposure to aqueous anodic conditions showed that oxide formation at the Si surface was significantly inhibited for Si electrodes coated with F-Gr relative to bare Si electrodes exposed to the same conditions. The variation of the open-circuit potential for n-Si/F-Gr in contact with a series of nonaqueous electrolytes of varying reduction potential indicated that the n-Si/F-Gr did not form a buried junction with respect to the solution contact. Further, illuminated n-Si/F-Gr electrodes in contact with Br2/HBr(aq) were significantly more electrochemically stable than n-Si-H electrodes, and n-Si/F-Gr electrodes coupled to a Pt catalyst exhibited ideal regenerative cell efficiencies of up to 5% for the oxidation of Br(-) to Br2.
RESUMO
Because of the drastically different intralayer versus interlayer bonding strengths, the mechanical, thermal, and electrical properties of two-dimensional (2D) materials are highly anisotropic between the in-plane and out-of-plane directions. The structural anisotropy may also play a role in chemical reactions, such as oxidation, reduction, and etching. Here, the composition, structure, and electrical properties of mechanically exfoliated WSe2 nanosheets on SiO2/Si substrates were studied as a function of the extent of thermal oxidation. A major component of the oxidation, as indicated from optical and Raman data, starts from the nanosheet edges and propagates laterally toward the center. Partial oxidation also occurs in certain areas at the surface of the flakes, which are shown to be highly conductive by microwave impedance microscopy. Using secondary ion mass spectroscopy, we also observed extensive oxidation at the WSe2-SiO2 interface. The combination of multiple microcopy methods can thus provide vital information on the spatial evolution of chemical reactions on 2D materials and the nanoscale electrical properties of the reaction products.
RESUMO
In graphene growth, island symmetry can become lower than the intrinsic symmetries of both graphene and the substrate. First-principles calculations and Monte Carlo modeling explain the shapes observed in our experiments and earlier studies for various metal surface symmetries. For equilibrium shape, edge energy variations δE manifest in distorted hexagons with different ground-state edge structures. In growth or nucleation, energy variation enters exponentially as â¼e(δE/k(B)T), strongly amplifying the symmetry breaking, up to completely changing the shapes to triangular, ribbonlike, or rhombic.
RESUMO
Chemical vapor deposited monolayer graphene is transferred onto atomically flat and ultra-thin muscovite mica to study the transport characteristics of graphene with a test structure of mica-based graphene field effect transistor (GFET). The transfer curve of the 24 nm mica-based GFET shows an effective carrier mobility of 2748 cm(2)/Vs and a transconductance of 3.36 µS, a factor of 2 and 7 larger than those values obtained from 40 nm SiO2 based GFET, respectively. The results demonstrate that mica is an excellent gate dielectric material due to its high dielectric constant, high dielectric strength, and atomically flat surface.
RESUMO
Electrochemical delamination is developed to transfer graphene for plastic electronics. The use of a sacrificial support during transfer is eliminated by depositing the target polyimide substrate directly onto graphene. A continuous and residue-free graphene surface with less line disruptions (such as ripples and wrinkles) is obtained on the target polyimide substrate, and good mechanical durability as well as low sheet resistance is obtained. The properties are competitive with conventional transparent conducting films.
RESUMO
Residual polymer (here, poly(methyl methacrylate), PMMA) left on graphene from transfer from metals or device fabrication processes affects its electrical and thermal properties. We have found that the amount of polymer residue left after the transfer of chemical vapor deposited (CVD) graphene varies depending on the initial concentration of the polymer solution, and this residue influences the electrical performance of graphene field-effect transistors fabricated on SiO2/Si. A PMMA solution with lower concentration gave less residue after exposure to acetone, resulting in less p-type doping in graphene and higher charge carrier mobility. The electrical properties of the weakly p-doped graphene could be further enhanced by exposure to formamide with the Dirac point at nearly zero gate voltage and a more than 50% increase of the room-temperature charge carrier mobility in air. This can be attributed to electron donation to graphene by the -NH2 functional group in formamide that is absorbed in the polymer residue. This work provides a route to enhancing the electrical properties of CVD-grown graphene even when it has a thin polymer coating.
Assuntos
Grafite/química , Polímeros/química , Dióxido de Silício/química , Transistores Eletrônicos , Cristalização , Condutividade Elétrica , Nanoestruturas/química , Polimetil Metacrilato/química , Propriedades de SuperfícieRESUMO
Graphene is widely known for its anomalously strong broadband optical absorptivity of 2.3% that enables seeing its single-atom layer with the naked eye. However, in the mid-infrared part of the spectrum graphene represents a quintessential lossless zero-volume plasmonic material. We experimentally demonstrate that, when integrated with Fano-resonant plasmonic metasurfaces, single-layer graphene (SLG) can be used to tune their mid-infrared optical response. SLG's plasmonic response is shown to induce large blue shifts of the metasurface's resonance without reducing its spectral sharpness. This effect is explained by a generalized perturbation theory of SLG-metamaterial interaction that accounts for two unique properties of the SLG that set it apart from all other plasmonic materials: its anisotropic response and zero volume. These results pave the way to using gated SLG as a platform for dynamical spectral tuning of infrared metamaterials and metasurfaces.
RESUMO
This study investigated the effects of combining Phragmites australis-based biochar, prepared at 400 °C, with various types of phosphate fertilizers-soluble, insoluble, and organic-on the content and transformation of phosphorus fractions in saline-alkali soil. Additionally, we explored microbiological mechanisms driving these transformations. The results showed that this combination significantly increased the concentrations of dicalcium phosphate (Ca2P), octacalcium phosphate (Ca8P), aluminum phosphate (AlP), moderately labile organic phosphorus (MLOP), and resistant organic phosphorus (MROP) in soil. Conversely, the levels of hydroxyapatite (Ca10P) and highly resistant organic phosphorus (HROP) decreased. The increase in labile organic phosphorus (LOP) content or decrease in iron phosphate (FeP) was found to effectively enhance the availability of Olsen phosphorus (Olsen-P) in soil. Furthermore, the study revealed that biochar mixed with organic phosphate fertilizers increased the activity of soil acid phosphatase (ACP) and neutral phosphatase (NEP), while reducing alkaline phosphatase (ALP) activity. In contrast, biochar combined with soluble and insoluble phosphate fertilizers decreased the activity of ACP (22.59 % and 28.57 %, respectively) and NEP (62.50 % and 11.11 %, respectively), with the combination with insoluble fertilizers also reducing ALP activity by 55.84 %, whereas the soluble combination increased it by 190.34 %. Additionally, the co-application of biochar and phosphate fertilizers altered the composition and abundance of the gene phoD-harboring microbial community, enhancing the abundance of Proteobacteria and reducing that of Actinobacteria. Correlation analysis between phoD-functional microbial species and various phosphorus fractions showed that Rhodopseudomonas was significantly associated with several phosphorus components, exhibiting a positive correlation with Ca2P, Ca8P, AlP, LOP, MLOP, and MROP, but a negative relationship with Ca10P. These findings suggest that the combined application of biochar and phosphate fertilizers could change the abundance of Rhodopseudomonas, potentially influencing phosphorus cycling in the soil. This research provides a strong scientific foundation for the efficient combined use of biochar and phosphate fertilizers in managing saline-alkali soil.
RESUMO
Baculovirus has been widely used for foreign protein expression in biomedical studies, and budded virus (BV) surface display has developed into an important research tool for heterogenous membrane protein studies. The basic strategy of surface display is to construct a recombinant virus where the target gene is fused with a complete or partial gp64 gene. In this study, we further investigate and develop this BV surface displaying strategy. We constructed stable insect cell lines to express the target protein flanking with different regions of signal peptide (SP) and GP64 transmembrane domain (TMD). Subsequently, recombinant BmNPV was used to infect the cell, and the integration of heterogeneous protein into BV was detected. The results indicated that deletion of the n-region of SP (SPΔn) decreased the incorporation rate more than that of the full-length SP. However, the incorporation rate of the protein fused with h and c-region deletion of SP (SPΔh-c) was significantly enhanced by 35-40 times compare to full-length SP. Moreover, the foreign protein without SP and TMD failed to display on the BV, while the integration of foreign proteins with GP64 TMD fusion at the c-terminal was significantly enhanced by 12-26 times compared to the control. Thus, these new strategies developed the BV surface display system further.
Assuntos
Nucleopoliedrovírus , Vírion , Animais , Nucleopoliedrovírus/genética , Nucleopoliedrovírus/metabolismo , Linhagem Celular , Vírion/genética , Vírion/metabolismo , Bombyx/virologia , Proteínas do Envelope Viral/genética , Proteínas do Envelope Viral/metabolismo , Sinais Direcionadores de Proteínas/genética , Domínios Proteicos , Células Sf9 , Montagem de VírusRESUMO
The glycoprotein GP64 of alphabaculovirus is crucial for viral entry and fusion. Here, we investigated the N-glycosylation patterns of Bombyx mori nucleopolyhedrovirus (BmNPV) GP64 and its signal peptide (SP) cleaved form, SPΔnGP64, along with their impacts on viral infectivity and fusogenicity. Through deglycosylation assays, we confirmed N-glycosylation of BmNPV GP64 on multiple sites. Mutational analysis targeting predicted N-glycosylation sites revealed diverse effects on viral infectivity and cell fusion. Particularly noteworthy were mutations at sites 175, which resulted in complete loss of infectivity and fusion capacity. Furthermore, LC-MS/MS analysis uncovered unexpected non-classical N-glycosylation sites, including N252, N302, N367, and N471, with only N302 and N471 identified in SPΔnGP64. Subsequent investigation highlighted the critical roles of these residues in BmNPV amplification and fusion, underscoring the essentiality of N367 glycosylation for GP64 fusogenicity. Our findings provide valuable insights into the non-classical glycosylation landscape of BmNPV GP64 and its functional significance in viral biology.
Assuntos
Bombyx , Nucleopoliedrovírus , Internalização do Vírus , Nucleopoliedrovírus/genética , Nucleopoliedrovírus/metabolismo , Nucleopoliedrovírus/fisiologia , Glicosilação , Animais , Bombyx/virologia , Bombyx/metabolismo , Proteínas do Envelope Viral/metabolismo , Proteínas do Envelope Viral/genética , Glicoproteínas/metabolismo , Glicoproteínas/genética , Sinais Direcionadores de Proteínas , Espectrometria de Massas em Tandem , MutaçãoRESUMO
Freestanding perovskite oxide membranes have drawn great attention recently since they offer exceptional structural tunability and stacking ability, providing new opportunities in fundamental research and potential device applications in silicon-based semiconductor technology. Among different types of sacrificial layers, the (Ca, Sr, Ba)3Al2O6 compounds are most widely used since they can be dissolved in water and prepare high-quality perovskite oxide membranes with clean and sharp surfaces and interfaces; However, the typical transfer process takes a long time (up to hours) in obtaining millimeter-size freestanding membranes, let alone realize wafer-scale samples with high yield. Here, a new member of the SrO-Al2O3 family, Sr4Al2O7 is introduced, and its high dissolution rate, ≈10 times higher than that of Sr3Al2O6 is demonstrated. The high-dissolution-rate of Sr4Al2O7 is most likely related to the more discrete Al-O networks and higher concentration of water-soluble Sr-O species in this compound. This work significantly facilitates the preparation of freestanding membranes and sheds light on the integration of multifunctional perovskite oxides in practical electronic devices.
RESUMO
We have devised a method to selectively fluorinate graphene by irradiating fluoropolymer-covered graphene with a laser. This fluoropolymer produces active fluorine radicals under laser irradiation that react with graphene but only in the laser-irradiated region. The kinetics of C-F bond formation is dependent on both the laser power and fluoropolymer thickness, proving that fluorination occurs by the decomposition of the fluoropolymer. Fluorination leads to a dramatic increase in the resistance of the graphene while the basic skeletal structure of the carbon bonding network is maintained. Considering the simplicity of the fluorination process and that it allows patterning with a nontoxic fluoropolymer as a solid source, this method could find application to generate fluorinated graphene in graphene-based electronic devices such as for the electrical isolation of graphene.
RESUMO
Acquiring homogeneous and reproducible wafer-scale transition metal dichalcogenide (TMDC) films is crucial for modern electronics. Metal-organic chemical vapor deposition (MOCVD) offers a promising approach for scalable production and large-area integration. However, during MOCVD synthesis, extraneous carbon incorporation due to organosulfur precursor pyrolysis is a persistent concern, and the role of unintentional carbon incorporation remains elusive. Here, we report the large-scale synthesis of molybdenum disulfide (MoS2) thin films, accompanied by the formation of amorphous carbon layers. Using Raman, photoluminescence (PL) spectroscopy, and transmission electron microscopy (TEM), we confirm how polycrystalline MoS2 combines with extraneous amorphous carbon layers. Furthermore, by fabricating field-effect transistors (FETs) using the carbon-incorporated MoS2 films, we find that traditional n-type MoS2 can transform into p-type semiconductors owing to the incorporation of carbon, a rare occurrence among TMDC materials. This unexpected behavior expands our understanding of TMDC properties and opens up new avenues for exploring novel device applications.
RESUMO
Photoresponsivity is a fundamental parameter used to quantify the ability of photoelectric conversion of a photodetector device. High-responsivity photodetectors are essential for numerous optoelectronic applications. Due to the strong light-matter interactions and the high carrier mobility, two-dimensional (2D) materials are promising candidates for the next-generation photodetectors. However, poor light absorption, lack of photoconductive gain, and the interfacial recombination lead to the relatively low responsivity of 2D photodetectors. The photogating effect, which extends the lifetime of photoexcited carriers, provides a simple approach to enhance responsivity in photodetector devices. Here, the O2 plasma treatment introduced surface traps on the SnS2 surface, leading to a gate-tunable photogating effect in SnS2/MoS2 heterojunctions. The heterojunction device exhibits an ultrahigh responsibility of up to 28 A/W. Moreover, the photodetector possesses a wide spectral photoresponse spanning from 300 to 1100 nm and a high specific detectivity (D*) of 4 × 1011 Jones under a 532 nm laser at VDS = 1 V. These results demonstrate that O2 plasma treatment is an efficient and simple avenue to achieve photogating effects, which can be employed to enhance the performance of van der Waals heterostructure photodetector devices and make them suitable for future integration into advanced electronic and optoelectronic systems.
RESUMO
Controlling the dynamic processes, such as generation, separation, transport, and recombination, of photoexcited carriers in a semiconductor is foundational in the design of various devices for optoelectronic applications. One may imagine that if different processes can be manipulated in one single device and thus generate useful signals, a multifunctional device can be realized, and the toolbox for integrated optoelectronics will be expanded. Here, we revealed that in a graphene/ZnTe/graphene van der Waals (vdW) heterostructure, the carriers can be generated by illumination from visible to infrared frequencies, and thus, the detected spectrum range extends to the communication band, well beyond the band gap of ZnTe (2.26 eV). More importantly, we are able to control the competition between separation and recombination of the photoexcited carriers by an electric bias along the thickness-defined channel of the ZnTe flake: as the bias increases, the photodetecting performance, e.g. response speed and photocurrent, are improved due to the efficient separation of carriers; synchronously, the photoluminescence (PL) intensity decreases and even switches off due to the suppressed recombination process. The ZnTe-based vdW heterostructure device thus integrates both photodetection and PL switching functions by manipulating the generation, separation, transport, and recombination of carriers, which may inspire the design of the next generation of miniaturized optoelectronic devices based on the vdW heterostructures made by various thin flakes.