Predictors of Intensive Care Admission in Hypoxemic Bronchiolitis Infants, Secondary Analysis of a Randomized Trial.

OBJECTIVES: To evaluate in a preplanned secondary analysis of our parent randomized controlled trial predictors of intensive care unit (ICU) admission in infants with bronchiolitis and analyze if these predictors are equally robust for children receiving high-flow or standard-oxygen. STUDY DESIGN: A secondary analysis of a multicenter, randomized trial of infants aged <12 months with bronchiolitis and an oxygen requirement was performed using admission and outcome data of all 1472 enrolled infants. The primary outcome was ICU admission. The predictors evaluated were baseline characteristics including physiological data and medical history. RESULTS: Of the 1472 enrolled infants, 146 were admitted to intensive care. Multivariate predictors of ICU admission were age (weeks) (OR: 0.98 [95% CI: 0.96-0.99]), pre-enrolment heart rate >160/min (OR: 1.80 [95% CI: 1.23-2.63]), pre-enrolment SpO2 (transcutaneous oxygen saturation) (%) (OR: 0.91 [95% CI: 0.86-0.95]), previous ICU admission (OR: 2.16 [95% CI: 1.07-4.40]), and time of onset of illness to hospital presentation (OR: 0.78 [95% CI: 0.65-0.94]). The predictors were equally robust for infants on high-flow nasal cannula therapy or standard-oxygen therapy. CONCLUSION: Age <2 months, pre-enrolment heart rate >160/min, pre-enrolment SpO2 of <87%, previous ICU admission and time of onset of ≤2 days to presentation are predictive of an ICU admission during the current hospital admission of infants with bronchiolitis independent of oxygenation method used. TRIAL REGISTRATION: ACTRN12613000388718.

Immunohistochemical study of mixing mineral trioxide aggregate with hyaluronic acid as a pulp-capping agent in dog teeth.

Objective: The purpose of this study was to evaluate the immunohistochemical effect of hyaluronic acid (HA) on the mineralization rate of the reparative dentin when it is used as a mixing medium with mineral trioxide aggregate (MTA). Materials and Methods: Direct pulp capping (DPC) was performed on 90 teeth from 10 dogs that had been experimentally exposed. The exposed pulps were divided into three groups according to the mixing medium with MTA: Group I: MTA + distilled water (control group), Group II: MTA + hybrid cooperative complex HA (HCC-HA), Group III: MTA + high molecular weight HA (HMW-HA). After pulp capping, all cavities were restored with final restoration. The dogs were divided randomly into five groups (two dogs each) according to the evaluation periods (7, 14, 21, 30, and 60) days. At the end of the study, the dogs were euthanized, and the sampled teeth were processed for immunohistochemical investigation. Results: Both types of HA (HCC-HA, HMW-HA) showed an increase in the expression of alkaline phosphatase (ALP) at a higher rate than using distilled water with MTA. Conclusions: Within the limitations of this study, HA proved to be an effective additive to MTA for DPC.

Investigating the Alkaline Potential of Mineral Trioxide Aggregate Repair Using Selenium Nanoparticles.

This study aimed to determine the effect of adding selenium nanoparticles (SeNPs) to mineral trioxide aggregate (MTA HP) concerning alkalinizing potential. Additionally, it examined the set material after SeNPs incorporation using Field Emission Scanning Electron Microscopy with Energy Dispersive X-ray analysis (FE-SEM/EDX) for characterizing the elemental composition and morphological alterations resulting from the integration of SeNPs. Cement samples, both before and after SeNPs incorporation, were examined using FE-SEM/EDX. The pH level was also measured with a pH-meter previously calibrated with solutions of known pH, to evaluate the alkalinizing activity of the integrated substance at different concentrations of nanoparticles: Group 1 (control): 0% w/w SeNPs, Group 2: 0.5% w/w SeNPs, Group 3: 1% w/w SeNPs, Group 4: 1.5% w/w SeNPs and Group 5: 2% w/w SeNPs after 1, 7, 14, and 30 days in distal water. The data were analyzed by one-way ANOVA and Tukey tests (P≤0.05). According to FE-SEM/EDX, the morphological characteristics indicate that SeNPs were successfully dispersed and integrated into the MTA repair matrix. EDX examination validates the presence of Selenium, confirming successful integration. The findings confirmed that the MTAHP showed a high pH level with a discernible reduction in the alkalinizing activity with each incorporated concentration of (SeNPs) that significantly differed from the control group across various periods at (P≤ 0.05). Consequently, the findings indicate that the addition of SeNPs to MTA HP has a notable impact on the pH of the storage solution, leading to a significant decrease in pH values for all concentrations and periods when compared to the control group. The alkalinizing action of MTA HP is highly affected by the incorporated SeNPs, making it more suitable for application in pulpal tissue. This study contributes to our understanding of the morphological alterations and elemental composition of SeNP-incorporated MTA HP, enhancing its potential applications in dental and tissue regeneration.

Este estudo teve como objetivo determinar o efeito da adição de nanopartículas de selênio (SeNPs) ao agregado de trióxido mineral (MTA HP) em relação ao potencial alcalinizante. Além disso, examinou o material do conjunto após a incorporação de SeNPs usando a microscopia eletrônica de varredura de emissão de campo com análise de raios X por dispersão de energia (FE-SEM/EDX) para caracterizar a composição elementar e as alterações morfológicas resultantes da integração de SeNPs. As amostras de cimento, antes e depois da incorporação de SeNPs, foram examinadas usando FE-SEM/EDX. O nível de pH também foi medido com um pH-metro previamente calibrado com soluções de pH conhecido, para avaliar a atividade alcalinizante da substância integrada em diferentes concentrações de nanopartículas: Grupo 1 (controle): 0% p/p de SeNPs, Grupo 2: 0,5% p/p de SeNPs, Grupo 3: 1% p/p de SeNPs, Grupo 4: 1,5% p/p de SeNPs e Grupo 5: 2% p/p de SeNPs após 1, 7, 14 e 30 dias em água distal. Os dados foram analisados por ANOVA unidirecional e testes de Tukey (P≤0,05). De acordo com o FE-SEM/EDX, as características morfológicas indicam que as SeNPs foram dispersas e integradas com sucesso na matriz de reparo do MTA. A análise de EDX valida a presença de selênio, confirmando a integração bem-sucedida. Os resultados confirmaram que o MTAHP apresentou alto nível de pH com uma redução perceptível na atividade alcalinizante com cada concentração incorporada de (SeNPs) que diferiu significativamente do grupo de controle em vários períodos de tempo (P≤ 0,05). Consequentemente, os resultados indicam que a adição de SeNPs ao MTA HP tem um impacto notável sobre o pH da solução de armazenamento, levando a uma redução significativa nos valores de pH para todas as concentrações e períodos de tempo quando comparados ao grupo de controle. A ação alcalinizante do MTA HP é altamente afetada pelas SeNPs incorporadas, tornando-o mais adequado para aplicação no tecido pulpar. Este estudo contribui para a nossa compreensão das alterações morfológicas e da composição elementar do MTA HP incorporado com SeNPs, aprimorando suas possíveis aplicações na regeneração dentária e tecidual.

Investigating the Effect of Selenium Nanoparticles on Mineral Trioxide Aggregates as a Promising Novel Dental Material.

Aim: To enhance mineral trioxide aggregate high plasticity (MTA HP), a commonly used dental calcium silicate cement, by incorporating selenium nanoparticles (SeNPs) known for their antioxidant and anti-inflammatory properties. The objectives included investigating the impact of SeNPs on the setting time and chemical properties of MTA HP. Materials and Methods: We performed a comprehensive study to formulate and profile SeNPs integrated into MTA HP. Diverse concentrations of SeNPs were introduced into MTA HP, and the commencement and culmination of the setting process were gauged employing a Gillmore needle cabinet. The chemical composition was validated using Fourier transform infrared spectroscopy with attenuated total reflectance and X-ray diffraction analysis. Results: The incorporation of SeNPs led to remarkable improvements. Notably, SeNPs positively affected the setting time of MTA HP, with faster setting times corresponding to higher SeNPs concentrations. Chemical analyses confirmed the successful integration of SeNPs with MTA HP. These enhancements make the material may be suitable for dental applications, especially due to its accelerated setting time. Conclusions: MTA HP incorporated with SeNPs represents a significant advancement in dental materials. Its faster setting time, combined with the antioxidant and anti-inflammatory properties of selenium, provides dental professionals with an efficient and time-saving option for complex treatments. This novel nanomaterial holds promise for improving dental procedures and patient outcomes.

Management of the infant born to a mother with tuberculosis: a systematic review and consensus practice guideline.

Infants born to mothers with tuberculosis disease are at increased risk of developing tuberculosis disease themselves. We reviewed published studies and guidelines on the management of these infants to inform the development of a consensus practice guideline. We searched MEDLINE, CINAHL, and Cochrane Library from database inception to Dec 1, 2022, for original studies reporting the management and outcome of infants born to mothers with tuberculosis. Of the 521 published papers identified, only three met inclusion criteria and no evidence-based conclusions could be drawn from these studies, given their narrow scope, variable aims, descriptive nature, inconsistent data collection, and high attrition rates. We also assessed a collection of national and international guidelines to inform a consensus practice guideline developed by an international panel of experts from different epidemiological contexts. The 16 guidelines reviewed had consistent features to inform the expert consultation process. Two management algorithms were developed-one for infants born to mothers considered potentially infectious at the time of delivery and another for mothers not considered infectious at the time of delivery-with different guidance for high and low tuberculosis incidence settings. This systematic review and consensus practice guideline should facilitate more consistent clinical management, support the collection of better data, and encourage the development of more studies to improve evidence-based care.

Chemical analysis of mineral trioxide agregate mixed with hyaluronic acids as an accelerant.

MATERIALS AND METHOD: Mineral trioxide aggregate (MTA) has many clinical applications in dentistry; the main drawback is the long setting. The main objective is to investigate and compare the chemical effect of using two commercially available hyaluronic acid hydrogels (HA) instead of distilled water for mixing MTA as an accelerant of setting time. Test materials were divided into three groups; Group 1: (control) mixing MTA with distilled water supplied by the manufacturer; Group 2: mixing MTA with a hybrid cooperative complex of high and low molecular weight HA (Profhilo®); Group 3: mixing MTA with High molecular weight / non-cross-linked HA (Jalupro®). Mixing time, and setting time (initial and final) were determined, Fourier-transform infrared spectroscopy, Energy-dispersive X-ray spectroscopy, Field emission Scanning Electron Microscopy, and X-ray diffraction were performed. RESULTS: mixing time, initial, and final setting time for (MTA + HA) groups were significantly different and lower in comparison to the control group (p < 0.05). This study revealed higher expression of calcium silicate hydrate and calcium hydroxide expression with higher Ca release in the MTA + HA group than the control group. CONCLUSION: commercially available HA demonstrated better chemical properties when used as a mixing medium for MTA. The Mixing and setting time for MTA + HA group were significantly shorter than those of the control group were. Thus, commercially available HA can be used as a mixing medium for MTA.

Thickness and yttria percentage influences the fracture resistance of laminate veneer zirconia restorations.

OBJECTIVES: Mechanical properties are cardinal for the long-term clinical success of laminate veneer restorations but the selection of new restorative materials should ideally be based on clinical evidence, therefore, in vitro testing of dental materials is a good alternative to evaluate their properties and understand their behavior so this study aimed to compare and evaluate the effect of two different thicknesses and yttria percentage on the fracture resistance of laminate veneer zirconia restorations. MATERIALS AND METHODS: Forty laminate veneer restoration prepared from partial sintering zirconia of 3Y (yttria), 5Y (yttria), combined 3Y&5Y (yttria), and lithium disilicate. Specimens were assigned into four main groups according to their percentage of yttria content (n = 10) and subgrouped into two thicknesses (0.5 mm thickness and 0.3 mm thickness) (n = 5) as follows: Group I, II, III, and IV (Group I for lithium disilicate (control), Group II for 3Y zirconia, Group III for 5Y zirconia, and Group IV for combined 3Y&5Y zirconia), each of them subdivided according to their thickness into two subgroups (n = 5 for each one) and resistance to fracture for each restoration was evaluated using a universal testing machine. Data were analyzed using a one-way analysis of variance and Duncan's tests at a 5% level of significance. RESULTS: The thickness of laminate veneer restoration significantly affects the fracture resistance value of all type of laminate veneers restorations (fracture resistance mean value was highest for 0.5 mm thickness and lower for 0.3 mm thickness restorations) and yttria percentage significantly affect fracture resistance value of zirconia laminate veneer restorations (fracture resistance mean value was highest for 0.5 mm thickness of 3Y zirconia [865 N] and combined 3Y&5Y zirconia [846 N]). CONCLUSIONS: Reducing the thickness of laminate zirconia veneer restorations to 0.3 mm reduces its fracture resistance and increasing yttria percentage had an adverse effect on fracture resistance of zirconia laminate veneer restorations.

Investigating the Alkaline Potential of Mineral Trioxide Aggregate Repair Using Selenium Nanoparticles

Resumo Este estudo teve como objetivo determinar o efeito da adição de nanopartículas de selênio (SeNPs) ao agregado de trióxido mineral (MTA HP) em relação ao potencial alcalinizante. Além disso, examinou o material do conjunto após a incorporação de SeNPs usando a microscopia eletrônica de varredura de emissão de campo com análise de raios X por dispersão de energia (FE-SEM/EDX) para caracterizar a composição elementar e as alterações morfológicas resultantes da integração de SeNPs. As amostras de cimento, antes e depois da incorporação de SeNPs, foram examinadas usando FE-SEM/EDX. O nível de pH também foi medido com um pH-metro previamente calibrado com soluções de pH conhecido, para avaliar a atividade alcalinizante da substância integrada em diferentes concentrações de nanopartículas: Grupo 1 (controle): 0% p/p de SeNPs, Grupo 2: 0,5% p/p de SeNPs, Grupo 3: 1% p/p de SeNPs, Grupo 4: 1,5% p/p de SeNPs e Grupo 5: 2% p/p de SeNPs após 1, 7, 14 e 30 dias em água distal. Os dados foram analisados por ANOVA unidirecional e testes de Tukey (P≤0,05). De acordo com o FE-SEM/EDX, as características morfológicas indicam que as SeNPs foram dispersas e integradas com sucesso na matriz de reparo do MTA. A análise de EDX valida a presença de selênio, confirmando a integração bem-sucedida. Os resultados confirmaram que o MTAHP apresentou alto nível de pH com uma redução perceptível na atividade alcalinizante com cada concentração incorporada de (SeNPs) que diferiu significativamente do grupo de controle em vários períodos de tempo (P≤ 0,05). Consequentemente, os resultados indicam que a adição de SeNPs ao MTA HP tem um impacto notável sobre o pH da solução de armazenamento, levando a uma redução significativa nos valores de pH para todas as concentrações e períodos de tempo quando comparados ao grupo de controle. A ação alcalinizante do MTA HP é altamente afetada pelas SeNPs incorporadas, tornando-o mais adequado para aplicação no tecido pulpar. Este estudo contribui para a nossa compreensão das alterações morfológicas e da composição elementar do MTA HP incorporado com SeNPs, aprimorando suas possíveis aplicações na regeneração dentária e tecidual.

Abstract This study aimed to determine the effect of adding selenium nanoparticles (SeNPs) to mineral trioxide aggregate (MTA HP) concerning alkalinizing potential. Additionally, it examined the set material after SeNPs incorporation using Field Emission Scanning Electron Microscopy with Energy Dispersive X-ray analysis (FE-SEM/EDX) for characterizing the elemental composition and morphological alterations resulting from the integration of SeNPs. Cement samples, both before and after SeNPs incorporation, were examined using FE-SEM/EDX. The pH level was also measured with a pH-meter previously calibrated with solutions of known pH, to evaluate the alkalinizing activity of the integrated substance at different concentrations of nanoparticles: Group 1 (control): 0% w/w SeNPs, Group 2: 0.5% w/w SeNPs, Group 3: 1% w/w SeNPs, Group 4: 1.5% w/w SeNPs and Group 5: 2% w/w SeNPs after 1, 7, 14, and 30 days in distal water. The data were analyzed by one-way ANOVA and Tukey tests (P≤0.05). According to FE-SEM/EDX, the morphological characteristics indicate that SeNPs were successfully dispersed and integrated into the MTA repair matrix. EDX examination validates the presence of Selenium, confirming successful integration. The findings confirmed that the MTAHP showed a high pH level with a discernible reduction in the alkalinizing activity with each incorporated concentration of (SeNPs) that significantly differed from the control group across various periods at (P≤ 0.05). Consequently, the findings indicate that the addition of SeNPs to MTA HP has a notable impact on the pH of the storage solution, leading to a significant decrease in pH values for all concentrations and periods when compared to the control group. The alkalinizing action of MTA HP is highly affected by the incorporated SeNPs, making it more suitable for application in pulpal tissue. This study contributes to our understanding of the morphological alterations and elemental composition of SeNP-incorporated MTA HP, enhancing its potential applications in dental and tissue regeneration.

Nasal High Flow in Room Air for Hypoxemic Bronchiolitis Infants.

Background: Bronchiolitis is the most common reason for hospital admission in infants, with one third requiring oxygen therapy due to hypoxemia. It is unknown what proportion of hypoxemic infants with bronchiolitis can be managed with nasal high-flow in room air and their resulting outcomes. Objectives and Settings: To assess the effect of nasal high-flow in room air in a subgroup of infants with bronchiolitis allocated to high-flow therapy in a recent multicenter randomized controlled trial. Patients and Interventions: Infants allocated to the high-flow arm of the trial were initially treated with room air high-flow if saturations were ≥85%. Subsequently, if oxygen saturations did not increase to ≥92%, oxygen was added and FiO2 was titrated to increase the oxygen saturations. In this planned sub-study, infants treated during their entire hospital stay with high-flow room air only were compared to infants receiving either standard-oxygen or high-flow with oxygen. Baseline characteristics, hospital length of stay and length of oxygen therapy were compared. Findings: In the per protocol analysis 64 (10%) of 630 infants commenced on high-flow room air remained in room air only during the entire stay in hospital. These infants on high-flow room air were on average older and presented with moderate hypoxemia at presentation to hospital. Their length of respiratory support and length of stay was also significantly shorter. No pre-enrolment factors could be identified in a multivariable analysis. Conclusions: In a small sub-group of hypoxemic infants with bronchiolitis hypoxemia can be reversed with the application of high-flow in room air only. Trial registration: ACTRN12615001305516.

Chemical analysis of mineral trioxide agregate mixed with hyaluronic acids as an accelerant

Abstract Mineral trioxide aggregate (MTA) has many clinical applications in dentistry; the main drawback is the long setting. The main objective is to investigate and compare the chemical effect of using two commercially available hyaluronic acid hydrogels (HA) instead of distilled water for mixing MTA as an accelerant of setting time. Materials and method: Test materials were divided into three groups; Group 1: (control) mixing MTA with distilled water supplied by the manufacturer; Group 2: mixing MTA with a hybrid cooperative complex of high and low molecular weight HA (Profhilo®); Group 3: mixing MTA with High molecular weight / non-cross-linked HA (Jalupro®). Mixing time, and setting time (initial and final) were determined, Fourier-transform infrared spectroscopy, Energy-dispersive X-ray spectroscopy, Field emission Scanning Electron Microscopy, and X-ray diffraction were performed. Results: mixing time, initial, and final setting time for (MTA + HA) groups were significantly different and lower in comparison to the control group (p < 0.05). This study revealed higher expression of calcium silicate hydrate and calcium hydroxide expression with higher Ca release in the MTA + HA group than the control group. Conclusion: commercially available HA demonstrated better chemical properties when used as a mixing medium for MTA. The Mixing and setting time for MTA + HA group were significantly shorter than those of the control group were. Thus, commercially available HA can be used as a mixing medium for MTA.

Resumo O agregado de trióxido mineral (MTA) tem muitas aplicações clínicas em odontologia, mas a principal desvantagem é a longa presa. O objetivo principal é investigar e comparar o efeito químico do uso de dois hidrogéis de ácido hialurônico (HA) disponíveis comercialmente em vez de água destilada para misturar o MTA como um acelerador do tempo de presa. Materiais e método: Os materiais de teste foram divididos em três grupos: Grupo 1: (controle) misturando o MTA com água destilada fornecida pelo fabricante; Grupo 2: misturando o MTA com um complexo cooperativo híbrido de HA de alto e baixo peso molecular (Profhilo®); Grupo 3: misturando o MTA com HA de alto peso molecular/não reticulado (Jalupro®). Foram determinados o tempo de mistura e o tempo de presa (inicial e final), a espectroscopia de infravermelho com transformada de Fourier, a espectroscopia de raios X com dispersão de energia, a microscopia eletrônica de varredura com emissão de campo e a difração de raios X. Resultados: o tempo de mistura, o tempo de presa inicial e final dos grupos (MTA + HA) foram significativamente diferentes e menores em comparação com o grupo de controle (p < 0,05). Esse estudo revelou maior expressão de silicato de cálcio hidratado e expressão de hidróxido de cálcio com maior liberação de Ca no grupo MTA + HA do que no grupo de controle. Conclusão: a HA disponível comercialmente demonstrou melhores propriedades químicas quando usada como meio de mistura para o MTA. O tempo de mistura e de presa do grupo MTA + HA foi significativamente menor do que o do grupo de controle. Portanto, a HA disponível comercialmente pode ser usada como meio de mistura para o MTA.

FTIR and SEM of a novel chemical conditioning on the zirconia intaglio surface

Objectives: The aim of this study was to evaluate chemical and topographical changes in the intaglio zirconia surface induced by chemical conditioning solutions using FTIR and SEM analysis. Material and method: twelve plates for each FTIR and SEM tests from each zirconia materials (UPCERA HT White, BruxZir® Solid Zirconia, and Copran® Multilayer), milled by a Yenadent CAD/CAM system, sintered and divided randomly into a three groups. A different surface conditioning was applied to the intaglio surface of each group: 30% hydrogen peroxide, 30% citric acid and control group. Result and discussion: by using of the FTIR spectroscopy, an evidence of new bands formation appeared at 1637cm-1 and 3352cm-1 due to the high oxidizing effect of hydrogen peroxide, and at 630cm-1 and 1663cm-1 due to the chelating action of citric acid, and simultaneously, SEM assessment of the surface topography took place, to identify lines, scratches, or surface dissociation that appeared on the intaglio zirconia surface after conditioning. Conclusion: such analysis provides an enhancement of new convenient, less expensive, reliable trials to improve micro-bond strength of luting cement to Y-TZP ceramics.

Predicting acute viral hepatitis serum markers (A and E) in patients with suspected acute viral hepatitis attending primary health care centers in Baghdad: a one year cross-sectional study.

BACKGROUND: Viral hepatitis is an important preventable infectious disease with various rates of occurrence in different areas of the world. The main objective of the present study was to evaluate the role of some risk factors in predicting a positive acute viral hepatitis marker among patients with suspected acute viral hepatitis in a primary health care setting in Baghdad. Besides, finding out the occurrence of jaundice, contribution of viruses A and E to the cases that have occurred in Baghdad province was also searched for. METHODS: Over a period of 1 year a descriptive cross sectional study was carried out at the primary health care centers in Baghdad. A questionnaire form was used to collect data about demographic factors and the results of the investigations. Total serum bilirubin and bilirubin in urine were done at the primary health care center laboratory. The rest of the sera samples were sent to Hepatitis referral Lab at Central Public Health Laboratory (CPHL) to be tested for anti HAV IgM and anti HEV IgM using ELISA technique. RESULTS: A total of 7,576,372 consultations to primary health care centers were recorded in Baghdad. Among those a total of 2,692 cases (35.5 per 100,000 consultations) were labeled as acute viral hepatitis cases. A positive hepatitis viral marker (A, B, C and E) was found in 1,332 cases (17.6 per 100,000 consultations). More than two fifths (44.8%) of cases were positive for anti-HAV antibodies and another 1.6% had positive anti-HEV antibodies. CONCLUSION: During 1 year period, the rate of occurrence of suspected acute viral hepatitis cases was 35.5 per 100000 of consultations to the primary health care centers in Baghdad. Of the total suspected cases, only 17.6 per 100000 of the consultations were positive for one of the viral hepatitis markers. Those who tested positive for one of the viral hepatitis markers represent 49.5% of the suspected cases. Proportion of anti HAV IgM positive tests among suspected cases was 44.8%. Factors that were able to predict positive Anti HAV IgM were (younger age group, negative history of cupping or tattooing, negative past history of jaundice). Male gender was the least important predictor of a positive case for anti HAV IgM. Proportion of Anti HEV IgM positive tests among suspected cases was 1.6%. Of the factors studied, only age was able to predict a positive Anti HEV IgM in those more than 15 years. Further studies are recommended.