RESUMO
Single-atom catalysis (SAC) attracts wide interest for zinc-air batteries that require high-performance bifunctional electrocatalysts for oxygen reactions. However, catalyst design is still highly challenging because of the insufficient driving force for promoting multiple-electron transfer kinetics. Herein, we report a superstructure-assisted SAC on tungsten carbides for oxygen evolution and reduction reactions. In addition to the usual single atomic sites, strikingly, we reveal the presence of highly ordered Co superstructures in the interfacial region with tungsten carbides that induce internal strain and promote bifunctional catalysis. Theoretical calculations show that the combined effects from superstructures and single atoms strongly reduce the adsorption energy of intermediates and overpotential of both oxygen reactions. The catalyst therefore presented impressive bifunctional activity with an ultralow potential gap of 0.623 V and delivered a high power density of 188.5 mW cm-2 for assembled zinc-air batteries. This work opens up new opportunities for atomic catalysis.
RESUMO
Room-temperature sodium-sulfur (RT Na-S) batteries hold immense promise as next-generation energy storage systems, owing to their exceptionally high theoretical capacity, abundant resources, eco-friendliness, and affordability. Nevertheless, their practical application is impeded by the shuttling effect of sodium polysulfides (NaPSs) and sluggish sulfur redox kinetics. In this study, an advanced strategy by designing 3D flower-like molybdenum telluride (MoTe2) as an efficient catalyst to promote sulfur redox for RT Na-S batteries is presented. The unique 3D flower-like MoTe2 effectively prevents NaPS shuttling and simultaneously offers abundant active catalytic sites facilitating polysulfide redox. Consequently, the obtained MoTe2/S cathode delivers an outstanding initial reversible capacity of 1015 mAh g-1 at 0.1 C, along with robust cycling stability of retaining 498 mAh g-1 at 1 C after 500 cycles. In addition, pouch cells are fabricated with the MoTe2 additive to deliver an ultrahigh initial discharge capacity of 890 mAh g-1 and remain stable over 40 cycles under practically necessary conditions, demonstrating the potential application in the commercialization of RT Na-S batteries.
RESUMO
Biomass-derived materials generally exhibit uniform and highly-stable hierarchical porous structures that can hardly be achieved by conventional chemical synthesis and artificial design. When used as electrodes for rechargeable batteries, these structural and compositional advantages often endow the batteries with superior electrochemical performances. This review systematically introduces the innate merits of biomass-derived materials and their applications as the electrode for advanced rechargeable batteries, including lithium-ion batteries, sodium-ion batteries, potassium-ion batteries, and metal-sulfur batteries. In addition, biomass-derived materials as catalyst supports for metal-air batteries, fuel cells, and redox-flow batteries are also included. The major challenges for specific batteries and the strategies for utilizing biomass-derived materials are detailly introduced. Finally, the future development of biomass-derived materials for advanced rechargeable batteries is prospected. This review aims to promote the development of biomass-derived materials in the field of energy storage and provides effective suggestions for building advanced rechargeable batteries.
RESUMO
Iron contributes to tumor initiation and progression; however, excessive intracellular free Fe2+ can be toxic to cancer cells. Our findings confirmed that multiple myeloma (MM) cells exhibited elevated intracellular iron levels and increased ferritin, a key protein for iron storage, compared with normal cells. Interestingly, Bortezomib (BTZ) was found to trigger ferritin degradation, increase free intracellular Fe2+, and promote ferroptosis in MM cells. Subsequent mechanistic investigation revealed that BTZ effectively increased NCOA4 levels by preventing proteasomal degradation in MM cells. When we knocked down NCOA4 or blocked autophagy using chloroquine, BTZ-induced ferritin degradation and the increase in intracellular free Fe2+ were significantly reduced in MM cells, confirming the role of BTZ in enhancing ferritinophagy. Furthermore, the combination of BTZ with RSL-3, a specific inhibitor of GPX4 and inducer of ferroptosis, synergistically promoted ferroptosis in MM cell lines and increased cell death in both MM cell lines and primary MM cells. The induction of ferroptosis inhibitor liproxstatin-1 successfully counteracted the synergistic effect of BTZ and RSL-3 in MM cells. Altogether, our findings reveal that BTZ elevates intracellular free Fe2+ by enhancing NCOA4-mediated ferritinophagy and synergizes with RSL-3 by increasing ferroptosisin MM cells.
Assuntos
Bortezomib , Sinergismo Farmacológico , Ferritinas , Ferroptose , Ferro , Mieloma Múltiplo , Coativadores de Receptor Nuclear , Humanos , Mieloma Múltiplo/metabolismo , Mieloma Múltiplo/tratamento farmacológico , Mieloma Múltiplo/patologia , Coativadores de Receptor Nuclear/metabolismo , Coativadores de Receptor Nuclear/genética , Bortezomib/farmacologia , Ferritinas/metabolismo , Ferroptose/efeitos dos fármacos , Ferro/metabolismo , Linhagem Celular Tumoral , Autofagia/efeitos dos fármacos , Antineoplásicos/farmacologia , CarbolinasRESUMO
Diallyl disulfide (DADS), one of the main components of garlic, is well known to have anticancer effects on multiple cancers. However, its efficacy in treating multiple myeloma (MM) is yet to be determined. We explored the effects of DADS on MM cells and investigated the synergistic effects of DADS when combined with five anti-MM drugs, including melphalan, bortezomib, carfilzomib, doxorubicin, and lenalidomide. We analyzed cell viability, cell apoptosis, and DNA damage to determine the efficacy of DADS and the drug combinations. Our findings revealed that DADS induces apoptosis in MM cells through the mitochondria-dependent pathway and increases the levels of γ-H2AX, a DNA damage marker. Combination index (CI) measurements indicated that the combination of DADS with melphalan has a significant synergistic effect on MM cells. This was further confirmed by the increases in apoptotic cells and DNA damage in MM cells treated with the two drug combinations compared with those cells treated with a single drug alone. The synergy between DADS and melphalan was also observed in primary MM cells. Furthermore, mechanistic investigations showed that DADS decreases reduced glutathione (GSH) levels and increases reactive oxygen species (ROS) production in MM cells. The addition of GSH is effective in neutralizing DADS cytotoxicity and inhibiting the synergy between DADS and melphalan in MM cells. Taken together, our study highlights the effectiveness of DADS in treating MM cells and the promising therapeutic potential of combining DADS and melphalan for MM treatment.
Assuntos
Ácido 4-Acetamido-4'-isotiocianatostilbeno-2,2'-dissulfônico/análogos & derivados , Compostos Alílicos , Dissulfetos , Melfalan , Mieloma Múltiplo , Humanos , Espécies Reativas de Oxigênio , Melfalan/farmacologia , Mieloma Múltiplo/tratamento farmacológico , Dano ao DNA , Apoptose , Combinação de MedicamentosRESUMO
Idiopathic pulmonary fibrosis (IPF) is an age-related disease. Failure of the proteostasis network with age, including insufficient autophagy, contributes to the pathology of IPF. Mechanisms underlying autophagy disruption in IPF are unclear and may involve regulation of USP (ubiquitin-specific protease) by post-translational modifications. To expand our previous observation of low USP13 expression in IPF, this study evaluated the role of USP13 in age-related lung fibrosis. Here, we demonstrated that Usp13-deficient aged mice exhibited impaired autophagic activity and increased vulnerability to bleomycin-induced fibrosis. Mechanistically, USP13 interacted with and deubiquitinated Beclin 1, and Beclin 1 overexpression abolished the effects of USP13 disruption. In addition, Beclin 1 inhibition resulted in insufficient autophagy and more severe lung fibrosis after bleomycin injury, consistent with the phenotype of aged Usp13-deficient mice. Collectively, we show a protective role of USP13 in age-related pulmonary fibrosis. Aging-mediated USP13 loss impairs autophagic activity and facilitates lung fibrosis through Beclin 1 deubiquitination. Our findings support the notion that age-dependent dysregulation of autophagic regulators enhances vulnerability to lung fibrosis.
Assuntos
Fibrose Pulmonar Idiopática , Pulmão , Animais , Camundongos , Autofagia , Proteína Beclina-1/genética , Proteína Beclina-1/metabolismo , Bleomicina/toxicidade , Fibrose Pulmonar Idiopática/metabolismo , Pulmão/patologia , Proteases Específicas de Ubiquitina/metabolismo , Proteases Específicas de Ubiquitina/farmacologiaRESUMO
Numerous studies have revealed severe damage to male fertility from severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection, raising concerns about the potential adverse impact on reproductive function of the coronavirus disease 2019 (COVID-19) vaccine developed based on the virus. Interestingly, there are several researchers who have studied the impact of the COVID-19 mRNA vaccine since then but have come up with conflicting results. As a near-ideal candidate for mass immunization programs, inactivated SARS-CoV-2 vaccine has been widely used in many countries, particularly in less wealthy nations. However, little is known about its effect on male fertility. Here, we conducted a retrospective cohort study at a single large center for reproductive medicine in China between December 2021 and August 2022. Five hundred and nineteen fertile men with no history of laboratory-confirmed COVID-19 were included and categorized into four groups based on their vaccination status: unvaccinated group (n = 168), one-dose vaccinated group (n = 8), fully vaccinated group (n = 183), and booster group (n = 160). All of them underwent a semen analysis and most had serum sex hormone levels tested. There were no significant differences in all semen parameters and sex hormone levels between the unvaccinated group and either vaccinated group. To account for possible vaccination-to-test interval-specific changes, sub-analyses were performed for two interval groups: ≤90 and >90 days. As expected, most of the semen parameters and sex hormone levels remained unchanged between the control and vaccinated groups. However, participants in vaccinated group (≤90 days) have decreased total sperm motility and increased follicle-stimulating hormone level compared with the ones in unvaccinated group. Moreover, some trends similar to those found during COVID-19 infection and recovery were observed in our study. Fortunately, all values are within the normal range. In addition, vaccinated participants reported few adverse reactions. No special medical intervention was required, and no serious adverse reactions happened. Our study suggests that inactivated SARS-CoV-2 vaccination does not impair male fertility, possibly due to the low frequency of adverse effects. This information reassures young male population who got this vaccine worldwide, and helps guide future vaccination efforts.
Assuntos
Vacinas contra COVID-19 , COVID-19 , Humanos , Masculino , Vacinas contra COVID-19/efeitos adversos , SARS-CoV-2 , Estudos Retrospectivos , COVID-19/prevenção & controle , Motilidade dos Espermatozoides , Vacinação , Vacinação em Massa , FertilidadeRESUMO
Lithium-organosulfur (Li-OS) batteries, despite possessing high theoretical specific capacity, encounter a few practical challenges, including unsatisfactory lifespan and low active material utilization under realistic conditions. Here, diisoropyl xanthogen polysulfide (DIXPS) has been selected as a model organosulfur compound to investigate the practical feasibility of Li-OS batteries under realistic conditions. A well-designed freestanding carbon sponge decorated with Fe3 N nanoparticles (C@Fe3 N) is introduced into the Li-OS cells as a scaffold for both Li and DIXPS. The lithiophilic property of the C@Fe3 N host guides uniform lithium deposition at the anode, and the catalysis of the DIXPS conversion reaction promotes the kinetics at the cathode. Impressively, the synergistic effect of C@Fe3 N leads to an extremely stable cycling performance over 1 000 cycles in a Li-OS full cell under realistic conditions.
RESUMO
This study aimed to examine the relationship between electronic cigarette use and subsequent combustible cigarette use, controlling for confounding by using a propensity score method approach. Data from the first three annual waves of the Population Assessment of Tobacco and Health study were analyzed (n = 6309). Participants were tobacco-naïve at Wave 1; used e-cigarettes exclusively (n = 414), used combustible cigarettes exclusively (n = 46), or not used any tobacco products (n = 5849) at Wave 2. We conducted entropy balancing propensity score analysis to examine the association between exclusive e-cigarette or cigarette initiation and subsequent cigarette use at Wave 3, adjusting for non-response bias, sampling bias, and confounding. Among tobacco-naïve youth, exclusive e-cigarette use was associated with greater risk for subsequent combustible cigarette smoking initiation (OR = 3.42, 95% CI = (1.99, 5.93)) and past 30-day combustible cigarette use (OR = 2.88, 95% CI = (1.22, 6.86)) in the following year. However, the latter risk was comparatively lower than the risk if youth started with a combustible cigarette (OR = 25.79, 95% CI = (9.68, 68.72)). Results of sensitivity analyses indicated that estimated effects were robust to unmeasured confounding. Use of e-cigarettes in tobacco-naïve youth is associated with increased risk of subsequent past 30-day combustible cigarette use but the risk is an order of magnitude higher if they start with a combustible cigarette.
Assuntos
Sistemas Eletrônicos de Liberação de Nicotina , Produtos do Tabaco , Vaping , Adolescente , Entropia , Humanos , Pontuação de Propensão , Vaping/epidemiologiaRESUMO
Lithium (Li) metal shows great potential for achieving high-energy-density rechargeable batteries. However, the practical applications of Li-metal batteries are still challenged by the formation of Li dendrites and unstable solid-electrolyte interphase (SEI) on metallic Li. Herein, a thin covalent organic framework layer is in situ fabricated on Li (COF-Li) to suppress Li dendrite growth and mitigate the side reaction on the Li anode. The COF has a periodic and uniform porosity, allowing for selectively sieving Li ions and guiding a uniform Li deposition. As a result, the COF-Li exhibits a non-dendrite morphology during repeated Li plating/stripping and demonstrates a remarkable cycle life over 13 200â h with an extremely low overpotential of only 16â mV at a high current density of 10â mA cm-2 and a high areal capacity of 10â mAh cm-2 .
RESUMO
Ambient-temperature sodium-sulfur batteries are an appealing, sustainable, and low-cost alternative to lithium-ion batteries due to their high material abundance and specific energy of 1274 W h kg-1. However, their viability is hampered by Na polysulfide (NaPS) shuttling, Na loss due to side reactions with the electrolyte, and dendrite formation. Here, we demonstrate that a solid-electrolyte interphase rich in inorganic components can be realized at both the sulfur cathode and the Na anode by tweaking the solvation structure of the electrolyte. This transforms the sulfur redox process from conventional dissolution-precipitation chemistry into a quasi-solid-state reaction, which eliminates NaPS shuttling and facilitates dendrite-free Na-metal plating and stripping. With the solvated ionic liquid electrolyte structure, a high initial capacity of 922 mA h g-1 with a capacity fade of as low as 0.10% per cycle over 300 cycles was achieved. The scalability of this approach to pouch cells with practically necessary parameters demonstrates its potential for practical viability.
RESUMO
The slow redox kinetics during cycling process and the serious shuttle effect caused by the solubility of lithium polysulfides (LiPSs) dramatically hinder the practical application of Li-S batteries. Herein, a facile and scalable spray-drying strategy is presented to construct conductive polar Mo2 C quantum dots-decorated carbon nanotube (CNT) networks (MCN) as an efficient absorbent and electrocatalyst for Li-S batteries. The results reveal that the MCN/S electrode exhibits a high specific capacity of 1303.3 mAh g-1 at 0.2 C, and ultrastable cycling stability with decay of 0.019% per cycle even at 1 C. Theoretical simulation uncovers that Mo2 C exhibits much stronger binding energies for S8 and Li2 Sn . The energy barrier for the conversion between Li2 S4 and Li2 S2 decreases from 1.02 to 0.72 eV when hybriding with Mo2 C. Furthermore, in situ discharge/charge-dependent Raman spectroscopy shows that long-chain Li2 S8 configuration is generated via S8 ring opening near the first plateaus at ≈2.36 V versus Li/Li+ and the S6 2- configuration in CNT/S electrode is maintained below the potential of ≈2.30 V versus Li/Li+ , indicating that the shuttle of soluble LiPSs happens during the whole discharge process. This work provides deep insights into the polar nanoarchitecture design and scalable fabrication for advanced Li-S batteries.
RESUMO
BACKGROUND: Although some evidence suggests that residential greenness may prevent hypertension in urban areas, limited attention has been paid to urban-rural disparities in the association of greenness with hypertension in rapidly urbanizing developing countries. OBJECTIVES: The current study investigated the association between the amount of neighbourhood greenness and hypertension among middle and older aged people in Chinese urban and rural areas. It further examined whether PM2.5 (particulate matter ≤2.5 µm in aerodynamic diameter) concentrations, physical activity, and body mass index (BMI) mediated the association of greenness with hypertension. METHODS: We used data from 11 486 adults aged 50 years or above within the first wave of the Study on Global Ageing and Adult Health in China during 2007-2010. Hypertension was assessed by criterion-based measures of blood pressure. Residential greenness was characterized by satellite-derived Normalized Difference Vegetation Index. We employed multilevel generalized structural equation models to estimate the association between neighbourhood greenness and hypertension in urban and rural areas. Serial mediation models have been performed to test potential pathways linking greenness to hypertension. RESULTS: In rural areas, a greater amount of residential greenness was directly associated with a decrease in the odds of hypertension (odds ratio = 0.51, 95% confidence interval 0.29-0.89). No direct association was observed in urban areas (odds ratio = 1.33, 95% confidence interval 0.94-1.89). Serial mediation models showed that the association of greenness with hypertension was completely mediated by PM2.5 concentrations in urban areas, while the association of greenness with hypertension was only partially mediated by PM2.5 concentrations and serial PM2.5 concentrations-physical activity path in rural areas. There was no evidence that physical activity, air pollution-BMI path, air pollution-physical activity-BMI path, and physical activity-BMI path mediated the association in both urban and rural areas. CONCLUSIONS: Higher neighbourhood greenness was directly associated with a lower prevalence of hypertension among middle and older aged adults in rural China but not in urban areas. The association of greenness with hypertension was completely mediated by air pollution (without any mediation effect of physical activity and BMI) in urban areas. In contrast, the association was partly mediated by air pollution, physical activity, and other unobservables in rural areas. Further longitudinal studies are warranted to prove a cause-and-effect association, which may help policymakers and practitioners to conduce effective interventions to prevent and control the prevalence of hypertension and the attendant disease burden.
Assuntos
Poluentes Atmosféricos , Poluição do Ar , Hipertensão , Idoso , Poluição do Ar/análise , China/epidemiologia , Exercício Físico , Humanos , Hipertensão/epidemiologia , Pessoa de Meia-Idade , Material Particulado/análiseRESUMO
This article aims to explore the underlying molecular mechanisms and prognosis-related genes in pancreatic cancer metastasis. Pancreatic cancer metastasis-related gene chip data were downloaded from GENE EXPRESSION OMNIBUS(GEO)database. Differentially expressed genes were screened after R-package pre-treatment. Functional annotations and related signalling pathways were analysed using DAVID software. GEPIA (Gene Expression Profiling Interactive Analysis) was used to perform prognostic analysis, and differential genes associated with prognosis were screened and validated using data from GEO. We screened 40 healthy patients, 40 primary pancreatic cancer and 40 metastatic pancreatic cancer patients, collected serum, designed primers and used qPCR to test the expression of prognosis-related genes in each group. 109 differentially expressed genes related with pancreatic cancer metastasis were screened, of which 49 were up-regulated and 60 were down-regulated. Functional annotation and pathway analysis revealed differentially expressed genes were mainly concentrated in protein activation cascade, extracellular matrix construction, decomposition, etc In the biological process, it is mainly involved in signalling pathways such as PPAR, PI3K-Akt and ECM receptor interaction. Prognostic analysis showed the expression levels of four genes were significantly correlated with the overall survival time of patients with pancreatic cancer, namely SCG5, CRYBA2, CPE and CHGB. qPCR experiments showed the expression of these four genes was decreased in both the primary pancreatic cancer group and the metastatic pancreatic cancer group, and the latter was more significantly reduced. Pancreatic cancer metastasis is closely related to the activation of PPAR pathway, PI3K-Akt pathway and ECM receptor interaction. SCG5, CRYBA2, CPE and CHGB genes are associated with the prognosis of pancreatic cancer, and their low expression suggests a poor prognosis.
Assuntos
Biomarcadores Tumorais , Biologia Computacional/métodos , Suscetibilidade a Doenças , Metástase Neoplásica , Neoplasias Pancreáticas/etiologia , Neoplasias Pancreáticas/mortalidade , Neoplasias Pancreáticas/patologia , Bases de Dados Genéticas , Perfilação da Expressão Gênica , Regulação Neoplásica da Expressão Gênica , Ontologia Genética , Redes Reguladoras de Genes , Humanos , Estimativa de Kaplan-Meier , Metástase Neoplásica/genética , Prognóstico , Transdução de Sinais , TranscriptomaRESUMO
As anodes of Li-ion batteries, copper oxides (CuO) have a high theoretical specific capacity (674 mA h g-1 ) but own poor cyclic stability owing to the large volume expansion and low conductivity in charges/discharges. Incorporating reduced graphene oxide (rGO) into CuO anodes with conventional methods fails to build robust interaction between rGO and CuO to efficiently improve the overall anode performance. Here, Cu2 O/CuO/reduced graphene oxides (Cu2 O/CuO/rGO) with a 3D hierarchical nanostructure are synthesized with a facile, single-step hydrothermal method. The Cu2 O/CuO/rGO anode exhibits remarkable cyclic and high-rate performances, and particularly the anode with 25 wt% rGO owns the best performance among all samples, delivering a record capacity of 550 mA h g-1 at 0.5 C after 100 cycles. The pronounced performances are attributed to the highly efficient charge transfer in CuO nanosheets encapsulated in rGO network and the mitigated volume expansion of the anode owing to its robust 3D hierarchical nanostructure.
RESUMO
The aim of this work was to study the removal of Cu (II) and U (VI) ions from aqueous solutions by encapsulating magnetic Fe3O4 nanoparticles into calcium alginate coated chitosan hydrochloride (CCM) hydrogel beads. ATR-FTIR and XRD analysis data indicated that the CCM composites were successfully prepared. SEM images and EDX spectra showed that Cu2+ and UO22+ ions were adhered onto sorbents. Adsorption properties for removal of both copper and uranium ions under various experimental conditions were investigated. Kinetic data and sorption equilibrium isotherms were also conducted in batch process. The sorption kinetic analysis revealed that sorption of Cu (II) and U (VI) followed the pseudo-second-order model well and exhibited 3-stage intraparticle diffusion model during the whole sorption process. Equilibrium data were best described by Langmuir model, and the CCM composite hydrogel beads showed the estimated maximum adsorption capacity 143.276mg/g and 392.692mg/g for Cu (II) and U (VI), respectively. The CCM adsorbent exhibited excellent reusability for five cycles use without significant changes in the adsorption capacity and structural stability. The results demonstrated that CCM can be an effective and promising sorbent for Cu (II) and U (VI) ions in wastewater.
Assuntos
Alginatos/química , Quitosana/química , Cobre/análise , Nanopartículas de Magnetita/química , Compostos de Urânio/análise , Poluentes Químicos da Água/análise , Purificação da Água/métodos , Adsorção , Ácido Glucurônico/química , Ácidos Hexurônicos/química , Hidrogéis/química , Concentração de Íons de Hidrogênio , Íons , Cinética , Modelos Teóricos , SoluçõesRESUMO
In this work, a novel sodium alginate (SA)/polyvinyl alcohol (PVA)/graphene oxide (GO) hydrogel microspheres were prepared by a simple method. Sodium alginate was physically crosslinked by Ca2+; GO was encapsulated into the composite to strengthen the hydrogels; PVA played a significant role in well dispersing of GO in SA. The SA/PVA/GO (SPG) hydrogels were employed as an efficient adsorbent for removal of Cu (II) and U (VI) from aqueous solution. Batch experiments with the subject of the pH, initial metal ion concentration, competing ions and contact time were investigated. Structure characterization was successfully conducted by FTIR, SEM, EDX, BET and XPS. Furthermore, the sorption kinetics of Cu2+ and UO22+ followed pseudo-second order model and exhibited 3-stage intraparticle diffusion model. Equilibrium data were best described by Langmuir model and the obtained maximum adsorption capacities of SPG hydrogel microspheres for Cu2+ and UO22+ were 247.16 and 403.78â¯mg/g, respectively. The difference in adsorption capacity can be confirmed by the percentage of elements in EDX spectra and the intension of peak of elements in XPS spectra. The SPG sorbent exhibited excellent reusability after 5 adsorption-desorption cycles. All results suggested that the prepared adsorbents could be considered as effective and promising materials for removal of Cu (II) and U (VI) in wastewater.
Assuntos
Alginatos/química , Cobre/isolamento & purificação , Grafite/química , Óxidos/química , Álcool de Polivinil/química , Urânio/isolamento & purificação , Ácido Glucurônico/química , Ácidos Hexurônicos/química , Hidrogéis/química , Concentração de Íons de Hidrogênio , Microesferas , Compostos de Urânio/isolamento & purificação , Águas Residuárias/químicaRESUMO
The terahertz (THz) modulators, as an essential component of the THz system, have been developed by many efforts until now. However, the development of flexible THz modulators is hindered due to the lack of flexible THz modulating materials. Herein, for the first time to the best of our knowledge, we demonstrated the feasibility of flexible THz modulators based on the coplanar-gate field-effect transistor (FET) structure of ion-gel/graphene/polyethylene terephthalate. The THz transmittance through this THz graphene modulator can be well controlled with a modulation depth up to 22% by tuning the carrier concentration of graphene via electrical gating. Furthermore, because of the integration of high flexibilities of graphene, ion-gel, and polyethylene terephthalate (PET), the proposed THz graphene modulator shows superior flexible performance, where the modulation properties can be maintained almost unchanged, not only under bending deformations, but also before and after bending 1000 times. In addition, due to the unique structure of ion-gel/graphene/PET, the flexible THz graphene modulator has a low insertion loss (1.2 dB). Therefore, this Letter is expected to be beneficial for the potential applications, ranging from the traditional compact THz system to a new flexible THz technology.
Assuntos
Grafite , Radiação Terahertz , Transistores Eletrônicos , Fenômenos MecânicosRESUMO
We designed a microfluidic chip as a proof of concept for the detection of bacterial DNA. The chip was fabricated with poly-dimethylsiloxane (PDMS). It included a solid phase extraction (SPE) chamber, two separate channels and multiple loop-mediated isothermal amplification (LAMP) chambers. Three bacterial strains (Escherichia coli O157:H7, methicillin-resistant Staphylococcus aureus and methicillin-sensitive S. aureus) were used to test the feasibility of the device. LAMP products were examined directly using a UV light and verified by agarose gel electrophoresis. Using this chip, we successfully detected E. coli O157:H7, MSSA and MRSA in less than 2 h. The detection limit for genes rfbE, spa and mecA (specific to E. coli O157:H7, MSSA and MRSA, respectively) was <10(2) CFU/100 µl. Further work is required to refine this approach and rigorously assess its analytical and diagnostic specificity and sensitivity.