Constructing Lanthanide-Organic Complexes for X-ray Scintillation and Imaging.

The photoluminescent properties of lanthanide complexes have been thoroughly investigated; however, there have been much fewer studies showcasing their potential use in ionizing radiation detection. In this work, we delve into the photo- and radio-induced luminescence of a series of lanthanide-bearing organic-inorganic hybrids and their potential as a platform for X-ray scintillation and imaging. The judicious synergy between lanthanide cations and 2,6-di(1H-pyrazol-1-yl)isonicotinate (bppCOO-) ligands affords six new materials with three distinct structures. Notably, Eu-bppCOO-1 and Tb-bppCOO-2 display sharp fingerprint X-ray-excited luminescence (XEL), the intensities of which can be linearly correlated with the X-ray dose rates over a broad dynamic range (0.007-4.55 mGy s-1). Moreover, the X-ray sensing efficacies of Eu-bppCOO-1 and Tb-bppCOO-2 were evaluated, showing that Tb-bppCOO-2 features a lower detection limit of 4.06 µGy s-1 compared to 14.55 µGy s-1 of Eu-bppCOO-1. Given the higher X-ray sensitivity and excellent radiation stability of Tb-bppCOO-2, we fabricated a flexible scintillator film for X-ray imaging by embedding finely ground Tb-bppCOO-2 in the polydimethylsiloxane (PDMS) polymer. The resulting scintillator film can be utilized for high-resolution X-ray imaging with a spatial resolution of approximately 7 lp mm-1.

Accurate identification of 8-oxoguanine in RNA with single-nucleotide resolution using ligase-dependent qPCR.

8-oxoguanine (o8G), a prevalent oxidative modification in RNA induced by reactive oxygen species (ROS), plays a pivotal role in regulating RNA functions. Accurate detection and quantification of o8G modifications is critical to understanding their biological significance and potential as disease biomarkers, but effective detection methods remain limited. Here, we have developed a highly specific T3 DNA ligase-dependent qPCR assay that exploits the enzyme's ability to discriminate o8G from guanine (G) with single-nucleotide resolution. This method can detect o8G in RNA at levels as low as 500 fM, with an up to 18-fold higher selectivity for discriminating o8G from G. By simulating oxidative stress conditions in SH-SY5Y and HS683 cell lines treated with rotenone, we successfully identified site-specific o8G modifications in key miRNAs associated with neuroprotective responses, including miR-124, let-7a and miR-29a. The developed assay holds significant promise for the practical identification of o8G, facilitating its potential for detailed studies of o8G dynamics in various biological contexts and diseases.

Cooperation between the Cu+ and Cu2+ species in CuCoAl layered double hydroxide and the substrate promoting effect afford a really simple protocol for the efficient synthesis of quinazolines.

In this study, a really simple and efficient catalytic protocol for the construction of quinazolines from alcohol and diamine has been developed based on CuCoAl layered double hydroxide (CuCoAl-LDH). The developed CuCoAl-LDH catalyst could accelerate the cascade reactions without any additives and tolerate various alcohols with satisfactory yields. Cooperation between the Cu+ and Cu2+ species in CuCoAl-LDH was observed in the cascade reaction, and they are believed to be responsible for the oxidation of alcohol and dehydrogenation of the intermediate, respectively. The promoting effect of the substrate diamine was observed in the oxidation of alcohol, which simplifies the reaction system by eliminating the requirement for a base additive. The catalytic system exhibited highly practical potential for the synthesis of quinazolines, as demonstrated through recyclability investigations and scale-up experiments. A possible catalytic mechanism has been proposed based on a series of control experiments and EPR analysis.

Microenvironment Modulation of Single-Atom Ru in ZrSBA-15 for CO2 Hydrogenation to Formic Acid.

The chemical microenvironment modulation of active sites holds promise for facilitating their catalytic performance. Herein, single-atom Ru anchored by ZrSBA-15 modified with diverse organic amine groups has been fabricated and enabled CO2 hydrogenation to produce formic acid (FA) under mild conditions. However, the reaction cannot be achieved without the modification of organic amines. The functional groups as the microenvironment around Ru active sites effectively regulated the activity, in which Ru encapsulated in ZrSBA-15 bearing -NH2 groups exhibited the highest activity, with turnover number (TON) and turnover frequency (TOF) values of 505 and 64 h-1, respectively. Both characterization and experimental results validated that the functional group manipulated the adsorption capacity of the reactant, the electronic state of Ru and hydrophilicity/hydrophobicity of the materials, and thus the catalytic performance.

Adsorption and Detection of Iodine Species by a Thorium-Based Metal-Organic Framework.

Actinide-bearing metal-organic frameworks (MOFs) encompass intriguing structures and properties, but the radioactivity of actinide cripples their applications. Herein, we have constructed a new thorium-based MOF (Th-BDAT) as a bifunctional platform for the adsorption and detection of radioiodine, a more radioactive fission product that can readily spread through the atmosphere in its molecular form or via solution as anionic species. The iodine capture within the framework of Th-BDAT from both the vapor phase and the cyclohexane solution has been verified, showing that Th-BDAT features maximum I2 adsorption capacities (Qmax) of 959 and 1046 mg/g, respectively. Notably, the Qmax of Th-BDAT toward I2 from cyclohexane solution ranks among the highest value for Th-MOFs reported to date. Furthermore, incorporating highly extended and π-electron-rich BDAT4- ligands renders Th-BDAT as a luminescent chemosensor whose emission can be selectively quenched by iodate with a detection limit of 1.367 µM. Our findings thus foreshadow promising directions that might unlock the full potential of actinide-based MOFs from the point of view of practical application.

Synergistic Enhancement of Photocatalytic H2 Evolution over NH2-MIL-125 Modified with Dual Cocatalyst.

The construction of efficient photocatalysts for water splitting to enable H2 evolution is pivotal to alleviate energy issues and environmental concerns. In this work, carbon dots (CDs) were prepared by employing "green solvent" ionic liquids as carbon sources and then combined with Pt/NH2-MIL-125, resulting in the emergence of a high-efficiency photocatalyst termed CDs-Pt/NH2-MIL-125 for the first time. This composite photocatalyst exhibited outstanding photocatalytic activity in H2 production under visible light irradiation. Notably, the H2 production rate of CDs100-Pt/NH2-MIL-125 reaches up to 951.4 µmol/g/h, which was 3.1 times that of Pt/NH2-MIL-125. The characterization results indicate that CDs and Pt uniformly dispersed on the surface of NH2-MIL-125 and fabricated a synergistic compact structure, providing a high BET surface area (985 m2 g-1) and a suitable band gap. Furthermore, the distinctive embeddable-dispersed CDs and Pt, as dual cocatalyst, can harvest light and facilitate the transfer of photogenerated electrons, thereby significantly augmenting the exploitation of visible light. The plausible mechanism of photocatalytic H2 evolution over the CDs-Pt/NH2-MIL-125 catalyst was also discussed. This work introduces a promising strategy for designing high-performance CDs-MOFs-based photocatalysts, an innovative step toward achieving efficient photocatalytic water splitting for H2 production.

Ligand-Mediated Regulation of the Chemical/Thermal Stability and Catalytic Performance of Isostructural Cobalt(II) Coordination Polymers.

Regulating the chemical/thermal stability and catalytic activity of coordination polymers (CPs) to achieve high catalytic performance is topical and challenging. The CPs are competent in promoting oxidative cross-coupling, yet they have not received substantial attention. Here, the ligand effect of the secondary ligand of CPs for oxidative cross-coupling reactions was investigated. Specifically, four new isostructural CPs [Co(Fbtx)1.5(4-R-1,2-BDC)]n (denoted as Co-CP-R, Fbtx = 1,4-bis(1,2,4-triazole-1-ylmethyl)-2,3,5,6-tetrafluorobenzene, 4-R-1,2-BDC = 4-R-1,2-benzenedicarboxylate, R = F, Cl, Br, CF3) were prepared. It was found that in the reactions of oxidative amination of benzoxazoles with secondary amines and the oxidative coupling of styrenes with benzaldehydes, both the chemical and thermal stabilities of the four Co-CPs with the R group followed the trend of -CF3 > -Br > -Cl > -F. Density functional theory (DFT) calculations suggested that the difference in reactivity may be ascribed to the effect of substituent groups on the electron transition energy of the cobalt(II) center of these Co-CPs. These findings highlight the secondary ligand effect in regulating the stability and catalytic performance of coordination networks.

Tau accelerates α-synuclein aggregation and spreading in Parkinson's disease.

The aggregation and prion-like propagation of α-synuclein are involved in the pathogenesis of Parkinson's disease. However, the underlying mechanisms regulating the assembly and spreading of α-synuclein fibrils remain poorly understood. Tau co-deposits with α-synuclein in the brains of Parkinson's disease patients, suggesting a pathological interplay between them. Here we show that tau interacts with α-synuclein and accelerates its aggregation. Compared with pure α-synuclein fibrils, the tau-modified α-synuclein fibrils show enhanced seeding activity, inducing mitochondrial dysfunction, synaptic impairment and neurotoxicity in vitro. Injection of the tau-modified α-synuclein fibrils into the striatum of mice induces more severe α-synuclein pathology, motor dysfunction and cognitive impairment when compared with the mice injected with pure α-synuclein fibrils. Knockout of tau attenuates the propagation of α-synuclein pathology and Parkinson's disease-like symptoms both in mice injected with α-syn fibrils and α-syn A53T transgenic mice. In conclusion, tau facilitates α-synuclein aggregation and propagation in Parkinson's disease.

Terahertz Time-of-Flight Ranging with Adaptive Clock Asynchronous Optical Sampling.

We propose and implement a terahertz time-of-flight ranging system based on adaptive clock asynchronous optical sampling, where the timing jitter is corrected in real time to recover the depth information in the acquired interferograms after compensating for laser instabilities using electronic signal processing. Consequently, the involved measurement uncertainties caused by the timing jitter during the terahertz sampling process and the noise intensity of the terahertz electric field have been reduced by the utilization of the adaptive clock. The achieved uncertainty range is about 2.5 µm at a 5 cm distance after averaging the acquisition time of 1876 ms 5000 times, showing a significant improvement compared with the asynchronous optical sampling using a constant clock. The implemented terahertz ranging system only uses free-running mode-locked lasers without any phase-locked electronics, and this favors simple and robust operations for subsequent applications that extend beyond the laboratory conditions.

Study on Properties and Degradation Behavior of Poly (Adipic Acid/Butylene Terephthalate-Co-Glycolic Acid) Copolyester Synthesized by Quaternary Copolymerization.

At present, the development and usage of degradable plastics instead of traditional plastics is an effective way to solve the pollution of marine microplastics. Poly (butylene adipate-co-terephthalate) (PBAT) is known as one of the most promising biodegradable materials. Nevertheless, the degradation rate of PBAT in water environment is slow. In this work, we successfully prepared four kinds of high molecular weight polyester copolyesters (PBATGA) via quaternary copolymerization. The results showed that the intrinsic viscosity of PBATGA copolymers ranged from 0.74 to 1.01 dL/g with a glycolic acid content of 0-40%. PBATGA copolymers had excellent flexibility and thermal stability. The tensile strength was 5~40 MPa, the elongation at break was greater than 460%, especially the elongation at break of PBATGA10 at 1235%, and the thermal decomposition temperature of PBATGA copolyesters was higher than 375 °C. It was found that PBATGA copolyester had a faster hydrolysis rate than PBAT, and the weight loss of PBATGA copolymers showed a tendency of pH = 12 > Lipase ≈ pH = 7 > pH = 2. The quaternary polymerization of PBAT will have the advantage of achieving industrialization, unlike the previous polymerization process. In addition, the polymerization of PBATGA copolyesters not only utilizes the by-products of the coal chemical industry, but also it can be promising in the production of biodegradable packaging to reduce marine plastic pollution.

Confirmation of 'Pollen- and Seed-Specific Gene Deletor' System Efficiency for Transgene Excision from Transgenic Nicotiana tabacum under Field Conditions.

The commercial application of genetically modified plants has been seriously impeded by public concern surrounding the potential risks posed by such plants to the ecosystem and human health. Previously, we have developed a 'pollen- and seed-specific Gene Deletor' system that automatically excised all transgenes from the pollen and seeds of greenhouse-grown transgenic Nicotiana tabacum. In this study, we conducted seven field experiments over three consecutive years to evaluate the stability of transgene excision under field conditions. Our results showed that transgenes were stably excised from transgenic Nicotiana tabacum under field conditions with 100% efficiency. The stability of transgene excision was confirmed based on PCR, as well as the GUS staining patterns of various organs (roots, leaves, petiole, stem, flower, fruit, and seeds) from transgenic N. tabacum. In six transgenic lines (D4, D10, D31, D56, and D43), the transgenes were stably deleted in the T0 and T1 generations. Thus, the 'Gene Deletor' system is an efficient and reliable method to reduce pollen- and seed-mediated unintentional gene flow. This system might help to alleviate the food safety concerns associated with transgenic crops.

Transformation of CO2 with Glycerol to Glycerol Carbonate over ETS-10 Zeolite-Based Catalyst.

Catalytic conversion of CO2 with the surplus glycerol (GL) produced from biodiesel manufacturing has attracted much academic and industrial attention, which proves the urgent requirement for developing high-performance catalysts to afford significant environmental benefits. Herein, titanosilicate ETS-10 zeolite-based catalysts with active metal species introduced by impregnation were employed for coupling CO2 with GL to efficiently synthesize glycerol carbonate (GC). The catalytic GL conversion at 170 °C miraculously reached 35.0% and a 12.7% yield of GC was obtained on Co/ETS-10 with CH3CN as a dehydrating agent. For comparison, Zn/ETS- Cu/ETS-10, Ni/ETS-10, Zr/ETS-10, Ce/ETS-10, and Fe/ETS-10 were also prepared, which showed inferior coordination between GL conversion and GC selectivity. Comprehensive analysis revealed that the presence of moderate basic sites for CO2 adsorption-activation played a crucial role in regulating catalytic activity. Moreover, the appropriate interaction between cobalt species and ETS-10 zeolite was also of great significance for improving the glycerol activation capacity. A plausible mechanism was proposed for the synthesis of GC from GL and CO2 in the presence of CH3CN solvent over Co/ETS-10 catalyst. Moreover, the recyclability of Co/ETS-10 was also measured and it proved to be recycled at least eight times with less than 3% decline in GL conversion and GC yield after a simple regeneration process through calcination at 450 °C for 5 h in air.

Poly(Butylene Adipate/Terephthalate-Co-Glycolate) Copolyester Synthesis Based on Methyl Glycolate with Improved Barrier Properties: From Synthesis to Structure-Property.

The main problem of manufacturing with traditional biodegradable plastics is that it is more expensive than manufacturing with polymers derived from petroleum, and the application scope is currently limited due to poor comprehensive performance. In this study, a novel biodegradable poly(butylene adipic acid/terephthalate-co-glycolic acid) (PBATGA) copolyester with 25-60% glycolic acid units was successfully synthesized by esterification and polycondensation using cheap coal chemical byproduct methyl glycolate instead of expensive glycolic acid. The structure of the copolyester was characterized by ATR-FTIR, 1H NMR, DSC, and XRD; and its barrier property, water contact angle, heat resistance, and mechanical properties were tested. According to the experiment result, the PBATGA copolyesters showed improved oxygen (O2) and water vapor barrier character, and better hydrophilicity when compared with PBAT. The crystallization peaks of PBATGAs were elevated from 64 °C to 77 °C when the content of the GA unit was 25 mol %, meanwhile, the elongation at the break of PBATGA25 was more than 1300%. These results indicate that PBATGA copolyesters have good potentiality in high O2 and water vapor barrier and degradable packaging material.

Unveiling the Unique Roles of Metal Coordination and Modulator in the Polymorphism Control of Metal-Organic Frameworks.

Polymorphism control of metal-organic frameworks is highly desired for elucidating structure-property relationships, but remains an empirical process and is usually done in a trial-and-error approach. We adopted the rarely used actinide cation Th4+ and a ditopic linker to construct a series of thorium-organic frameworks (TOFs) with a range of polymorphs. The extraordinary coordination versatility of Th4+ cations and clusters, coupled with synthetic modulation, gives five distinct phases, wherein the highest degree of interpenetration (threefold) and porosity (75.9 %) of TOFs have been achieved. Notably, the O atom on the capping site of the nine-coordinated Th4+ cation can function as a bridging unit to interconnect neighboring secondary building units (SBUs), affording topologies that are undocumented for other tetravalent-metal-containing MOFs. Furthermore, for the first time HCOOH has been demonstrated as a bridging unit of SBUs to further induce structural complexity. The resulting TOFs exhibit considerably different adsorption behaviors toward organic dyes, thus suggesting that TOFs represent an exceptional and promising platform for structure-property relationship study.

Boosting the Iodine Adsorption and Radioresistance of Th-UiO-66 MOFs via Aromatic Substitution.

Effective capture of radioactive iodine is of paramount importance for the safe and long-term storage of fission products in the nuclear fuel cycle. Herein, a series of functionalized Th-UiO-66 MOFs was employed as a model to investigate the effects of substituents on iodine adsorption in both solution and vapor states. Sorption studies revealed that the electro-donating amino group exhibits the most positive role on increasing the removal rate of iodine from cyclohexane and the uptake capacity of iodine vapor. Particularly, the disubstituted Th-UiO-66-(NH2 )2 can effectively remove 91.9 % of iodine (300 mg L-1 ) from cyclohexane and capture 969 mg g-1 iodine vapor, significantly higher than 59.6 % and 334 mg g-1 of untagged Th-UiO-66, respectively. In addition, the substituent effect on the radiolytic stability of MOFs was for the first time investigated, leading to the unearthing of one of the most radioresistant MOFs Th-UiO-66-NH2 reported to date.

Emergence of Thorium-Based Polyoxo Clusters as a Platform for Selective X-ray Dosimetry.

A brand-new application of thorium-bearing clusters in the field of ionizing radiation detection is exemplified by two novel hexanuclear thorium clusters, Th-bppCOO-1 and Th-bppCOO-2, which incorporate carboxylate-functionalized 2,6-di(pyrazol-1-yl)pyridine ligands. Notably, Th-bppCOO-1 is composed of an unprecedented [Th6(OH)4O4(H2O)5]12+ secondary building unit, the Th6 core of which is decorated by five H2O molecules. Furthermore, selective photoluminescence quenching responses of Th-bppCOO-1 and Th-bppCOO-2 toward X-ray over UV radiation have been demonstrated for the first time.

Interpenetration Control in Thorium Metal-Organic Frameworks: Structural Complexity toward Iodine Adsorption.

The rational design and synthesis of metal-organic frameworks with well-controlled interpenetration have been active research areas of inquiry, particularly for porosity-related applications. Herein, we extend the use of the ligand steric modulation strategy to initiate the first study of the interpenetration control of thorium-based MOFs. The approximate "hardness" of the Th4+ cation, which was conjugated with aromatic substitutions and delicately modified synthetic conditions, allows for the crystallization of single crystals of seven new Th-MOFs with five distinct topologies. Solvothermal reactions of Th(NO3)4 with the triphenyl H2TPDC ligand under variable conditions exclusively gave rise to an interpenetrated Th-MOF with a hex topology, namely Th-SINAP-16. Modifications of the ligand sterics with two pendant methyl groups to 2',5'-Me2TPDC2- and 2,2″-Me2TPDC2- afforded two noninterpenetrated UiO-68-type Th-MOFs (Th-SINAP-17 and Th-SINAP-20, respectively) with record-high pore volumes (74.8% and 75.3%, respectively) among all the thorium MOFs. Moreover, another four Th-MOFs Th-SINAP-n (n = 18, 19, 21, and 22) with three different topologies were obtained by a simple synthetic modulation. Notably, Th-SINAP-16 and Th-SINAP-21 represent the second rare examples of interpenetrated Th-MOFs reported to date. These findings revealed the unprecedented structural complexity and synthetic accessibility of Th-MOFs among all tetravalent metal containing MOFs. Such features make Th-MOFs as an ideal platform to elucidate the structure-property relationship for various applications, e.g. iodine adsorption.

VX-765 attenuates atherosclerosis in ApoE deficient mice by modulating VSMCs pyroptosis.

BACKGROUND AND AIMS: Recent clinical evidences show that patients with atherosclerotic cardiovascular disease can benefit from a targeting IL-1ß treatment. Caspase-1 is an important factor for pyroptosis and is responsible for mature and release of interleukin (IL)-1ß. Here we investigated the effect of caspase-1 inhibitor VX-765 on atherosclerosis and vascular smooth muscle cells (VSMCs) pyroptosis. METHODS: Human carotid artery plaques and aortas from ApoE-/- mice which were gavaged with VX-765 or vehicle while fed with western diet were examined for plaque burden using Oil Red O staining and Immunohistochemistry staining. Dedifferentiated primary cultured mice VSMCs treated with oxidized low-density lipoprotein (OxLDL) were applied to examine cell pyroptosis. RESULTS: The distribution of a-SMA and active pyroptotic indicators had a lot of overlaps near the necrotic core, at the lesion surface and in the intra-plaque hemorrhage area in human or mice plaque. In vitro studies further demonstrated that OxLDL induced VSMCs pyroptosis through activating NLRP3 inflammasome. What's more, VX-765 significantly inhibited the progression of established atheroma and the development of atherosclerosis, without substantially influence lipoprotein level in plasma. VX-765 also significantly reduced VSMCs pyroptosis and IL-1ß processing induced by OxLDL. CONCLUSIONS: VX-765 inhibits VSMCs pyroptosis during atherogenesis and targeting caspase-1 activity may be a potential treatment strategy for atherosclerotic diseases.

Tris(Butadiene) Compounds versus Butadiene Oligomerization in Second-Row Transition Metal Chemistry: Effects of Increased Ligand Fields.

The geometries, energetics, and preferred spin states of the second-row transition metal tris(butadiene) complexes (C4H6)3M (M = Zr-Pd) and their isomers, including the experimentally known very stable molybdenum derivative (C4H6)3Mo, have been examined by density functional theory. Such low-energy structures are found to have low-spin singlet and doublet spin states in contrast to the corresponding derivatives of the first-row transition metals. The three butadiene ligands in the lowest-energy (C4H6)3M structures of the late second-row transition metals couple to form a C12H18 ligand that binds to the central metal atom as a hexahapto ligand for M = Pd but as an octahapto ligand for M = Rh and Ru. However, the lowest-energy (C4H6)3M structures of the early transition metals have three separate tetrahapto butadiene ligands for M = Zr, Nb, and Mo or two tetrahapto butadiene ligands and one dihapto butadiene ligand for M = Tc. The low energy of the experimentally known singlet (C4H6)3Mo structure contrasts with the very high energy of its experimentally unknown singlet chromium (C4H6)3Cr analog relative to quintet (C12H18)Cr isomers with an open-chain C12H18 ligand.

Auxiliary Ligand-Dependent Adaptive Regulation of Uranyl Coordination in Mixed-Ligand Uranyl Compounds of Flexible Biphenyltetracarboxylic Acid.

The mixed-ligand strategy is one of the important methods for preparing new materials and regulating the properties of materials. In this work, by introducing different auxiliary ligands (ALs), we have obtained a series of mixed-ligand uranyl complexes (1-6) from a flexible biphenyltetracarboxylic acid (H4bptc) with an adjustable orthogonal conformation and studied the influence of different organic base molecules on the coordination and assembly of H4bptc with a uranyl cation. It is found that the coordinated ALs, including 4,4'-bipyridine-1,1'-dioxide and 1,10-phenanthroline, partially occupy the coordination sites of the uranyl center and directly affect the molecular conformations and uranyl coordination of flexible bptc linkers. On the other hand, noncoordinated ALs such as protonated 4,4'-bipyridine ([H2(4,4'-bpy)]2+) or dimethylammonium, which work as counterions in the form of encapsulated guests or hydrogen-bonded templates, also have a nonnegligible impact on the conformation and coordination of bptc linkers. Most interestingly, the AL-mediated evolution of uranyl coordination by the bptc linker and coordination geometry of the uranyl center is clearly observed, which suggests the adaptability of flexible bptc linkers to take suitable molecular configurations and uranyl coordination modes so as to adapt to the external regulator agents and varying environment. The physicochemical characterization of these uranyl compounds, especially photoluminescence, is addressed and discussed, and the results reveal that compound 5 has the potential to serve as a multifunctional radiation detection material for UV light and X-ray radiation.