Controlled Transport of Individual Microparticles Using Dielectrophoresis.

A dielectrophoretic device employing a planar array of microelectrodes is designed for controlled transport of individual microparticles. By exciting the electrodes in sequence, a moving dielectrophoretic force is created that can drag a particle across the electrodes in a straight line. The electrode shapes are designed to counter any lateral drift of the trapped particle during transport. This facilitates single particle transport by creating a narrow two-dimensional corridor for the moving dielectrophoretic force to operate on. The design and analysis processes are discussed in detail. Numerical simulations are performed to calculate the electromagnetic field distribution and the generated dielectrophoretic force near the electrodes. The Langevin equation is used for analyzing the trajectory of a microparticle under the influence of the external forces. The simulations show how the designed electrode geometry produces the necessary lateral confinement required for successful particle transport. Finally, experimental results are presented showing controlled bidirectional linear transport of single polystyrene beads of radius 10 and 5 µm for a distances 840 and 1100 µm, respectively. The capabilities of the proposed platform make it suitable for micro total analysis systems (µTAS) and lab-on-a-chip (LOC) applications.

Dynamically controlled dielectrophoresis using resonant tuning.

Electrically polarizable micro- and nanoparticles and droplets can be trapped using the gradient electric field of electrodes. But the spatial profile of the resultant dielectrophoretic force is fixed once the electrode structure is defined. To change the force profile, entire complex lab-on-a-chip systems must be re-fabricated with modified electrode structures. To overcome this problem, we propose an approach for the dynamic control of the spatial profile of the dielectrophoretic force by interfacing the trap electrodes with a resistor and an inductor to form a resonant resistor-inductor-capacitor (RLC) circuit. Using a dielectrophoretically trapped water droplet suspended in silicone oil, we show that the resonator amplitude, detuning, and linewidth can be continuously varied by changing the supply voltage, supply frequency, and the circuit resistance to obtain the desired trap depth, range, and stiffness. We show that by proper tuning of the resonator, the trap range can be extended without increasing the supply voltage, thus preventing sensitive samples from exposure to high electric fields at the stable trapping position. Such unprecedented dynamic control of dielectrophoretic forces opens avenues for the tunable active manipulation of sensitive biological and biochemical specimen in droplet microfluidic devices used for single-cell and biochemical reaction analysis.

Modeling of an X-ray grating-based imaging interferometer using ray tracing.

X-ray imaging by means of a grating-based Talbot-Lau interferometer has become an important tool for a wide variety of application areas such as security, medical and materials analysis. Imaging modalities include attenuation, differential phase contrast, and visibility contrast (or so-called dark field). We have developed a novel modeling approach based on ray tracing with commercially available software (Zemax OpticStudio) that yields image projections for all three modalities. The results compare favorably with experimental findings. Our polychromatic ray-based model accommodates realistic 3-D CAD objects with tailored materials properties and also allows for both surface and bulk scattering. As such, the model can simulate imaging of complicated objects as well as assist in a physical understanding of experimental projection details.

Modeling UV-C irradiation chambers for mask decontamination using Zemax OpticStudio.

Ultraviolet decontamination of personal protective equipment, particularly masks, is important in situations where mask reuse is practiced. To assist in the development of UV-C decontamination chambers, we have constructed ray tracing models in Zemax OpticStudio v20.1 for two distinct geometries, namely, a rectangular cabinet and a cylindrical can. These models provide irradiance distributions that can be used for comparison with experiment, as well as to predict local irradiance variation over the surface of a mask. In this paper we describe the model details, including: (1) a mask object in CAD format; (2) our assumptions for modeling surface properties; (3) the use of polygon object detectors for local irradiance analysis; and (4) experimental results that compare favorably to the simulations.

Construction and validation of UV-C decontamination cabinets for filtering facepiece respirators.

We present evidence-based design principles for three different UV-C based decontamination systems for N95 filtering facepiece respirators (FFRs) within the context of the SARS-CoV-2 outbreak of 2019-2020. The approaches used here were created with consideration for the needs of low- and middle-income countries (LMICs) and other under-resourced facilities. As such, a particular emphasis is placed on providing cost-effective solutions that can be implemented in short order using generally available components and subsystems. We discuss three optical designs for decontamination chambers, describe experiments verifying design parameters, validate the efficacy of the decontamination for two commonly used N95 FFRs (3M, #1860 and Gerson #1730), and run mechanical and filtration tests that support FFR reuse for at least five decontamination cycles.

In-plane near-field optical barrier on a chip.

Nanoparticles trapped on resonant near-field structures engraved on a metallic substrate experience forces due to the engravings, as well as the image-like interaction with the substrate. In the case of normally incident optical excitation, the force due to the substrate is solely perpendicular to its surface. Numerical simulations are presented to demonstrate that under the combined influence of the aforementioned forces, a plasmonic nanoparticle can be repelled from the engraving along the substrate, while attracting it towards the substrate along its normal. This behavior can be achieved over a range of excitation wavelengths of the short wavelength mode of the coupled particle-substrate-trap system. To the best of our knowledge, this is the first illustration of an in-plane near-field optical barrier on a chip. The barrier is stable against resistive heating of the nanoparticle, as well as the induced non-isothermal flow. The wavelength-dependent switch between the proposed in-plane potential barrier and the stable potential well can pave the way for the gated transport of single nanoparticles, while holding them bound to the chip.

On the substrate contribution to the back action trapping of plasmonic nanoparticles on resonant near-field traps in plasmonic films.

Nanoparticles trapped on resonant near-field apertures/engravings carved in plasmonic films experience optical forces due to the steep intensity gradient field of the aperture/engraving as well as the image like interaction with the substrate. For non-resonant nanoparticles the contribution of the substrate interaction to the trapping force in the vicinity of the trap (aperture/engraving) mode is negligible. But, in the case of plasmonic nanoparticles, the contribution of the substrate interaction to the low frequency stable trapping mode of the coupled particle-trap system increases as their resonance is tuned to the trap resonance. The strength of the substrate interaction depends on the height of the nanoparticle above the substrate. As a result, a difference in back action mechanism arises for nanoparticle displacements perpendicular to the substrate and along it. For nanoparticle displacements perpendicular to the substrate, the self induced back action component of the trap force arises due to changing interaction with the substrate as well as the trap. On the other hand, for displacements along the substrate, it arises solely due to the changing interaction with the trap. This additional contribution of the substrate leads to more pronounced back action. Numerical simulation results are presented to illustrate these effects using a bowtie engraving as the near-field trap and a nanorod as the trapped plasmonic nanoparticle. The substrate's role may be important in manipulation of plasmonic nanoparticles between successive traps of on-chip optical conveyor belts, because they have to traverse over regions of bare substrate while being handed off between these traps.

Accurate adjoint design sensitivities for nano metal optics.

We present a method for obtaining accurate numerical design sensitivities for metal-optical nanostructures. Adjoint design sensitivity analysis, long used in fluid mechanics and mechanical engineering for both optimization and structural analysis, is beginning to be used for nano-optics design, but it fails for sharp-cornered metal structures because the numerical error in electromagnetic simulations of metal structures is highest at sharp corners. These locations feature strong field enhancement and contribute strongly to design sensitivities. By using high-accuracy FEM calculations and rounding sharp features to a finite radius of curvature we obtain highly-accurate design sensitivities for 3D metal devices. To provide a bridge to the existing literature on adjoint methods in other fields, we derive the sensitivity equations for Maxwell's equations in the PDE framework widely used in fluid mechanics.

Nano-optical conveyor belt, part I: Theory.

We propose a method for peristaltic transport of nanoparticles using the optical force field over a nanostructured surface. Nanostructures may be designed to produce strong near-field hot spots when illuminated. The hot spots function as optical traps, separately addressable by their resonant wavelengths and polarizations. By activating closely packed traps sequentially, nanoparticles may be handed off between adjacent traps in a peristaltic fashion. A linear repeating structure of three separately addressable traps forms a "nano-optical conveyor belt"; a unit cell with four separately addressable traps permits controlled peristaltic transport in the plane. Using specifically designed activation sequences allows particle sorting.

Nano-optical conveyor belt, part II: Demonstration of handoff between near-field optical traps.

Optical tweezers have been widely used to manipulate biological and colloidal material, but the diffraction limit of far-field optics makes focused beams unsuitable for manipulating nanoscale objects with dimensions much smaller than the wavelength of light. While plasmonic structures have recently been successful in trapping nanoscale objects with high positioning accuracy, using such structures for manipulation over longer range has remained a significant challenge. In this work, we introduce a conveyor belt design based on a novel plasmonic structure, the resonant C-shaped engraving (CSE). We show how long-range manipulation is made possible by means of handoff between neighboring CSEs, and we present a simple technique for controlling handoff by rotating the polarization of laser illumination. We experimentally demonstrate handoff between a pair of CSEs for polystyrene spheres 200, 390, and 500 nm in diameter. We then extend this technique and demonstrate controlled particle transport down a 4.5 µm long "nano-optical conveyor belt."

Impedance matching in optically induced dielectrophoresis: Effect of medium conductivity on trapping force.

An impedance analysis for optically induced dielectrophoresis is presented. A circuit model is developed for this purpose. The model parameters are fully defined in terms of the geometrical and material properties of the system. It is shown that trapping force can only be generated when the material properties follow certain impedance matching conditions. The impedance match factor is introduced to succinctly quantify the phenomenon. It is used to calculate bounds on the allowed electrical conductivity of the suspension medium. Results from the proposed model are found to be in good agreement with full-wave numerical simulations. By computing the acceptable set of material parameters with little computational cost, the presented analysis can streamline ODEP system design for various applications.

Spectral tweezers: Single sample spectroscopy using optoelectronic tweezers.

A scheme that combines optoelectronic tweezers (OET) with spectroscopic analysis is presented. Referred to as spectral tweezers, the approach uses a single focused light beam that acts both as the trapping beam for OET and the probe beam for spectroscopy. Having simultaneous manipulation and spectral characterization ability, the method is used to isolate single micro-samples from clusters and perform spectral measurements. Experimental results show that a characteristic spectral signature can be obtained for a given sample. The proposed approach can be easily integrated into the optical setups used for conventional OETs with only a few additional optical components, making it a convenient tool for bio-analytical applications.

Dielectrophoretic bead-droplet reactor for solid-phase synthesis.

Solid-phase synthesis underpins many advances in synthetic and combinatorial chemistry, biology, and material science. The immobilization of a reacting species on the solid support makes interfacing of reagents an important challenge in this approach. In traditional synthesis columns, this leads to reaction errors that limit the product yield and necessitates excess consumption of the mobile reagent phase. Although droplet microfluidics can mitigate these problems, its adoption is fundamentally limited by the inability to controllably interface microbeads and reagent droplets. Here, we introduce Dielectrophoretic Bead-Droplet Reactor as a physical method to implement solid-phase synthesis on individual functionalized microbeads by encapsulating and ejecting them from microdroplets by tuning the supply voltage. Proof-of-concept demonstration of the enzymatic coupling of fluorescently labeled nucleotides onto the bead using this reactor yielded a 3.2-fold higher fidelity over columns through precise interfacing of individual microreactors and beads. Our work combines microparticle manipulation and droplet microfluidics to address a long-standing problem in solid-phase synthesis with potentially wide-ranging implications.

Topological visualization of the plasmonic resonance of a nano C-aperture.

The plasmonic response of a nano C-aperture is analyzed using the Vector Field Topology (VFT) visualization technique. The electrical currents that are induced on the metal surfaces when the C-aperture is excited by light is calculated for various wavelengths. The topology of this two-dimensional current density vector is analyzed using VFT. The plasmonic resonance condition is found to coincide with a distinct shift in the topology which leads to increased current circulation. A physical explanation of the phenomenon is discussed. Numerical results are presented to justify the claims. The analyses suggest that VFT can be a powerful tool for studying the physical mechanics of nano-photonic structures.

Microparticle electrical conductivity measurement using optoelectronic tweezers.

When it comes to simulate or calculate an optoelectronic tweezer (OET) response for a microparticle suspended in a given medium, a precise electrical conductivity (later referred to as conductivity) value for the microparticle is critical. However, there are not well-established measurements or well-referenced values for microparticle conductivities in the OET realm. Thus, we report a method based on measuring the escape velocity of a microparticle with a standard OET system to calculate its conductivity. A widely used 6 µm polystyrene bead (PSB) is used for the study. The conductivity values are found to be invariant around 2×10-3 S/m across multiple different aqueous media, which helps clarify the ambiguity in the usage of PSB conductivity. Our convenient approach could principally be applied for the measurement of multiple unknown OET-relevant material properties of microparticle-medium systems with various OET responses, which can be beneficial to carry out more accurate characterization in relevant fields.

Resolution improvement of optoelectronic tweezers using patterned electrodes.

An optoelectronic tweezer (OET) device is presented that exhibits improved trapping resolution for a given optical spot size. The scheme utilizes a pair of patterned physical electrodes to produce an asymmetric electric field gradient. This, in turn, generates an azimuthal force component in addition to the conventional radial gradient force. Stable force equilibrium is achieved along a pair of antipodal points around the optical beam. Unlike conventional OETs where trapping can occur at any point around the beam perimeter, the proposed scheme improves the resolution by limiting trapping to two points. The working principle is analyzed by performing numerical analysis of the electromagnetic fields and corresponding forces. Experimental results are presented that show the trapping and manipulation of micro-particles using the proposed device.

Dynamically controllable plasmonic tweezers using C-shaped nano-engravings.

A near-field optical trapping scheme using plasmonic C-shaped nano-engraving is presented. Utilizing the polarization sensitivity of the C-structure, a mechanism is proposed for dynamically controlling the electric field, the associated trapping force, and the plasmonic heating. Electromagnetic analysis and particle dynamics simulations are performed to verify the viability of the approach. The designed structure is fabricated and experimentally tested. Polarization control of the excitation light is achieved through the use of a half-wave plate. Experimental results are presented that show the functioning implementation of the dynamically adjustable plasmonic tweezers. The dynamic controllability can allow trapping to be maintained with lower field strengths, which reduces photo-thermal effects. Thus, the probability of thermal damage can be reduced when handling sensitive specimens.

Ultra-high resolution resonant C-shaped aperture nano-tip.

We report a new optical near-field transducer comprised of a metallic nano-antenna extending from the ridge of a C-shaped metallic nano-aperture. Finite-difference time domain simulations predict that the C-aperture nano-tip (CAN-Tip) provides high intensity (650x), high optical resolution (~λ/60), and background-free near-field illumination at a wavelength of 980 nm. The CAN-Tip has an aperture resonance and tip antenna resonance which may be tuned independently, so the structure can be made resonant at ultraviolet wavelengths without being unduly small. This near-field optical resolution of 16.1 nm has been experimentally confirmed by employing the CAN-Tip as an NSOM probe.

Microparticle transport along a planar electrode array using moving dielectrophoresis.

We present a device that can achieve controlled transport of colloidal microparticles using an array of micro-electrodes. By exciting the micro-electrodes in regular sequence with an AC voltage, a time-varying moving dielectrophoretic force-field is created. This force propels colloidal microparticles along the electrode array. Using this method, we demonstrate bidirectional transport of polystyrene micro-spheres. Electromagnetic simulation of the device is performed, and the dielectrophoretic force profile around the electrode array is mapped. We develop a Brownian dynamics model of the trajectory of a particle under the influence of the time-varying force-field. Numerical and experimental results showing controlled particle transport are presented. The numerical model is found to be in good agreement with experimental data. The developed numerical framework can be useful in designing and modeling lab-on-a-chip devices that employ external non-contact forces for micro-/nanoparticle manipulation.

Modeling Brownian Microparticle Trajectories in Lab-on-a-Chip Devices with Time Varying Dielectrophoretic or Optical Forces.

Lab-on-a-chip (LOC) devices capable of manipulating micro/nano-sized samples have spurred advances in biotechnology and chemistry. Designing and analyzing new and more advanced LOCs require accurate modeling and simulation of sample/particle dynamics inside such devices. In this work, we present a generalized computational physics model to simulate particle/sample trajectories under the influence of dielectrophoretic or optical forces inside LOC devices. The model takes into account time varying applied forces, Brownian motion, fluid flow, collision mechanics, and hindered diffusion caused by hydrodynamic interactions. We develop a numerical solver incorporating the aforementioned physics and use it to simulate two example cases: first, an optical trapping experiment, and second, a dielectrophoretic cell sorter device. In both cases, the numerical results are found to be consistent with experimental observations, thus proving the generality of the model. The numerical solver can simulate time evolution of the positions and velocities of an arbitrarily large number of particles simultaneously. This allows us to characterize and optimize a wide range of LOCs. The developed numerical solver is made freely available through a GitHub repository so that researchers can use it to develop and simulate new designs.