On-Surface Synthesis and Characterization of a Cycloarene: C108 Graphene Ring.

The synthesis of cycloarenes in solution is challenging because of their low solubility and the often hindered cyclodehydrogenation reaction of their nonplanar precursors. Using an alternative on-surface synthesis protocol, we achieved an unprecedented double-stranded hexagonal cycloarene containing 108 sp2 carbon atoms. Its synthesis is based on hierarchical Ullmann coupling and cyclodehydrogenation of a specially designed precursor on a Au(111) surface. The structure and other properties of the cycloarene are investigated by scanning tunneling microscopy/spectroscopy, atomic force microscopy, and density functional theory calculations.

Nanoribbons with Nonalternant Topology from Fusion of Polyazulene: Carbon Allotropes beyond Graphene.

Various two-dimensional (2D) carbon allotropes with nonalternant topologies, such as pentaheptites and phagraphene, have been proposed. Predictions indicate that these metastable carbon polymorphs, which contain odd-numbered rings, possess unusual (opto)electronic properties. However, none of these materials has been achieved experimentally due to synthetic challenges. In this work, by using on-surface synthesis, nanoribbons of the nonalternant graphene allotropes, phagraphene and tetra-penta-hepta(TPH)-graphene, have been obtained by dehydrogenative C-C coupling of 2,6-polyazulene chains. These chains were formed in a preceding reaction step via on-surface Ullmann coupling of 2,6-dibromoazulene. Low-temperature scanning probe microscopies with CO-functionalized tips and density functional theory calculations have been used to elucidate their structural properties. The proposed synthesis of nonalternant carbon nanoribbons from the fusion of synthetic line-defects may pave the way for large-area preparation of novel 2D carbon allotropes.

Oxygen Functionalization of Hexagonal Boron Nitride on Ni(111).

The interaction of single-layer hexagonal boron nitride (h-BN) on Ni(111) with molecular oxygen from a supersonic molecular beam led to a covalently bonded molecular oxygen species, which was identified as being between a superoxide and a peroxide. This is a rare example of an activated adsorption process leading to a molecular adsorbate. The amount of oxygen functionalization depended on the kinetic energy of the molecular beam. For a kinetic energy of 0.7 eV, an oxygen coverage of 0.4 ML was found. Near-edge X-ray adsorption fine structure (NEXAFS) spectroscopy revealed a stronger bond of h-BN to the Ni(111) substrate in the presence of the covalently bound oxygen species. Oxygen adsorption also led to a shift of the valence bands to lower binding energies. Subsequent temperature-programmed X-ray photoelectron spectroscopy revealed that the oxygen boron bonds are stable up to approximately 580 K, when desorption, and simultaneously, etching of h-BN set in. The experimental results were substantiated by density functional theory calculations, which provided insight to the adsorption geometry, the adsorption energy and the reaction pathway.

Precise Monoselective Aromatic C-H Bond Activation by Chemisorption of Meta-Aryne on a Metal Surface.

Aromatic C-H bond activation has attracted much attention due to its versatile applications in the synthesis of aryl-containing chemicals. The major challenge lies in the minimization of the activation barrier and maximization of the regioselectivity. Here, we report the highly selective activation of the central aromatic C-H bond in meta-aryne species anchored to a copper surface, which catalyzes the C-H bond dissociation. Two prototype molecules, i.e., 4',6'-dibromo- meta-terphenyl and 3',5'-dibromo- ortho-terphenyl, have been employed to perform C-C coupling reactions on Cu(111). The chemical structures of the resulting products have been clarified by a combination of scanning tunneling microscopy and noncontact atomic force microscopy. Both methods demonstrate a remarkable weakening of the targeted C-H bond. Density functional theory calculations reveal that this efficient C-H activation stems from the extraordinary chemisorption of the meta-aryne on the Cu(111) surface, resulting in the close proximity of the targeted C-H group to the Cu(111) surface and the absence of planarity of the phenyl ring. These effects lead to a lowering of the C-H dissociation barrier from 1.80 to 1.12 eV, in agreement with the experimental data.

Metal versus Ligand Reduction in Ln3+ Complexes of a Mesitylene-Anchored Tris(Aryloxide) Ligand.

The synthesis of 4f n Ln3+ complexes of the tris(aryloxide) mesitylene ligand, ((Ad,MeArO)3mes)3-, with Ln = La, Ce, Pr, Sm, and Yb, and their reduction with potassium have revealed that this ligand system can be redox active with some metals. Protonolysis of [Ln(N(SiMe3)2)3] (Ln = La, Ce, Pr, Sm, Yb) with the tris(phenol) (Ad,MeArOH)3mes yielded the Ln3+ complexes [((Ad,MeArO)3mes)Ln] (Ln = La, Ce, Pr, Sm, Yb), 1-Ln. Single electron reduction of each 4f n complex, 1-Ln, using potassium yielded the reduced products, [K(2.2.2-cryptand)][((Ad,MeArO)3mes)Ln] (Ln = La, Ce, Pr, Sm, Yb), 2-Ln. The Sm and Yb complexes have properties consistent with the presence of Ln2+ ions with traditional 4f n+1 electron configurations. However, the La, Ce, and Pr complexes appear to formally contain Ln3+ ions and ((Ad,MeArO)3mes)4- ligands. Structural comparisons of the [((Ad,MeArO)3mes)Ln] and [((Ad,MeOAr)3mes)Ln]1- complexes along with UV-vis absorption and EPR spectroscopy as well as density functional theory calculations support these ground state assignments.

Predicting core level binding energies shifts: Suitability of the projector augmented wave approach as implemented in VASP.

Here, we assess the accuracy of various approaches implemented in Vienna ab initio simulation package code to estimate core-level binding energy shifts (ΔBEs) using a projector augmented wave method to treat core electrons. The performance of the Perdew-Burke-Ernzerhof (PBE) and the Tao-Perdew-Staroverov-Scuseria (TPSS) exchange-correlation density functionals is examined on a dataset of 68 molecules containing B→F atoms in diverse chemical environments, accounting for 185 different 1s core level binding energy shifts, for which both experimental gas-phase X-ray photoemission (XPS) data and accurate all electron ΔBEs are available. Four procedures to calculate core-level shifts are investigated. Janak-Slater transition state approach yields mean absolute errors of 0.37 (0.21) eV at PBE (TPSS) level, similar to highly accurate all electron ΔSCF approaches using same functionals, and close to XPS experimental accuracy of 0.1 eV. The study supports the use of these procedures to assign ΔBEs of molecular moieties on material surfaces of interest in surface science, nanotechnology, and heterogeneous catalysis. © 2017 Wiley Periodicals, Inc.

On the critical role of the substrate: the adsorption behaviour of tetrabenzoporphyrins on different metal surfaces.

The adsorption behaviour of 2H-5,10,15,20-tetraphenyltetrabenzoporphyrin (2HTPTBP) on different metal surfaces, i.e., Ag(111), Cu(111), Cu(110), and Cu(110)-(2 × 1)O was investigated by scanning tunnelling microscopy at room temperature. The adsorption of 2HTPTBP on Ag(111) leads to the formation of a well-ordered two-dimensional (2D) island structure due to the mutual stabilization through the intermolecular π-π stacking and T-type-like interactions of phenyl and benzene substituents of neighboring molecules. For 2HTPTBP on Cu(111), the formed 2D supramolecular structures exhibit a coverage-dependent behaviour, which can be understood from the interplay of molecule-substrate and molecule-molecule interactions. In contrast, on Cu(110) the 2HTPTBP molecules form dispersed one-dimensional (1D) molecular chains along the [11[combining macron]0] direction of the substrate due to relatively strong attractive molecule-substrate interactions. Furthermore, we demonstrate that the reconstruction of the Cu(110) surface by oxygen atoms yields a change in dimensionality of the resulting nanostructures from 1D on Cu(110) to 2D on (2 × 1) oxygen-reconstructed Cu(110), induced by a decreased molecule-substrate interaction combined with attractive molecule-molecule interactions. This comprehensive study on these prototypical systems enables us to deepen the understanding of the particular role of the substrate concerning the adsorption behavior of organic molecules on metal surfaces and thus to tweak the ordering in functional molecular architectures.

Matrix effects in the C 1s photoabsorption spectra of condensed naphthalene.

High-resolution C 1s near-edge x-ray absorption fine structure (NEXAFS) spectra of naphthalene are investigated. By comparing the spectral signatures of condensed naphthalene molecules with those of naphthalene in the gas phase, we are able to unambiguously identify spectral features which are affected by the intermolecular interactions in the condensed phase. With the help of calculations using time-dependent density-functional theory and the second-order algebraic-diagrammatic construction scheme for the polarization propagator, resonances in the relevant energy range can be assigned to valence and Rydberg-like excitations. Thus, we obtain a more detailed identification of NEXAFS resonances beyond the present literature.

Self-assembly and coverage dependent thermally induced conformational changes of Ni(II)-meso-tetrakis (4-tert-butylphenyl) benzoporphyrin on Cu(111).

A systematic scanning tunnelling microscopy investigation of the self-assembly and of thermally induced conformational changes of Ni(II)-meso-tetrakis (4-tert-butylphenyl) benzoporphyrin (Ni-TTBPBP) on Cu(111) is presented. At room temperature, Ni-TTBPBPs diffuse on the surface and self-assemble into ordered islands with well-defined registry to the substrate, with two different azimuthal orientations. The formation of the characteristic supramolecular structure is attributed to van der Waals interactions between the tert-butyl groups. Upon moderate heating, the intramolecular conformation changes irreversibly due to a dehydrogenative intramolecular aryl-aryl coupling reaction. This reaction is coverage dependent, with a lower rate at higher initial coverage; this behaviour is attributed to a stabilization of Ni-TTBPBP in the ordered islands at higher coverage.

On the energetics of conformational switching of molecules at and close to room temperature.

We observe and induce conformational switching of individual molecules via scanning tunneling microscopy (STM) at and close to room temperature. 2H-5,10,15,20-Tetrakis-(3,5-di-tert-butyl)-phenylporphyrin adsorbed on Cu(111) forms a peculiar supramolecular ordered phase in which the molecules arrange in alternating rows, with two distinct appearances in STM which are assigned to concave and convex intramolecular conformations. Around room temperature, frequent bidirectional conformational switching of individual molecules from concave to convex and vice versa is observed. From the temperature dependence, detailed insights into the energy barriers and entropic contributions of the switching processes are deduced. At 200 K, controlled STM tip-induced unidirectional switching is possible, yielding an information storage density of 4.9 × 10(13) bit/inch(2). With this contribution we demonstrate that controlled switching of individual molecules at comparably high temperatures is possible and that entropic effects can be a decisive factor in potential molecular devices at these temperatures.

High resolution scanning tunneling microscopy of a 1D coordination polymer with imidazole-based N,N,O ligands on HOPG.

Novel κ(3) -N,N,O ligands tend to form 1D coordination polymer strands. Deposition of 1D structures on highly oriented pyrolytic graphite (HOPG) was achieved from diluted solutions and polymer strands have been studied on HOPG by AFM/STM. Single strands were mapped by STM and their electronic properties were subsequently characterized by current imaging tunneling spectroscopy (CITS). Periodic density functional calculations simulating a polymer strand deposited on a HOPG surface are in agreement with the zig-zag structure indicated by experimental findings. Both the observed periodicity and the Zn-Zn distances can be reproduced in the simulations. Van der Waals interactions were found to play a major role for the geometry of the isolated polymer strand, for the adsorption geometry on HOPG, as well as for the adsorption energy.

Hydrogen storage on metal oxide model clusters using density-functional methods and reliable van der Waals corrections.

We investigate the capability of low-coordinated sites on small model clusters to act as active centers for hydrogen storage. A set of small magic clusters with the formula (XY)6 (X = Mg, Ba, Be, Zn, Cd, Na, Li, B and Y = O, Se, S, F, I, N) and a "drumlike" hexagonal shape showing a low coordination number of three was screened. Oxide clusters turned out to be the most promising candidates for hydrogen storage. For these ionic compounds we explored the suitability of different van der Waals (vdW) corrections to density-functional calculations by comparing the respective H2 physisorption profile to highly accurate CCSD(T) (Coupled Cluster Singles Doubles with perturbative Triples) calculations. The Grimme D3 vdW correction in combination with the Perdew-Burke-Ernzerhof exchange-correlation functional was found to be the best approach compared to CCSD(T) hydrogen physisorption profiles and is, therefore, suited to study these and other light metal oxide systems. H2 adsorption on sites of oxide model clusters is found to meet the adsorption energy criteria for H2 storage, with bond strengths ranging from 0.15 to 0.21 eV. Energy profiles and estimates of kinetic constants for the H2 splitting reaction reveal that H2 is likely to be adsorbed molecularly on sites of (MgO)6, (BaO)6, and (BeO)6 clusters, suggesting a rapid H2 uptake/release at operating temperatures and moderate pressures. The small mass of beryllium and magnesium makes such systems appealing for meeting the gravimetric criterion for H2 storage.

Synthesis and characterization of a uranium(II) monoarene complex supported by δ backbonding.

The low-temperature (<-35 °C) reduction of the trivalent uranium monoarene complex [{((Ad,Me) ArO)3 mes}U] (1), with potassium spheres in the presence of a slight excess of 2.2.2-cryptand, affords the quantitative conversion of 1 into the uranium(II) monoarene complex [K(2.2.2-crypt)][(((Ad,Me) ArO)3 mes)U] (1-K). The molecular and electronic structure of 1-K was established experimentally by single-crystal X-ray diffraction, variable-temperature (1) H NMR and X-band EPR spectroscopy, solution-state and solid-state magnetism studies, and optical absorption spectroscopy. The electronic structure of the complex was further investigated by DFT calculations. The complete body of evidence confirms that 1-K is a uranium(II) monoarene complex with a 5f (4) electronic configuration supported by δ backbonding and that the nearly reversible, room-temperature reduction observed for 1 at -2.495 V vs. Fc/Fc(+) is principally metal-centered.

Dehydrogenation mechanism of liquid organic hydrogen carriers: dodecahydro-N-ethylcarbazole on Pd(111).

Dodecahydro-N-ethylcarbazole (H12-NEC) has been proposed as a potential liquid organic hydrogen carrier (LOHC) for chemical energy storage, as it combines both favourable physicochemical and thermodynamic properties. The design of optimised dehydrogenation catalysts for LOHC technology requires a detailed understanding of the reaction pathways and the microkinetics. Here, we investigate the dehydrogenation mechanism of H12-NEC on Pd(111) by using a surface-science approach under ultrahigh vacuum conditions. By combining infrared reflection-absorption spectroscopy, density functional theory calculations and X-ray photoelectron spectroscopy, surface intermediates and their stability are identified. We show that H12-NEC adsorbs molecularly up to 173 K. Above this temperature (223 K), activation of C-H bonds is observed within the five-membered ring. Rapid dehydrogenation occurs to octahydro-N-ethylcarbazole (H8-NEC), which is identified as a stable surface intermediate at 223 K. Above 273 K, further dehydrogenation of H8-NEC proceeds within the six-membered rings. Starting from clean Pd(111), C-N bond scission, an undesired side reaction, is observed above 350 K. By complementing surface spectroscopy, we present a temperature-programmed molecular beam experiment, which permits direct observation of dehydrogenation products in the gas phase during continuous dosing of the LOHC. We identify H8-NEC as the main product desorbing from Pd(111). The onset temperature for H8-NEC desorption is 330 K, the maximum reaction rate is reached around 550 K. The fact that preferential desorption of H8-NEC is observed even above the temperature threshold for H8-NEC dehydrogenation on the clean surface is attributed to the presence of surface dehydrogenation and decomposition products during continuous reactant exposure.

Mechanisms of the water-gas shift reaction catalyzed by ruthenium pentacarbonyl: a density functional theory study.

The mechanism of the water-gas shift reaction catalyzed by Ru(CO)5 is analyzed using density functional methods in solution within the conductor-like screening model. Four different mechanistic pathways have been considered. It turned out that the incorporation of solvent effects is very important for a reasonable comparison among the mechanistic alternatives. The explicit inclusion of a water solvent molecule significantly changes the barriers of those steps which involve proton transfer in the transition state. The corresponding barriers are either lowered or increased, depending on the structure of the corresponding cyclic transition states. The results show that protolysis steps become competitive due to solution effects. The formation of formic acid as an intermediate in another, alternative pathway is also found to be competitive.

Uranium(III) complexes with bulky aryloxide ligands featuring metal-arene interactions and their reactivity toward nitrous oxide.

We report the synthesis and use of an easy-to-prepare, bulky, and robust aryloxide ligand starting from inexpensive precursor materials. Based on this aryloxide ligand, two reactive, coordinatively unsaturated U(III) complexes were prepared that are masked by a metal-arene interaction via δ-backbonding. Depending on solvent and uranium starting material, both a tetrahydrofuran (THF)-bound and Lewis-base-free U(III) precursor can easily be prepared on the multigram scale. The reaction of these trivalent uranium species with nitrous oxide, N2O, was studied and an X-ray diffraction (XRD) study on single crystals of the product revealed the formation of a five-coordinate U(V) oxo complex with two different molecular geometries, namely, square pyramidal and trigonal bipyramidal.

Surface-assisted organic synthesis of hyperbenzene nanotroughs.

A hexagonal macrocycle consisting of 18 phenylene units (hyperbenzene) was synthesized on a Cu(111) surface in ultrahigh vacuum by Ullmann coupling of six 4,4''-dibromo-m-terphenyl molecules. The large diameter of 21.3 Šand the ability to assemble in arrays makes hyperbenzene an interesting candidate for a nanotrough that could enclose metallic, semiconducting, or molecular quantum dots.

Observation of the inverse trans influence (ITI) in a uranium(V) imide coordination complex: an experimental study and theoretical evaluation.

An inverse trans influence has been observed in a high-valent U(V) imide complex, [(((Ad)ArO)(3)N)U(NMes)]. A thorough theoretical evaluation has been employed in order to corroborate the ITI in this unusual complex. Computations on the target complex, [(((Ad)ArO)(3)N)U(NMes)], and the model complexes [(((Me)ArO)(3)N)U(NMes)] and [(NMe(3))(OMe(2))(OMe)(3)U(NPh)] are discussed along with synthetic details and supporting spectroscopic data. Additionally, the syntheses and full characterization data of the related U(V) trimethylsilylimide complex [(((Ad)ArO)(3)N)U(NTMS)] and U(IV) azide complex [(((Ad)ArO)(3)N)U(N(3))] are also presented for comparison.

Preparation and characterization of ultrathin [Ru(CO)3Cl2]2 and [BMIM][Tf2N] films on Al2O3/NiAl(110) under UHV conditions.

Towards a better understanding of the interface chemistry of ionic liquid (IL) thin film catalytic systems we have applied a rigorous surface science model approach. For the first time, a model homogeneous catalyst has been prepared under ultrahigh vacuum conditions. The catalyst, di-µ-chlorobis(chlorotricarbonylruthenium) [Ru(CO)(3)Cl(2)](2), and the solvent, the IL 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][Tf(2)N], have been deposited by physical vapor deposition onto an alumina model support [Al(2)O(3)/NiAl(110)]. First, the interaction between thin films of [Ru(CO)(3)Cl(2)](2) and the support is investigated. Then, the ruthenium complex is co-deposited with the IL and the influence of the solvent on the catalyst is discussed. D(2)O, which is a model reactant, is further added. Growth, surface interactions, and mutual interactions in the thin films are studied with IRAS in combination with density functional (DFT) calculations. At 105 K, molecular adsorption of [Ru(CO)(3)Cl(2)](2) is observed on Al(2)O(3)/NiAl(110). The IRAS spectra of the binary [Ru(CO)(3)Cl(2)](2) + [BMIM][Tf(2)N] and ternary [Ru(CO)(3)Cl(2)](2) + [BMIM][Tf(2)N] + D(2)O show every characteristic band of the individual components. Above 223 K, partial decomposition of the ruthenium complex leads to species of molecular nature attributed to Ru(CO) and Ru(CO)(2) surface species. Formation of metallic ruthenium clusters occurs above 300 K and the model catalyst decomposes further at higher temperatures. Neither the presence of the IL nor of D(2)O prevents this partial decomposition of [Ru(CO)(3)Cl(2)](2) on alumina.

The surface trans effect: influence of axial ligands on the surface chemical bonds of adsorbed metalloporphyrins.

The chemical bond between an adsorbed, laterally coordinated metal ion and a metal surface is affected by an additional axial ligand on the metal ion. This surface analogon of the trans effect was studied in detail using monolayers of various M(II)-tetraphenylporphyrins (MTTPs, M = Fe, Co, Zn) and their nitrosyl complexes on a Ag(111) surface. X-ray photoelectron spectroscopy (XPS) shows that the oxidation state of the Fe and Co (but not Zn) ions in the MTPP monolayers is reduced because of the interaction with the substrate. This partial reduction is accompanied by the appearance of new valence states in the UV photoelectron and scanning tunneling spectra (UPS and STS), revealing the covalent character of the ion-substrate bond. Subsequent coordination of nitric oxide (NO) to the metal ions (Fe, Co) reverses these surface-induced effects, resulting in an increase of the oxidation states and the disappearance of the new valence states. Removal of the NO ligands by thermal desorption restores the original spectroscopic features, indicating that the described processes are fully reversible. The NO coordination also changes the spin state and thus the magnetic properties of the metal ions. Density-functional theory (DFT) calculations on model systems provide structural and energetic data on the adsorbed molecules and the surface chemical bond. The calculations reveal that competition effects, similar to the trans effect, play a central role and lead to a mutual interference of the two axial ligands, NO and Ag, and their bonds to the metal center. These findings have important implications for sensor technology and catalysis using supported planar metal complexes, in which the activity of the metal center is sensitively influenced by the substrate.