Structure of the Dnmt1 Reader Module Complexed with a Unique Two-Mono-Ubiquitin Mark on Histone H3 Reveals the Basis for DNA Methylation Maintenance.

The proper location and timing of Dnmt1 activation are essential for DNA methylation maintenance. We demonstrate here that Dnmt1 utilizes two-mono-ubiquitylated histone H3 as a unique ubiquitin mark for its recruitment to and activation at DNA methylation sites. The crystal structure of the replication foci targeting sequence (RFTS) of Dnmt1 in complex with H3-K18Ub/23Ub reveals striking differences to the known ubiquitin-recognition structures. The two ubiquitins are simultaneously bound to the RFTS with a combination of canonical hydrophobic and atypical hydrophilic interactions. The C-lobe of RFTS, together with the K23Ub surface, also recognizes the N-terminal tail of H3. The binding of H3-K18Ub/23Ub results in spatial rearrangement of two lobes in the RFTS, suggesting the opening of its active site. Actually, incubation of Dnmt1 with H3-K18Ub/23Ub increases its catalytic activity in vitro. Our results therefore shed light on the essential role of a unique ubiquitin-binding module in DNA methylation maintenance.

Differentiation of isobaric cross-linked peptides prepared via maleimide chemistry using MALDI-MS and MS/MS.

RATIONALE: The thiosuccinimide linker is widely used in the synthesis of bioconjugates. However, it is susceptible to hydrolysis and is transformed into its hydrolyzed and/or the isobaric thiazine forms, the latter of which is a fairly common product in a conjugate that contains a cysteinyl peptide. Matrix-assisted laser desorption/ionization-mass spectrometry (MALDI-MS) and matrix-assisted laser desorption/ionization-tandem mass spectrometry (MALDI-MS/MS) are useful for differentiating these isobaric species. METHODS: Four cross-linked peptides with thiosuccinimide linkers were synthesized. Analogs with linkers that were transformed into thiazine and/or the hydrolyzed thiosuccinimide linkers were then synthesized by incubating the samples at neutral or basic pH. All the cross-linked peptides were purified using RP-HPLC (reversed-phase high-performance liquid chromatography) and differentiated using MALDI-MS, MALDI-MS/MS, and ultraviolet photodissociation. RESULTS: A cysteinyl peptide-containing conjugate, the thiosuccinimide form, was largely transformed into the hydrolyzed or thiazine forms after incubation at neutral or basic pH. MALDI-MS allowed the three forms to be differentiated: the thiosuccinimide and its hydrolysis product yielded two constituent peptides after reductive cleavage between the Cys and succinimide moieties; no fragment ions were produced from the thiazine form. In addition, MALDI-MS/MS of the thiosuccinimide form yielded two pairs of complementary fragment ions via 1,4-elimination: Cys-SH and maleimide, and dehydro-alanine and thiosuccinimide, which are different from those produced via reductive cleavage in MALDI-MS. The thiazine form yielded fragment ions resulting from the cleavage of the newly formed amide bond in the linker that resulted from thiazine formation. CONCLUSIONS: The thiosuccinimide (but not thiazine) form of the cross-linked peptide yielded individual constituent peptides using MALDI-MS and MALDI-MS/MS, showing specific 1,4-elimination for the thiosuccinimide form and cleavage at the newly formed peptide bond via transcyclization for the thiazine form.

A hydrolyzed N-propionylthiosuccinimide linker is cleaved by metastable fragmentation, increasing reliability of conjugation site identification in conjugate vaccines.

RATIONALE: Conjugation sites are a quality attribute of conjugate vaccines. Proteolysis of bioconjugates synthesized by maleimide-thiol chemistry generates type 2 peptides with a hydrolyzed thiosuccinimide linker containing information on the conjugation sites. A mass spectrometry (MS)-cleavable linker could make the identification of conjugation sites by MS more reliable. METHODS: Four synthetic type 2 peptides with a hydrolyzed thiosuccinimide linker were analyzed by matrix-assisted laser desorption ionization (MALDI) MS/MS with and without collision gas. These peptides were also partially labeled with 18O in the linker to confirm the proposed fragmentation mechanism. A conjugate vaccine with the hydrolyzed thiosuccinimide linker was reduced and S-alkylated, digested with trypsin and analyzed by liquid chromatography-MS/MS using collision-induced dissociation (CID) and higher-energy collisional dissociation (HCD) fragmentation methods at a normalized collision energy of 30. RESULTS: A metastable fragmentation preferentially cleaves the newly formed pseudopeptide bond within the hydrolyzed thiosuccinimide linker of type 2 peptides to yield P + 71 and C + 98 ions. These ions make the assignment of conjugation sites more reliable. Partial 18O-labeling and MS/MS analysis confirmed the proposed structures. CID produces these ions as the two most intense signals more favorably than HCD. The latter also yields these ions, guarantees better sequence coverage and promotes other fragmentations in the linker. CONCLUSIONS: Hydrolyzed thiosuccinimide linker is cleavable in MALDI and electrospray ionization MS/MS analysis by a gas-phase metastable fragmentation. The resulting fragment ions (P + 71 and C + 98) make the identification of conjugation sites more reliable. These results could be extended to self-hydrolyzing maleimides, which efficiently stabilize the thiosuccinimide linker upon hydrolysis, in antibody-drug conjugates.

The dipicolylamino group as an efficient leaving group for amide bond formation via hexafluoroisopropyl ester.

Peptide dipicolylamide was prepared by the solid-phase method. The amide was activated by Cu(II) ions in hexafluoroisopropanol and converted to the corresponding active ester. It was condensed with the C-terminal segment to realize segment coupling. The method was successfully applied to the synthesis of an atrial natriuretic peptide and RNase T1.

Unexpected diselenide metathesis in selenocysteine-substituted biologically active peptides.

Substitution of disulfide bonds with a diselenide bonds in peptides and proteins is an often-used strategy to increase the stability of naturally occurring peptides and proteins. In this paper, diselenide metathesis between model diselenide dimer peptides, as well as that in diselenide(s)-substituted biologically active peptides, were analyzed. Surprisingly, depending on the tertiary structure of the peptides, we observed that the metathesis reaction occurs under physiological conditions even in the absence of reducing agents, light and heating.

Chemical synthesis of per-selenocysteine human epidermal growth factor.

Human seleno-epidermal growth factor (seleno-EGF), a 53-residue peptide where all six cysteine residues of the parent human EGF sequence were replaced by selenocysteines, was synthesized and the oxidative folding of a polypeptide containing three diselenide bonds was compared to that of the parent cysteine peptide. The crude high performance liquid chromatography (HPLC) profiles clearly showed that both the native EGF and its selenocysteine-analogue fold smoothly, yielding a single sharp peak, proving that even in the case of three disulfide-bonded polypeptides the disulfide-to-diselenide bond substitution is highly isomorphous, as confirmed by conformational circular dichroism measurements and particularly by the biological assays.

Lipid chain-driven interaction of a lipidated Src-family kinase Lyn with the bilayer membrane.

N-Myristoylation is a process of ubiquitous protein modification, which promotes the interaction of lipidated proteins on cell surfaces, in conjunction with reversible S-palmitoylation. We report the cooperative lipid-lipid interaction of two acyl chains of proteins, which increases the protein-membrane interaction and facilitates selective targeting of membranes containing anionic lipids. Lyn is a member of the Src family kinases distributed on the membrane surface by N-myristoyl and neighbouring S-palmitoyl chain anchors at the unique N-terminus domain. We prepared N-terminal short segments of lipidated Lyn to investigate the behaviour of each acyl chain in the lipid composition-dependent membrane interaction by solid-state nuclear magnetic resonance (NMR) analysis. Solid-state 31P-NMR studies revealed that S-palmitoylation of N-myristoylated Lyn peptides increased the interaction between peptides and phospholipid head groups, particularly with the anionic phosphatidylserine-containing bilayers. The solid-state 2H-NMR of Lyn peptides with a perdeutero N-myristoyl chain indicated an increase (0.6-0.8 Å) in the extent of the N-myristoyl chain in the presence of nearby S-palmitoyl chains, probably through the interaction via the acyl chains. The cooperative hydrocarbon chain interaction of the two acyl chains of Lyn increased membrane binding by extending the hydrocarbon chains deeper into the membrane interior, thereby promoting the peptide-membrane surface interaction between the cationic peptide side chains and the anionic lipid head groups. This lipid-driven mechanism by S-palmitoylation promotes the partition of the lipidated proteins to the cytoplasmic surface of the cell membranes and may be involved in recruiting Lyn at the signalling domains rich in anionic lipids.

Relative configuration of Cys-Pro ester peptides in thioester formation.

A peptide containing a cysteinyl prolyl ester (CPE) moiety at the C-terminus (CPE peptide) was transformed into a diketopiperazine (DKP) thioester via an intramolecular N-S acyl shift reaction and was then used for peptide ligation. The difference in reactivity between the CPE peptide stereoisomers was examined. In reactions of the CPE peptides that contained L-Cys-L-Pro or D-Cys-D-Pro, the desired DKP thioester was formed at the preceding amino acid residue. On the other hand, in reactions of the CPE peptides that contained D-Cys-L-Pro or L-Cys-D-Pro, a thiolactone was formed at the C-terminal prolyl ester, and the ligation occurred at the C-terminal Pro residue. Using this reaction, it was possible to efficiently prepare a cyclic peptide.

Copper stabilizes antiparallel ß-sheet fibrils of the amyloid ß40 (Aß40)-Iowa variant.

Cerebral amyloid angiopathy (CAA) is a vascular disorder that primarily involves deposition of the 40-residue-long ß-amyloid peptide (Aß40) in and along small blood vessels of the brain. CAA is often associated with Alzheimer's disease (AD), which is characterized by amyloid plaques in the brain parenchyma enriched in the Aß42 peptide. Several recent studies have suggested a structural origin that underlies the differences between the vascular amyloid deposits in CAA and the parenchymal plaques in AD. We previously have found that amyloid fibrils in vascular amyloid contain antiparallel ß-sheet, whereas previous studies by other researchers have reported parallel ß-sheet in fibrils from parenchymal amyloid. Using X-ray fluorescence microscopy, here we found that copper strongly co-localizes with vascular amyloid in human sporadic CAA and familial Iowa-type CAA brains compared with control brain blood vessels lacking amyloid deposits. We show that binding of Cu(II) ions to antiparallel fibrils can block the conversion of these fibrils to the more stable parallel, in-register conformation and enhances their ability to serve as templates for seeded growth. These results provide an explanation for how thermodynamically less stable antiparallel fibrils may form amyloid in or on cerebral vessels by using Cu(II) as a structural cofactor.

Structural dynamics of the chromo-shadow domain and chromodomain of HP1 bound to histone H3K9 methylated peptide, as measured by site-directed spin-labeling EPR spectroscopy.

The structural dynamics of the chromo-shadow domain (CSD) and chromodomain (CD) of human HP1 proteins essential for heterochromatin formation were investigated at the nanosecond and nanometer scales by site-directed spin labeling electron paramagnetic resonance and pulsed double resonance spectroscopy. Distance measurements showed that the spin-labeled CSD of human HP1α and HP1γ tightly dimerizes. Unlike CD-CD interaction observed in fission yeast HP1 in an inactivated state (Canzio et al., 2013), the two CDs of HP1α and HP1γ were spatially separated from each other, dynamically mobile, and ready for a Brownian search for H3K9-tri-methyl(me3) on histones. Complex formation of the CD with H3K9me3 slowed dynamics of the domain due to a decreased diffusion constant. CSD mobility was significantly (∼1.3-fold) lower in full-length HP1α than in HP1γ, suggesting that the immobilized conformation of human HP1α shows an auto-inactivated state. Differential properties of HP1α and HP1γ to form the inactive conformation could be relevant to its physiological role in the heterochromatin formation in a cell.

Enhanced processivity of Dnmt1 by monoubiquitinated histone H3.

DNA methylation controls gene expression, and once established, DNA methylation patterns are faithfully copied during DNA replication by the maintenance DNA methyltransferase Dnmt1. In vivo, Dnmt1 interacts with Uhrf1, which recognizes hemimethylated CpGs. Recently, we reported that Uhrf1-catalyzed K18- and K23-ubiquitinated histone H3 binds to the N-terminal region (the replication focus targeting sequence, RFTS) of Dnmt1 to stimulate its methyltransferase activity. However, it is not yet fully understood how ubiquitinated histone H3 stimulates Dnmt1 activity. Here, we show that monoubiquitinated histone H3 stimulates Dnmt1 activity toward DNA with multiple hemimethylated CpGs but not toward DNA with only a single hemimethylated CpG, suggesting an influence of ubiquitination on the processivity of Dnmt1. The Dnmt1 activity stimulated by monoubiquitinated histone H3 was additively enhanced by the Uhrf1 SRA domain, which also binds to RFTS. Thus, Dnmt1 activity is regulated by catalysis (ubiquitination)-dependent and -independent functions of Uhrf1.

Total Synthesis and Structural Characterization of Caveolin-1.

Caveolin-1, which is an essential protein for caveola formation, was chemically synthesized. It is composed of 177 amino acid residues, is triply palmitoylated at the C-terminal region, and is inserted into the lipid bilayer to form a V-shaped structure in the middle of the polypeptide chain. The entire sequence was divided into five peptide segments, each of which was synthesized by the solid-phase method. To improve the solubility of the C-terminal region, O-acyl isopeptide structures were incorporated. After ligation by the thioester method and the introduction of the palmitoyl groups, all the protecting groups were removed and the isopeptide structures were converted into the native peptide bond. Finally, the obtained polypeptide was successfully inserted into bicelles, thus showing the success of the synthesis.

One Step Synthesis of Fmoc-Aminoacyl-N-alkylcysteine via the Ugi Four-Component Condensation Reaction.

A prompt preparation method of the Fmoc-aminoacyl-N-alkylcysteine dipeptide by an Ugi four-component condensation reaction is described. Through a reaction with a commercially available Fmoc-amino acid, an amine, an isocyanide, and a mercaptoacetaldehyde derivative, one step synthesis of dipeptides containing 20 kinds of natural amino acid residues was achieved, which avoided the problematic N-alkylation of S-tritylcysteine and its coupling reaction. The dipeptide was applied to the Fmoc-solid-phase peptide synthesis, and peptide thioesters were successfully obtained in high efficiency via N-alkylcysteine (NAC)-assisted thioesterification.

Chemical synthesis of the ubiquitinated form of histone H3 and its effect on DNA methyltransferase 1.

Posttranslational modifications of histone proteins, which form nucleosome cores, play an important role in gene regulation. Ubiquitination is one such modification. We previously reported on the synthesis of ubiquitinated histone H3 with an isopeptide mimetic structure. In this report, we describe the preparation of ubiquitinated histone H3 peptides with a native isopeptide structure, which showed a slightly weaker effect on the enzymatic activity of DNA methyltransferase 1 than the previous ubiquitinated H3 peptide analogs. These findings show that a native structure is important for determining the mechanism of the function, although ubiquitinated H3 peptide analogs can mimic the role of the original ubiquitinated H3. We also report on the successful preparation of the ubiquitinated full length histone H3.

Heat-Induced Aggregation of Hen Ovalbumin Suggests a Key Factor Responsible for Serpin Polymerization.

Although ovalbumin (OVA), a main component of hen egg white and a non-inhibitory serpin superfamily protein, has been reported to form fibrillar aggregates, its relationship with amyloid fibrils associated with various degenerative diseases is unclear. We studied the heat-induced aggregation of intact OVA using an amyloid-specific thioflavin T assay with a fluorometer or direct imaging with a light-emitting diode lamp and several physicochemical approaches, and the results confirmed that intact OVA forms aggregates with a small part of amyloid cores and dominantly amorphous aggregates. We isolated the amyloidogenic core peptide by proteolysis with trypsin. The isolated 23-residue peptide, pOVA, with marked amyloidogenicity, corresponded to one (ß-strand 3A) of the key regions involved in serpin latency transition and domain-swap polymerization leading to serpinopathies. Although the strong amyloidogenicity of pOVA was suppressed in a mixture of tryptic digests, it was observed under acidic conditions in the presence of various salts, with which pOVA has a positive charge. Cytotoxicity measurements suggested that, although heat-treated OVA aggregates exhibited the strongest toxicity, it was attributed to a general property of amorphous aggregates rather than amyloid toxicity. Predictions indicated that the high amyloidogenicity of the ß-strand 3A region is common to various serpins. This suggests that the high amyloidogenicity of ß-strand 3A that is important for serpin latency transition and domain-swap polymerization is retained in OVA and constitutes ß-spine amyloid cores upon heat aggregation.

Revalidation of recombinant aequorin as a light emission standard: Estimation of specific activity of Gaussia luciferase.

To validate the use of recombinant aequorin (reAequorin) as a light emission standard, the protein concentrations of highly purified reAequorin were determined by amino acid composition analysis, and the presence of active reAequorin was confirmed by the ratio of absorbance peak at 460 nm to that at 280 nm. The high correlation of the luminescence intensity with the protein concentration showed that reAequorin could be used for a light emission standard to study the luminescence properties of luciferases and to evaluate the detection sensitivity of luminometers. The specific activity of Gaussia luciferase with Imax was 7.5-fold higher than that of reAequorin and was calculated to be 3.8 × 1016 quanta/mg protein.

Sialyl Tn Unit with TFA-Labile Protection Realizes Efficient Synthesis of Sialyl Glycoprotein.

Amino acids bearing 4-methylbenzyl (MBn) and 4-methoxybenzyl (MPM)-protected sialic acid were synthesized and used for the 9-fluorenylmethoxycarbonyl (Fmoc) solid-phase synthesis of a glycopeptide. The α-sialyl linkage of the MBn-protected unit was partially cleaved under the final deprotection by trifluoroacetic acid (TFA). In addition, the removal of several MBn groups were incomplete. On the other hand, the MPM-protected unit gave the desired glycopeptide without decomposition of the α-sialyl linkage. Using this unit, peptide thioesters of the tandem repeat unit of MUC1 mucin were synthesized by the N-alkylcysteine (NAC) method and used for the one-pot ligation by the thioester method. As a result, the three tandem repeats of MUC1 carrying sialyl Tn antigens were successfully synthesized.

Enthalpy-driven interactions with sulfated glycosaminoglycans promote cell membrane penetration of arginine peptides.

The first step of cell membrane penetration of arginine peptides is thought to occur via electrostatic interactions between positive charges of arginine residues and negative charges of sulfated glycosaminoglycans (GAGs) on the cell surface. However, the molecular interaction of arginine peptides with GAG still remains unclear. Here, we compared the interactions of several arginine peptides of Tat, R8, and Rev and their analogues with heparin in relation to the cell membrane penetration efficiency. The high-affinity binding of arginine peptides to heparin was shown to be driven by large favorable enthalpy contributions, possibly reflecting multidentate hydrogen bondings of arginine residues with sulfate groups of heparin. Interestingly, the lysine peptides in which all arginine residues are substituted with lysine residues exhibited negligible binding enthalpy despite of their considerable binding to heparin. In CHO-K1 cells, arginine peptides exhibited a great cell-penetrating ability whereas their corresponding lysine peptides did not penetrate into cells. The degree of cell penetration of arginine peptides markedly decreased by the chlorate treatment of cells which prevents the sulfation of GAG chains. Significantly, the cell penetration efficiency of arginine peptides was found to be correlated with the favorable enthalpy of binding to heparin. These results suggest that the enthalpy-driven strong interaction with sulfated GAGs such as heparan sulfate plays a critical role in the efficient cell membrane penetration of arginine peptides.

Development of SAAP3D force field and the application to replica-exchange Monte Carlo simulation for chignolin and C-peptide.

Single amino acid potential (SAAP) would be a prominent factor to determine peptide conformations. To prove this hypothesis, we previously developed SAAP force field for molecular simulation of polypeptides. In this study, the force field was renovated to SAAP3D force field by applying more accurate three-dimensional main-chain parameters, instead of the original two-dimensional ones, for the amino acids having a long side-chain. To demonstrate effectiveness of the SAAP3D force field, replica-exchange Monte Carlo (REMC) simulation was performed for two benchmark short peptides, chignolin (H-GYDPETGTWG-OH) and C-peptide (CHO-AETAAAKFLRAHA-NH2). For chignolin, REMC/SAAP3D simulation correctly produced native ß-turn structures, whose minimal all-atom root-mean-square deviation value measured from the native NMR structure (except for H) was 1.2 Å, at 300 K in implicit water, along with misfolded ß-hairpin structures with unpacked aromatic side chains of Tyr2 and Trp9. Similar results were obtained for chignolin analog [G1Y,G10Y], which folded more tightly to the native ß-turn structure than chignolin did. For C-peptide, on the other hand, the α-helix content was larger than the ß content on average, suggesting a significant helix-forming propensity. When the imidazole side chain of His12 was protonated (i.e., [His12Hip]), the α content became larger. These observations as well as the representative structures obtained by clustering analysis were in reasonable agreement not only with the structures of C-peptide that were determined in this study by NMR in 30% CD3CD in H2O at 298 K but also with the experimental and theoretical behaviors having been reported for protonated C-peptide. Thus, accuracy of the SAAP force field was improved by applying three-dimensional main-chain parameters, supporting prominent importance of SAAP for peptide conformations.

Synthesis of ubiquitylated histone H3 using a thiirane linker for chemical ligation.

Post-translational modifications of histone proteins, which form nucleosome cores, play an important role in gene regulation. Ubiquitin modification is one such modification. We previously reported on the use of a thiirane linker to introduce a 1,2-aminothiol moiety at a cysteine residue for native chemical ligation with peptide thioesters, which permitted isopeptide mimetics to be produced. In this report, we describe the preparation of the ubiquitylated full length histone H3 at the 18 position and the construction of tetranucleosomes with recombinant histones H2A, H2B, H4, and DNA, which are slightly more stable than those that are prepared without ubiquitin modification. Copyright © 2017 European Peptide Society and John Wiley & Sons, Ltd.