Metal Ion and Guest-Mediated Spontaneous Resolution and Solvent-Induced Chiral Symmetry Breaking in Guanine-Based Metallosupramolecular Networks.

Two-dimensional (2D) chirality has been actively studied in view of numerous applications of chiral surfaces such as in chiral resolutions and enantioselective catalysis. Here, we report on the expression and amplification of chirality in hybrid 2D metallosupramolecular networks formed by a nucleobase derivative. Self-assembly of a guanine derivative appended with a pyridyl node was studied at the solution-graphite interface in the presence and absence of coordinating metal ions. In the absence of coordinating metal ions, a monolayer that is representative of a racemic compound was obtained. This system underwent spontaneous resolution upon addition of a coordinating ion and led to the formation of a racemic conglomerate. The spontaneous resolution could also be achieved upon addition of a suitable guest molecule. The mirror symmetry observed in the formation of the metallosupramolecular networks could be broken via the use of an enantiopure solvent, which led to the formation of a globally homochiral surface.

Structural Transformation of Surface-Confined Porphyrin Networks by Addition of Co Atoms.

The self-assembly of a nickel-porphyrin derivative (Ni-DPPyP) containing two pyridyl coordinating sites and two pentyl chains at trans meso positions was studied with scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS) and low energy electron diffraction (LEED) on Au(111). Deposition of Ni-DPPyP onto Au(111) gave rise to a close-packed network for coverages smaller or equal to one monolayer as revealed by STM and LEED. The molecular arrangement of this two-dimensional network is stabilized via hydrogen bonds formed between the pyridyl's nitrogen and hydrogen atoms from the pyrrole groups of neighboring molecules. Subsequent deposition of cobalt atoms onto the close-packed network and post-deposition annealing at 423 K led to the formation of a Co-coordinated hexagonal porous network. As confirmed by XPS measurements, the porous network is stabilized by metal-ligand interactions between one cobalt atom and three pyridyl ligands, each pyridyl ligand coming from a different Ni-DPPyP molecule.

Chemical and Electrochemical Alkali Cations Intercalation/Release in an Ionic Hydrogen Bonded Network.

The chemical oxidation of a hydrogen bonded network, formed upon combination of a hydrogen bond donor dication (12+, a dicationic bis-amidinium organic moiety bearing four propyl chains) with [FeIII/II(CN)6]3-/4- anions has been studied using vibrational spectroscopies. The postsynthetic oxidation of the microcrystalline powder of X213-[FeII(CN)6]2 (X = Na, K, and Cs) by S2O82- into 13-[FeIII(CN)6]2 appeared to be partial for X = K+ and Cs+ and total for Na213-[FeII(CN)6]2. It corresponds to a two-step process involving a second order reaction. The reaction time appears to be dependent on the nature of the alkali cation and is faster for X = Na+. The integrity of the hydrogen bonded network, after oxidation, was also confirmed by powder X-ray diffraction. The flexible nature of the hydrogen bonded network allows alkali cation motions within the network during the oxidation process. In addition, the investigation of the electrochemical behavior evidenced an amorphous deposition on a gold electrode immersed into a solution containing (12+ and [FeIII(CN)6]3-) after 100 cycles. This is the first evidence of an electrochemical ion intercalation for a molecular hydrogen bonded network.

Activation-Dependent Breathing in a Flexible Metal-Organic Framework and the Effects of Repeated Sorption/Desorption Cycling.

A non-interpenetrated metal-organic framework with a paddle-wheel secondary building unit has been activated by direct thermal evacuation, guest exchange with a volatile solvent, and supercritical CO2 drying. Conventional thermal activation yields a mixture of crystalline phases and some amorphous content. Exchange with a volatile solvent prior to vacuum activation produces a pure breathing phase with high sorption capacity, selectivity for CO2 over N2 and CH4 , and substantial hysteresis. Supercritical drying can be used to access a guest-free open phase. Pressure-resolved differential scanning calorimetry was used to confirm and investigate a systematic loss of sorption capacity by the breathing phase as a function of successive cycles of sorption and desorption. A corresponding loss of sample integrity was not detectable by powder X-ray diffraction analysis. This may be an important factor to consider in cases where flexible MOFs are earmarked for industrial applications.

Phosphorus(V) Porphyrin-Based Molecular Turnstiles.

A new cationic molecular turnstile based on a P(V) porphyrin backbone bearing two pyridyl interaction sites, one at the meso position of the porphyrin and the other on the handle connected to the porphyrin through P-O bonds, was designed and synthesized. The dynamic behavior of the turnstile 2, investigated by 1D and 2D 1H NMR techniques, showed that in the absence of an effector, the turnstile is in its open state and undergoes a free rotation of the rotor (the handle) around the stator (the porphyrin backbone). In the presence of an external effector such as Ag+ cation or H+, the turnstile is switched to its closed states 2-Ag+ and 2-H+, respectively. The locking/unlocking process is reversible and may be achieved by precipitation of AgBr upon addition of Et4NBr in the case of the silver-locked turnstile or by addition of Et3N in the case of the proton-locked turnstile.

Welding Molecular Crystals.

Both for fundamental and applied sciences, the design of complex molecular systems in the crystalline phase with strict control of order and periodicity at both microscopic and macroscopic levels is of prime importance for development of new solid-state materials and devices. The design and fabrication of complex crystalline systems as networks of crystals displaying task-specific properties is a step toward smart materials. Here we report on isostructural and almost isometric molecular crystals of different colors, their use for fabrication of core-shell crystals, and their welding by 3D epitaxial growth into networks of crystals as single-crystalline entities. Welding of crystals by self-assembly processes into macroscopic networks of crystals is a powerful strategy for the design of hierarchically organized periodic complex architectures composed of different subdomains displaying targeted characteristics. Crystal welding may be regarded as a first step toward the design of new hierarchically organized complex crystalline systems.

Nanopatterning of Surfaces with Monometallic and Heterobimetallic 1D Coordination Polymers: A Molecular Tectonics Approach at the Solid/Liquid Interface.

The self-assembly of multiple molecular components into complex supramolecular architectures is ubiquitous in nature and constitutes one of the most powerful strategies to fabricate multifunctional nanomaterials making use of the bottom-up approach. When spatial confinement in two dimensions on a solid substrate is employed, this approach can be exploited to generate periodically ordered structures from suitably designed molecular tectons. In this study we demonstrate that physisorbed directional periodic arrays of monometallic or heterobimetallic coordination polymers can be generated on a highly oriented pyrolitic graphite surface by combinations of a suitably designed directional organic tecton or metallatecton based on a porphyrin or nickel(II) metalloporphyrin backbone bearing both a pyridyl unit and a terpyridyl unit acting as coordinating sites for CoCl2. The periodic architectures were visualized at the solid/liquid interface with a submolecular resolution by scanning tunneling microscopy and corroborated by combined density functional and time-dependent density functional theory calculations. The capacity to nanopattern the surface for the first time with two distinct metallic centers exhibiting different electronic and optical properties is a key step toward the bottom-up construction of robust multicomponent and, thus, multifunctional molecular nanostructures and nanodevices.

Assembly, disassembly, and reassembly: conversion of homometallic coordination networks into mixed metal-organic frameworks.

A strategy for the conversion of homometallic coordination networks into mixed metal-organic frameworks (MM'MOFs) is proposed. Ni(II) complexes of dipyrrin (dpm) ligands bearing peripheral pyridyl or imidazolyl units have been shown to self-assemble into coordination polymers with the metal cation in an octahedral environment coordinated to two bis-pyrrolic chelates and two neutral monodentate coordinating units such as pyridyl or imidazolyl moieties. Taking advantage of the chelate effect, the two monodentate units may be replaced by a diimine ligand leading to the disassembly of the networks by the formation of discrete soluble complexes. The latter can be employed as metallatectons for the construction of heterometallic architectures upon reaction with a secondary metal salt. This approach was applied using either 1,10-phenanthroline (phen) or 2,2'-bipyrimidine (bpm) as chelates leading to a series of mono- and binuclear metallatectons of the (phen)Ni(dpm)2 and (bpm)[Ni(dpm)2]2 type. Subsequent assembly with CdCl2 afforded either interpenetrated 2D grid-type architectures or 3D MM'MOFs.

Molecular Tectonics: Design of Enantiopure Luminescent Heterometallic Ir(III)-Cd(II) Coordination Network.

With the aim of combining luminescence and chirality in heterometallic Ir(III)-Cd(II) coordination networks, synthetic strategies for the formation of new Ir(III)-based chiral metallatectons ([Ir(dFppy)2(1)][PF6]), both as a racemic mixture of Δ and Λ enantiomers (rac-[Ir(dFppy)2(1)][PF6]) and as enantiopure complexes (Δ-[Ir(dFppy)2(1)][PF6] and Λ-[Ir(dFppy)2(1)][PF6]), were developed. The final compounds were characterized both in solution and in the crystalline phase. Notably, their crystal structures were determined by single crystal X-ray diffraction, and their photophysical properties in solution and in the solid state were investigated. Combination of the cationic linear metallatecton with Cd(2+) iodide salt ([CdI3](-)), behaving as an anionic two-connecting node, leads to the formation of 1D chiral and neutral heterometallic Ir(III)-Cd(II) luminescent coordination networks both as a racemic mixture and as enantiomerically pure infinite architectures. The latter have been structurally studied in the solid state by X-ray diffraction both on single crystals and on microcrystalline powders. The infinite coordination networks display phosphorescence in the solid state at ca. 600 nm upon excitation at 400 nm.

A silver bite: crystalline heterometallic architectures based on Ag-π interactions with a bis-dipyrrin zinc helicate.

An unprecedented mode of assembly of helical motives and Ag(I)  ions in the crystalline state is described. The combination of a Zn(II) helicate based on a 2,2'-bisdpm bearing peripheral benzonitrile moieties with AgX salts, leads to the formation of a tetranuclear core containing Ag-π interactions. Depending on the coordinating ability of the X(-) anion and the solvents used, the tetranuclear complex self-assembles into coordination polymers of varying dimensionality. From the sequence of coordination events (Ag-π or Ag-peripheral site), one may envisage two possible construction scenarios. However, the Ag-π as primary event seems reasonable owing to the rather weak binding propensity of the nitrile group and the chelating nature of the π-clefts.

Luminescent coordination polymers based on self-assembled cadmium dipyrrin complexes.

A series of novel Cd(II) complexes based on α,ß-unsubstituted dipyrrin ligands (dpm) has been prepared and characterised both in solution and in the solid state. These compounds are of the [Cd(dpm)(2)] type, with the coordination sphere of the metal centre occupied by two dpm chelates. Interestingly, in contrast to what has been reported for the Zn(II) analogues, in the presence of a pyridyl- or imidazolyl-appended dpm ligand, the coordination number of the Cd(II) cation can be increased to six, leading to an octahedral coordination sphere. As a consequence, the formation of 1-, 2-, and 3D coordination polymers by self-assembly is observed. Photophysical investigations of the discrete complexes and self-assembled networks have demonstrated that both types of compounds are luminescent in the solid state.

From sequential to one-pot synthesis of dipyrrin based grid-type mixed metal-organic frameworks.

Both sequential and one-pot strategies for the preparation of a series of grid-type mixed metal-organic frameworks (MM'MOFs) based on dipyrrin ligands appended with either a pyridyl or a phenyl-imidazolyl moiety have been investigated. For the stepwise approach, the differentiation between the two coordination sites (nature, charge, and denticity) was exploited for the synthesis of a family of five discrete Zn(II), Cu(II), and Pd(II) complexes. Acting as metallatectons, these construction building blocks lead to the formation of a series of MM'MOFs upon self-assembly with CdCl2. In these rhombic grid-type architectures, four consecutive metallatectons are bridged by Cd(II) cations adopting an octahedral coordination geometry with the chloride anions occupying apical positions, thus behaving as square nodes. The shape of the rhombus grids as well as the way they are packed (stacking or interpenetration) in the crystalline phase are controlled by the nature of metallatectons and the solvent molecules present in the crystals. Consequently, the heterometallic assemblies display different accessible voids, although they are built on layers with the same connectivity. More interestingly, as demonstrated by X-ray diffraction on both single crystals and microcrystalline powders, the same MM'MOFs were obtained by a one-pot strategy through direct combinations of dipyrrin derivatives with the corresponding metal salts. This one-pot approach is efficient and more convenient than the sequential alternative, since the isolation, purification, and characterization of the, sometimes insoluble, metallatectons are not required.

Modular enhancement of circularly polarized luminescence in Pd2A2B2 heteroleptic cages.

Metal-mediated assembly allows us to combine an achiral emissive ligand A with different chiral ligands (such as B) in a non-statistical fashion, obtaining Pd2A2B2 heteroleptic cages showing circularly polarized luminescence (CPL). By using the 'shape complementary assembly' (SCA) strategy, the cages are exclusively obtained as cis-Pd2A2B2 stereoisomers, as confirmed by NMR, MS and DFT analyses. Their unique chiroptical properties derive from the synergy of all the building blocks. Ligand B imparts the chiral information of its aliphatic backbone, comprising two stereogenic sp3 carbon centres, to the overall structure, causing CD and CPL signal induction for the chromophore on ligand A. The heteroleptic cage shows CPL with a |glum| value of 2.5 × 10-3, which is 3-times higher than that for a progenitor based on aromatic helical building block H, thus opening a rational route towards optimizing the CPL properties of self-assembled nanostructures in a modular way.

Strapped-porphyrin-based molecular turnstiles.

The synthesis of a series of molecular turnstiles that contained both H-bond-donor and -acceptor sites was achieved. Their structures were based on tetra-aryl X(2)Sn(IV) porphyrins (X=Cl or OH) as H-bond-acceptor sites that were equipped with a rotor that contained a pyridyldiamide moiety as a H-bond donor. In the solution phase, 1D and 2D NMR spectroscopic analysis showed that switching between the closed state, which resulted from the formation of intramolecular H-bonds, and the open state of the turnstile was achieved by using external H-bond-acceptor molecules, such as DMSO. The solid-state structure of the closed state of the turnstile was established by single-crystal X-ray diffraction.

Excited state properties and energy transfer within dipyrrin-based binuclear iridium/platinum dyads: the effect of ortho-methylation on the spacer.

Luminescent cyclometalated iridium complexes based on pyridyl appended dipyrrin ligands were prepared and characterized both in the solid state and in solution. The functionalization of the peripheral pyridyl moiety causes dramatic changes on the emission properties of both mono- and hetero- binuclear complexes. A detailed photophysical investigation of the two mononuclear derivatives of the [(Ppy)(2)Ir(dpm-py)] family (Ppy=2-phenylpyridine, dpm-py=5-(4-pyridyl)dipyrrin) was carried out. Introduction of methyl groups at the 3 and 5 positions on the pyridyl unit diminishes the non-radiative rate constant by locking the peripheral pyridyl group orthogonally to the dipyrrinato plane. Thus, they limit the rotational degree of freedom, as well as the charge-transfer character of the excited state. The coordination of these two complexes to a cyclometalated [(dppy)Pt] fragment (dppy=2,6-diphenylpyridine) led to the formation of binuclear species in which the iridium and platinum complexes behave as acceptors and donors, respectively. In these heterobinuclear compounds, the methyl groups do not influence the energy transfer efficiency, which is estimated to be above 90 %. However, they do limit the charge-transfer character of the acceptor's excited state, as well as its rotational degree of freedom, thus avoiding the detrimental effect upon the photophysical performance.

Sensitisation of the near-infrared emission of Nd(III) from the singlet state of porphyrins bearing four 8-hydroxyquinolinylamide chelates.

The α(4) atropoisomer of a tetraaryl porphyrin and its Pd(II) complex, both bearing four hydroxyquinolinyl chelating units pre-organised on the same face of the porphyrin backbone, bind a Nd(III) centre thus affording either a mononuclear or a heterobinuclear anionic species, respectively. The near-infrared emission of the lanthanide centred at 1064 nm is observed upon excitation of the Soret band at 425 nm. Sensitisation proceeds mainly from the singlet state of the porphyrin.

Giant core-shell nanospherical clusters composed of 32 Co or 32 Ni atoms held by 6 p-tert-butylthiacalix[4]arene units.

Using combinations of p-tert-butylthiacalix[4]arene (TCA) and [M(DMSO)(6)(BF(4))(2)] salts (M = Co(II) or Ni(II)), two almost isostructural core-shell-type thermally stable giant nanoclusters, composed of 32 metal centers, 6 deprotonated calix units binding the metal centers by both their O and S atoms, 24 µ-oxo or µ-hydroxo bridging groups, and 6 MeOH molecules, have been prepared under mild and reproducible conditions. For both giant clusters, the oxidation state II [M(II)(32)O(16)(OH)(8)(CH(3)OH)(6)TCA(6) (M = Co or Ni)] for the metal center was demonstrated by X-ray photoelectron and electronic absorption spectroscopies.

New 2-D silver(I) coordination network constructed from thiomethyl group-substituted p-tert-butylthiacalix[]arene.

New ligand based on p-tertbutyltetrathiacalix[4]arene blocked in 1,3-alternate conformation, was achieved via a multistep synthesis with the introduction of thiomethylpropoxy groups on the lower rim which leads to a neutral tecton. The combination of this p-tertbutyltetrathiacalix[4]arene (p-TCA-2), in 1, 3-alternate imposed conformation, with tetrahedral Ag(I)SbF6 salt, leads to the formation of neutral, new 2-D coordination network, which was structurally investigated in the solid state by X-ray diffraction methods on a single crystal.

1-D and 2-D coordination networks based on tetrathiacalix[]arene derivative generated with mercury and cobalt salts.

The combination of four iso-nicotinate appended tetrathiacalix[4]arene (TCA-1) in 1,2-alternate imposed conformation behaving as neutral tectons with Co(II)Cl2 and Hg(II)Cl2 metallic salts, leads to the formation of neutral, new coordination networks. Indeed, the tetrasubstituted TCA-1 derivative leads to a 1D coordination polymer with Co(II)Cl2 and a 2D grid-like network with, Hg(II)Cl2. The effect of the nature of the metal used on the dimensionality was demonstrated by X-ray diffraction studies on a single crystal.

Porphyrin-based switchable molecular turnstiles.

The design, synthesis and structural characterisation, in solution, of two new molecular turnstiles based on Sn-porphyrin derivatives are described. The system is composed of a stator (5-(4-pyridyl)-10,15,20-triphenylporphyrin), a hinge (Sn(IV)) and a rotor (handle equipped with 2,6-pyridinedicarboxamide as a tridentate coordinating site or its Pd(II) complex). The presence of interaction sites, both on the stator and the rotor, offers the possibility of switching between an open state (free rotation of the handle around the porphyrin) and a closed state (blockage of the rotation) by either establishment of hydrogen bonds between the stator and the rotor or by the simultaneous binding of Pd by both coordinating groups.