RESUMO
Solid-state NMR spectroscopy is one of the most commonly used techniques to study the atomic-resolution structure and dynamics of various chemical, biological, material, and pharmaceutical systems spanning multiple forms, including crystalline, liquid crystalline, fibrous, and amorphous states. Despite the unique advantages of solid-state NMR spectroscopy, its poor spectral resolution and sensitivity have severely limited the scope of this technique. Fortunately, the recent developments in probe technology that mechanically rotate the sample fast (100 kHz and above) to obtain "solution-like" NMR spectra of solids with higher resolution and sensitivity have opened numerous avenues for the development of novel NMR techniques and their applications to study a plethora of solids including globular and membrane-associated proteins, self-assembled protein aggregates such as amyloid fibers, RNA, viral assemblies, polymorphic pharmaceuticals, metal-organic framework, bone materials, and inorganic materials. While the ultrafast-MAS continues to be developed, the minute sample quantity and radio frequency requirements, shorter recycle delays enabling fast data acquisition, the feasibility of employing proton detection, enhancement in proton spectral resolution and polarization transfer efficiency, and high sensitivity per unit sample are some of the remarkable benefits of the ultrafast-MAS technology as demonstrated by the reported studies in the literature. Although the very low sample volume and very high RF power could be limitations for some of the systems, the advantages have spurred solid-state NMR investigation into increasingly complex biological and material systems. As ultrafast-MAS NMR techniques are increasingly used in multidisciplinary research areas, further development of instrumentation, probes, and advanced methods are pursued in parallel to overcome the limitations and challenges for widespread applications. This review article is focused on providing timely comprehensive coverage of the major developments on instrumentation, theory, techniques, applications, limitations, and future scope of ultrafast-MAS technology.
Assuntos
Imageamento por Ressonância Magnética , Prótons , Ressonância Magnética Nuclear Biomolecular , Espectroscopia de Ressonância Magnética/métodos , Proteínas de MembranaRESUMO
Despite the extensive industrial and research interests in zeolites, their intrinsic catalytic nature is not fully understood due to the complexity of the hydroxyl-aluminum moieties. 17O NMR would provide irreplaceable opportunities for much-needed fine structural determination given the ubiquitous presence of oxygen atoms in nearly all species; however, the low sensitivity and quadrupolar nature of oxygen-17 make its NMR spectroscopic elucidation challenging. Here, we show that state-of-the-art double resonance solid-state NMR techniques have been combined with spectral editing methods based on scalar (through-bond) and dipolar (through-space) couplings, which allowed us to address the subtle protonic structures in zeolites. Notably, the often-neglected and undesired second-order quadrupolar-dipolar cross-term interaction ("2nd-QD interaction") can actually be exploited and can help gain invaluable information. Eventually, a comprehensive set of 1H-17O/1H-27Al double resonance NMR with J-/D-coupling spectral editing techniques have been designed in this work and enabled us to reveal atomic-scale precise structural and dynamical details in zeolites including: 1) The jump rate of the bridging acid site (BAS) proton is relatively low, i.e., far less than 100 s-1 at room temperature. 2) The Al-OH groups with 1H chemical shift at 2.6-2.8 ppm, at least for nonseverely dealuminated H-ZSM-5 catalysts, exhibit a rigid bridging environment similar to that of BAS. 3) The Si-OH groups at 2.0 ppm are not hydrogen bonded and undergo fast cone-rotational motion. The results in this study predict the 2nd-QD interaction to be universal for any rigid -17O-H environment, such as those in metal oxide surfaces or biomaterials.
RESUMO
Dihydrogen complexes, which retain the H-H bond, have been extensively studied in molecular science and found to be prevalent in homogeneous and enzymatic catalysis. However, their counterparts in heterogeneous catalysis, specifically nondissociative chemisorbed dihydrogen binding on the catalyst surface, are rarely reported experimentally. This scarcity is due to the complexity of typical material surfaces and the lack of effective characterization techniques to prove and distinguish various dihydrogen binding modes. Herein, using high-pressure operando solid-state NMR technology, we report the first unambiguous experimental observation of activated dihydrogen binding on a reduced ceria catalyst through interactions with surface oxygen vacancies. By employing versatile NMR structural and dynamical analysis methods, we establish a proportional relationship between the degree of ceria surface reduction and dihydrogen binding, as evidenced by NMR observations of H-D through-bond coupling (JHD), T1 relaxation, and proton isotropic chemical shifts. In situ NMR analysis further reveals the participation of bound dihydrogen species in a room-temperature ethylene hydrogenation reaction. The remarkable similarities between surface-activated dihydrogen in heterogeneous catalysis and dihydrogen model molecular complexes can provide valuable insights into the hydrogenation mechanism for many other solid catalysts, potentially enhancing hydrogen utilization.
RESUMO
With the development of NMR methodology and technology during the past decades, solid-state NMR (ssNMR) has become a particularly important tool for investigating structure and dynamics at atomic scale in biological systems, where the recoupling techniques play pivotal roles in modern high-resolution MAS NMR. In this review, following a brief introduction on the basic theory of recoupling in ssNMR, we highlight the recent advances in dipolar and chemical shift anisotropy recoupling methods, as well as their applications in structural determination and dynamical characterization at multiple time scales (i.e., fast-, intermediate-, and slow-motion). The performances of these prevalent recoupling techniques are compared and discussed in multiple aspects, together with the representative applications in biomolecules. Given the recent emerging advances in NMR technology, new challenges for recoupling methodology development and potential opportunities for biological systems are also discussed.
Assuntos
Imageamento por Ressonância Magnética , Anisotropia , Espectroscopia de Ressonância Magnética/métodosRESUMO
Because of the growing interest in the applications of zeolitic materials and the various challenges associated with traditional synthesis methods, the development of novel synthesis approaches remains of fundamental importance. Herein, we report a general route for the synthesis of aluminophosphate (AlPO) zeotypes by simple calcination of amorphous precursors at moderate temperatures (250-450 °C) for short reaction times (3-60 min). Accordingly, highly crystalline AlPO zeotypes with various topologies of AST, SOD, LTA, AEL, AFI, and -CLO, ranging from ultra-small to extra-large pores, have been successfully synthesized. Multinuclear multidimensional solid-state NMR techniques combined with complementary operando mass spectrometry (MS), powder X-ray diffraction, high-resolution transmission electron microscopy, and Raman characterizations reveal that covalently bonded fluoride in the intermediates catalyze the bond breaking and remaking processes. The confined organic structure-directing agents with high thermal stability direct the ordered rearrangement. This novel synthesis strategy not only shows excellent synthesis efficiency in terms of a simple synthesis procedure, a fast crystallization rate, and a high product yield, but also sheds new light on the crystallization mechanism of zeolitic materials.
RESUMO
Bistable materials with multiphysical channels, such as optical, electrical, and magnetic properties, have been paid dramatic attention due to their alternativity of the signal status in electronic devices. Herein, three stable supramolecular radicals ([(NH3-TEMPO)(18-crown-6)][XF6] (1, X = P; 2, X = As; 3, X = Sb)) were synthesized and characterized. The former two molecules present ferroelectric phase transitions around 381.7 and 382.7 K, respectively, with bistability in dielectric property and second-harmonic generation (SHG) effect, which are first found in supramolecular radicals. Their ferroelectric transition and bistable properties are generated from a net polar crystal structure owing to the static ordered packing of NH3-TEMPO radical cations in the low-temperature phase (LTP) to a nonpolar structure owing to a distinctive symmetric scissoring motion of NH3-TEMPO radical cations between two 18-crown-6 molecules in the high-temperature phase (HTP). Both of them exhibit paramagnetic properties in HTP and LTP states since no intermolecular spin-spin interaction occurs due to the long distances among the radicals in their crystals. These results make us possible to design bistable optoelectronic radical materials with bistability in magnetic property in the future.
RESUMO
Selective synthesis of specific value-added aromatics from CO2 hydrogenation is of paramount interest for mitigating energy and climate problems caused by CO2 emission. Herein, we report a highly active composite catalyst of ZnZrO and HZSM-5 (ZZO/Z5-SG) for xylene synthesis from CO2 hydrogenation via a coupling reaction in the presence of toluene, achieving a xylene selectivity of 86.5 % with CO2 conversion of 10.5 %. A remarkably high space time yield of xylene could reach 215â mg gcat -1 h-1 , surpassing most reported catalysts for CO2 hydrogenation. The enhanced performance of ZZO/Z5-SG could be due to high dispersion and abundant oxygen vacancies of the ZZO component for CO2 adsorption, more feasible hydrogen activation and transfer due to the close interaction between the two components, and enhanced stability of the formate intermediate. The consumption of methoxy and methanol from the deep hydrogenation of formate by introduced toluene also propels an oriented conversion of CO2 .
RESUMO
Although ketene has been proposed to be an active intermediate in a number of reactions including OXZEO (metal oxide-zeolite)-catalyzed syngas conversion, dimethyl ether carbonylation, methanol to hydrocarbons, and CO2 hydrogenation, its chemistry and reaction pathway over zeolites are not well understood. Herein, we study the pathway of ketene transformation to gasoline range hydrocarbons over the molecular sieve H-SAPO-11 by kinetic analysis, in situ infrared spectroscopy, and solid-state nuclear magnetic resonance spectroscopy. It is demonstrated that butene is the reaction intermediate on the paths toward gasoline products. Ketene transforms to butene on the acid sites via either acetyl species following an acetic acid ketonization pathway or acetoacetyl species with keto-enol tautomerism following an acetoacetic acid decarboxylation pathway when in the presence of water. This study reveals experimentally for the first time insights into ketene chemistry in zeolite catalysis.
RESUMO
Surface metal hydrides (M-H) are ubiquitous in heterogeneous catalytic reactions, while the detailed characterizations are frequently hindered by their high reactivity/low concentration, and the complicated surface structures of the host solids, especially in terms of practical solid catalysts. Herein, combining instant quenching capture and advanced solid-state NMR methodology, we report the first direct and unambiguous NMR evidence on the highly reactive surface gallium hydrides (Ga-H) over a practical Ga2O3 catalyst during direct H2 activation. The spectroscopic effects of 69Ga and 71Ga isotopes on the 1H NMR signal are clearly differentiated and clarified, allowing a concrete discrimination of the Ga-H signal from the hydroxyl crowd. Accompanied with quantitative and two-dimensional NMR spectroscopical methods, as well as density functional theory calculations, information on the site specification, structural configuration, and formation mechanism of the Ga-H species has been revealed, along with the H2 dissociation mechanism. More importantly, the successful spectroscopic identification and isolation of the surface Ga-H allow us to clearly reveal the critical but ubiquitous intermediate role of this species in catalytic reactions, such as propane dehydrogenation and CO2 hydrogenation reactions. The analytic approach presented in this work can be extended to other M-H analysis, and the insights will benefit the design of more efficient Ga-based catalysts.
RESUMO
Sulfur-containing sites in proteins are of great importance for both protein structure and function, including enzymatic catalysis, signaling pathways, and recognition of ligands and protein partners. Selenium-77 is an NMR active spin-1/2 nucleus that shares many physiochemical properties with sulfur and can be readily introduced into proteins at sulfur sites without significant perturbations to the protein structure. The sulfur-containing amino acid methionine is commonly found at protein-protein or protein-ligand binding sites. Its selenium-containing counterpart, selenomethionine, has a broad chemical shift dispersion useful for NMR-based studies of complex systems. Methods such as (1H)-77Se-13C double cross polarization or {77Se}-13C REDOR could be valuable to map the local environment around selenium sites in proteins but have not been demonstrated to date. In this work, we explore these dipolar transfer mechanisms for structural characterization of the GB1 V39SeM variant of the model protein GB1 and demonstrate that 77Se-13C based correlations can be used to map the local environment around selenium sites in proteins. We have found that the general detection limit is ~ 5 Å, but longer range distances up to ~ 7 Å can be observed as well. This study establishes a framework for the future characterization of selenium sites at protein-protein or protein-ligand binding interfaces.
Assuntos
Selênio , Ligantes , Ressonância Magnética Nuclear Biomolecular/métodos , Proteínas/química , Selênio/química , Selênio/metabolismo , Selenometionina/metabolismo , Enxofre/químicaRESUMO
There has been a long debate on how and where active sites are created for molecular adsorption and catalysis in zeolites, which underpin many important industrial applications. It is well accepted that Lewis acidic sites (LASs) and basic sites (LBSs) as active sites in pristine zeolites are generally believed to be the extra-framework Al species and residue anion (OH-) species formed at fixed crystallographic positions after their synthesis. However, the dynamic interactions of adsorbates/reactants with pristine zeotype materials to "create" sites during real conditions remain largely unexplored. Herein, direct experimental observation of the establishment of induced active sites in silicoaluminophosphate (SAPO) by an adsorbate is for the first time made, which contradicts the traditional view of the fixed active sites in zeotype materials. Evidence shows that an induced frustrated Lewis pair (FLP, three-coordinated framework Al as LAS and SiO (H) as LBS) can be transiently favored for heterolytic molecular binding/reactions of competitive polar adsorbates due to their ineffective orbital overlap in the rigid framework. High-resolution magic-angle-spinning solid-state NMR, synchrotron X-ray diffraction, neutron powder diffraction, in situ diffuse reflectance infrared Fourier transform spectroscopy, and ab initio molecular dynamics demonstrate the transformation of a typical Brønsted acid site (Al(OH)Si) in SAPO zeolites to new induced FLP structure for hetereolytic binding upon adsorption of a strong polar adsorbate. Our unprecedented finding opens up a new avenue to understanding the dynamic establishment of active sites for adsorption or chemical reactions under molecular bombardment of zeolitic structures.
RESUMO
Hydroxyl groups are among the major active surface sites over metal oxides. However, their spectroscopic characterizations have been challenging due to limited resolutions, especially on hydroxyl-rich surfaces where strong hydroxyl networks are present. Here, using nanostructured In2O3 as an example, we show significantly enhanced discrimination of the surface hydroxyl groups, owing to the high-resolution 1H NMR spectra performed at a high magnetic field (18.8 T) and a fast magic angle spinning (MAS) of up to 60 kHz. A total of nine kinds of hydroxyl groups were distinguished and their assignments (µ1, µ2, and µ3) were further identified with the assistance of 17O NMR. The spatial distribution of these hydroxyl groups was further explored via two-dimensional (2D) 1H-1H homonuclear correlation experiments with which the complex surface hydroxyl network was unraveled at the atomic level. Moreover, the quantitative analysis of these hydroxyl groups with such high resolution enables further investigations into the physicochemical property and catalytic performance characterizations (in CO2 reduction) of these hydroxyl groups. This work provides insightful understanding on the surface structure/property of the In2O3 nanoparticles and, importantly, may prompt general applications of high-field ultrafast MAS NMR techniques in the study of hydroxyl-rich surfaces on other metal oxide materials.
RESUMO
Layered double hydroxides (LDHs) are potential low-cost filter materials for use in fluoride removal from drinking water, but molecular-scale defluoridation mechanisms are lacking. In this research, we employed 19F solid-state NMR spectroscopy to identify fluoride sorption products on 2:1 MgAl LDH and to reveal the relationship between fluoride sorption and the LDH structure. A set of six 19F NMR peaks centered at -140, -148, -156, -163, -176, and -183 ppm was resolved. Combining quantum chemical calculations based on density function theory (DFT) and 19F{27Al} transfer of populations in double resonance (TRAPDOR) analysis, we could assign the peaks at -140, -148, -156, and -163 ppm to Al-F (F coordinated to surface Al) and those at -176 and -183 ppm to Mg-F (F coordinated to surface Mg only). Interestingly, the spectroscopic data reveal that the formation of Al-F is the predominant mode of F- sorption at low pH, whereas the formation of Mg-F is predominant at high pH (or a higher Mg/Al ratio). This finding supports the fact that the F- uptake of 2:1 MgAl LDH was nearly six times that of activated alumina at pH 9. Overall, we explicitly revealed the different roles of the surface >MgOH and >AlOH sites of LDHs in defluoridation, which explained why the use of classic activated alumina for defluoridation is limited at high pH. The findings from this research may also provide new insights into material screening for potential filters for F- removal under alkaline conditions.
Assuntos
Fluoretos , Hidróxidos , Adsorção , Óxido de Alumínio , Espectroscopia de Ressonância MagnéticaRESUMO
Anion-exchangeable Y2(OH)5X·nH2O (LYH-X, X = monovalent anions, n ≈ 1.5) materials are an ideal platform for incorporating the unique properties of layered metal hydroxides and rare-earth (RE) ions, and thus have exhibited promising prospects for various applications. To further improve the performance of LYH-X and related functional materials, their structure-property relationships must be explored. However, due to the intrinsic felxibility, extracting the local structural details of these materials is particularly challenging. In this work, we utilized a combined approach of 89Y solid-state NMR (ssNMR) spectroscopy and density functional theory (DFT) calculations to reveal the response of 89Y chemical shift anisotropy (CSA) in LYH-X to the structural changes including a small displacement of cationic yttrium hydroxide layers and intercalated anions. Such subtle structural changes are often associated with dehydration/rehydration, anion-exchange, exfoliation, and the self-assembly process of LYH-X and related functional materials, which are exceedingly difficult to detect using other techniques. The principal components of 89Y CSA show a larger variation range than isotropic chemical shifts, making CSA a more sensitive probe. In addition, it is found that the response of 89Y CSA to structural changes is distinct for Y sites with different local coordination environments, opening great opportunities to analyze each Y site within these materials. All these observations suggest that the strategy involving both experimental (89Y ssNMR) and theoretical (DFT) approaches can be utilized to extract previously unavailable ultrafine structural information of LYH-X and related materials, and provide fruitful insights into their thorough structure-property relationships.
RESUMO
With the recent advances in NMR hardware and probe design technology, magic-angle spinning (MAS) rates over 100 âkHz are accessible now, even on commercial solid NMR probes. Under such fast MAS conditions, excellent spectral resolution has been achieved by efficient suppression of anisotropic interactions, which also opens an avenue to the proton-detected NMR experiments in solids. Numerous methods have been developed to take full advantage of fast MAS during the last decades. Among them, dipolar recoupling techniques under fast MAS play vital roles in the determination of the molecular structure and dynamics, and are also key elements in multi-dimensional correlation NMR experiments. Herein, we review the dipolar recoupling techniques, especially those developed in the past two decades for fast-to-ultrafast MAS conditions. A major focus for our discussion is the ratio of RF field strength (in frequency) to MAS frequency, ν1/νr, in different pulse sequences, which determines whether these dipolar recoupling techniques are suitable for NMR experiments under fast MAS conditions. Systematic comparisons are made among both heteronuclear and homonuclear dipolar recoupling schemes. In addition, the schemes developed specially for proton-detection NMR experiments under ultrafast MAS conditions are highlighted as well.
Assuntos
Imageamento por Ressonância Magnética , Prótons , Anisotropia , Espectroscopia de Ressonância Magnética/métodosRESUMO
Colloidal silica spheres with controllable large through-holes and mesopores on the shell were synthesized by using polystyrene (PS) spheres as a hard template and cationic surfactant hexadecyl trimethylammonium bromide (CTAB) as a soft template. Through modulating the synthetic conditions, including the volume ratio of ethanol (EtOH)/water, the amount of ammonia hydroxide, and the dosage of CTAB, SiO2 spheres can transform among hollow structure, through-hole structure, and no large pore structure. The investigation suggests that the hydrolysis rate of the silica source and the interaction strength between the PS sphere template and SiO2 may determine the large pore structure of the final product. The moderate hydrolysis rate of tetraethyl orthosilicate (TEOS) and strong interaction between the PS sphere template and SiO2 is conductive to the formation of large through-holes in SiO2 spheres. To further investigate the pore structure of through-holes of SiO2 spheres, the lysozyme (Lz) was selected as a model molecule for adsorption experiments. The Lz adsorption experiments show that SiO2 spheres with through-hole structure exhibit a much faster adsorption rate than SiO2 spheres with hollow structure and higher adsorption capacity than SiO2 with no large pore structure. Such a behavior could find interesting applications in the fields that require a fast-loading characteristic.
RESUMO
Despite significant progress achieved in Fischer-Tropsch synthesis (FTS) technology, control of product selectivity remains a challenge in syngas conversion. Herein, we demonstrate that Zn2+ -ion exchanged ZSM-5 zeolite steers syngas conversion selectively to ethane with its selectivity reaching as high as 86 % among hydrocarbons (excluding CO2 ) at 20 % CO conversion. NMR spectroscopy, X-ray absorption spectroscopy, and X-ray fluorescence indicate that this is likely attributed to the highly dispersed Zn sites grafted on ZSM-5. Quasi-in-situ solid-state NMR, obtained by quenching the reaction in liquid N2 , detects C2 species such as acetyl (-COCH3 ) bonding with an oxygen, ethyl (-CH2 CH3 ) bonding with a Zn site, and epoxyethane molecules adsorbing on a Zn site and a Brønsted acid site of the catalyst, respectively. These species could provide insight into C-C bond formation during ethane formation. Interestingly, this selective reaction pathway toward ethane appears to be general because a series of other Zn2+ -ion exchanged aluminosilicate zeolites with different topologies (for example, SSZ-13, MCM-22, and ZSM-12) all give ethane predominantly. By contrast, a physical mixture of ZnO-ZSM-5 favors formation of hydrocarbons beyond C3+ . These results provide an important guide for tuning the product selectivity in syngas conversion.
RESUMO
We report a comprehensive understanding of the stereoselective interaction between two opposite enantiomeric polyesters prepared from the regioselective copolymerization of chiral terminal epoxides and cyclic anhydrides. For many of the resultant polyesters, the interactions between polymer chains of opposite chirality are stronger than those of polymer chains with the same chirality, resulting in the formation of a stereocomplex with an enhanced melting point (Tm) and crystallinity. The backbone, tacticity, steric hindrance of the pendant group, and molecular weight of the polyesters have significant effects on stereocomplex formation. Bulky substituent groups favor stereocomplexation, resulting in a greater rise in Tm in comparison to the component enantiomeric polymers. The stereocomplex assembly of discrete (R)- and (S)-poly(phenyl glycidyl ether-alt-phthalic anhydride)s oligomers revealed that the minimum degree of polymerization required for stereocomplex formation is five. Raman spectroscopy and solid-state NMR studies indicate that stereocomplex formation significantly restricts the local mobilities of CâO and C-H groups along the backbone of chains. The reduced mobility results in the enhanced spin-lattice relaxation time and both 1H and 13C downfield shifts due to the strong intermolecular interactions between R- and S-chains.
RESUMO
We combine experimental and computational determination of 43Ca solid-state NMR parameters (chemical shift tensors, quadrupolar coupling tensors, and Euler angles) to constrain the structure of the local calcium-ligand coordination environment. A new 43Ca NMR crystallographic approach which includes an extensive survey of the Cambridge Structural Database and a new symmetry benchmark is developed to enhance the selectivity of structural screening. The application of this method to quadrupolar NMR crystallographic investigations is demonstrated by unearthing the calcium local structure of the active pharmaceutical ingredient atorvastatin calcium trihydrate, the active ingredient in Lipitor®, in the absence of diffraction data. This method has been tested by applying it to calcium acetate monohydrate which has a known structure.
Assuntos
Atorvastatina/química , Cálcio/química , Espectroscopia de Ressonância Magnética , Algoritmos , Cristalografia , Difração de PóRESUMO
Chemical shifts are highly sensitive probes of local conformation and overall structure. Both isotropic shifts and chemical shift tensors are readily accessible from NMR experiments but their quantum mechanical calculations remain challenging. In this work, we report and compare accurately measured and calculated 15NH and 13Cα chemical shift tensors in proteins, using the microcrystalline agglutinin from Oscillatoria agardhii (OAA). Experimental 13Cα and 15NH chemical tensors were obtained by solid-state NMR spectroscopy, employing tailored recoupling sequences, and for their quantum mechanics/molecular mechanics (QM/MM) calculations different sets of functionals were evaluated. We show that 13Cα chemical shift tensors are primarily determined by backbone dihedral angles and dynamics, while 15NH tensors mainly depend on local electrostatic contributions from solvation and hydrogen bonding. In addition, the influence of including crystallographic waters, the molecular mechanics geometry optimization protocol, and the level of theory on the accuracy of the calculated chemical shift tensors is discussed. Specifically, the power of QM/MM calculations in accurately predicting the unusually upfield shifted 1HN G26 and G93 resonances is highlighted. Our integrated approach is expected to benefit structure refinement of proteins and protein assemblies.