Development and performance of SIAT bPET: a high-resolution and high-sensitivity MR-compatible brain PET scanner using dual-ended readout detectors.

PURPOSE: Positron emission tomography/magnetic resonance imaging (PET/MRI) is a powerful tool for brain imaging, but the spatial resolution of the PET scanners currently used for brain imaging can be further improved to enhance the quantitative accuracy of brain PET imaging. The purpose of this study is to develop an MR-compatible brain PET scanner that can simultaneously achieve a uniform high spatial resolution and high sensitivity by using dual-ended readout depth encoding detectors. METHODS: The MR-compatible brain PET scanner, named SIAT bPET, consists of 224 dual-ended readout detectors. Each detector contains a 26 × 26 lutetium yttrium oxyorthosilicate (LYSO) crystal array of 1.4 × 1.4 × 20 mm3 crystal size read out by two 10 × 10 silicon photomultiplier (SiPM) arrays from both ends. The scanner has a detector ring diameter of 376.8 mm and an axial field of view (FOV) of 329 mm. The performance of the scanner including spatial resolution, sensitivity, count rate, scatter fraction, and image quality was measured. Imaging studies of phantoms and the brain of a volunteer were performed. The mutual interferences of the PET insert and the uMR790 3 T MRI scanner were measured, and simultaneous PET/MRI imaging of the brain of a volunteer was performed. RESULTS: A spatial resolution of better than 1.5 mm with an average of 1.2 mm within the whole FOV was obtained. A sensitivity of 11.0% was achieved at the center FOV for an energy window of 350-750 keV. Except for the dedicated RF coil, which caused a ~ 30% reduction of the sensitivity of the PET scanner, the MRI sequences running had a negligible effect on the performance of the PET scanner. The reduction of the SNR and homogeneity of the MRI images was less than 2% as the PET scanner was inserted to the MRI scanner and powered-on. High quality PET and MRI images of a human brain were obtained from simultaneous PET/MRI scans. CONCLUSION: The SIAT bPET scanner achieved a spatial resolution and sensitivity better than all MR-compatible brain PET scanners developed up to date. It can be used either as a standalone brain PET scanner or a PET insert placed inside a commercial whole-body MRI scanner to perform simultaneous PET/MRI imaging.

Voxel-wise mapping of DCE-MRI time-intensity-curve profiles enables visualizing and quantifying hemodynamic heterogeneity in breast lesions.

OBJECTIVES: To propose a novel model-free data-driven approach based on the voxel-wise mapping of DCE-MRI time-intensity-curve (TIC) profiles for quantifying and visualizing hemodynamic heterogeneity and to validate its potential clinical applications. MATERIALS AND METHODS: From December 2018 to July 2022, 259 patients with 325 pathologically confirmed breast lesions who underwent breast DCE-MRI were retrospectively enrolled. Based on the manually segmented breast lesions, the TIC of each voxel within the 3D whole lesion was classified into 19 subtypes based on wash-in rate (nonenhanced, slow, medium, and fast), wash-out enhancement (persistent, plateau, and decline), and wash-out stability (steady and unsteady), and the composition ratio of these 19 subtypes for each lesion was calculated as a new feature set (type-19). The three-type TIC classification, semiquantitative parameters, and type-19 features were used to build machine learning models for identifying lesion malignancy and classifying histologic grades, proliferation status, and molecular subtypes. RESULTS: The type-19 feature-based model significantly outperformed models based on the three-type TIC method and semiquantitative parameters both in distinguishing lesion malignancy (respectively; AUC = 0.875 vs. 0.831, p = 0.01 and 0.875vs. 0.804, p = 0.03), predicting tumor proliferation status (AUC = 0.890 vs. 0.548, p = 0.006 and 0.890 vs. 0.596, p = 0.020), but not in predicting histologic grades (p = 0.820 and 0.970). CONCLUSION: In addition to conventional methods, the proposed computational approach provides a novel, model-free, data-driven approach to quantify and visualize hemodynamic heterogeneity. CLINICAL RELEVANCE STATEMENT: Voxel-wise intra-lesion mapping of TIC profiles allows for visualization of hemodynamic heterogeneity and its composition ratio for differentiation of malignant and benign breast lesions. KEY POINTS: • Voxel-wise TIC profiles were mapped, and their composition ratio was compared between various breast lesions. • The model based on the composition ratio of voxel-wise TIC profiles significantly outperformed the three-type TIC classification model and the semiquantitative parameters model in lesion malignancy differentiation and tumor proliferation status prediction in breast lesions. • This novel, data-driven approach allows the intuitive visualization and quantification of the hemodynamic heterogeneity of breast lesions.

Learning CT-free attenuation-corrected total-body PET images through deep learning.

OBJECTIVES: Total-body PET/CT scanners with long axial fields of view have enabled unprecedented image quality and quantitative accuracy. However, the ionizing radiation from CT is a major issue in PET imaging, which is more evident with reduced radiopharmaceutical doses in total-body PET/CT. Therefore, we attempted to generate CT-free attenuation-corrected (CTF-AC) total-body PET images through deep learning. METHODS: Based on total-body PET data from 122 subjects (29 females and 93 males), a well-established cycle-consistent generative adversarial network (Cycle-GAN) was employed to generate CTF-AC total-body PET images directly while introducing site structures as prior information. Statistical analyses, including Pearson correlation coefficient (PCC) and t-tests, were utilized for the correlation measurements. RESULTS: The generated CTF-AC total-body PET images closely resembled real AC PET images, showing reduced noise and good contrast in different tissue structures. The obtained peak signal-to-noise ratio and structural similarity index measure values were 36.92 ± 5.49 dB (p < 0.01) and 0.980 ± 0.041 (p < 0.01), respectively. Furthermore, the standardized uptake value (SUV) distribution was consistent with that of real AC PET images. CONCLUSION: Our approach could directly generate CTF-AC total-body PET images, greatly reducing the radiation risk to patients from redundant anatomical examinations. Moreover, the model was validated based on a multidose-level NAC-AC PET dataset, demonstrating the potential of our method for low-dose PET attenuation correction. In future work, we will attempt to validate the proposed method with total-body PET/CT systems in more clinical practices. CLINICAL RELEVANCE STATEMENT: The ionizing radiation from CT is a major issue in PET imaging, which is more evident with reduced radiopharmaceutical doses in total-body PET/CT. Our CT-free PET attenuation correction method would be beneficial for a wide range of patient populations, especially for pediatric examinations and patients who need multiple scans or who require long-term follow-up. KEY POINTS: • CT is the main source of radiation in PET/CT imaging, especially for total-body PET/CT devices, and reduced radiopharmaceutical doses make the radiation burden from CT more obvious. • The CT-free PET attenuation correction method would be beneficial for patients who need multiple scans or long-term follow-up by reducing additional radiation from redundant anatomical examinations. • The proposed method could directly generate CT-free attenuation-corrected (CTF-AC) total-body PET images, which is beneficial for PET/MRI or PET-only devices lacking CT image poses.

Short-axis PET image quality improvement based on a uEXPLORER total-body PET system through deep learning.

PURPOSE: The axial field of view (AFOV) of a positron emission tomography (PET) scanner greatly affects the quality of PET images. Although a total-body PET scanner (uEXPLORER) with a large AFOV is more sensitive, it is more expensive and difficult to widely use. Therefore, we attempt to utilize high-quality images generated by uEXPLORER to optimize the quality of images from short-axis PET scanners through deep learning technology while controlling costs. METHODS: The experiments were conducted using PET images of three anatomical locations (brain, lung, and abdomen) from 335 patients. To simulate PET images from different axes, two protocols were used to obtain PET image pairs (each patient was scanned once). For low-quality PET (LQ-PET) images with a 320-mm AFOV, we applied a 300-mm FOV for brain reconstruction and a 500-mm FOV for lung and abdomen reconstruction. For high-quality PET (HQ-PET) images, we applied a 1940-mm AFOV during the reconstruction process. A 3D Unet was utilized to learn the mapping relationship between LQ-PET and HQ-PET images. In addition, the peak signal-to-noise ratio (PSNR) and structural similarity index measure (SSIM) were employed to evaluate the model performance. Furthermore, two nuclear medicine doctors evaluated the image quality based on clinical readings. RESULTS: The generated PET images of the brain, lung, and abdomen were quantitatively and qualitatively compatible with the HQ-PET images. In particular, our method achieved PSNR values of 35.41 ± 5.45 dB (p < 0.05), 33.77 ± 6.18 dB (p < 0.05), and 38.58 ± 7.28 dB (p < 0.05) for the three beds. The overall mean SSIM was greater than 0.94 for all patients who underwent testing. Moreover, the total subjective quality levels of the generated PET images for three beds were 3.74 ± 0.74, 3.69 ± 0.81, and 3.42 ± 0.99 (the highest possible score was 5, and the minimum score was 1) from two experienced nuclear medicine experts. Additionally, we evaluated the distribution of quantitative standard uptake values (SUV) in the region of interest (ROI). Both the SUV distribution and the peaks of the profile show that our results are consistent with the HQ-PET images, proving the superiority of our approach. CONCLUSION: The findings demonstrate the potential of the proposed technique for improving the image quality of a PET scanner with a 320 mm or even shorter AFOV. Furthermore, this study explored the potential of utilizing uEXPLORER to achieve improved short-axis PET image quality at a limited economic cost, and computer-aided diagnosis systems that are related can help patients and radiologists.

Deep learning-based dynamic PET parametric Ki image generation from lung static PET.

OBJECTIVES: PET/CT is a first-line tool for the diagnosis of lung cancer. The accuracy of quantification may suffer from various factors throughout the acquisition process. The dynamic PET parametric Ki provides better quantification and improve specificity for cancer detection. However, parametric imaging is difficult to implement clinically due to the long acquisition time (~ 1 h). We propose a dynamic parametric imaging method based on conventional static PET using deep learning. METHODS: Based on the imaging data of 203 participants, an improved cycle generative adversarial network incorporated with squeeze-and-excitation attention block was introduced to learn the potential mapping relationship between static PET and Ki parametric images. The image quality of the synthesized images was qualitatively and quantitatively evaluated by using several physical and clinical metrics. Statistical analysis of correlation and consistency was also performed on the synthetic images. RESULTS: Compared with those of other networks, the images synthesized by our proposed network exhibited superior performance in both qualitative and quantitative evaluation, statistical analysis, and clinical scoring. Our synthesized Ki images had significant correlation (Pearson correlation coefficient, 0.93), consistency, and excellent quantitative evaluation results with the Ki images obtained in standard dynamic PET practice. CONCLUSIONS: Our proposed deep learning method can be used to synthesize highly correlated and consistent dynamic parametric images obtained from static lung PET. KEY POINTS: • Compared with conventional static PET, dynamic PET parametric Ki imaging has been shown to provide better quantification and improved specificity for cancer detection. • The purpose of this work was to develop a dynamic parametric imaging method based on static PET images using deep learning. • Our proposed network can synthesize highly correlated and consistent dynamic parametric images, providing an additional quantitative diagnostic reference for clinicians.

Identifying the individual metabolic abnormities from a systemic perspective using whole-body PET imaging.

INTRODUCTION: Distinct physiological states arise from complex interactions among the various organs present in the human body. PET is a non-invasive modality with numerous successful applications in oncology, neurology, and cardiology. However, while PET imaging has been applied extensively in detecting focal lesions or diseases, its potential in detecting systemic abnormalities is seldom explored, mostly because total-body imaging was not possible until recently. METHODS: In this context, the present study proposes a framework capable of constructing an individual metabolic abnormality network using a subject's whole-body 18F-FDG SUV image and a normal control database. The developed framework was evaluated in the patients with lung cancer, the one discharged after suffering from Covid-19 disease, and the one that had gastrointestinal bleeding with the underlying cause unknown. RESULTS: The framework could successfully capture the deviation of these patients from healthy subjects at the level of both system and organ. The strength of the altered network edges revealed the abnormal metabolic connection between organs. The overall deviation of the network nodes was observed to be highly correlated to the organ SUV measures. Therefore, the molecular connectivity of glucose metabolism was characterized at a single subject level. CONCLUSION: The proposed framework represents a significant step toward the use of PET imaging for identifying metabolic dysfunction from a systemic perspective. A better understanding of the underlying biological mechanisms and the physiological interpretation of the interregional connections identified in the present study warrant further research.

Parametric image generation with the uEXPLORER total-body PET/CT system through deep learning.

PURPOSE: Total-body dynamic positron emission tomography/computed tomography (PET/CT) provides much sensitivity for clinical imaging and research, bringing new opportunities and challenges regarding the generation of total-body parametric images. This study investigated parametric [Formula: see text] images directly generated from static PET images without an image-derived input function on a 2-m total-body PET/CT scanner (uEXPLORER) using a deep learning model to significantly reduce the dynamic scanning time and improve patient comfort. METHODS: [Formula: see text]F-Fluorodeoxyglucose ([Formula: see text]F-FDG) 2-m total-body PET/CT image pairs were acquired for 200 patients (scanned once) with two protocols: one parametric PET image (60 min, 0[Formula: see text]60 min) and one static PET image (10 min, range of 50[Formula: see text]60 min). A deep learning model was implemented to predict parametric [Formula: see text] images from the static PET images. Evaluation metrics, including the peak signal-to-noise ratio (PSNR), structural similarity index measure (SSIM), and normalized mean square error (NMSE), were calculated for a 10-fold cross-validation assessment. Moreover, image quality was assessed by two nuclear medicine physicians in terms of clinical readings. RESULTS: The synthetic parametric PET images were qualitatively and quantitatively consistent with the reference images. In particular, the global mean SSIM between the synthetic and reference parametric [Formula: see text] images exceeded 0.9 across all test patients. On the other hand, the overall subjective quality of the synthetic parametric PET images was 4.00 ± 0.45 (the highest possible rating is 5) according to the two expert nuclear medicine physicians. CONCLUSION: The findings illustrated the feasibility of the proposed technique and its potential to reduce the required scanning duration for 2-m total-body dynamic PET/CT systems. Moreover, this study explored the potential of direct parametric image generation with uEXPLORER. Deep learning technologies may output high-quality synthetic parametric images, and the validation of clinical applications and the interpretability of network models still need further research in future works.

Determination of residue of diflufenican in wheat and soil by ultra-high-pressure liquid chromatography and mass spectrometry conditions.

BACKGROUND: In order to clarify whether the application of diflufenican in the wheat field will produce residues in wheat plants and soil. In this experiment, ultra-high-pressure liquid chromatography was used to determine the residues of diflufenican in wheat plants, grains, and soil, which provided a new theoretical basis and technical guidance for the safe production of wheat. RESULTS: The results showed that the average diflufenican recovery per added level in wheat and soil were in the range of 85.7% to 91.3%, relative standard deviations were all in a range of 2.43% to 6.00%, and the minimum detectable amount of diflufenican was 1.0 × 10-10 g kg-1 . With the increase of wheat growing days and soil layers, the residues of diflufenican in wheat plants and soil became lower. The order of residual amount of diflufenican in the growth period were heading period, flowering period, filling period and maturing period. The order of residual amount of diflufenican in different soil layers was 0-20, 20-40, 40-60, 60-80 and 80-100 cm respectively from the top to the bottom. In addition, with the increase of the dosage of diflufenican, the residual amount of diflufenican becomes higher. Thus, the residual amount of diflufenican after 2.0 times applied amount was higher than the 1.0 time applied amount. CONCLUSION: The residual amounts of diflufenican in wheat and soil were very small, far below the value of the maximum residue limit (MRL) on wheat provided by China. Under the applied amount administered in this experiment, a single spray of diflufenican in wheat trifoliate is safe for wheat, humans and livestock. © 2020 Society of Chemical Industry.

An iterative reconstruction method for sparse-projection data for low-dose CT.

Reducing X-ray radiation is beneficial for reducing the risk of cancer in patients. There are two main approaches for achieving this goal namely, one is to reduce the X-ray current, and another is to apply sparse-view protocols to do image scanning and projections. However, these techniques usually lead to degradation of the reconstructed image quality, resulting in excessive noise and severe edge artifacts, which seriously affect the diagnosis result. In order to overcome such limitation, this study proposes and tests an algorithm based on guided kernel filtering. The algorithm combines the characteristics of anisotropic edges between adjacent image voxels, expresses the relevant weights with an exponential function, and adjusts the weights adaptively through local gray gradients to better preserve the image structure while suppressing noise information. Experiments show that the proposed method can effectively suppress noise and preserve the image structure. Comparing with similar algorithms, the proposed algorithm greatly improves the peak signal-to-noise ratio (PSNR), structural similarity (SSIM), and root mean square error (RMSE) of the reconstructed image. The proposed algorithm has the best effect in quantitative analysis, which verifies the effectiveness of the proposed method and good image reconstruction performance. Overall, this study demonstrates that the proposed method can reduce the number of projections required for repeated CT scans and has potential for medical applications in reducing radiation doses.

Correcting motion artifacts in coronary computed tomography angiography images using a dual-zone cycle generative adversarial network.

BACKGROUND: Coronary computed tomography angiography (CCTA) is a noninvasive imaging modality to detect and diagnose coronary artery disease. Due to the limitations of equipment and the patient's physiological condition, some CCTA images collected by 64-slice spiral computed tomography (CT) have motion artifacts in the right coronary artery, left circumflex coronary artery and other positions. OBJECTIVE: To perform coronary artery motion artifact correction on clinical CCTA images collected by Siemens 64-slice spiral CT and evaluate the artifact correction method. METHODS: We propose a novel method based on the generative adversarial network (GAN) to correct artifacts of CCTA clinical images. We use CCTA clinical images collected by 64-slice spiral CT as the original dataset. Pairs of regions of interest (ROIs) cropped from original dataset or images with and without motion artifacts are used to train the dual-zone GAN. When predicting the CCTA images, the network inputs only the clinical images with motion artifacts. RESULTS: Experiments show that this network effectively corrects CCTA motion artifacts. Regardless of ROIs or images, the peak signal to noise ratio (PSNR), structural similarity (SSIM), mean square error (MSE) and mean absolute error (MAE) of the generated images are greatly improved compared to those of the input data. In addition, based on scores from physicians, the average score for the coronary artery artifact correction of the output images is higher. CONCLUSIONS: This study demonstrates that the dual-zone GAN has the excellent ability to correct motion artifacts in the coronary arteries and maintain the overall characteristics of CCTA clinical images.

FaNet: fast assessment network for the novel coronavirus (COVID-19) pneumonia based on 3D CT imaging and clinical symptoms.

The novel coronavirus (COVID-19) pneumonia has become a serious health challenge in countries worldwide. Many radiological findings have shown that X-ray and CT imaging scans are an effective solution to assess disease severity during the early stage of COVID-19. Many artificial intelligence (AI)-assisted diagnosis works have rapidly been proposed to focus on solving this classification problem and determine whether a patient is infected with COVID-19. Most of these works have designed networks and applied a single CT image to perform classification; however, this approach ignores prior information such as the patient's clinical symptoms. Second, making a more specific diagnosis of clinical severity, such as slight or severe, is worthy of attention and is conducive to determining better follow-up treatments. In this paper, we propose a deep learning (DL) based dual-tasks network, named FaNet, that can perform rapid both diagnosis and severity assessments for COVID-19 based on the combination of 3D CT imaging and clinical symptoms. Generally, 3D CT image sequences provide more spatial information than do single CT images. In addition, the clinical symptoms can be considered as prior information to improve the assessment accuracy; these symptoms are typically quickly and easily accessible to radiologists. Therefore, we designed a network that considers both CT image information and existing clinical symptom information and conducted experiments on 416 patient data, including 207 normal chest CT cases and 209 COVID-19 confirmed ones. The experimental results demonstrate the effectiveness of the additional symptom prior information as well as the network architecture designing. The proposed FaNet achieved an accuracy of 98.28% on diagnosis assessment and 94.83% on severity assessment for test datasets. In the future, we will collect more covid-CT patient data and seek further improvement.

Low-dose CT reconstruction method based on prior information of normal-dose image.

BACKGROUND: Radiation risk from computed tomography (CT) is always an issue for patients, especially those in clinical conditions in which repeated CT scanning is required. For patients undergoing repeated CT scanning, a low-dose protocol, such as sparse scanning, is often used, and consequently, an advanced reconstruction algorithm is also needed. OBJECTIVE: To develop a novel algorithm used for sparse-view CT reconstruction associated with the prior image. METHODS: A low-dose CT reconstruction method based on prior information of normal-dose image (PI-NDI) involving a transformed model for attenuation coefficients of the object to be reconstructed and prior information application in the forward-projection process was used to reconstruct CT images from sparse-view projection data. A digital extended cardiac-torso (XCAT) ventral phantom and a diagnostic head phantom were employed to evaluate the performance of the proposed PI-NDI method. The root-mean-square error (RMSE), peak signal-to-noise ratio (PSNR) and mean percent absolute error (MPAE) of the reconstructed images were measured for quantitative evaluation of the proposed PI-NDI method. RESULTS: The reconstructed images with sparse-view projection data via the proposed PI-NDI method have higher quality by visual inspection than that via the compared methods. In terms of quantitative evaluations, the RMSE measured on the images reconstructed by the PI-NDI method with sparse projection data is comparable to that by MLEM-TV, PWLS-TV and PWLS-PICCS with fully sampled projection data. When the projection data are very sparse, images reconstructed by the PI-NDI method have higher PSNR values and lower MPAE values than those from the compared algorithms. CONCLUSIONS: This study presents a new low-dose CT reconstruction method based on prior information of normal-dose image (PI-NDI) for sparse-view CT image reconstruction. The experimental results validate that the new method has superior performance over other state-of-art methods.

Automatic left ventricle segmentation from cardiac magnetic resonance images using a capsule network.

PURPOSE: Segmentation of magnetic resonance images (MRI) of the left ventricle (LV) plays a key role in quantifying the volumetric functions of the heart, such as the area, volume, and ejection fraction. Traditionally, LV segmentation is performed manually by experienced experts, which is both time-consuming and prone to subjective bias. This study aims to develop a novel capsule-based automated segmentation method to automatically segment the LV from images obtained by cardiac MRI. METHOD: The technique applied for segmentation uses Fourier analysis and the circular Hough transform (CHT) to indicate the approximate location of the LV and a network capsule to precisely segment the LV. The neurons of the capsule network output a vector and preserve much of the information about the input by replacing the largest pooling layer with convolutional strides and dynamic routing. Finally, the segmentation result is postprocessed by threshold segmentation and morphological processing to increase the accuracy of LV segmentation. RESULTS: We fully exploit the capsule network to achieve the segmentation goal and combine LV detection and capsule concepts to complete LV segmentation. In the experiments, the tested methods achieved LV Dice scores of 0.922±0.05 end-diastolic (ED) and 0.898±0.11 end-systolic (ES) on the ACDC 2017 data set. The experimental results confirm that the algorithm can effectively perform LV segmentation from a cardiac magnetic resonance image. To verify the performance of the proposed method, visual and quantitative comparisons are also performed, which show that the proposed method exhibits improved segmentation accuracy compared with the traditional method. CONCLUSIONS: The evaluation metrics of medical image segmentation indicate that the proposed method in combination with postprocessing and feature detection effectively improves segmentation accuracy for cardiac MRI. To the best of our knowledge, this study is the first to use a deep learning model based on capsule networks to systematically evaluate end-to-end LV segmentation.

Evaluation of reconstruction algorithms for a stationary digital breast tomosynthesis system using a carbon nanotube X-ray source array.

Breast cancer is the most frequently diagnosed cancer in women worldwide. Digital breast tomosynthesis (DBT), which is based on limited-angle tomography, was developed to solve tissue overlapping problems associated with traditional breast mammography. However, due to the problems associated with tube movement during the process of data acquisition, stationary DBT (s-DBT) was developed to allow the X-ray source array to stay stationary during the DBT scanning process. In this work, we evaluate four widely used and investigated DBT image reconstruction algorithms, including the commercial Feldkamp-Davis-Kress algorithm (FBP), the simultaneous iterative reconstruction technique (SIRT), the simultaneous algebraic reconstruction technique (SART) and the total variation regularized SART (SART-TV) for an s-DBT imaging system that we set up in our own laboratory for studies using a semi-elliptical digital phantom and a rubber breast phantom to determine the most superior algorithm for s-DBT image reconstruction among the four algorithms. Several quantitative indexes for image quality assessment, including the peak signal-noise ratio (PSNR), the root mean square error (RMSE) and the structural similarity (SSIM), are used to determine the best algorithm for the imaging system that we set up. Image resolutions are measured via the calculation of the contrast-to-noise ratio (CNR) and artefact spread function (ASF). The experimental results show that the SART-TV algorithm gives reconstructed images with the highest PSNR and SSIM values and the lowest RMSE values in terms of image accuracy and similarity, along with the highest CNR values calculated for the selected features and the best ASF curves in terms of image resolution in the horizontal and vertical directions. Thus, the SART-TV algorithm is proven to be the best algorithm for use in s-DBT image reconstruction for the specific imaging task in our study.

Low-Dose Computed Tomography Image Super-Resolution Reconstruction via Random Forests.

Aiming at reducing computed tomography (CT) scan radiation while ensuring CT image quality, a new low-dose CT super-resolution reconstruction method based on combining a random forest with coupled dictionary learning is proposed. The random forest classifier finds the optimal solution of the mapping relationship between low-dose CT (LDCT) images and high-dose CT (HDCT) images and then completes CT image reconstruction by coupled dictionary learning. An iterative method is developed to improve robustness, the important coefficients for the tree structure are discussed and the optimal solutions are reported. The proposed method is further compared with a traditional interpolation method. The results show that the proposed algorithm can obtain a higher peak signal-to-noise ratio (PSNR) and structural similarity index measurement (SSIM) and has better ability to reduce noise and artifacts. This method can be applied to many different medical imaging fields in the future and the addition of computer multithreaded computing can reduce time consumption.

Positron emission tomography image reconstruction using feature extraction.

PURPOSE: To reduce the cost of positron emission tomography (PET) scanning systems, image reconstruction algorithms for low-sampled data have been extensively studied. However, the current method based on total variation (TV) minimization regularization nested in the maximum likelihood-expectation maximization (MLEM) algorithm cannot distinguish true structures from noise resulting losing some fine features in the images. Thus, this work aims to recover fine features lost in the MLEM-TV algorithm from low-sampled data. METHOD: A feature refinement (FR) approach previously developed for statistical interior computed tomography (CT) reconstruction is applied to PET imaging to recover fine features in this study. The proposed method starts with a constant initial image and the FR step is performed after each MLEM-TV iteration to extract the desired structural information lost during TV minimization. A feature descriptor is specifically designed to distinguish structure from noise and artifacts. A modified steepest descent method is adopted to minimize the objective function. After evaluating the impacts of different patch sizes on the outcome of the presented method, an optimal patch size of 7×7 is selected in this study to balance structure-detection ability and computational efficiency. RESULTS: Applying MLEM-TV-FR algorithm to the simulated brain PET imaging using an emission activity phantom, a standard Shepp-Logan phantom, and mouse results in the increased peak signal-to-noise ratio (PSNR) and structural similarity (SSIM) as comparing to using the conventional MLEM-TV algorithm, as well as the substantial reduction of the used sampling numbers, which improves the computational efficiency. CONCLUSIONS: The presented algorithm can achieve image quality superior to that of the MLEM and MLEM-TV approaches in terms of the preservation of fine structure and the suppression of undesired artifacts and noise, indicating its useful potential for low-sampled data in PET imaging.

Iterative image reconstruction for sparse-view CT via total variation regularization and dictionary learning.

Recently, low-dose computed tomography (CT) has become highly desirable due to the increasing attention paid to the potential risks of excessive radiation of the regular dose CT. However, ensuring image quality while reducing the radiation dose in the low-dose CT imaging is a major challenge. Compared to classical filtered back-projection (FBP) algorithms, statistical iterative reconstruction (SIR) methods for modeling measurement statistics and imaging geometry can significantly reduce the radiation dose, while maintaining the image quality in a variety of CT applications. To facilitate low-dose CT imaging, we in this study proposed an improved statistical iterative reconstruction scheme based on the penalized weighted least squares (PWLS) standard combined with total variation (TV) minimization and sparse dictionary learning (DL), which is named as a method of PWLS-TV-DL. To evaluate this PWLS-TV-DL method, we performed experiments on digital phantoms and physical phantoms, and analyzed the results in terms of image quality and calculation. The results show that the proposed method is better than the comparison methods, which indicates the potential of applying this PWLS-TV-DL method to reconstruct low-dose CT images.

Few-view CT image reconstruction using improved total variation regularization.

X-ray radiation is harmful to human health. Thus, obtaining a better reconstructed image with few projection view constraints is a major challenge in the computed tomography (CT) field to reduce radiation dose. In this study, we proposed and tested a new algorithm that combines penalized weighted least-squares using total generalized variation (PWLS-TGV) and dictionary learning (DL), named PWLS-TGV-DL to address this challenge. We first presented and tested this new algorithm and evaluated it through both data simulation and physical experiments. We then analyzed experimental data in terms of image qualitative and quantitative measures, such as the structural similarity index (SSIM) and the root mean square error (RMSE). The experiments and data analysis indicated that applying the new algorithm to CT data recovered images more efficiently and yielded better results than the traditional CT image reconstruction approaches.

Image reconstruction from few-view CT data by gradient-domain dictionary learning.

BACKGROUND: Decreasing the number of projections is an effective way to reduce the radiation dose exposed to patients in medical computed tomography (CT) imaging. However, incomplete projection data for CT reconstruction will result in artifacts and distortions. OBJECTIVE: In this paper, a novel dictionary learning algorithm operating in the gradient-domain (Grad-DL) is proposed for few-view CT reconstruction. Specifically, the dictionaries are trained from the horizontal and vertical gradient images, respectively and the desired image is reconstructed subsequently from the sparse representations of both gradients by solving the least-square method. METHODS: Since the gradient images are sparser than the image itself, the proposed approach could lead to sparser representations than conventional DL methods in the image-domain, and thus a better reconstruction quality is achieved. RESULTS: To evaluate the proposed Grad-DL algorithm, both qualitative and quantitative studies were employed through computer simulations as well as real data experiments on fan-beam and cone-beam geometry. CONCLUSIONS: The results show that the proposed algorithm can yield better images than the existing algorithms.

Improved total variation minimization method for few-view computed tomography image reconstruction.

BACKGROUND: Due to the harmful radiation dose effects for patients, minimizing the x-ray exposure risk has been an area of active research in medical computed tomography (CT) imaging. In CT, reducing the number of projection views is an effective means for reducing dose. The use of fewer projection views can also lead to a reduced imaging time and minimizing potential motion artifacts. However, conventional CT image reconstruction methods will appears prominent streak artifacts for few-view data. Inspired by the compressive sampling (CS) theory, iterative CT reconstruction algorithms have been developed and generated impressive results. METHOD: In this paper, we propose a few-view adaptive prior image total variation (API-TV) algorithm for CT image reconstruction. The prior image reconstructed by a conventional analytic algorithm such as filtered backprojection (FBP) algorithm from densely angular-sampled projections. RESULTS: To validate and evaluate the performance of the proposed algorithm, we carried out quantitative evaluation studies in computer simulation and physical experiment. CONCLUSION: The results show that the API-TV algorithm can yield images with quality comparable to that obtained with existing algorithms.