Photocatalytic Overall Water Splitting over PbTiO3 Modulated by Oxygen Vacancy and Ferroelectric Polarization.

Ferroelectric materials hold great promise in the field of photocatalytic water splitting due to their spontaneous polarization that sets up an inherent internal field for the spatial separation of photogenerated charges. The ferroelectric polarization, however, is generally accompanied by some intrinsic defects, particularly oxygen vacancies, whose impact upon photocatalysis is far from being fully understood and modulated. Here, we have studied the role of oxygen vacancies over the photocatalytic behavior of single-domain PbTiO3 through a combination of theoretical and experimental viewpoints. Our results indicate that the oxygen vacancies in the negatively polarized facet (001) are active sites for water oxidation into O2, while the defect-free sites prefer H2O2 as the oxidation product. The apparent quantum yield at 435 nm for photocatalytic overall water splitting with PbTiO3/Rh/Cr2O3 is determined to be 0.025%, which is remarkable for single undoped metal oxide-based photocatalysts. Furthermore, the strong correlation among oxygen vacancies, polarization strength, and photocatalytic activity is properly reflected by charge separation conditions in the single-domain PbTiO3. This work clarifies the crucial role of oxygen vacancies during photocatalytic reactions of PbTiO3, which provides a useful guide to the design of efficient ferroelectric photocatalysts and their water redox reaction pathways.

Regulation of Ferroelectric Polarization to Achieve Efficient Charge Separation and Transfer in Particulate RuO2 /BiFeO3 for High Photocatalytic Water Oxidation Activity.

Exploiting spontaneous polarization of ferroelectric materials to achieve high charge separation efficiency is an intriguing but challenging research topic in solar energy conversion. This work shows that loading high work function RuO2 cocatalyst on BiFeO3 (BFO) nanoparticles enhances the intrinsic ferroelectric polarization by efficient screening of charges to RuO2 via RuO2 /BFO heterojunction. This leads to enhancement of the surface photovoltage of RuO2 /BFO single nanoparticles nearly 3 times, the driving force for charge separation and transfer in photocatalytic reactions. Consequently, efficient photocatalytic water oxidation is achieved with quantum efficiency as high as 5.36 % at 560 nm, the highest activity reported so far for ferroelectric materials. This work demonstrates that, unlike low photocurrent density in film-based ferroelectric devices, high photocatalytic activity could be achieved by regulating the ferroelectric spontaneous polarization using appropriate cocatalyst to enhance driving force for efficient separation and transfer of photogenerated charges in particulate ferroelectric semiconductor materials.

Epitaxial Strain Enhanced Ferroelectric Polarization toward a Giant Tunneling Electroresistance.

A substantial ferroelectric polarization is the key for designing high-performance ferroelectric nonvolatile memories. As a promising candidate system, the BaTiO3/La0.67Sr0.33MnO3 (BTO/LSMO) ferroelectric/ferromagnetic heterostructure has attracted a lot of attention thanks to the merits of high Curie temperature, large spin polarization, and low ferroelectric coercivity. Nevertheless, the BTO/LSMO heterostructure suffers from a moderate FE polarization, primarily due to the quick film-thickness-driven strain relaxation. In response to this challenge, we propose an approach for enhancing the FE properties of BTO films by using a Sr3Al2O6 (SAO) buffering layer to mitigate the interfacial strain relaxation. The continuously tunable strain allows us to illustrate the linear dependence of polarization on epitaxial strain with a large strain-sensitive coefficient of ∼27 µC/cm2 per percent strain. This results in a giant polarization of ∼80 µC/cm2 on the BTO/LSMO interface. Leveraging this large polarization, we achieved a giant tunneling electroresistance (TER) of ∼105 in SAO-buffered Pt/BTO/LSMO ferroelectric tunnel junctions (FTJs). Our research uncovers the fundamental interplay between strain, polarization magnitude, and device performance, such as on/off ratio, thereby advancing the potential of FTJs for next-generation information storage applications.

Taming heat with tiny pressure.

Heat is almost everywhere. Unlike electricity, which can be easily manipulated, the current ability to control heat is still highly limited owing to spontaneous thermal dissipation imposed by the second law of thermodynamics. Optical illumination and pressure have been used to switch endothermic/exothermic responses of materials via phase transitions; however, these strategies are less cost-effective and unscalable. Here, we spectroscopically demonstrate the glassy crystal state of 2-amino-2-methyl-1,3-propanediol (AMP) to realize an affordable, easily manageable approach for thermal energy recycling. The supercooled state of AMP is so sensitive to pressure that even several megapascals can induce crystallization to the ordered crystal, resulting in a substantial temperature increase of 48 K within 20 s. Furthermore, we demonstrate a proof-of-concept device capable of programable heating with an extremely high work-to-heat conversion efficiency of ∼383. Such delicate and efficient tuning of heat may remarkably facilitate rational utilization of waste heat.

Schottky Barrier Control of Self-Polarization for a Colossal Ferroelectric Resistive Switching.

Controlling the domain evolution is critical both for optimizing ferroelectric properties and for designing functional electronic devices. Here we report an approach of using the Schottky barrier formed at the metal/ferroelectric interface to tailor the self-polarization states of a model ferroelectric thin film heterostructure system SrRuO3/(Bi,Sm)FeO3. Upon complementary investigations of the piezoresponse force microscopy, electric transport measurements, X-ray photoelectron/absorption spectra, and theoretical studies, we demonstrate that Sm doping changes the concentration and spatial distribution of oxygen vacancies with the tunable host Fermi level which modulates the SrRuO3/(Bi,Sm)FeO3 Schottky barrier and the depolarization field, leading to the evolution of the system from a single domain of downward polarization to polydomain states. Accompanied by such modulation on self-polarization, we further tailor the symmetry of the resistive switching behaviors and achieve a colossal on/off ratio of ∼1.1 × 106 in the corresponding SrRuO3/BiFeO3/Pt ferroelectric diodes (FDs). In addition, the present FD also exhibits a fast operation speed of ∼30 ns with a potential for sub-nanosecond and an ultralow writing current density of ∼132 A/cm2. Our studies provide a way for engineering self-polarization and reveal its strong link to the device performance, facilitating FDs as a competitive memristor candidate used for neuromorphic computing.

Gradient tungsten-doped Bi3TiNbO9 ferroelectric photocatalysts with additional built-in electric field for efficient overall water splitting.

Bi3TiNbO9, a layered ferroelectric photocatalyst, exhibits great potential for overall water splitting through efficient intralayer separation of photogenerated carriers motivated by a depolarization field along the in-plane a-axis. However, the poor interlayer transport of carriers along the out-of-plane c-axis, caused by the significant potential barrier between layers, leads to a high probability of carrier recombination and consequently results in low photocatalytic activity. Here, we have developed an efficient photocatalyst consisting of Bi3TiNbO9 nanosheets with a gradient tungsten (W) doping along the c-axis. This results in the generation of an additional electric field along the c-axis and simultaneously enhances the magnitude of depolarization field within the layers along the a-axis due to strengthened structural distortion. The combination of the built-in field along the c-axis and polarization along the a-axis can effectively facilitate the anisotropic migration of photogenerated electrons and holes to the basal {001} surface and lateral {110} surface of the nanosheets, respectively, enabling desirable spatial separation of carriers. Hence, the W-doped Bi3TiNbO9 ferroelectric photocatalyst with Rh/Cr2O3 cocatalyst achieves an efficient and durable overall water splitting feature, thereby providing an effective pathway for designing excellent layered ferroelectric photocatalysts.