Light Energy Conversion Surface with Gold Dendritic Nanoforests/Si Chip for Plasmonic Polymerase Chain Reaction.

Surfaces with gold dendritic nanoforests (Au DNFs) on Si chips demonstrate broadband-light absorption. This study is the first to utilize localized surface plasmons of Au DNFs/Si chips for polymerase chain reaction (PCR) applications. A convenient halogen lamp was used as the heating source to illuminate the Au DNFs/Si chip for PCR. A detection target of Salmonella spp. DNA fragments was reproduced in this plasmonic PCR chip system. By semi-quantitation in gel electrophoresis analysis, the plasmonic PCR with 30 cycles and a largely reduced processing time provided results comparable with those of a commercial PCR thermal cycler with 40 cycles in more than 1 h. In the presence of an Au DNFs/Si chip, the plasmonic PCR provides superior results in a short processing time.

Tunable plasmonic effects arising from metal-dielectric nanorods.

We have investigated the plasmonic effects in a two-dimensional periodic array of metallodielectric nanorods with and without the rotational angle, in which the integration of the localized surface plasmon resonance (SPR) and hollow plasmon resonance (HPR) properties is performed. Four patterns of nanostructures are investigated. We make use of the three-dimensional finite element method to obtain the simulation results, which demonstrate that the localized SPR and HPR in metallodielectric nanorods enhance the near-field intensity and increase the depth of the transmittance dip, providing an additional degree of freedom in the control of the light wave at the nanoscale. Numerical results show that the depth of the transmittance dip and sensitivity of case 1 and case 2 can be elevated to a value of 83.21% and 6.7 times, respectively, when the rotational angle of metal-dielectric nanorods varies from 0° to 90°. The sensitivity of case 3 and case 4 can be raised to the magnitude of 700-1091 nm/RIU (where RIU is the refractive index unit), and the characteristics enable the extensive applications for nanophotonic devices with high performance in a predictable manner.

A first-principles study of the electrically tunable band gap in few-layer penta-graphene.

The structural and electronic properties of bilayer (AA- and AB-stacked) and tri-layer (AAA-, ABA- and AAB-stacked) penta-graphene (PG) have been investigated in the framework of density functional theory. The present results demonstrate that the ground state energy in AB stacking is lower than that in AA stacking, whereas ABA stacking is found to be the most energetically favorable, followed by AAB and AAA stackings. All considered model configurations are found to be semiconducting, independent of the stacking sequence. In the presence of a perpendicular electric field, their band gaps can be significantly reduced and completely closed at a specific critical electric field strength, demonstrating a Stark effect. These findings show that few-layer PG will have tremendous opportunities to be applied in nanoscale electronic and optoelectronic devices owing to its tunable band gap.

Confined migration of induced hot electrons in Ag/graphene/TiO2 composite nanorods for plasmonic photocatalytic reaction.

Confined migration of hot electrons is presented in nanorods of layered Ag/graphene/TiO2 structure for highly efficient plasmonic photocatalytic water treatment. The light-illuminating titanium dioxide (TiO2) nanorods provide a large amount of high-energy hot electrons for the generation of highly-active superoxide radical (*O2 -) that leads to the degradation of organics in water. Comparison between photocatalytic processing efficiency by photocatalysts with various composite materials were presented based on the preferred propagation path of induced hot electrons that leads to generation of *O2 -. The best results done by Ag/graphene/TiO2 nanorods showed that the sandwiched layer of graphene on TiO2 nanorods collects the induced hot electrons and results in high efficiency photocatalytic reaction.

Effects of external light in the magnetic field-modulated photocatalytic reactions in a microfluidic chip reactor.

Photocatalytic reactions and their magnetic-field enhancement present significant potential for practical applications in green chemistry. This work presents the mutual enhancement of plasmonic photocatalytic reaction by externally applied magnetic field and plasmonic enhancement in a micro optofluidic chip reactor. The tiny gold (Au) nanoparticles of only a few atoms fixed on the surface of titanium dioxide (TiO2) nanoparticles lead to mutually boosted enhancement photocatalytic reactions under an external magnetic field and plasmonic effects. The dominant factor of adding green light to the photocatalytic reaction leads to the understanding that it is a plasmonic effect. The positive results of adding ethanol alcohol (EA) in the experiments further present that it is a hot electron dominant path photocatalytic reaction that is positively enhanced by both the external magnetic field and plasmonic effects. This work offers great potential for utilizing magnetic field enhancement in plasmonic photocatalytic reactions.

ZnO nanorod optical disk photocatalytic reactor for photodegradation of methyl orange.

A low-cost and efficient photocatalytic reactor for environmental treatment and green technology was presented. ZnO nanorods firmly growing on polycarbonate optical disk substrate are generally perpendicular to the substrate as the immobilized photocatalyst of the spinning disk reactor. The photocatalytic efficiency and durability of the ZnO nanorods are effectively demonstrated.

Optical imaging with spectrum aberration correction using a filtering macrolens.

A filtering macrolens was developed to simultaneously achieve macro-optical imaging and correct spectrum aberration. The macrolens was a doublet lens comprising a filtering lens and a close-up lens. The shape of the filtering lens was designed to eliminate the optical path differences between the light rays in the absorbing medium. The close-up lens was designed to decrease the effective focal length of an ordinary camera lens to provide high magnification capability and collimate the diverging beams through the filtering lens. Experimental results demonstrated that the spectrum uniformity of the macro-optical images was markedly improved by the filtering macrolens. This innovation may be used in finite conjugate optical systems.

Enhancement of luminous efficacy of polymer light-emitting diodes with silver-nanoparticles by oxygen-plasma treatment.

Silver-nanoparticles deposited on indium tin oxide (AgNPs/ITO) with different O2 -plasma treatment times are used as the anode window substrate for polymer light-emitting diodes (PLED). When AgNPs/ITO with an O2 -plasma treatment time of 10 min is used for PLED, a maximum current efficiency of 3.33 cd/A is realized, which is notably higher than that of a reference PLED (1.00 cd/A). Compared to those of the reference PLED, the mean current efficiency and electroluminescence intensity of the optimal PLED are enhanced by 3.24 times and 480%, respectively. O2 -plasma treatment is an easy method for optimizing the localized surface plasmon resonance effect of metal nanoparticles, exhibiting advantages of scalable mass production and high suitability for applications in related optoelectronic components.

Effect of synthesis time on plasmonic properties of Ag dendritic nanoforests.

The effects of synthesis time on the plasmonic properties of Ag dendritic nanoforests on Si substrate (Ag-DNF/Si) samples synthesized through the fluoride-assisted galvanic replacement reaction were investigated. The Ag-DNF/Si samples were characterized using scanning electron microscopy, energy-dispersive X-ray spectroscopy, reflection spectroscopy, X-ray diffraction and surface-enhanced Raman spectroscopy (SERS). The prolonged reaction time led to the growth of an Ag-DNF layer and etched Si hole array. SEM images and variations in the fractal dimension index indicated that complex-structure, feather-like leaves became coral-like branches between 30 and 60 min of synthesis. The morphological variation during the growth of the Ag DNFs resulted in different optical responses to light illumination, especially those of light harvest and energy transformation. The sample achieved the most desirable light-to-heat conversion efficiency and SERS response with a 30 min growth time. A longer synthesis time or thicker Ag-DNF layer on the Si substrate did not have superior plasmonic properties.

Au@Ag Dendritic Nanoforests for Surface-Enhanced Raman Scattering Sensing.

The effects of Au cores in Ag shells in enhancing surface-enhanced Raman scattering (SERS) were evaluated with samples of various Au/Ag ratios. High-density Ag shell/Au core dendritic nanoforests (Au@Ag-DNFs) on silicon (Au@Ag-DNFs/Si) were synthesized using the fluoride-assisted Galvanic replacement reaction method. The synthesized Au@Ag-DNFs/Si samples were characterized using scanning electron microscopy, energy-dispersive X-ray spectroscopy, reflection spectroscopy, X-ray diffraction, and Raman spectroscopy. The ultraviolet-visible extinction spectrum exhibited increased extinction induced by the addition of Ag when creating the metal DNFs layer. The pure Ag DNFs exhibited high optical extinction of visible light, but low SERS response compared with Au@Ag DNFs. The Au core (with high refractive index real part) in Au@Ag DNFs maintained a long-leaf structure that focused the illumination light, resulting in the apparent SERS enhancement of the Ag coverage.

A multichannel color filter with the functions of optical sensor and switch.

This paper reports a multichannel color filter with the functions of optical sensor and switch. The proposed structure comprises a metal-insulator-metal (MIM) bus waveguide side-couples to six circular cavities with different sizes for filtering ultra-violet and visible lights into individual colors in the wavelength range of 350-700 nm. We used the finite element method to analyze the electromagnetic field distributions and transmittance properties by varying the structural parameters in detail. The designed plasmonic filter takes advantage of filtering out different colors since the light-matter resonance and interference between the surface plasmon polaritons (SPPs) modes within the six cavities. Results show that the designed structure can preferentially select the desired colors and confine the SPPS modes in one of the cavities. This designed structure can filter eleven color channels with a small full width at half maximum (FWHM) ~ 2 nm. Furthermore, the maximum values of sensitivity, figure of merit, quality factor, dipping strength, and extinction ratio can achieve of 700 nm/RIU, 350 1/RIU, 349.0, 65.04%, and 174.50 dB, respectively, revealing the excellent functions of sensor performance and optical switch, and offering a chance for designing a beneficial nanophotonic device.

Dendritic Forest-Like Ag Nanostructures Prepared Using Fluoride-Assisted Galvanic Replacement Reaction for SERS Applications.

Dendritic forest-like Ag nanostructures were deposited on a silicon wafer through fluoride-assisted galvanic replacement reaction (FAGRR) in aqueous AgNO3 and buffered oxide etchant. The prepared nanostructures were characterized using scanning electron microscopy, energy-dispersive X-ray spectroscopy, inductively coupled plasma-optical emission spectroscopy, a surface profiler (alpha step), and X-ray diffraction. Additionally, the dendritic forest-like Ag nanostructures were characterized using surface-enhanced Raman scattering (SERS) when a 4-mercaptobenzoic acid (4-MBA) monolayer was adsorbed on the Ag surface. The Ag nanostructures exhibited intense SERS signal from 4-MBA because of their rough surface, and this intense signal led to an intense local electromagnetic field upon electromagnetic excitation. The enhancement factor for 4-MBA molecules adsorbed on the Ag nanostructures was calculated to be 9.18 × 108. Furthermore, common Raman reporters such as rhodamine 6G, 4-aminothiolphenol, 5,5'-dithiobis-2-nitrobenzoic acid, and carboxyfluorescein (FAM) were characterized on these dendritic forest-like Ag nanostructures, leading to the development of an ultrasensitive SERS-based DNA sensor with a limit of detection of 33.5 nM of 15-mer oligonucleotide.

Ultrahigh Sensitivity of a Plasmonic Pressure Sensor with a Compact Size.

This study proposes a compact plasmonic metal-insulator-metal pressure sensor comprising a bus waveguide and a resonator, including one horizontal slot and several stubs. We calculate the transmittance spectrum and the electromagnetic field distribution using the finite element method. When the resonator's top layer undergoes pressure, the resonance wavelength redshifts with increasing deformation, and their relation is nearly linear. The designed pressure sensor possesses the merits of ultrahigh sensitivity, multiple modes, and a simple structure. The maximum sensitivity and resonance wavelength shift can achieve 592.44 nm/MPa and 364 nm, respectively, which are the highest values to our knowledge. The obtained sensitivity shows 23.32 times compared to the highest one reported in the literature. The modeled design paves a promising path for applications in the nanophotonic field.

Significantly enhanced coupling effect and gap plasmon resonance in a MIM-cavity based sensing structure.

Herein, we design a high sensitivity with a multi-mode plasmonic sensor based on the square ring-shaped resonators containing silver nanorods together with a metal-insulator-metal bus waveguide. The finite element method can analyze the structure's transmittance properties and electromagnetic field distributions in detail. Results show that the coupling effect between the bus waveguide and the side-coupled resonator can enhance by generating gap plasmon resonance among the silver nanorods, increasing the cavity plasmon mode in the resonator. The suggested structure obtained a relatively high sensitivity and acceptable figure of merit and quality factor of about 2473 nm/RIU (refractive index unit), 34.18 1/RIU, and 56.35, respectively. Thus, the plasmonic sensor is ideal for lab-on-chip in gas and biochemical analysis and can significantly enhance the sensitivity by 177% compared to the regular one. Furthermore, the designed structure can apply in nanophotonic devices, and the range of the detected refractive index is suitable for gases and fluids (e.g., gas, isopropanol, optical oil, and glucose solution).

Silicon-Based Ag Dendritic Nanoforests for Light-Assisted Bacterial Inhibition.

Silver dendritic nanoforests (Ag-DNFs) on silicon (Ag-DNFs/Si) were synthesized through the fluoride-assisted Galvanic replacement reaction (FAGRR) method. The synthesized Ag-DNFs/Si were characterized by scanning electron microscopy, energy-dispersive X-ray spectrometry, inductively coupled plasma mass spectrometry (ICP-MS), reflection absorbance spectrometry, surface-enhanced Raman scattering spectrometry, and X-ray diffractometry. The Ag+ concentration in ICP-MS measurements indicated 1.033 mg/cm2 of deposited Ag synthesized for 200 min on Si substrate. The optical absorbance spectra indicated the induced surface plasmon resonance of Ag DNFs increased with the thickness of the Ag DNFs layer. Surface-enhanced Raman scattering measurement and a light-to-heat energy conversion test presented the superior plasmonic response of Ag-DNFs/Si for advanced applications. The Ag-DNFs/Si substrate exhibited high antibacterial activity against Escherichia coli and Staphylococcus aureus. The large surface area of the dense crystal Ag DNFs layer resulted in high antibacterial efficiency. The plasmonic response in the metal-crystal Ag DNFs under external light illumination can supply energy to enhance bacterial inhibition. High-efficiency plasmonic heating by the dense Ag DNFs can lead to localized bacterial inhibition. Thus, the Ag-DNFs/Si substrate has excellent potential for antibacterial applications.

Ultrawide Bandgap and High Sensitivity of a Plasmonic Metal-Insulator-Metal Waveguide Filter with Cavity and Baffles.

A plasmonic metal-insulator-metal waveguide filter consisting of one rectangular cavity and three silver baffles is numerically investigated using the finite element method and theoretically described by the cavity resonance mode theory. The proposed structure shows a simple shape with a small number of structural parameters that can function as a plasmonic sensor with a filter property, high sensitivity and figure of merit, and wide bandgap. Simulation results demonstrate that a cavity with three silver baffles could significantly affect the resonance condition and remarkably enhance the sensor performance compared to its counterpart without baffles. The calculated sensitivity (S) and figure of merit (FOM) in the first mode can reach 3300.00 nm/RIU and 170.00 RIU-1. Besides, S and FOM values can simultaneously get above 2000.00 nm/RIU and 110.00 RIU-1 in the first and second modes by varying a broad range of the structural parameters, which are not attainable in the reported literature. The proposed structure can realize multiple modes operating in a wide wavelength range, which may have potential applications in the on-chip plasmonic sensor, filter, and other optical integrated circuits.

Highly Sensitive and Tunable Plasmonic Sensor Based on a Nanoring Resonator with Silver Nanorods.

We numerically and theoretically investigate a highly sensitive and tunable plasmonic refractive index sensor that is composed of a metal-insulator-metal waveguide with a side-coupled nanoring, containing silver nanorods using the finite element method. Results reveal that the presence of silver nanorods in the nanoring has a significant impact on sensitivity and tunability performance. It gives a flexible way to tune the system response in the proposed structure. Our designed sensor has a sensitivity of 2080 nm/RIU (RIU is the refractive index unit) along with a figure of merit and a quality factor of 29.92 and 29.67, respectively. The adequate refractive index sensitivity can increase by adding the silver nanorods in a nanoring, which can induce new surface plasmon polaritons (SPPs) modes that cannot be found by a regular nanoring. For a practical application, a valid introduction of silver nanorods in the nanoring can dramatically reduce the dimension of the proposed structure without sacrificing performance.

Perfect Dual-Band Absorber Based on Plasmonic Effect with the Cross-Hair/Nanorod Combination.

Plasmonic effect using a cross-hair can convey strongly localized surface plasmon modes among the separated composite nanostructures. Compared to its counterpart without the cross-hair, this characteristic has the remarkable merit of enhancing absorptance at resonance and can make the structure carry out a dual-band plasmonic perfect absorber (PPA). In this paper, we propose and design a novel dual-band PPA with a gathering of four metal-shell nanorods using a cross-hair operating at visible and near-infrared regions. Two absorptance peaks at 1050 nm and 750 nm with maximal absorptance of 99.59% and 99.89% for modes 1 and 2, respectively, are detected. High sensitivity of 1200 nm refractive unit (1/RIU), figure of merit of 26.67 and Q factor of 23.33 are acquired, which are very remarkable compared with the other PPAs. In addition, the absorptance in mode 1 is about nine times compared to its counterpart without the cross-hair. The proposed structure gives a novel inspiration for the design of a tunable dual-band PPA, which can be exploited for plasmonic sensor and other nanophotonic devices.

Reusable TiN Substrate for Surface Plasmon Resonance Heterodyne Phase Interrogation Sensor.

A TiN-based substrate with high reusability presented high-sensitivity refractive index measurements in a home-built surface plasmon resonance (SPR) heterodyne phase interrogation system. TiN layers with and without additional inclined-deposited TiN (i-TiN) layers on glass substrates reached high bulk charge carrier densities of 1.28 × 1022 and 1.91 × 1022 cm-3, respectively. The additional 1.4 nm i-TiN layer of the nanorod array presented a detection limit of 6.1 × 10-7 RIU and was higher than that of the 46 nm TiN layer at 1.2 × 10-6 RIU when measuring the refractive index of a glucose solution. Furthermore, the long-term durability of the TiN-based substrate demonstrated by multiple processing experiments presented a high potential for various practical sensing applications.

Magnetic Field-Enhancing Photocatalytic Reaction in Micro Optofluidic Chip Reactor.

A small external magnetic field (100-1000 Oe) was demonstrated to enhance the photocatalytic degradation of methyl orange (MO) using TiO2 NPs in micro optofluidic chip (MOFC) reactors. The rectangular shape of the fluidic channel and TiO2 deposited only onto the lower glass substrate leads to a selectively enhancing photocatalytic reactions by magnetic field in specific directions. Utilizing ethyl alcohol as a scavenger presented the difference between generated hot-hole (hVB+) and hot-electron (eCB-) pathways of photocatalytic reactions. Effects of dissolved oxygen (DO) and hydroxyl ions (OH-) are all demonstrated in a magnetic field-enhancing photocatalytic reaction. The experimental results demonstrate great potential for practical applications utilizing low-price fixed magnets in the field of green chemistry.