Atomically-Thin Holey 2D Nanosheets of Defect-Engineered MoN-Mo5 N6 Composites as Effective Hybridization Matrices.

The defect engineering of inorganic solids has received significant attention because of its high efficacy in optimizing energy-related functionalities. Consequently, this approach is effectively leveraged in the present study to synthesize atomically-thin holey 2D nanosheets of a MoN-Mo5 N6 composite. This is achieved by controlled nitridation of assembled MoS2 monolayers, which induced sequential cation/anion migration and a gradual decrease in the Mo valency. Precise control of the interlayer distance of the MoS2 monolayers via assembly with various tetraalkylammonium ions is found to be crucial for synthesizing sub-nanometer-thick holey MoN-Mo5 N6 nanosheets with a tunable anion/cation vacancy content. The holey MoN-Mo5 N6 nanosheets are employed as efficient immobilization matrices for Pt single atoms to achieve high electrocatalytic mass activity, decent durability, and low overpotential for the hydrogen evolution reaction (HER). In situ/ex situ spectroscopy and density functional theory (DFT) calculations reveal that the presence of cation-deficient Mo5 N6 domain is crucial for enhancing the interfacial interactions between the conductive molybdenum nitride substrate and Pt single atoms, leading to enhanced electron injection efficiency and electrochemical stability. The beneficial effects of the Pt-immobilizing holey MoN-Mo5 N6 nanosheets are associated with enhanced electronic coupling, resulting in improvements in HER kinetics and interfacial charge transfer.

Synergistic Control of Structural Disorder and Surface Bonding Nature to Optimize the Functionality of Manganese Oxide as an Electrocatalyst and a Cathode for Li-O2 Batteries.

An efficient way to improve the electrocatalyst and Li-O2 battery performances of metal oxide is developed by an exquisite synergistic control over structural disorder and surface bonding nature. The effects of amorphous nature and surface chemical environment on the functionalities of metal oxide are systematically investigated with well-crystalline and amorphous MnO2 nanocrystals with/without surface anchoring of highly oxidized iodate clusters. The amorphous MnO2 nanocrystal containing anchored iodate clusters shows much better performance as an oxygen evolution electrocatalyst and cathode catalyst for Li-O2 batteries than both iodate-free amorphous and well-crystalline homologues, underscoring the remarkable advantage of simultaneous enhancement of structural disorder and surface electron density. In situ X-ray absorption spectroscopic analysis demonstrates the promoted formation of double (MnO) bond, a critical step of oxygen evolution reaction, upon amorphization caused by the poor orbital overlap inside highly disordered crystallites. The beneficial effects of iodate anchoring and amorphization on electrocatalyst functionality are attributable to the alteration of surface bonding character, stabilization of Jahn-Teller active Mn3+ species, and enhanced charge transfer of interfaces. The present study underscores that fine-tuning of structural disorder and surface bonding nature provides an effective methodology to explore efficient metal oxide-based electrocatalysts.

Co2+-Doping of Magic-Sized CdSe Clusters: Structural Insights via Ligand Field Transitions.

Magic-sized clusters represent materials with unique properties at the border between molecules and solids and provide important insights into the nanocrystal formation process. However, synthesis, doping, and especially structural characterization become more and more challenging with decreasing cluster size. Herein, we report the successful introduction of Co2+ ions into extremely small-sized CdSe clusters with the intention of using internal ligand field transitions to obtain structural insights. Despite the huge mismatch between the radii of Cd2+ and Co2+ ions (>21%), CdSe clusters can be effectively synthesized with a high Co2+ doping concentration of ∼10%. Optical spectroscopy and mass spectrometry suggest that one or two Co2+ ions are substitutionally embedded into (CdSe)13 clusters, which is known as one of the smallest CdSe clusters. Using magnetic circular dichroism spectroscopy on the intrinsic ligand field transitions between the different 3d orbitals of the transition metal dopants, we demonstrate that the Co2+ dopants are embedded on pseudotetrahedral selenium coordinated sites despite the limited number of atoms in the clusters. A significant shortening of Co-Se bond lengths compared to bulk or nanocrystals is observed, which results in the metastability of Co2+ doping. Our results not only extend the doping chemistry of magic-sized semiconductor nanoclusters, but also suggest an effective method to characterize the local structure of these extremely small-sized clusters.

Highly Selective Photoreduction of CO2 with Suppressing H2 Evolution over Monolayer Layered Double Hydroxide under Irradiation above 600†nm.

Although progress has been made to improve photocatalytic CO2 reduction under visible light (λ>400 nm), the development of photocatalysts that can work under a longer wavelength (λ>600 nm) remains a challenge. Now, a heterogeneous photocatalyst system consisting of a ruthenium complex and a monolayer nickel-alumina layered double hydroxide (NiAl-LDH), which act as light-harvesting and catalytic units for selective photoreduction of CO2 and H2 O into CH4 and CO under irradiation with λ>400 nm. By precisely tuning the irradiation wavelength, the selectivity of CH4 can be improved to 70.3 %, and the H2 evolution reaction can be completely suppressed under irradiation with λ>600 nm. The photogenerated electrons matching the energy levels of photosensitizer and m-NiAl-LDH only localized at the defect state, providing a driving force of 0.313 eV to overcome the Gibbs free energy barrier of CO2 reduction to CH4 (0.127 eV), rather than that for H2 evolution (0.425 eV).

Two-Dimensional Layered Hydroxide Nanoporous Nanohybrids Pillared with Zero-Dimensional Polyoxovanadate Nanoclusters for Enhanced Water Oxidation Catalysis.

The oxygen-evolution reaction (OER) is critical in electrochemical water splitting and requires an efficient, sustainable, and cheap catalyst for successful practical applications. A common development strategy for OER catalysts is to search for facile routes for the synthesis of new catalytic materials with optimized chemical compositions and structures. Here, nickel hydroxide Ni(OH)2 2D nanosheets pillared with 0D polyoxovanadate (POV) nanoclusters as an OER catalyst that can operate in alkaline media are reported. The intercalation of POV nanoclusters into Ni(OH)2 induces the formation of a nanoporous layer-by-layer stacking architecture of 2D Ni(OH)2 nanosheets and 0D POV with a tunable chemical composition. The nanohybrid catalysts remarkably enhance the OER activity of pristine Ni(OH)2 . The present findings demonstrate that the intercalation of 0D POV nanoclusters into Ni(OH)2 is effective for improving water oxidation catalysis and represents a potential method to synthesize novel, porous hydroxide-based nanohybrid materials with superior electrochemical activities.

Recent Applications of 2D Inorganic Nanosheets for Emerging Energy Storage System.

Among many types of nanostructured inorganic materials, highly anisotropic 2D nanosheets provide unique advantages in designing and synthesizing efficient electrode and electrocatalyst materials for novel energy storage technologies. 2D inorganic nanosheets boast lots of unique characteristics such as high surface area, short ion diffusion path, tailorable compositions, and tunable electronic structures. These merits of 2D inorganic nanosheets render them promising candidate materials as electrodes for diverse secondary batteries and supercapacitors, and electrocatalysts. A wide spectrum of examples is presented for inorganic nanosheet-based electrodes and electrocatalysts. Future perspectives in research about 2D nanosheet-based functional materials are discussed to provide insight for the development of next-generation energy storage systems using 2D nanostructured materials.

Ordered Mesoporous C3 N5 with a Combined Triazole and Triazine Framework and Its Graphene Hybrids for the Oxygen Reduction Reaction (ORR).

Mesoporous carbon nitrides (MCN) with C3 N4 stoichiometry could find applications in fields ranging from catalysis, sensing, and adsorption-separation to biotechnology. The extension of the synthesis of MCN with different nitrogen contents and chemical structures promises access to a wider range of applications. Herein we prepare mesoporous C3 N5 with a combined triazole and triazine framework via a simple self-assembly of 5-amino-1H-tetrazole (5-ATTZ). We are able to hybridize these nanostructures with graphene by using graphene-mesoporous-silica hybrids as a template to tune the electronic properties. DFT calculations and spectroscopic analyses clearly demonstrate that the C3 N5 consists of 1 triazole and 2 triazine moieties. The triazole-based mesoporous C3 N5 and its graphene hybrids are found to be highly active for oxygen reduction reaction (ORR) with a higher diffusion-limiting current density and a decreased overpotential than those of bulk g-C3 N4 .

α-MnO2 Nanowire-Anchored Highly Oxidized Cluster as a Catalyst for Li-O2 Batteries: Superior Electrocatalytic Activity and High Functionality.

An effective chemical way to optimize the oxygen electrocatalyst and Li-O2 electrode functionalities of metal oxide can be developed by the control of chemical bond nature with the surface anchoring of highly oxidized selenate (SeO4 2- ) clusters. The bond competition between (Se6+ -O) and (Mn-O) bonds is quite effective in stabilizing Jahn-Teller-active Mn3+ state and in increasing oxygen electron density of α-MnO2 nanowire (NW). The selenate-anchored α-MnO2 NW shows excellent oxygen electrocatalytic activity and electrode performance for Li-O2 batteries, which is due to the improved charge transfer kinetics and reversible formation/decomposition of Li2 O2 . The present study underscores that the surface anchoring of highly oxidized cluster can provide a facile, effective way of improving the oxygen electrocatalyst and electrochemical performances of nanostructured metal oxide in Li-O2 cells.

A 2D Metal Oxide Nanosheet as an Efficient Additive for Improving Na-Ion Electrode Activity of Graphene-Based Nanocomposites.

An efficient way to improve the Na-ion electrode activity of graphene-based nanocomposite is developed by employing exfoliated metal oxide nanosheet as an additive. The titanate-nanosheet-incorporated Na-SnS2 -reduced graphene oxide (rG-O) nanocomposites can be synthesized by the electrostatically derived restacking of the colloidal mixture of SnS2 , rG-O, and titanate nanosheets with the Na+ cation. The incorporation of titanate into the Na-SnS2 -rG-O nanocomposites is effective in improving the nanoscale mixing of component nanosheets and the porosity of the composite structure. The resulting nanocomposites deliver superior discharge capacities and rate properties to the titanate-free nanocomposite. The universal applicability is further confirmed by MoS2 -rG-O nanocomposites upon the addition of titanate. This study highlights that the exfoliated metal oxide nanosheet can be used as an efficient additive for graphene-based nanocomposites to explore Na-ion electrode materials.

Kinetically Controlled Layer-by-Layer Stacking of Metal Oxide 2D Nanosheets.

An efficient chemical way to finely control the layer-by-layer stacking of inorganic nanosheets (NS) is developed by tuning the type and composition of intercalant ion, and the reaction temperature for restacking process. The finely controlled stacking of NS relies on a kinetic control of the self-assembly of NS in the presence of coordinating organic cations. A critical role of organic cations in this assembly highlights the importance of the appropriate activation energy. Of prime importance is that a fine-control of the interstratification of 2D NS is highly effective not only in tailoring its pore structure but also in enhancing its electrode activity. The present study clearly demonstrates that the kinetically controlled restacking of NS provides a facile and powerful method to tailor their stacking number and functionality.

A Conductive Hybridization Matrix of RuO2 Two-Dimensional Nanosheets: A Hybrid-Type Photocatalyst.

A universal methodology to efficiently improve the photocatalyst performance of semiconductors was developed by employing exfoliated RuO2 two-dimensional nanosheets as a conducting hybridization matrix. The hybridization with a RuO2 nanosheet is easily achieved by crystal growth or electrostatically derived anchoring of semiconductor nanocrystals on the RuO2 nanosheet. An enhanced chemical interaction of inorganic semiconductor with hydrophilic RuO2 nanosheet is fairly effective in optimizing their photocatalytic activity and photostability by the enhancement of charge separation and charge mobility. The RuO2 -containing nanohybrids show much better photocatalyst functionalities than do the graphene-containing ones. The present study clearly demonstrates that hydrophilic RuO2 nanosheets are superior hybridization matrices, over the widely used hydrophobic graphene nanosheets, for exploring new efficient hybrid-type photocatalysts.

Route to the Smallest Doped Semiconductor: Mn(2+)-Doped (CdSe)13 Clusters.

Doping semiconductor nanocrystals with magnetic transition-metal ions has attracted fundamental interest to obtain a nanoscale dilute magnetic semiconductor, which has unique spin exchange interaction between magnetic spin and exciton. So far, the study on the doped semiconductor NCs has usually been conducted with NCs with larger than 2 nm because of synthetic challenges. Herein, we report the synthesis and characterization of Mn(2+)-doped (CdSe)13 clusters, the smallest doped semiconductors. In this study, single-sized doped clusters are produced in large scale. Despite their small size, these clusters have semiconductor band structure instead of that of molecules. Surprisingly, the clusters show multiple excitonic transitions with different magneto-optical activities, which can be attributed to the fine structure splitting. Magneto-optically active states exhibit giant Zeeman splittings up to elevated temperatures (128 K) with large g-factors of 81(±8) at 4 K. Our results present a new synthetic method for doped clusters and facilitate the understanding of doped semiconductor at the boundary of molecules and quantum nanostructure.

Porous Hybrid Network of Graphene and Metal Oxide Nanosheets as Useful Matrix for Improving the Electrode Performance of Layered Double Hydroxides.

Mesoporous hybrid network of reduced graphene oxide (rG-O) and layered MnO(2) nanosheets could act as an efficient immobilization matrix for improving the electrochemical activity of layered double hydroxide (LDH). The control of MnO(2) /rG-O ratio is crucial in optimizing the porous structure and electrical conductivity of the resulting hybrid structure. The immobilization of Co-Al-LDH on hybrid MnO(2) /rG-O network is more effective in enhancing its electrode activity compared with that of on pure rG-O network. The Co-Al-LDH-rG-O-MnO(2) nanohybrid deliveres a greater specific capacitance than does MnO(2) -free Co-Al-LDH-rG-O nanohybrid. The beneficial effect of MnO(2) incorporation on the electrode performance of nanohybrid is more prominent for higher current density and faster scan rate, underscoring the significant enhancement of the electron transport of Co-Al-LDH-rG-O. This is supported by electrochemical impedance spectroscopy. The present study clearly demonstrates the usefulness of the porously assembled hybrid network of graphene and metal oxide nanosheets as an effective platform for exploring efficient LDH-based functional materials.

A Crucial Role of Rh Substituent Ion in Photoinduced Internal Electron Transfer and Enhanced Photocatalytic Activity of CdS-Ti(5.2-x)/6 Rhx /2 O2 Nanohybrids.

The photocatalytic activity and photostability of CdS quantum dot (QD) can be remarkably enhanced by hybridization with Rh-substituted layered titanate nanosheet even at very low Rh substitution rate (<1%). Mesoporous CdS-Ti(5.2-x)/6 Rhx/2O2 nanohybrids are synthesized by a self-assembly of exfoliated Ti(5.2-x)/6 Rhx/2O2 nanosheets with CdS QDs. The partial substitution of Rh(3+)/Rh(4+) ions for Ti(4+) ions in layered titanate is quite effective in enhancing an electronic coupling between hybridized CdS and titanate components via the formation of interband Rh 4d states. A crucial role of Rh substituent ion in the internal electron transfer is obviously evidenced from in situ X-ray absorption spectroscopy showing the elongation of (RhO) bond under visible light irradiation. This is the first spectroscopic evidence for the important role of substituent ion in the photoinduced electron transfer of hybrid-type photocatalyst. The CdS-Ti(5.2-x)/6 Rhx/2O2 nanohybrids show much higher photocatalytic activity for H2 production and better photostability than do CdS and unsubstituted CdS-TiO2 nanohybrid. This result is ascribable to the enhancement of visible light absorptivity, the depression of electron-hole recombination, and the enhanced hole curing of CdS upon Rh substitution. The present study underscores that the hybridization with composition-controlled inorganic nanosheet provides a novel efficient methodology to optimize the photo-related functionalities of semiconductor nanocrystal.

A direct hybridization between isocharged nanosheets of layered metal oxide and graphene through a surface-modification assembly process.

An efficient and universal method to directly hybridize isocharged nanosheets of layered metal oxide and reduced graphene oxide (rGO) is developed on the basis of the surface modification and an electrostatically driven assembly process. On the basis of this synthetic method, the CoO2 -rGO nanocomposite can be synthesized with exfoliated CoO2 and rGO nanosheets, and transformed into CoO-CoO2 -rGO nanocomposites with excellent electrode performance for lithium-ion batteries. Also, this surface-modification assembly route is successfully applied for the synthesis of another mesoporous TiO2 -rGO nanocomposite. This result provides clear evidence for the usefulness of the present method as a universal way of hybridizing isocharged anionic nanosheets of inorganic solids and graphene.

A linker-mediated self-assembly method to couple isocharged nanostructures: layered double hydroxide-CdS nanohybrids with high activity for visible-light-induced H2 generation.

The electrostatically derived self-assembly of cationic Zn-Cr-layered double hydroxide (LDH) nanosheets and cationic CdS quantum dots (QDs) with anionic linkers leads to the formation of strongly coupled Zn-Cr-LDH-CdS nanohybrids. The hybridization with Zn-Cr-LDH leads to significant enhancement of the photocatalytic activity of CdS for visible-light-induced H2 generation, a property that is attributed to the depression of electron-hole recombination. In comparison with a direct hybridization method between oppositely charged species, this linker-mediated method provides greater flexibility in controlling the chemical composition and electronic coupling of the nanohybrids. The present hybridization strategy provides a useful method not only to couple two kinds of isocharged nanostructured materials, but also to explore efficient hybrid-type photocatalysts.

Unique properties of 2 D layered titanate nanosheets as a building block for the optimization of the photocatalytic activity and photostability of TiO2-based nanohybrids.

In comparison with the hybridization with 0D TiO2 nanoparticle, 2D layered TiO2 nanosheets are much more effective in the improvement of the photocatalytic activity and photostability of semiconducting compounds. The 2D TiO2-Ag3PO4 nanohybrid described in this paper shows a greater decrease in the electron-hole recombination upon hybridization and a stronger chemical interaction between the components than the 0D homologue. This result confirms the benefits of 2D layered TiO2 nanosheets as a building block for efficient hybrid-type photocatalyst materials.

Composition-tailored 2 D Mn(1-x)Ru(x)O(2) nanosheets and their reassembled nanocomposites: improvement of electrode performance upon Ru substitution.

Composition-tailored Mn1-x Rux O2 2 D nanosheets and their reassembled nanocomposites with mesoporous stacking structure are synthesized by a soft-chemical exfoliation reaction and the subsequent reassembling of the exfoliated nanosheets with Li(+) cations, respectively. The tailoring of the chemical compositions of the exfoliated Mn1-x Rux O2 2 D nanosheets and their lithiated nanocomposites can be achieved by adopting the Ru-substituted layered manganese oxides as host materials for exfoliation reaction. Upon the exfoliation-reassembling process, the substituted ruthenium ions remain stabilized in the layered Mn1-x Rux O2 lattice with mixed Ru(3+) /Ru(4+) oxidation state. The reassembled Li-Mn1-x Rux O2 nanocomposites show promising pseudocapacitance performance with large specific capacitances of approximately 330 F g(-1) for the second cycle and approximately 360 F g(-1) for the 500th cycle and excellent cyclability, which are superior to those of the unsubstituted Li-MnO2 homologue and many other MnO2 -based materials. Electrochemical impedance spectroscopy analysis provides strong evidence for the enhancement of the electrical conductivity of 2 D nanostructured manganese oxide upon Ru substitution, which is mainly responsible for the excellent electrode performance of Li-Mn1-x Rux O2 nanocomposites. The results underscore the powerful role of the composition-controllable metal oxide 2 D nanosheets as building blocks for exploring efficient electrode materials.

Ammonolysis-Driven Exsolution of Ru Nanoparticle Embedded in Conductive Metal Nitride Matrix to Boost Electrocatalyst Activity.

Exsolution is an effective method for synthesizing robust nanostructured metal-based functional materials. However, no studies have investigated the exsolution of metal nanoparticles into metal nitride substrates. In this study, a versatile nitridation-driven exsolution method is developed for embedding catalytically active metal nanoparticles in conductive metal nitride substrates via the ammonolysis of multimetallic oxides. Using this approach, Ti1-xRuxO2 nanowires are phase-transformed into holey TiN nanotubes embedded with exsolved Ru nanoparticles. These Ru-exsolved holey TiN nanotubes exhibit outstanding electrocatalytic activity for the hydrogen evolution reaction with excellent durability, which is significantly higher than that of Ru-deposited TiN nanotubes. The enhanced stability of the Ru-exsolved TiN nanotubes can be attributed to the Ru nanoparticles embedded in the robust metal nitride matrix and the formation of interfacial Ti3+─N─Ru4+ bonds. Density functional theory calculations reveal that the exsolved Ru nanoparticles have a lower d-band center position and optimized hydrogen affinity than deposited Ru nanoparticles, indicating the superior electrocatalyst performance of the former. In situ Raman spectroscopic analysis reveals that the electron transfer from TiN to Ru nanoparticles is enhanced during the electrocatalytic process. The proposed approach opens a new avenue for stabilizing diverse metal nanostructures in many conductive matrices like metal phosphides and chalcogenides.

Crucial Role of Metal Coordination Number in Optimizing Electrocatalyst Activity of Holey Large-Area 2D Ru Nanosheets.

Low-dimensional metal nanostructures have attracted considerable research attention, owing to their potential as catalysts. A controlled reductive phase transition of monolayer RuO2 nanosheets could provide an effective way to produce holey large-area 2D Ru nanosheets with tailored defect structures and metal coordination number. The locally optimized holey Ru metal nanosheet, with a metal coordination number of ∼10.2, exhibited excellent electrocatalytic activity for the hydrogen evolution reaction (HER) with a reduced overpotential of 38 mV in a 1 M KOH electrolyte. The creation of a highly anisotropic holey nanosheet morphology with optimization of local structure was quite effective in developing efficient catalyst materials. The universal importance of controlling the coordination number was confirmed through a comparative study of Ru nanoparticles, which showed optimized HER activity with an identical metal coordination number. The coordination number plays a pivotal role in governing electrocatalytic activity, which could be ascribed to the formation of the most active structure for HER at most 2 defects near active sites (2,2'), resulting in the stabilization of a dihydrogen Ru-(H2) intermediate and the increased contribution of Volmer-Tafel mechanism.