RESUMO
PURPOSE: Sagittal malalignment is a risk factor for mechanical complications after surgery for adult spinal deformity (ASD). Spinal loads, modulated by sagittal alignment, may explain this relationship. The aims of this study were to investigate the relationships between: (1) postoperative changes in loads at the proximal segment and realignment, and (2) absolute postoperative loads and postoperative alignment measures. METHODS: A previously validated musculoskeletal model of the whole spine was applied to study a clinical sample of 205 patients with ASD. Based on clinical and radiographic data, pre-and postoperative patient-specific alignments were simulated to predict loads at the proximal segment adjacent to the spinal fusion. RESULTS: Weak-to-moderate associations were found between pre-to-postop changes in lumbar lordosis, LL (r = - 0.23, r = - 0.43; p < 0.001), global tilt, GT (r = 0.26, r = 0.38; p < 0.001) and the Global Alignment and Proportion score, GAP (r = 0.26, r = 0.37; p < 0.001), and changes in compressive and shear forces at the proximal segment. GAP score parameters, thoracic kyphosis measurements and the slope of upper instrumented vertebra were associated with changes in shear. In patients with T10-pelvis fusion, moderate-to-strong associations were found between postoperative sagittal alignment measures and compressive and shear loads, with GT showing the strongest correlations (r = 0.75, r = 0.73, p < 0.001). CONCLUSIONS: Spinal loads were estimated for patient-specific full spinal alignment profiles in a large cohort of patients with ASD pre-and postoperatively. Loads on the proximal segments were greater in association with sagittal malalignment and malorientation of proximal vertebra. Future work should explore whether they provide a causative mechanism explaining the associated risk of proximal junction complications.
Assuntos
Cifose , Lordose , Fusão Vertebral , Humanos , Adulto , Vértebras Lombares/cirurgia , Estudos Retrospectivos , Lordose/diagnóstico por imagem , Lordose/cirurgia , Cifose/diagnóstico por imagem , Cifose/cirurgia , Pelve , Fusão Vertebral/efeitos adversos , Vértebras Torácicas/diagnóstico por imagem , Vértebras Torácicas/cirurgiaRESUMO
PURPOSE: The interrelations between age-related muscle deterioration (sarcopenia) and vertebral fractures have been suggested based on clinical observations, but the biomechanical relationships have not been explored. The study aim was to investigate the effects of muscle ageing and sarcopenia on muscle recruitment patterns and spinal loads, using musculoskeletal multi-body modelling. METHODS: A generic AnyBody model of the thoracolumbar spine, including > 600 fascicles representing trunk musculature, was used. Several stages of normal ageing and sarcopenia were modelled by reduced strength of erector spinae and multifidus muscles (ageing from 3rd to 6th life decade: ≥ 60% of normal strength; sarcopenia: mild 60%, moderate 48%, severe 36%, very severe 24%), reflecting the reported decrease in cross-sectional area and increased fat infiltration. All other model parameters were kept unchanged. Full-range flexion was simulated using inverse dynamics with muscle optimization to predict spinal loads and muscle recruitment patterns. RESULTS: The muscle changes due to normal ageing (≥ 60% strength) had a minor effect on predicted loads and provoked only slightly elevated muscle activities. Severe (36%) and very severe (24%) stages of sarcopenia, however, were associated with substantial increases in compression (by up to 36% or 318N) at the levels of the upper thoracic spine (T1T2-T5T6) and shear loading (by up to 75% or 176N) along the whole spine (T1T2-L4L5). The muscle activities increased for almost all muscles, up to 100% of their available strength. CONCLUSIONS: The study highlights the distinct and detrimental consequences of sarcopenia, in contrast to normal ageing, on spinal loading and required muscular effort. These slides can be retrieved under Electronic Supplementary Material.
Assuntos
Envelhecimento/fisiologia , Músculos Paraespinais/fisiologia , Sarcopenia/fisiopatologia , Humanos , Modelos Biológicos , Vértebras Torácicas/fisiopatologia , Suporte de Carga/fisiologiaRESUMO
PURPOSE: Proximal junctional kyphosis and failure are frequent complications in adult spinal deformity surgery with long fusion constructs. The aim of this study was to assess the biomechanics of the proximal segment for fusions of various lengths. METHODS: A previously established musculoskeletal model of thoracolumbar spine was used to simulate full-range flexion task for fusions (modeled by introduction of rigid constraints) with lower instrumented vertebrae at L5 or S1 and upper instrumented vertebrae (UIV) at any level above, up to T2. Inverse dynamics simulations with force-dependent kinematics were performed for gradually increasing spinal flexion in order to predict global and segmental range of flexion, maximum passive moment, segmental compression and shear forces, which were compared to the uninstrumented case. RESULTS: For long fusions, with the UIV at T11 or higher, the model predicted an increase in segmental flexion (by 33-860%, or 1.6°-4.7°) and passive moment (by 39-1370%, or 13-31 Nm) at the proximal junction-generally increasing with fusion length. While the maximum shear force was 57-239% (135-283 N) higher for the proximal junction at the upper thorax (UIV at T6 or above), the compression forces were reduced by up to 44% (375 N). CONCLUSIONS: The length of the instrumentation has an important effect on the proximal segment biomechanics. Despite the limitations of the current model, musculoskeletal modeling appears to be a promising and versatile method to support planning of spinal instrumentation surgeries in the future. These slides can be retrieved under Electronic Supplementary Material.
Assuntos
Fenômenos Biomecânicos/fisiologia , Vértebras Lombares , Amplitude de Movimento Articular/fisiologia , Fusão Vertebral , Humanos , Vértebras Lombares/fisiologia , Vértebras Lombares/cirurgia , Modelos Biológicos , Estudos Prospectivos , Fusão Vertebral/métodos , Fusão Vertebral/estatística & dados numéricosRESUMO
Due to lack of reference validation data, the common strategy in characterizing adolescent idiopathic scoliosis (AIS) by musculoskeletal modelling approach consists in adapting structure and parameters of validated body models of adult individuals with physiological alignments. Until now, only static postures have been replicated and investigated in AIS subjects. When aiming to simulate trunk motion, two critical factors need consideration: how distributing movement along the vertebral motion levels (lumbar spine rhythm), and if neglecting or accounting for the contribution of the stiffness of the motion segments (disc stiffness). The present study investigates the effect of three different lumbar spine rhythms and absence/presence of disc stiffness on trunk muscle imbalance in the lumbar region and on intervertebral lateral shear at different levels of the thoracolumbar/lumbar scoliotic curve, during simulated trunk motions in the three anatomical planes (flexion/extension, lateral bending, and axial rotation). A spine model with articulated ribcage previously developed in AnyBody software and adapted to replicate the spinal alignment in AIS subjects is employed. An existing dataset of 100 subjects with mild and moderate scoliosis is exploited. The results pointed out the significant impact of lumbar spine rhythm configuration and disc stiffness on changes in the evaluated outputs, as well as a relationship with scoliosis severity. Unfortunately, no optimal settings can be identified due to lack of reference validation data. According to that, extreme caution is recommended when aiming to adapt models of adult individuals with physiological alignments to adolescent subjects with scoliotic deformity.
Assuntos
Cifose , Escoliose , Adulto , Adolescente , Humanos , Vértebras Lombares/fisiologia , Tronco , Músculos/fisiologiaRESUMO
Musculoskeletal simulations with muscle optimization aim to minimize muscle effort, hence are considered unable to predict the activation of antagonistic muscles. However, activation of antagonistic muscles might be necessary to satisfy the dynamic equilibrium. This study aims to elucidate under which conditions coactivation can be predicted, to evaluate factors modulating it, and to compare the antagonistic activations predicted by the lumbar spine model with literature data. Simple 2D and 3D models, comprising of 2 or 3 rigid bodies, with simple or multi-joint muscles, were created to study conditions under which muscle coactivity is predicted. An existing musculoskeletal model of the lumbar spine developed in AnyBody was used to investigate the effects of modeling intra-abdominal pressure (IAP), linear/cubic and load/activity-based muscle recruitment criterion on predicted coactivation during forward flexion and lateral bending. The predicted antagonist activations were compared to reported EMG data. Muscle coactivity was predicted with simplified models when multi-joint muscles were present or the model was three-dimensional. During forward flexion and lateral bending, the coactivation ratio predicted by the model showed good agreement with experimental values. Predicted coactivation was negligibly influenced by IAP but substantially reduced with a force-based recruitment criterion. The conditions needed in multi-body models to predict coactivity are: three-dimensionality or multi-joint muscles, unless perfect antagonists. The antagonist activations are required to balance 3D moments but do not reflect other physiological phenomena, which might explain the discrepancies between model predictions and experimental data. Nevertheless, the findings confirm the ability of the multi-body trunk models to predict muscle coactivity and suggest their overall validity.
Assuntos
Modelos Biológicos , Músculo Esquelético , Humanos , Músculo Esquelético/fisiologia , Tronco/fisiologia , Vértebras Lombares/fisiologia , Contração Muscular/fisiologia , Eletromiografia , Simulação por Computador , Fenômenos BiomecânicosRESUMO
Abnormal postoperative global sagittal alignment (GSA) is associated with an increased risk of mechanical complications after spinal surgery. Typical assessment of sagittal alignment relies on a few selected measures, disregarding global complexity and variability of the sagittal curvature. The normative range of spinal loads associated with GSA has not yet been considered in clinical evaluation. The study objectives were to develop a new GSA assessment method that holistically describes the inherent relationships within GSA and to estimate the related spinal loads. Vertebral endplates were annotated on radiographs of 85 non-pathological subjects. A Principal Component Analysis (PCA) was performed to derive a Statistical Shape Model (SSM). Associations between identified GSA variability modes and conventional alignment measures were assessed. Simulations of respective Shape Modes (SMs) were performed using an established musculoskeletal AnyBody model to estimate normal variation in cervico-thoraco-lumbar loads. The first six principal components explained 97.96% of GSA variance. The SSM provides the normative range of GSA and a visual representation of the main variability modes. Normal variation relative to the population mean in identified alignment features was found to influence spinal loads, e.g. the lower bound of the second shape mode (SM2-2σ) corresponds to an increase in L4L5-compression by 378.64 N (67.86%). Six unique alignment features were sufficient to describe GSA almost entirely, demonstrating the value of the proposed method for an objective and comprehensive analysis of GSA. The influence of these features on spinal loads provides a normative biomechanical reference, eventually guiding surgical planning of deformity correction in the future.
Assuntos
Análise de Componente Principal , Humanos , Masculino , Feminino , Adulto , Pessoa de Meia-Idade , Coluna Vertebral/fisiologia , Coluna Vertebral/diagnóstico por imagem , Suporte de Carga/fisiologia , Idoso , Vértebras Lombares/fisiologia , Vértebras Lombares/diagnóstico por imagem , Fenômenos Biomecânicos , Modelos BiológicosRESUMO
STUDY DESIGN: A retrospective radiographic and biomechanical analysis of 108 thoracolumbar fusion patients from two clinical centers. OBJECTIVE: This study aimed to determine the validity of a computational framework for predicting postoperative patient posture based on preoperative imaging and surgical data in a large clinical sample. SUMMARY OF BACKGROUND DATA: Short-term and long-term studies on thoracolumbar fusion patients have discussed that a preoperative predictive model would benefit surgical planning and improve patient outcomes. Clinical studies have shown that postoperative alignment changes at the pelvis and intact spine levels may negatively affect postural balance and quality of life. However, it remains challenging to predict such changes preoperatively because of confounding surgical and patient factors. MATERIALS AND METHODS: Patient-specific musculoskeletal models incorporated weight, height, body mass index, age, pathology-associated muscle strength, preoperative sagittal alignment, and surgical treatment details. The sagittal alignment parameters predicted by the simulations were compared with those observed radiographically at a minimum of three months after surgery. RESULTS: Pearson correlation coefficients ranged from r=0.86 to 0.95, and mean errors ranged from 4.1° to 5.6°. The predictive accuracies for postoperative spinopelvic malalignment (pelvic incidence minus lumbar lordosis>10°) and sagittal imbalance parameters (TPA>14°, T9PA>7.4°, or LPA>7.2°) were between 81% and 94%. Patients treated with long fusion (greater than five segments) had relatively lower prediction errors for lumbar lordosis and spinopelvic mismatch than those in the local and short groups. CONCLUSIONS: The overall model performance with long constructs was superior to those of the local (one to two segments) and short (three to four segments) fusion cases. The clinical framework is a promising tool in development to enhance clinical judgment and to help design treatment strategies for predictable surgical outcomes. LEVEL OF EVIDENCE: 3.
Assuntos
Lordose , Fusão Vertebral , Humanos , Lordose/diagnóstico por imagem , Lordose/cirurgia , Vértebras Lombares/diagnóstico por imagem , Vértebras Lombares/cirurgia , Estudos Retrospectivos , Qualidade de Vida , Pelve/diagnóstico por imagem , Pelve/cirurgia , Fusão Vertebral/métodosRESUMO
OBJECTIVE: To describe a study protocol for investigating the functional association between posture, spinal balance, ambulatory biomechanics, paraspinal muscle fatigue, paraspinal muscle quality and symptoms in patients with symptomatic lumbar spinal stenosis (sLSS) before and 1-year after elective surgical intervention. DESIGN: Single-centre prospective, experimental, multimodal (clinical, biomechanical, radiological) study with three instances of data collection: baseline (study visit 1), 6-month follow-up (remote) and 1-year follow-up (study visit 2). Both study visits include an in vivo experiment aiming to elicit paraspinal muscle fatigue for postural assessment in a non-fatigued and fatigued state. EXPERIMENTAL PROTOCOL: At baseline and 1-year follow-up, 122 patients with sLSS will be assessed clinically, perform the back-performance scale assessment and complete several patient-reported outcome measure (PROMs) questionnaires regarding overall health, disease-related symptoms and kinesiophobia. Posture and biomechanical parameters (joint kinematics, kinetics, surface electromyography, back curvature) will be recorded using an optoelectronic system and retroreflective markers during different tasks including overground walking and movement assessments before and after a modified Biering-Sørensen test, used to elicit paraspinal muscle fatigue. Measurements of muscle size and quality and the severity of spinal stenosis will be obtained using magnetic resonance imaging (MRI) and sagittal postural alignment data from EOS radiographies. After each study visit, physical activity level will be assessed during 9 days using a wrist-worn activity monitor. In addition, physical activity level and PROMs will be assessed remotely at 6-month follow-up. CONCLUSION: The multimodal set of data obtained using the study protocol described in this paper will help to expand our current knowledge on the pathophysiology, biomechanics, and treatment outcome of degenerative sLSS. The results of this study may contribute to defining and/or altering patient treatment norms, surgery indication criteria and post-surgery rehabilitation schedules. TRIAL REGISTRATION: The protocol was approved by the regional ethics committee and has been registered at clinicaltrials.gov (NCT05523388).
Assuntos
Estenose Espinal , Humanos , Vértebras Lombares/cirurgia , Atrofia Muscular , Músculos Paraespinais , Estudos Prospectivos , RadiografiaRESUMO
BACKGROUND: Ceramics are used in Total Disc Replacements (1) in articulating surfaces for their wear resistance and biocompatibility and (2) on endplates to promote osseointegration. They furthermore exhibit MRI and CT compatibility. These properties address main challenges associated with non-ceramic Total Disc Replacements i.e. wear, migration and postoperative imaging. While brittleness of ceramics caused fear of fracture in the past, improvements of ceramic materials were made and considerable clinical experience with ceramic Total Disc Replacements was gained. This review aims to assess the evidence on the use of ceramics in Total Disc Replacements and compare safety and effectiveness of ceramic Total Disc Replacements to spinal fusion and Total Disc Replacements in general. METHODS: We conducted a scoping review on the use of ceramics in Total Disc Replacements using Scopus, Web of Science and PubMed. The review includes 36 clinical, ex vivo and nonhuman in vivo, tribological and mechanical studies and case reports. FINDINGS: Ceramics are used in cervical Total Disc Replacements, with safety and efficacy confirmed in clinical studies, with up to 10 and 3.3 years follow-up, for articulation and osseointegration applications, respectively. Clinical evidence shows that ceramic Total Disc Replacements (alike non-ceramic ones) restore segmental motion and result in non-inferior and possibly superior outcomes to spinal fusion. In vivo studies show osseointegration comparable to non-ceramic devices. Tribological studies suggest appropriate wear properties. INTERPRETATION: We found no indications of systematic problems with the use of ceramics in Total Disc Replacements. Ceramics are suitable materials for Total Disc Replacements.
Assuntos
Substituição Total de Disco , Humanos , Projetos de PesquisaRESUMO
A major clinical challenge in adolescent idiopathic scoliosis (AIS) is the difficulty of predicting curve progression at initial presentation. The early detection of progressive curves can offer the opportunity to better target effective non-operative treatments, reducing the need for surgery and the risks of related complications. Predictive models for the detection of scoliosis progression in subjects before growth spurt have been developed. These models accounted for geometrical parameters of the global spine and local descriptors of the scoliotic curve, but neglected contributions from biomechanical measurements such as trunk muscle activation and intervertebral loading, which could provide advantageous information. The present study exploits a musculoskeletal model of the thoracolumbar spine, developed in AnyBody software and adapted and validated for the subject-specific characterization of mild scoliosis. A dataset of 100 AIS subjects with mild scoliosis and in pre-pubertal age at first examination, and recognized as stable (60) or progressive (40) after at least 6-months follow-up period was exploited. Anthropometrical data and geometrical parameters of the spine at first examination, as well as biomechanical parameters from musculoskeletal simulation replicating relaxed upright posture were accounted for as predictors of the scoliosis progression. Predicted height and weight were used for model scaling because not available in the original dataset. Robust procedure for obtaining such parameters from radiographic images was developed by exploiting a comparable dataset with real values. Six predictive modelling approaches based on different algorithms for the binary classification of stable and progressive cases were compared. The best fitting approaches were exploited to evaluate the effect of accounting for the biomechanical parameters on the prediction of scoliosis progression. The performance of two sets of predictors was compared: accounting for anthropometrical and geometrical parameters only; considering in addition the biomechanical ones. Median accuracy of the best fitting algorithms ranged from 0.76 to 0.78. No differences were found in the classification performance by including or neglecting the biomechanical parameters. Median sensitivity was 0.75, and that of specificity ranged from 0.75 to 0.83. In conclusion, accounting for biomechanical measures did not enhance the prediction of curve progression, thus not supporting a potential clinical application at this stage.
RESUMO
Adolescent idiopathic scoliosis (AIS) is a three-dimensional deformity of the spine, the aetiology and pathogenesis of which are poorly understood. Unfortunately, biomechanical data describing trunk muscle activation and intervertebral load, which can contribute to understanding the pathomechanics of the AIS spine, cannot be measured in vivo due to the invasiveness of the procedures. The present study provides the biomechanical characterization of the spinal loads in scoliotic subjects by exploiting musculoskeletal modelling approach, allowing for calculating biomechanical measures in an assigned posture. A spine model with articulated ribcage previously developed in AnyBody software was applied. The predicted outcomes were evaluated in the upright posture, depending on scoliosis severity and curve type, in a population of 132 scoliotic subjects with mild, moderate, and severe scoliosis. Radiographic-based three dimensional reconstruction of vertebral orientations and scaling of body segments and trunk muscle cross-section area guaranteed geometrical subject-specificity. Validation analysis supporting the application of the model was performed. Trunk muscles were found more activated in the convex side of the scoliotic curve, in agreement with reference in vivo measurements, with progressive increase with scoliosis severity. The intervertebral lateral shear was found positively correlated with the severity of the scoliosis, demonstrating that the transferred load is not a priori orthogonal to vertebral endplate in the frontal plane, and thus questioning the assumption of the 'follower load' approach in case of experimental or computational study on the scoliotic spine. The study opens the way for the subject-specific characterization of scoliosis in assigned loading and motion conditions.
Assuntos
Cifose , Escoliose , Adolescente , Humanos , Músculo Esquelético , Postura , Escoliose/diagnóstico por imagem , Coluna VertebralRESUMO
Associations between spinal sagittal balance and pain and disability are well documented. Reciprocal changes after spinal surgery might be critical for the outcomes, but assessing their extent remains a challenge. This paper proposes a method for predicting full-body sagittal alignment including reciprocal changes in response to spinal fusion, based on musculoskeletal modeling and inverse-inverse dynamics approach. An established body model (AnyBody) was used, with fused segments modeled as rigid. Posture was optimized based on muscle expenditure minimization, following the concept of the cone of economy. The data of adult spinal fusion patients were obtained retrospectively from an ongoing clinical study. Patient spino-pelvic alignment, body weight and height, age- and pathology-related muscle deterioration, and underwent treatment details were represented in the model. Predicted postural changes were compared to follow-up radiographs to evaluate method validity. Twenty-one cases were analyzed in this preliminary study (age rangeâ¯=â¯48-74; number of fused segments 1-14). The model predictions correlated well with the radiographic measures at follow-up: TPA, râ¯=â¯0.83; ΔPILL, râ¯=â¯0.90; LL, râ¯=â¯0.90; TK, râ¯=â¯0.77. The model demonstrated high accuracy in predicting sagittal imbalance (positive predictive valueâ¯=â¯1.00, negative predictive valueâ¯=â¯0.75). The presented method for patient- and treatment-specific postoperative posture prediction can be used to guide preoperative planning of spinal fusion, but more extensive validation is needed.
Assuntos
Postura , Fusão Vertebral/efeitos adversos , Coluna Vertebral/fisiologia , Coluna Vertebral/cirurgia , Adulto , Idoso , Feminino , Humanos , Lordose/diagnóstico por imagem , Lordose/etiologia , Masculino , Pessoa de Meia-Idade , Período Pós-Operatório , Radiografia , Estudos RetrospectivosRESUMO
Excessive mechanical loading of the spine is a critical factor in vertebral fracture initiation. Most vertebral fractures develop spontaneously or due to mild trauma, as physiological loads during activities of daily living might exceed the failure load of osteoporotic vertebra. Spinal loading patterns are affected by vertebral kinematics, which differ between elderly and young individuals. In this study, the effects of age-related changes in spine kinematics on thoracolumbar spinal segmental loading during dynamic activities of daily living were investigated using combined experimental and modeling approach. Forty-four healthy volunteers were recruited into two age groups: young (Nâ¯=â¯23, ageâ¯=â¯27.1⯱â¯3.8) and elderly (Nâ¯=â¯21, ageâ¯=â¯70.1⯱â¯3.9). The spinal curvature was assessed with a skin-surface device and the kinematics of the spine and lower extremities were recorded during daily living tasks (flexion-extension and stand-sit-stand) with a motion capture system. The obtained data were used as input for a musculoskeletal model with a detailed thoracolumbar spine representation. To isolate the effect of kinematics on predicted loads, other model properties were kept constant. Inverse dynamics simulations were performed in the AnyBody Modeling System to estimate corresponding spinal loads. The maximum compressive loads predicted for the elderly motion patterns were lower than those of the young for L2/L3 and L3/L4 lumbar levels during flexion and for upper thoracic levels during stand-to-sit (T1/T2-T8/T9) and sit-to-stand (T3/T4-T6/T7). However, the maximum loads predicted for the lower thoracic levels (T9/T10-L1/L2), a common site of vertebral fractures, were similar compared to the young. Nevertheless, these loads acting on the vertebrae of reduced bone quality might contribute to a higher fracture risk for the elderly.
Assuntos
Atividades Cotidianas , Envelhecimento/fisiologia , Vértebras Lombares/fisiologia , Vértebras Torácicas/fisiologia , Adulto , Idoso , Idoso de 80 Anos ou mais , Fenômenos Biomecânicos , Feminino , Humanos , Masculino , Modelos Biológicos , Músculo Esquelético/fisiologia , Amplitude de Movimento Articular/fisiologia , Curvaturas da Coluna Vertebral/fisiopatologia , Suporte de Carga/fisiologia , Adulto JovemRESUMO
In contrast to the cervical and lumbar region, the normal kinematics of the thoracic spine have not been thoroughly investigated. The aim of this study was to characterize normal multi-segmental continuous motion of the whole thoracolumbar spine, during a flexion maneuver, in young and elderly subjects. Forty-two healthy volunteers were analyzed: 21 young (age=27.00±3.96) and 21 elderly (age=70.1±3.85). Spinal motion was recorded with a motion-capture system and analyzed using a 3rd order polynomial function to approximate spinal curvature throughout the motion sequence. The average motion profiles of the two age groups were characterized. Flexion timing of the thoracic region of the spine, as compared to the lumbar spine and hips, was found to be different in the two age groups (p=0.011): a delayed/sequential motion type was observed in most of the young, whereas mostly a simultaneous motion pattern was observed in the elderly subjects. A similar trend was observed in flexion of the lower thoracic segments (p=0.017). Differences between age groups were also found for regional and segmental displacements and velocities. The reported characterization of the thoracic spine kinematics may in the future support identification of abnormal movement or be used to improve biomechanical models of the spine.
Assuntos
Amplitude de Movimento Articular/fisiologia , Doenças da Coluna Vertebral/fisiopatologia , Adulto , Idoso , Idoso de 80 Anos ou mais , Análise de Variância , Fenômenos Biomecânicos/fisiologia , Feminino , Quadril/fisiologia , Humanos , Vértebras Lombares/fisiopatologia , Masculino , Adulto JovemRESUMO
Most studies investigating trunk kinematics have not provided adequate quantification of spinal motion, resulting in a limited understanding of the healthy spine's biomechanical behavior during gait. This study aimed at assessing spinal motion during gait in adolescents, adults and older individuals. Fourteen adolescents (10-18years), 13 adults (19-35years) and 15 older individuals (≥65years) were included. Using a previously validated enhanced optical motion capture approach, sagittal and frontal plane spinal curvature angles and general trunk kinematics were measured during shod walking at a self-selected normal speed. Postural differences indicated that lumbar lordosis and thoracic kyphosis increase throughout adolescence and reach their peak in adulthood. The absence of excessive thoracic kyphosis in older individuals could be explained by a previously reported subdivision in those who develop excessive kyphosis and those who maintain their curve. Furthermore, adults displayed increased lumbar spine range of motion as compared to the adolescents, whereas the increased values in older individuals were found to be related to higher gait speeds. This dataset on the age-related kinematics of the healthy spine can serve as a basis for understanding pathological deviations and monitoring rehabilitation progression.
Assuntos
Marcha , Vértebras Lombares/fisiologia , Vértebras Torácicas/fisiologia , Adolescente , Adulto , Idoso , Fenômenos Biomecânicos , Criança , Feminino , Voluntários Saudáveis , Humanos , Masculino , Postura , Amplitude de Movimento Articular , Reabilitação/métodos , Sapatos , Tronco , Caminhada , Velocidade de Caminhada , Adulto JovemRESUMO
Musculoskeletal modeling offers an invaluable insight into the spine biomechanics. A better understanding of thoracic spine kinetics is essential for understanding disease processes and developing new prevention and treatment methods. Current models of the thoracic region are not designed for segmental load estimation, or do not include the complex construct of the ribcage, despite its potentially important role in load transmission. In this paper, we describe a numerical musculoskeletal model of the thoracolumbar spine with articulated ribcage, modeled as a system of individual vertebral segments, elastic elements and thoracic muscles, based on a previously established lumbar spine model and data from the literature. The inverse dynamics simulations of the model allow the prediction of spinal loading as well as costal joints kinetics and kinematics. The intradiscal pressure predicted by the model correlated well (R(2)=0.89) with reported intradiscal pressure measurements, providing a first validation of the model. The inclusion of the ribcage did not affect segmental force predictions when the thoracic spine did not perform motion. During thoracic motion tasks, the ribcage had an important influence on the predicted compressive forces and muscle activation patterns. The compressive forces were reduced by up to 32%, or distributed more evenly between thoracic vertebrae, when compared to the predictions of the model without ribcage, for mild thoracic flexion and hyperextension tasks, respectively. The presented musculoskeletal model provides a tool for investigating thoracic spine loading and load sharing between vertebral column and ribcage during dynamic activities. Further validation for specific applications is still necessary.
Assuntos
Vértebras Lombares/fisiologia , Vértebras Torácicas/fisiologia , Fenômenos Biomecânicos , Simulação por Computador , Humanos , Vértebras Lombares/anatomia & histologia , Região Lombossacral/anatomia & histologia , Região Lombossacral/fisiologia , Modelos Anatômicos , Músculo Esquelético , Pressão , Amplitude de Movimento Articular , Costelas/anatomia & histologia , Costelas/fisiologia , Vértebras Torácicas/anatomia & histologia , Suporte de Carga , Articulação Zigapofisária/anatomia & histologia , Articulação Zigapofisária/fisiologiaRESUMO
A number of musculoskeletal models of the human spine have been used for predictions of lumbar and muscle forces. However, the predictive power of these models might be limited by a commonly made assumption; thoracic region is represented as a single lumped rigid body. This study hence aims to investigate the impact of such assumption on the predictions of spinal and muscle forces. A validated thoracolumbar spine model was used with a flexible thorax (T1-T12), a completely rigid one or rigid with thoracic posture updated at each analysis step. The simulations of isometric forward flexion up to 80°, with and without a 20kg hand load, were performed, based on the previously measured kinematics. Depending on the simulated task, the rigid model predicted slightly or moderately lower compressive loading than the flexible one. The differences were relatively greater at the upper lumbar levels (average underestimation of 14% at the T12L1 for flexion tasks and of 18% for flexion tasks with hand load) as compared to the lower levels (3% and 8% at the L5S1 for unloaded and loaded tasks, respectively). The rigid model with updated thoracic posture predicted compressive forces similar to those of the rigid model. Predicted muscle forces were, however, very different between the three models. This study indicates that the lumbar spine models with a rigid thorax definition can be used for loading investigations at the lowermost spinal levels. For predictions of upper lumbar spine loading, using models with an articulated thorax is advised.
Assuntos
Vértebras Lombares/fisiologia , Músculo Esquelético/fisiologia , Postura/fisiologia , Tórax/fisiologia , Adulto , Fenômenos Biomecânicos , Humanos , Modelos Biológicos , Amplitude de Movimento Articular/fisiologia , Vértebras Torácicas/fisiologia , Tronco/fisiologia , Suporte de Carga/fisiologia , Adulto JovemRESUMO
BACKGROUND AND PURPOSE: In clinical diagnosis, medical image segmentation plays a key role in the analysis of pathological regions. Despite advances in automatic and semi-automatic segmentation techniques, time-effective correction tools are commonly needed to improve segmentation results. Therefore, these tools must provide faster corrections with a lower number of interactions, and a user-independent solution to reduce the time frame between image acquisition and diagnosis. METHODS: We present a new interactive method for correcting image segmentations. Our method provides 3D shape corrections through 2D interactions. This approach enables an intuitive and natural corrections of 3D segmentation results. The developed method has been implemented into a software tool and has been evaluated for the task of lumbar muscle and knee joint segmentations from MR images. RESULTS: Experimental results show that full segmentation corrections could be performed within an average correction time of 5.5±3.3 minutes and an average of 56.5±33.1 user interactions, while maintaining the quality of the final segmentation result within an average Dice coefficient of 0.92±0.02 for both anatomies. In addition, for users with different levels of expertise, our method yields a correction time and number of interaction decrease from 38±19.2 minutes to 6.4±4.3 minutes, and 339±157.1 to 67.7±39.6 interactions, respectively.
Assuntos
Aumento da Imagem/métodos , Imageamento Tridimensional/métodos , Articulação do Joelho/diagnóstico por imagem , Imageamento por Ressonância Magnética , Músculo Esquelético/diagnóstico por imagem , Humanos , Região Lombossacral/diagnóstico por imagemRESUMO
In the clinical environment, accuracy and speed of the image segmentation process plays a key role in the analysis of pathological regions. Despite advances in anatomic image segmentation, time-effective correction tools are commonly needed to improve segmentation results. Therefore, these tools must provide faster corrections with a low number of interactions, and a user-independent solution. In this work we present a new interactive correction method for correcting the image segmentation. Given an initial segmentation and the original image, our tool provides a 2D/3D environment, that enables 3D shape correction through simple 2D interactions. Our scheme is based on direct manipulation of free form deformation adapted to a 2D environment. This approach enables an intuitive and natural correction of 3D segmentation results. The developed method has been implemented into a software tool and has been evaluated for the task of lumbar muscle segmentation from Magnetic Resonance Images. Experimental results show that full segmentation correction could be performed within an average correction time of 6±4 minutes and an average of 68±37 number of interactions, while maintaining the quality of the final segmentation result within an average Dice coefficient of 0.92±0.03.