Beyond the Conventional Limitation of Photocycloaddition Reaction in the Roomy Nanospace of a Metal-Organic Framework.

Topochemical reactions provide selective products based on the molecular position; however, they generally require molecules to be placed in strictly limited orientations and distances, making them less versatile. In this study, we found that by confining trans-4-styrylpyridine (4-spy) as a reactive substrate in a flexible metal-organic framework (MOF) nanospace, [2+2] cycloadducts can be selectively obtained, even when the distance between two C═C bonds of 4-spy in the crystal is 5.9 Å, which is much larger than the conventionally observed upper limit (4.2 Å). Such an unusual cyclization reaction is suggested to occur due to the transient proximity of the 4-spy due to the "swing" motion in the nanospace. The MOF nanospace, with its high degree of molecular structural freedom, can be applied to different platforms that do not require the fine constraints of reactive distances for solid-phase reactions.

Porous Mn2+ Magnet with a Pt-Cl Framework: Correlation between Water Vapor Adsorption/Desorption and Slow Magnetic Relaxation.

We report the water adsorption/desorption behavior and dynamic magnetic properties of the Pt-Cl chain complex [{[Pt(en)2 ][PtCl2 (en)2 ]}3 ][{(MnCl5 )Cl3 }2 ] ⋅ 12H2 O (1). Upon heating 1 in a vacuum, we obtained the dehydrated form [{[Pt(en)2 ][PtCl2 (en)2 ]}3 ][{(MnCl5 )Cl3 }2 ] (1DH). The framework structures of 1 and 1DH are identical, and both complexes underwent slow magnetic relaxation. However, the magnetic relaxation times for 1DH were shorter than those for 1, meaning that the dynamic magnetic properties were controlled upon water vapor adsorption/desorption. From detailed analyses of the dynamic magnetic behavior, a phonon-bottleneck effect contributes to the magnetic relaxation processes. We discuss the mechanism for the changes in the magnetic relaxation processes upon dehydration in terms of the heat capacity and thermal conductivity.

Single-Crystal Structures of Benzenehexathiol and Its Disulfide Forms.

Oligothiols are useful as building blocks in the construction of disulfide-based macrocycles and polymers or as ligands for coordination polymers. Above all, benzenehexathiol (BHT) is a particularly important molecule, as it is used to construct conductive two-dimensional MOFs. Despite the desire to clarify its structure and isolate it to high purity, the chemical instability of BHT has hampered single-crystal X-ray structure analysis of intact BHT. In addition, the synthesis of discrete disulfide molecules of BHT has not been reported. Here, we succeed in obtaining the single crystals of intact BHT, which is analyzed by single crystal X-ray structure analysis. Furthermore, the structures of a group of molecules with intermolecular disulfide bonds (BHT·4im and BHT2·2TBA, im = imidazole, TBA = tetrabutylammonium cation) obtained by processing BHT in the presence of bases are determined.

Quinoid-Based Three-Dimensional Metal-Organic Framework Fe2(dhbq)3: Porosity, Electrical Conductivity, and Solid-State Redox Properties.

We report the synthesis, characterization, and electronic properties of the quinoid-based three-dimensional metal-organic framework [Fe2(dhbq)3]. The MOF was synthesized without using cations as a template, unlike other reported X2dhbq3-based coordination polymers, and the crystal structure was determined by using single-crystal X-ray diffraction. The crystal structure was entirely different from the other reported [Fe2(X2dhbq3)]2-; three independent 3D polymers were interpenetrated to give the overall structure. The absence of cations led to a microporous structure, investigated by N2 adsorption isotherms. Temperature dependence of electrical conductivity data revealed that it exhibited a relatively high electrical conductivity of 1.2 × 10-2 S cm-1 (Ea = 212 meV) due to extended d-π conjugation in a three-dimensional network. Thermoelectromotive force measurement revealed that it is an n-type semiconductor with electrons as the majority of charge carriers. Structural characterization and spectroscopic analyses, including SXRD, Mössbauer, UV-vis-NIR, IR, and XANES measurements, evidenced the occurrence of no mixed valency based on the metal and the ligand. [Fe2(dhbq)3] upon incorporating as a cathode material for lithium-ion batteries engendered an initial discharge capacity of 322 mAh/g.

Observation of slow magnetic relaxation phenomena in spatially isolated π-radical ions.

The use of molecular spins as quantum bits is fascinating because it offers a wide range of strategies through chemical modifications. In this regard, it is very interesting to search for organic radical ions that have small spin-orbit coupling values. On the other hand, the feature of the magnetic relaxation of π-organic radical ions is rarely exploited due to the difficulty of spin dilution, and π-stacking interaction. In this study, we focus on N,N',N''-tris(2,6-dimethylphenyl)benzenetriimide (BTI-xy), where three xylene moieties connected to the imide groups cover the π-plane of the BTI core. As a result, BTI-xy radical anions without π-stacking interaction were obtained. This led to the slow magnetization relaxation, which is reported for the first time in organic radicals. Furthermore, the relaxation times in a solution state revealed the importance of spin interaction.

Benzenetriimide-Based Molecular Conductor with Antiferro- to Ferromagnetic Switching Induced by Structural Change of π-stacked Array.

Benzenetriimide (BTI) is a promising building block for materials chemistry due to its characteristic 3-fold symmetry and redox properties, whereas little is known about its conductive and magnetic properties. In this study, we synthesized three charge-transfer complexes based on N,N',N''-trimethylbenzenetriimide (BTI-Me). One of the complexes contains isolated dimers of BTI-Me radical anion (BTI-Me⋅- ), while the other two have the infinite π-stacked array of BTI-Me with the formal charge of -0.5. The latter two complexes did not show metallic behavior but showed semiconducting behavior probably due to the characteristic insulation in one-dimensional electron system, so-called charge ordering and dimer-Mott insulation. The magnetic susceptibility of the complex in dimer-Mott state exhibits an unusual transition from antiferromagnetic to ferromagnetic spin states with the hysteresis loop of 15 K derived from the structural phase transition around 130 K. These properties were also supported by DFT calculations.

Elucidating 2D Charge-Density-Wave Atomic Structure in an MX-Chain by the 3D-ΔPair Distribution Function Method.

The front cover artwork is provided by Prof. Masahiro Yamashita's group at Tohoku University and designed by Dr. Laurent Guérin at University of Rennes 1. The image illustrates that the atomic structure of a 2D charge density wave can be revealed although the planes associated to this local 2D order are randomly stacked preventing the use of conventional structure determination techniques. Read the full text of the Research Article at 10.1002/cphc.202100857.

Elucidating 2D Charge-Density-Wave Atomic Structure in an MX-Chain by the 3D-ΔPair Distribution Function Method.

Many solids, particularly low-dimensional systems, exhibit charge density waves (CDWs). In one dimension, charge density waves are well understood, but in two dimensions, their structure and their origin are difficult to reveal. Herein, the 2D charge-density-wave atomic structure and stabilization mechanism in the bromide-bridged Pd compound [Pd(cptn)2 Br]Br2 (cptn=1R,2R-diaminocyclopentane) is investigated by means of single-crystal X-ray diffraction employing the 3D-Δpair distribution function (3D-ΔPDF) method. Analysis of the diffuse scattering using 3D-ΔPDF shows that a 2D-CDW is stabilized by a hydrogen-bonding network between Br- counteranion and the amine (NH2 ) group of the cptn in-plane ligand, and that 3D ordering is prevented due to a weak plane to plane correlation. We extract the effective displacements of the atoms describing the atomic structure quantitatively and discuss the stabilization mechanism of the 2D-CDW. Our study provides a method to identify and measure the key interaction responsible for the dimensionality and stability of the CDW that can help further progress of rational design.

Bromine Vapor Induced Continuous p- to n-Type Conversion of a Semiconductive Metal-Organic Framework Cu[Cu(pdt)2].

Guest-promoted modulation of the electronic states in metal-organic frameworks (MOFs) has brought about a new field of interdisciplinary research, including host-guest chemistry and solid-state physics. Although there are dozens of studies on guest-promoted enhancement of the electrical conductivity properties, including stoichiometry, conductive carriers and structure-property relationships have been scarcely studied in detail. Herein, we studied the effects of continuous and controlled bromine vapor doping on structural, optical, thermoelectric, and semiconducting properties of Cu[Cu(pdt)2] (pdt = 2,3-pyrazinedithiolate) as a function of bromine stoichiometry. We demonstrated that the same material could act as both p- and n-type semiconductors by tuning the stoichiometry of Br doped in Brx@Cu[Cu(pdt)2], and a change in the charge-carrier type from holes in pristine MOF to electrons upon bromine vapor doping was observed. Bromine molecules acted as an oxidant, causing the selective oxidation of [CuII(pdt)2] in the host framework. In addition, a redox hopping pathway between the partially oxidized CuII/CuIII center contributed to the enhancement of the electrical conductivity of the MOF.

Ni(III) Mott-Hubbard-like State Containing High-Spin Ni(II) in a Semiconductive Bromide-Bridged Ni-Chain Compound.

Halogen-bridged linear chain metal complexes (MX-Chains) are fascinating compounds that have a quasi-one-dimensional (1D) electronic system. In this study, we synthesized the first Ni-based MX-Chain compound having hydroxy groups, i.e., [Ni(dabdOH)2Br]Br2·[Ni(dabdOHx)2Br]0.5·(2-PrOH)0.25·(MeOH)0.25 (1·solvent, x = ∼0.6, dabdOH = (2S,3S)-2,3-diaminobutane-1,4-diol). Single-crystal X-ray diffraction revealed that the MX-Chains in 1·solvent formed sheets and single-chain structures in the superlattice. It suggested an MH-like state, whereas the polarized reflection and Raman spectra suggested a CDW-like state. Magnetic and electron spin resonance measurements revealed that both high-spin Ni(II) (∼15%) and low-spin Ni(III) (∼85%) sites are present in the chain structures, i.e., the metal sites show mixed valency. Therefore, we concluded that 1·solvent adopts an intermediate state between the MH and CDW states. Moreover, a single crystal of 1·solvent exhibited semiconductive characteristics along the chain direction. This finding represents a new structural and electronic state of 1D electronic systems as well as MX-Chains.

Hydrogen Bonding Propagated Phase Separation in Quasi-Epitaxial Single Crystals: A Pd-Br Molecular Insulator.

In condensed matter, phase separation is strongly related to ferroelasticity, ferroelectricity, ferromagnetism, electron correlation, and crystallography. These ferroics are important for nano-electronic devices such as non-volatile memory. However, the quantitative information regarding the lattice (atomic) structure at the border of phase separation is unclear in many cases. Thus, to design electronic devices at the molecular level, a quantitative electron-lattice relationship must be established. Herein, we elucidated a PdII-PdIV/PdIII-PdIII phase transition and phase separation mechanism for [Pd(cptn)2Br]Br2 (cptn = 1R,2R-diaminocyclopentane), propagated through a hydrogen-bonding network. Although the Pd···Pd distance was used to determine the electronic state, the differences in the Pd···Pd distance and the optical gap between Mott-Hubbard (MH) and charge-density-wave (CDW) states were only 0.012 Å and 0.17 eV, respectively. The N-H···Br···H-N hydrogen-bonding network functioned as a jack, adjusting the structural difference dynamically, and allowing visible ferroelastic phase transition/separation in a fluctuating N2 gas flow. Additionally, the effect of the phase separation on the spin susceptibility and electrical conductivity were clarified to represent the quasi-epitaxial crystals among CDW-MH states. These results indicate that the phase transitions and separations could be controlled via atomic and molecular level modifications, such as the addition of hydrogen bonding.

Thermally induced electron-hole dissociation dynamics in quasi-one-dimensional bromo-bridged palladium(III) Mott-insulator [Pd(en)2Br](Suc-Cn)2·H2O (Cn-Y = dialkylsulfosuccinate; n = 5 and 6).

Current-voltage characteristics and dielectric properties were studied in bromo-bridged one-dimensional compounds, [Pd(en)2Br](Suc-C5)2·H2O, exhibiting mixed-valence and averaged valence (MV-AV) phase transition. In the AV phase, clear nonlinear current-voltage characteristics were observed. This phenomenon was explained by the thermally induced electron-hole separation assisted by an electric field. This mechanism was supported by the dielectric properties of [Pd(en)2Br](Suc-Cn)2·H2O (n = 5 and 6).

Simultaneous Spin-Crossover Transition and Conductivity Switching in a Dinuclear Iron(II) Coordination Compound Based on 7,7',8,8'-Tetracyano-p-quinodimethane.

The reaction of Fe(OAc)2 and Hbpypz with neutral TCNQ results in the formation of [Fe2 (bpypz)2 (TCNQ)2 ](TCNQ)2 (1), in which Hbpypz=3,5-bis(2-pyridyl)pyrazole and TCNQ=7,7',8,8'-tetracyano-p-quinodimethane. Crystal packing of 1 with uncoordinated TCNQ and π-π stacking of bpypz- ligands produces an extended two-dimensional supramolecular coordination assembly. Temperature dependence of the dc magnetic susceptibility and heat capacity measurements indicate that 1 undergoes an abrupt spin crossover (SCO) with thermal spin transition temperatures of 339 and 337 K for the heating and cooling modes, respectively, resulting in a thermal hysteresis of 2 K. Remarkably, the temperature dependence of dc electrical transport exhibits a transition that coincides with thermal SCO, demonstrating the thermally induced magnetic and electrical bistability of 1, strongly correlating magnetism with electrical conductivity. This outstanding feature leads to thermally induced simultaneous switching of magnetism and electrical conductivity and a magnetoresistance effect.

Simultaneous Spin-Crossover Transition and Conductivity Switching in a Dinuclear Iron(II) Coordination Compound Based on 7,7',8,8'-Tetracyano-p-quinodimethane.

Invited for the cover of this issue are Ryuta Ishikawa and Satoshi Kawata at Fukuoka University and co-workers at Osaka University, Tohoku University, and Kumamoto University, Japan, collaborating within the research project "SOFT CRYSTALS". The image depicts the thermally induced simultaneous switching of magnetism and electrical conductivity in a two-dimensional supramolecular architecture composed of dinuclear FeII spin-crossover complexes and partially charged 7,7',8,8'-tetracyano-p-quinodimethanide radicals. 10.1002/chem.201903934.

Porous Molecular Conductor: Electrochemical Fabrication of Through-Space Conduction Pathways among Linear Coordination Polymers.

The first porous molecular conductor (PMC), which exhibits porosity, a through-space conduction pathway and rich charge carriers (electrons), was prepared through electrocrystallization from Cd2+ and N, N'-di(4-pyridyl)-1,4,5,8-naphthalenetetracarboxdiimide (NDI-py). [Cd(NDI-py)(OH2)4](NO3)1.3±0.1· nDMA (PMC-1) was assembled by π-π stacking among one-dimensional (1D) linear coordination polymers. The NDI cores were partially reduced into radical anions to form conductive π-stacked columns, yielding (1.0-3.3) × 10-3 S cm-1 at room temperature. Moreover, the electrical conductivity was significantly enhanced by removing the solvent molecules from PMC-1, indicating that PMCs are promising as molecule-responsive conductive materials.

Organic-Inorganic Hybrid Gold Halide Perovskites: Structural Diversity through Cation Size.

Crystal structures of a series of organic-inorganic hybrid gold iodide perovskites, formulated as A2 [AuI I2 ][AuIII I4 ] [A=methylammonium (MA) (1) and formamidinium (FA) (2)], A'2 [I3 ]1-x [AuI I2 ]x [AuIII I4 ] [A'=imidazolium (IMD) (3), guanidinium (GUA) (4), dimethylammonium (DMA) (5), pyridinium (PY) (6), and piperizinium (PIP) (7)], systematically changed depending on the cation size. In addition, triiodide (I3 - ) ions were partly incorporated into the AuI2 - sites of 3-7, whereas they were not incorporated into those of 1 and 2. Such a difference comes from the size of the organic cation. Optical absorption spectra showed characteristic intervalence charge-transfer bands from AuI to AuIII species, and the optical band gap increased as the size of the cation became larger.

MX-Chain Compounds with ReO4 Counterions: Exploration of the Robin-Day Class I-II Boundary.

MX chains have been widely studied as a 1D mixed-valence system. Although there have been a large number of studies on the boundary between class II and III materials of the Robin-Day classification, there are few studies of compounds at the boundary between classes I and II. In this study, we synthesized a series of Pt- and Pd- MX-chain compounds with perrhenate counterions, [M(en)2][M(en)2X2](ReO4)4 (X = Br for M = Pd and X = Cl, Br, and I for M = Pt). All compounds were isostructural, and the metal-metal distances within the chain exceed 6 Å, which is the longest among MX-chain compounds thus far reported. For [Pt(en)2][Pt(en)2Cl2](ReO4)4 (PtCl), an intervalence charge transfer (IVCT) transition was observed in the UV region at 335 nm (3.7 eV), which is the shortest wavelength for the MX-chain compounds thus far reported, indicating that PtCl is the closest to the Robin-Day class I limit.

Correlation between Chemical and Physical Pressures on Charge Bistability in [Pd(en)2Br](Suc-Cn)2·H2O.

Hydrostatic (physical) pressure effects on the electrical resistivity of a bromido-bridged palladium compound, [Pd(en)2Br](Suc-C5)2·H2O, were studied. The charge-density-wave to Mott-Hubbard phase transition temperature (TPT) steadily increased with pressure. By a comparison of the effects of the chemical and physical pressures on TPT, it was estimated that the chemical pressure by unit alkyl chain length, i.e., the number of carbon atoms in the alkyl chains within the counterion, corresponded to ca. 1.3 kbar of the physical pressure.

Multiple-Hydrogen-Bond Approach to Uncommon Pd(III) Oxidation State: A Pd-Br Chain with High Conductivity and Thermal Stability.

A Br-bridged Pd chain complex with the Pd ion in an uncommon +3 oxidation state, [Pd(dabdOH)2Br]Br2 (3), was prepared using a new method involving multiple hydrogen bonds. The PdBr chain complex exhibited superior electrical conductivity and thermal stability. An in-plane ligand with an additional hydrogen donor group (hydroxy group), (2S,3S)-2,3-diaminobutane-1,4-diol (dabdOH), was used to create a multiple-hydrogen-bond network, which effectively shrinks the Pd-Br-Pd distance, stabilizing the Pd(III) state up to its decomposition temperature (443 K). 3 shows semiconducting behavior with quite high electrical conductivity (3-38 S cm-1 at room temperature), which is 106 times larger than the previous record for analogous PdBr chains. Indeed, 3 is the most conductive MX-type chain complex reported so far. The precise positional control of ions via a multiple-hydrogen-bond network is a useful method for controlling the electronic states, thermal stability and conductivity of linear coordination polymers.

Photoresponsive Nanosheets of Polyoxometalates Formed by Controlled Self-Assembly Pathways.

Anionic Keggin polyoxometalates (POMs) and ether linkage-enriched ammonium ions spontaneously self-assemble into rectangular ultrathin nanosheets in aqueous media. The structural flexibility of the cation is essential to form oriented nanosheets; as demonstrated by single-crystal X-ray diffraction measurements. The difference in initial conditions exerts significant influence on selecting for self-assembly pathways in the energy landscape. Photoillumination of the POM sheets in pure water causes dissolution of reduced POMs, which allowed site-specific etching of nanosheets using laser scanning microscopy. By contrast, photoetching was suppressed in aqueous AgNO3 and site-selective deposition of silver nanoparticles occurred as a consequence of electron transfer from the photoreduced POMs to Ag+ ions on the nanosheet surface.