RESUMO
There is a rising need to create high-performing, affordable electrocatalysts in the new field of oxygen electrochemistry. Here, a cost-effective, activity-modulated electrocatalyst with the capacity to trigger both the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER) in an alkaline environment is presented. The catalyst (Al, Co/N-rGCNT) is made up of aluminium, nitrogen-dual-doped reduced graphene oxide sheets co-existing with cobalt-encapsulated carbon nanotube units. Based on X-ray Absorption Spectroscopy (XAS) studies, it is established that the superior reaction kinetics in Al, Co/N-rGCNT over their bulk counterparts can be attributed to their electronic regulation. The Al, Co/N-rGCNT performs as a versatile bifunctional electrocatalyst for zinc-air battery (ZAB), delivering an open circuit potential ≈1.35 V and peak power density of 106.3 mW cm-2, which are comparable to the system based on Pt/C. The Al, Co/N-rGCNT-based system showed a specific capacity of 737 mAh gZn -1 compared to 696 mAh gZn -1 delivered by the system based on Pt/C. The DFT calculations indicate that the adsorption of Co in the presence of Al doping in NGr improves the electronic properties favoring ORR. Thus, the Al, Co/N-rGCNT-based rechargeable ZAB (RZAB) emerges as a highly viable and affordable option for the development of RZAB for practical applications.
RESUMO
The rational design of noble metal-free electrocatalysts holds great promise for cost-effective green hydrogen generation through water electrolysis. In this context, here, the development of a superhydrophilic bifunctional electrocatalyst that facilitates both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline conditions is demonstrated. This is achieved through the in situ growth of hierarchical NiMoO4 @CoMoO4 ·xH2 O nanostructure on nickel foam (NF) via a two-step hydrothermal synthesis method. NiMoO4 @CoMoO4 ·xH2 O/NF facilitates OER and HER at the overpotentials of 180 and 220 mV, respectively, at the current density of 10 mA cm-2 . The NiMoO4 @CoMoO4 ·xH2 O/NF Ç NiMoO4 @CoMoO4 ·xH2 O/NF cell can be operated at a potential of 1.60 V compared to 1.63 V displayed by the system based on the Pt/C@NFÇRuO2 @NF standard electrode pair configuration at 10 mA cm-2 for overall water splitting. The density functional theory calculations for the OER process elucidate that the lowest ΔG of NiMoO4 @CoMoO4 compared to both Ni and NiMoO4 is due to the presence of Co in the OER catalytic site and its synergistic interaction with NiMoO4 . The preparative strategy and mechanistic understanding make the windows open for the large-scale production of the robust and less expensive electrode material for the overall water electrolysis.
RESUMO
Hydrogen production is vital for meeting future energy demands and managing environmental sustainability. Electrolysis of water is considered as the suitable method for H2 generation in a carbon-free pathway. Herein, the synthesis of highly efficient Co9 S8 -Ni3 S2 based hierarchical nanoflower arrays on nickel foam (NF) is explored through the one-pot hydrothermal method (Co9 S8 -Ni3 S2 /NF) for overall water splitting applications. The nanoflower arrays are self-supported on the NF without any binder, possessing the required porosity and structural characteristics. The obtained Co9 S8 -Ni3 S2 /NF displays high hydrogen evolution reaction (HER), as well as oxygen evolution reaction (OER), activities in 1 m KOH solution. The overpotentials exhibited by this system at 25â mA cm-2 are nearly 277 and 102â mV for HER and OER, respectively, in 1 m KOH solution. Subsequently, the overall water splitting was performed in 1 m KOH solution by employing Co9 S8 -Ni3 S2 /NF as both the anode and cathode, where the system required only 1.49, 1.60, and 1.69â V to deliver the current densities of 10, 25, and 50â mA cm-2 , respectively. Comparison of the activity of Co9 S8 -Ni3 S2 /NF with the state-of-the-art Pt/C and RuO2 coated on NF displays an enhanced performance for Co9 S8 -Ni3 S2 /NF both in the half-cell as well as in the full cell, emphasizing the significance of the present work. The post analysis of the material after water electrolysis confirms that the surface Co(OH)2 formed during the course of the reaction serves as the favorable active sites. Overall, the activity modulation achieved in the present case is attributed to the presence of the open-pore morphology of the as formed nanoflowers of Co9 S8 -Ni3 S2 on NF and the simultaneous presence of the surface Co(OH)2 along with the highly conducting Co9 S8 -Ni3 S2 core, which facilitates the adsorption of the reactants and subsequently its conversion into the gaseous products during water electrolysis.
RESUMO
Proton-exchange membrane fuel cells are promising energy devices for a sustainable future due to green features, high power density, and mild operating conditions. A facile proton-conducting membrane plays a pivotal role to boost the efficiency of fuel cells, and hence focused research in this area is highly desirable. Major issues associated with the successful example of Nafion resulted in the search for alternate proton conducting materials. Even though proton carrier loaded crystalline porous organic frameworks have been used for proton-conduction, the weak host-guest interactions limited their practical use. Herein, we developed a crystalline 2D-polymer composed of benzimidazole units as the integral part, prepared by the condensation of aryl acid and diamine in polyphosphoric acid medium. The imidazole linked-2D-polymer exhibits ultrahigh proton conductivity (3.2 × 10-2 S cm-1) (at 95% relative humidity and 95 °C) in the pristine state, which is highest among the undoped porous organic frameworks so far reported. The present strategy of a crystalline proton-conducting 2D-polymer will lead to the development of new high performing crystalline solid proton conductor.
RESUMO
Utilization of the robust metal-carbonate backbone in a series of water-stable, anionic frameworks has been harnessed for the function of highly efficient solid-state ion-conduction. The compact organization of hydrophilic guest ions facilitates water-assisted ion-conduction in all the compounds. The dense packing of the compounds imparts high ion-conducting ability and minimizes the possibility of fuel crossover, making this approach promising for design and development of compounds as potential components of energy devices. This work presents the first report of evaluating ion-conduction in a purely metal-carbonate framework, which exhibits high ion-conductivity on the order of 10-2 S cm-1 along with very low activation energy, which is comparable to highly conducting well-known crystalline coordination polymers or commercialized organic polymers like Nafion.
RESUMO
Semiconductor nanoparticles surface modified with organic molecules capable of visible light absorption and effectively transferring the electrons to the catalytic sites have the potential to be good photocatalysts. ZnO nanoparticles of size â¼3 nm are grafted with two azonaphthols, one conjugated and the other non-conjugated. The photophysical properties of modified ZnO indicate an effective electron transfer from the conjugated azonaphthol to ZnO but not in the case of the non-conjugated molecule. It is also observed from lifetime studies that the conjugated molecule stabilises the defect sites on ZnO nanoparticles. It is possible that excited electrons from the conjugated molecule are transferred to specific defect sites in ZnO. This apparently does not occur in the non-conjugated molecule, bringing to focus the importance of the photophysical characteristics of organic modifiers in designing visible light active photocatalysts.
RESUMO
Two porous hydrogen-bonded organic frameworks (HOFs) based on arene sulfonates and guanidinium ions are reported. As a result of the presence of ionic backbones appended with protonic source, the compounds exhibit ultra-high proton conduction values (σ) 0.75× 10(-2) â S cm(-1) and 1.8×10(-2) â S cm(-1) under humidified conditions. Also, they have very low activation energy values and the highest proton conductivity at ambient conditions (low humidity and at moderate temperature) among porous crystalline materials, such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs). These values are not only comparable to the conventionally used proton exchange membranes, such as Nafion used in fuel cell technologies, but is also the highest value reported in organic-based porous architectures. Notably, this report inaugurates the usage of crystalline hydrogen-bonded porous organic frameworks as solid-state proton conducting materials.
RESUMO
Nitrogen-doped carbon morphologies have been proven to be better alternatives to Pt in polymer-electrolyte membrane (PEM) fuel cells. However, efficient modulation of the active sites by the simultaneous escalation of the porosity and nitrogen doping, without affecting the intrinsic electrical conductivity, still remains to be solved. Here, a simple strategy is reported to solve this issue by treating single-walled carbon nanohorn (SWCNH) with urea at 800 °C. The resulting nitrogen-doped carbon nanohorn shows a high surface area of 1836 m2 g(-1) along with an increased electron conductivity, which are the pre-requisites of an electrocatalyst. The nitrogen-doped nanohorn annealed at 800 °C (N-800) also shows a high oxygen reduction activity (ORR). Because of the high weight percentage of pyridinic nitrogen coordination in N-800, the present catalyst shows a clear 4-electron reduction pathway at only 50 mV overpotential and 16 mV negative shift in the half-wave potential for ORR compared to Pt/C along with a high fuel selectivity and electrochemical stability. More importantly, a membrane electrode assembly (MEA) based on N-800 provides a maximum power density of 30 mW cm(-2) under anion-exchange membrane fuel cell (AEMFC) testing conditions. Thus, with its remarkable set of physical and electrochemical properties, this material has the potential to perform as an efficient Pt-free electrode for AEMFCs.
RESUMO
Adaptable polymer-based solid-state electrolytes can be a game-changer toward safe, lightweight flexible batteries. We present a robust Bakelite-type organic polymer covalently decked with viologen, triazine, and phenolic moieties. Its flexible structure with cationic viologen centers incorporates counter-balancing free hydroxide ions into the polymeric framework. By design, the aromatic groups and heteroatoms in the framework can be activated under an applied potential to prompt a push-pull drive, setting off the towing of hydroxide ions via weak electrostatic, van der Waals, and hydrogen-bond interactions. The frontier orbitals from a DFT-modeled structure certify this. The hydroxyl-polymer requires minimal KOH wetting to maintain a humid environment for Grotthuss-type transport. The hydroxide ion conductivity reaches a value of 1.4 × 10-2 S cm-1 at 80 °C and 95% RH, which is retained for over 15 h. We enhanced its practical utility by coating it as a thin solid-state separator-cum-electrolyte on readily available filter paper. The composite exhibits a conductivity of 4.5 × 10-3 S cm-1 at 80 °C and 95% RH. A zinc-air battery (ZAB) constructed using this polymer-coated paper as electrolyte yields a maximum power density of 115 mW cm-2 and high specific capacitance of 435 mA h g-1. The power density recorded for our ZAB is among the best reported for polymer electrolyte-based batteries. Subsequently, the flexible battery fabricated with IISERP-POF11_OH@FilterPaper exhibits an OCV of 1.44 V, and three batteries in series power a demo traffic signal. To underscore the efficiency of hydroxide ion transport through the complex multifunctional backbone of the polymer, we calculated the diffusion coefficient for OH- (Exp: 2.9 × 10-5 cm2 s-1; Comp. 5.2 × 10-6 cm2 s-1) using electrochemical methods and MD simulations. Climbing-edge NEB calculations reveal a large energy barrier of 2.11 eV for Zn2+ to penetrate the polymer and identify hydroxide ions within the polymer, suggesting no undesirable Zn2+ crossover. Our findings assert the readily accessible C-C-linked cationic polymer's capacity as a solid-state electrolyte for ZABs and any anion-conducting membrane.
RESUMO
π-acidic boxes exhibiting electron reservoir and proton conduction are unprecedented because of their instability in water. We present the synthesis of one of the strongest electron-deficient ionic boxes showing e- uptake as well as proton conductivity. Two large anions fit in the box to form anion-π interactions and form infinite anion-solvent wires. The box with NO3-···water wires confers high proton conductivity and presents the first example that manifests redox and ionic functionality in an organic electron-deficient macrocycle.
RESUMO
ß-Alaninium oxalate hemihydrate, glycinium oxalate, and L-leucinium oxalate salt-cocrystals as non-porous self-assembled hydrogen-bonded organic frameworks afforded proton conductivity of 2.43 × 10-2 S cm-1 (60 °C, 95% RH), 3.03 × 10-2 S cm-1 (60 °C, 95% RH), and 1.19 × 10-2 S cm-1 (80 °C, 95% RH), respectively. These materials possess an extensive 3-dimensional network of hydrogen bonds in their crystal structures, making them efficient proton conducting membranes. The reduction in conductivity values over 10-1 S cm-1 order upon exposure of the samples to a D2O atmosphere in extreme conditions ratified the role of humidity for the conduction of protons. This work explores the relationship between structural features and proton conductivity for the design of proton conducting membranes that are easy to synthesize, eco-friendly, and cheap with potential for futuristic applications.
Assuntos
Aminoácidos , Prótons , Hidrogênio , Ligação de Hidrogênio , OxalatosRESUMO
Ni- and Co-based materials have of late gained prominence over conventional noble metal-based ones as catalysts for energy devices. Here, a high performance catalyst which can facilitate both the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) was developed by anchoring a NiCo2O4 nanowire array on a carbon nanotube sponge (NCS). The three-dimensional morphology of NCS ensured efficient transport of the reactants and products on the catalyst surface, thereby improving the activity of the material. The prepared catalyst showed remarkable OER activity, requiring an overpotential of 280 mV, which is comparable to that of noble-metal catalysts. In addition to the noteworthy OER performance, the catalyst performed well with respect to the ORR. The total oxygen electrode activity overpotential of the catalyst was found to be 0.83 V, which is lower than that of commercial electrodes such as Pt/C and RuO2. A rechargeable Zn-air battery constructed with NCS had an open circuit voltage of 1.42 V, a maximum power density of 160 mW cm-2, and an energy density of 706 W h kg-1. NCS exhibited bifunctional electrocatalytic activity and high stability for both the OER and ORR, proving to be a good replacement for noble metal electrodes in rechargeable metal-air batteries.
RESUMO
Electrochemical water splitting is the most energy-efficient technique for producing hydrogen and oxygen, the two valuable gases. However, it is limited by the slow kinetics of the anodic oxygen evolution reaction (OER), which can be improved using catalysts. Covalent organic framework (COF)-derived porous carbon can serve as an excellent catalyst support. Here, we report high electrocatalytic activity of two composites, formed by supporting RuO2 on carbon derived from two COFs with closely related structures. These composites catalyze oxygen evolution from alkaline media with overpotentials as low as 210 and 217 mV at 10 mA/cm2, respectively. The Tafel slopes of these catalysts (65 and 67 mV/dec) indicate fast kinetics compared to commercial RuO2. The observed activity is the highest among all RuO2-based heterogeneous OER catalysts-a touted benchmark OER catalyst. The high catalytic activity arises from the extremely small-sized (â¼3-4 nm) RuO2 nanoparticles homogeneously dispersed in a micro-mesoporous (BET = 517 m2/g) COF-derived carbon. The porous graphenic carbon favors mass transfer, while its N-rich framework anchors the catalytic nanoparticles, making it highly stable and recyclable. Crucially, the soft pyrolysis of the COF enables the formation of porous carbon and simultaneous growth of small RuO2 particles without aggregation.
RESUMO
A highly active and durable CuPt alloy catalyst with trigonal bipyramidal and truncated cube-type mixed morphologies, anchored on the nitrogen-doped graphene (NGr) surface (CuPt-TBTC/NGr), was prepared by a simple and fast method. The obtained CuPt alloy showed improved oxygen reduction reaction (ORR) activity, with a 30 mV positive shift in the half-wave potential value, as compared to the state-of-the-art Pt/C catalyst in a 0.1 M KOH solution. The CuPt alloy with the trigonal bipyramidal morphology possesses porous type inter-connected sides, which help to achieve improved mass transport of oxygen during the ORR. The exposure of the (111) plane of the CuPt alloy further improved the catalytic activity towards the dioxygen reduction in alkaline media. The ORR activity of the NGr-supported CuPt alloy was found to be dependent on the reaction time, and improved activity was obtained on the material derived at a reaction time of 90 min (CuPt-TBTC/NGr-90). The material synthesized at a lower or higher reaction time than 90 min resulted in a partially formed trigonal bipyramidal morphology with more truncated cubes or agglomerated trigonal bipyramidal and truncated cubes with closed type structures, respectively. Along with the high intrinsic ORR activity, CuPt-TBTC/NGr-90 displayed excellent electrochemical stability. Even after repeated 1000 potential cycling in a window ranging from 0.10 to 1.0 V (vs. RHE), the system clearly outperformed the state-of-the-art Pt/C catalyst with 15 and 60 mV positive shifts in the onset and half-wave potentials, respectively. CuPt-TBTC/NGr-90 also exhibited 2.1 times higher mass activity and 2.2 times higher specific activity, compared to Pt/C at 0.90 V (vs. RHE). Finally, a zinc-air battery fabricated with the alloy catalyst as the air electrode displayed a peak power density of 300 mW cm-2, which is much higher than the peak power density of 253 mW cm-2 obtained for the state-of-the-art Pt/C catalyst as the air electrode.
RESUMO
Conjugated porous polymers were used as precursors to prepare nitrogen and sulphur doped carbon atoms, which were then used for oxygen reduction and energy storage.
RESUMO
Nitrogen containing mesoporous carbon obtained by the pyrolysis of graphene oxide (GO) wrapped ZIF-8 (Zeolitic Imidazolate Frameworks-8) micro crystals is demonstrated to be an efficient catalyst for the oxygen reduction reaction (ORR). ZIF-8 synthesis in the presence of GO sheets helped to realize layers of graphene oxide over ZIF-8 microcrystals and the sphere-like structures thus obtained, on heat treatment, transformed to highly porous carbon with a nitrogen content of about 6.12% and surface area of 502 m2/g. These catalysts with a typical micromeso porous architecture exhibited an onset potential of 0.88Vvs RHE in a four electron pathway and also demonstrated superior durability in alkaline medium compared to that of the commercial Pt/C catalyst. The N-doped porous carbon derived from GO sheathed ZIF-8 core-shell structures could therefore be employed as an efficient electrocatalyst for fuel cell applications.
RESUMO
A significant improvement in the electrochemical oxygen reduction reaction (ORR) activity of molybdenum sulphide (MoS2) could be accomplished by its layer separated dispersion on graphene mediated by cobalt hydroxide (Co(OH)2) through a hydrothermal process (Co(OH)2-MoS2/rGO). The activity makeover in this case is found to be originated from a controlled interplay of the favourable modulations achieved in terms of electrical conductivity, more exposure of the edge planes of MoS2 and a promotional role played by the coexistence of Co(OH)2 in the proximity of MoS2. Co(OH)2-MoS2/rGO displays an oxygen reduction onset potential of 0.855 V and a half wave potential (E1/2) of 0.731 V vs. RHE in 0.1 M KOH solution, which are much higher than those of the corresponding values (0.708 and 0.349 V, respectively) displayed by the as synthesized pristine MoS2 (P-MoS2) under identical experimental conditions. The Tafel slope corresponding to oxygen reduction for Co(OH)2-MoS2/rGO is estimated to be 63 mV dec(-1) compared to 68 mV dec(-1) displayed by the state-of-the-art Pt/C catalyst. The estimated number of electrons transferred during oxygen reduction for Co(OH)2-MoS2/rGO is in the range of 3.2-3.6 in the potential range of 0.77 V to 0.07 V, which again stands out as valid evidence on the much favourable mode of oxygen reduction accomplished by the system compared to its pristine counterpart. Overall, the present study, thus, demonstrates a viable strategy of tackling the inherent limitations, such as low electrical conductivity and limited access to the active sites, faced by the layered structures like MoS2 to position them among the group of potential Pt-free electrocatalysts for oxygen reduction.
RESUMO
Current low-temperature fuel cell research mainly focuses on the development of efficient nonprecious electrocatalysts for the reduction of dioxygen molecule due to the reasons like exorbitant cost and scarcity of the current state-of-the-art Pt-based catalysts. As a potential alternative to such costly electrocatalysts, we report here the preparation of an efficient graphene nanotube based oxygen reduction electrocatalyst which has been derived from single walled nanohorns, comprising a thin layer of graphene nanotubes and encapsulated iron oxide nanoparticles (FeGNT). FeGNT shows a surface area of 750 m(2)/g, which is the highest ever reported among the metal encapsulated nanotubes. Moreover, the graphene protected iron oxide nanoparticles assist the system to attain efficient distribution of Fe-Nx and quaternary nitrogen based active reaction centers, which provides better activity and stability toward the oxygen reduction reaction (ORR) in acidic as well as alkaline conditions. Single cell performance of a proton exchange membrane fuel cell by using FeGNT as the cathode catalyst delivered a maximum power density of 200 mW cm(-2) with Nafion as the proton exchange membrane at 60 °C. The facile synthesis strategy with iron oxide encapsulated graphitic carbon morphology opens up a new horizon of hope toward developing Pt-free fuel cells and metal-air batteries along with its applicability in other energy conversion and storage devices.
RESUMO
Layer-separated 3D nitrogen doped graphene (NG) with an accessible interstitial surface and modulated activity characteristics for oxygen reduction in acidic medium could be prepared by wrapping NG sheets on in situ generated carbon nitride (CNx) tetrapods.
RESUMO
Fluorescent ultrasmall gold clusters decorated with bacterial quorum sensing signal molecules, acyl homoserine lactone, are synthesized. These fluorescent probes are found to have emission in the near-infrared spectral region advantageous for bioimaging. Imaging studies using different strains of bacteria with and without acyl homoserine lactone receptors with the aid of confocal microscopy have shown that the probe interacts preferentially with cells possessing these receptors. This indicates that, with appropriate surface functionalization, the Au clusters can be used for receptor specific detection with enhanced selectivity.