3d Metal Doping of Core@Shell Wüstite@ferrite Nanoparticles as a Promising Route toward Room Temperature Exchange Bias Magnets.

Nanometric core@shell wüstite@ferrite (Fe1-x O@Fe3 O4 ) has been extensively studied because of the emergence of exchange bias phenomena. Since their actual implementation in modern technologies is hampered by the low temperature at which bias is operating, the critical issue to be solved is to obtain exchange-coupled antiferromagnetic@ferrimagnetic nanoparticles (NPs) with ordering temperature close to 300 K by replacing the divalent iron with other transition-metal ions. Here, the effect of the combined substitution of Fe(II)  with Co(II)  and Ni(II)  on the crystal structure and magnetic properties is studied. To this aim, a series of 20 nm NPs with a wüstite-based core and a ferrite shell, with tailored composition, (Co0.3 Fe0.7 O@Co0.8 Fe2.2 O4  and Ni0.17 Co0.21 Fe0.62 O@Ni0.4 Co0.3 Fe2.3 O4 ) is synthetized through a thermal-decomposition method. An extensive morphological and crystallographic characterization of the obtained NPs shows how a higher stability against the oxidation process in ambient condition is attained when divalent cation doping of the iron oxide lattice with Co(II)  and Ni(II)  ions is performed. The dual-doping is revealed to be an efficient way for tuning the magnetic properties of the final system, obtaining Ni-Co doped iron oxide core@shell NPs with high coercivity (and therefore, high energy product), and increased antiferromagnetic ordering transition temperature, close to room temperature.

An Approach for Magnetic Halloysite Nanocomposite with Selective Loading of Superparamagnetic Magnetite Nanoparticles in the Lumen.

We present for the first time a method for the preparation of magnetic halloysite nanotubes (HNT) by loading of preformed superparamagnetic magnetite nanoparticles (SPION) of diameter size ∼6 nm with a hydrodynamic diameter of ∼10 nm into HNT. We found that the most effective route to reach this goal relies on the modification of the inner lumen of HNT by tetradecylphosphonic acid (TDP) to give HNT-TDP, followed by the loading with preformed oleic acid (OA)-stabilized SPION. Transmission electron microscopy evidenced the presence of highly crystalline magnetic nanoparticles only in the lumen, partially ordered in chainlike structures. Conversely, attempts to obtain the same result by exploiting either the positive charge of the HNT inner lumen employing SPIONs covered with negatively charged capping agents or the in situ synthesis of SPION by thermal decomposition were not effective. HNT-TDP were characterized by infrared spectroscopy (ATR-FTIR), thermogravimetric analysis (TGA), and ζ-potential, and all of the techniques confirmed the presence of TDP onto the HNT. Moreover, the inner localization of TDP was ascertained by the use of Nile Red, a molecule whose luminescence is very sensitive to the polarity of the environment. The free SPION@OA (as a colloidal suspension and as a powder) and SPION-in-HNT powder were magnetically characterized by measuring the ZFC-FC magnetization curves as well as the hysteresis cycles at 300 and 2.5 K, confirming that the super-paramagnetic behavior and the main magnetic properties of the free SPION were preserved once embedded in SPION-in-HNT.

Water Dispersible Carbohydrate-Coated Ferrite Nanoparticles. Effect of Cobalt Doping in Magneto-Thermal Properties.

Water dispersible cobalt ferrite nanoparticles, CoxFe3-xO4, of different size (4-10 nm) and various composition (0 ≤ x ≤ 1), functionalized with a rhamnose derivative were obtained and characterized by combining TEM, XRD and elemental analyses techniques. Magnetic properties of these systems were studied by SQUID magnetometry. A particular emphasis was given to the investigation of magnetocrystalline anisotropy and size effect on the heating abilities of the nanoparticles under the application of an alternating magnetic field.

Addressing the Influence of Localized Plasmon Resonance on the Magneto-Optical Properties of Cobalt Ferrite Nanoparticles.

The optical and magneto-optical (MO) properties of magneto-plasmonic nanocomposite films made up of a transparent polymer with a dispersion of cobalt ferrite (CFO) nanoparticles (NPs) and different concentrations of Au NPs are investigated. The volumetric concentrations of CFO and Au NPs, around 3%, and below 7‰ respectively, are below the percolation limit, and hence the nanocom-posite films constitute models for investigating the influence of the electromagnetic field generated at the surface plasmon resonance of Au NPs on the magneto-optical properties of CFO NPs. The plasmon resonance is present in these magneto-plasmonic composites, red-shifted with respect to the bare Au NPs and covering the spectral region where charge-transfer and crystal field MO transitions can be excited. Moreover, the magneto-optical hysteresis loops were measured in the whole spectral region. We observe that the hysteresis loops shape is a fingerprint of the different MO transitions of the CFO NPs. The strength of the MO peak around 750 nm, corresponding to the Crystal Field transition is damped respect to the corresponding peak of the CFO NPs. The strength of this peak evolves non-monotonically with the Au NPs concentration. On the other hand, the MO band around 550 nm, excited by Charge Transfer transitions, changes sign when Au NPs are present. In addition, a second MO contribution is observed. Our results demonstrate that the interactions between plasmon resonance and MO effects are not only determined by the stronger local electromagnetic fields at the resonance but they depend on the type MO transition that is involved in these oxides. This study helps to understand and design the magneto plasmonic nano-structures and applications, for example in biomedicine and sensing, in which random and weak dipolar interparticle interactions between plasmonic and magnetic nanostructures are present.

Increasing the Magnetic Anisotropy of a Natural System: Co-Doped Magnetite Mineralized in Ferritin Shells.

Iron oxide nanoparticles mineralized within the internal cavity of Ferritin protein cage are extremely appealing for the realization of multifunctional therapeutic and diagnostic agents for cancer treatment by drug delivery, magnetic fluid hyperthermia (MFH) and magnetic resonance imaging. Being the maximum mean size imposed by the internal diameter of the protein shell (ca. 8 nm) too small for the use of these systems in MFH, a valuable strategy for the improvement of the hyperthermic efficiency is increasing the magnetic anisotropy by doping the iron oxide with divalent Co ions. This strategy has been demonstrated to be highly efficient in the case of iron oxide nanoparticles mineralized in Human Ferritin (HFt). However, a deterioration of nanoparticles crystallinity and consequently a reduction of the hyperthermic efficiency were observed with increasing Co-doping. In this contribution, we compare two series of Co-doped iron oxide nanoparticles (Co-doping level up to 15%) mineralized into HFt and into Ferritin from the archaea Pirococcus Furiosus (PfFt), the protein structure of which differs for the nucleation sites, with the aim of increasing the crystalline quality of the inorganic cores for larger Co doping. Highly monodisperse nanoparticles of 6-7 nm were obtained in both series. The structural and magnetic characterization indicate that the PfFt series is less subjected to crystallinity deterioration with increasing Co content with respect to the HFt one. Such difference is reflected in the hyperthermic efficiency, which reaches the maximum value for different intermediate Co-doping (10% and 5% for PfFt and HFt, respectively), and goes to zero for further Co-doping increments.

Antimicrobial Lemongrass Essential Oil-Copper Ferrite Cellulose Acetate Nanocapsules.

Cellulose acetate (CA) nanoparticles were combined with two antimicrobial agents, namely lemongrass (LG) essential oil and Cu-ferrite nanoparticles. The preparation method of CA nanocapsules (NCs), with the two antimicrobial agents, was based on the nanoprecipitation method using the solvent/anti-solvent technique. Several physical and chemical analyses were performed to characterize the resulting NCs and to study their formation mechanism. The size of the combined antimicrobial NCs was found to be ca. 220 nm. The presence of Cu-ferrites enhanced the attachment of LG essential oil into the CA matrix. The magnetic properties of the combined construct were weak, due to the shielding of Cu-ferrites from the polymeric matrix, making them available for drug delivery applications where spontaneous magnetization effects should be avoided. The antimicrobial properties of the NCs were significantly enhanced with respect to CA/LG only. This work opens novel routes for the development of organic/inorganic nanoparticles with exceptional antimicrobial activities.

Water dispersal and functionalization of hydrophobic iron oxide nanoparticles with lipid-modified poly(amidoamine) dendrimers.

A novel and facile method for water dispersal of hydrophobic iron oxide nanoparticles based on the amphiphilic PAMAM-C12 dendrimer is described. Stable and highly concentrated water dispersions of multifunctional magnetic nanoparticles were obtained with this single-step approach, and showed interesting relaxometric properties for MRI applications. Importantly, this method does not require substitution of the native hydrophobic capping under nonmild reaction conditions, thus preserving the structural and magnetic properties of the nanoparticles, and extending the possibility of conjugation with thermally labile groups.

The effect of size, shape, coating and functionalization on nuclear relaxation properties in iron oxide core-shell nanoparticles: a brief review of the situation.

In this perspective article, we present a short selection of some of the most significant case studies on magnetic nanoparticles for potential applications in nanomedicine, mainly magnetic resonance. For almost 10 years, our research activity focused on the comprehension of the physical mechanisms on the basis of the nuclear relaxation of magnetic nanoparticles in the presence of magnetic fields; taking advantage of the insights gathered over this time span, we report on the dependence of the relaxation behaviour on the chemico-physical properties of magnetic nanoparticles and discuss them in full detail. In particular, a critical review is carried out on the correlations between their efficiency as contrast agents in magnetic resonance imaging and the magnetic core of magnetic nanoparticles (mainly iron oxides), their size and shape, and the coating and solvent used for making them biocompatible and well dispersible in physiological media. Finally, the heuristic model proposed by Roch and coworkers is presented, as it was extensively adopted to describe most of the experimental data sets. The large amount of data analyzed allowed us to highlight both the advantages and limitations of the model.

1H-NMR Relaxation of Ferrite Core-Shell Nanoparticles: Evaluation of the Coating Effect.

We investigated the effect of different organic coatings on the 1H-NMR relaxation properties of ultra-small iron-oxide-based magnetic nanoparticles. The first set of nanoparticles, with a magnetic core diameter ds1 = 4.4 ± 0.7 nm, was coated with polyacrylic acid (PAA) and dimercaptosuccinic acid (DMSA), while the second set, ds2 = 8.9 ± 0.9 nm, was coated with aminopropylphosphonic acid (APPA) and DMSA. At fixed core diameters but different coatings, magnetization measurements revealed a similar behavior as a function of temperature and field. On the other hand, the 1H-NMR longitudinal r1 nuclear relaxivity in the frequency range ν = 10 kHz ÷ 300 MHz displayed, for the smallest particles (diameter ds1), an intensity and a frequency behavior dependent on the kind of coating, thus indicating different electronic spin dynamics. Conversely, no differences were found in the r1 relaxivity of the biggest particles (ds2) when the coating was changed. It is concluded that, when the surface to volume ratio, i.e., the surface to bulk spins ratio, increases (smallest nanoparticles), the spin dynamics change significantly, possibly due to the contribution of surface spin dynamics/topology.

Defect-Engineering by Solvent Mediated Mild Oxidation as a Tool to Induce Exchange Bias in Metal Doped Ferrites.

The crystal site occupancy of different divalent ions and the induction of lattice defects represent an additional tool for modifying the intrinsic magnetic properties of spinel ferrites nanoparticles. Here, the relevance of the lattice defects is demonstrated in the appearance of exchange-bias and in the improvement of the magnetic properties of doped ferrites of 20 nm, obtained from the mild oxidation of core@shell (wüstite@ferrite) nanoparticles. Three types of nanoparticles (Fe0.95 O@Fe3 O4 , Co0.3 Fe0.7 O@Co0.8 Fe2.2 O4 and Ni0.17 Co0.21 Fe0.62 O@Ni0.4 Co0.3 Fe2.3 O4 ) are oxidized. As a result, the core@shell morphology is removed and transformed in a spinel-like nanoparticle, through a topotactic transformation. This study shows that most of the induced defects in these nanoparticles and their magnetic properties are driven by the inability of the Co(II) ions at the octahedral sites to migrate to tetrahedral sites, at the chosen mild oxidation temperature. In addition, the appearance of crystal defects and antiphase boundaries improves the magnetic properties of the starting compounds and leads to the appearance of exchange bias at room temperature. These results highlight the validity of the proposed method to impose novel magnetic characteristics in the technologically relevant class of nanomaterials such as spinel ferrites, expanding their potential exploitation in several application fields.

Proton Therapy, Magnetic Nanoparticles and Hyperthermia as Combined Treatment for Pancreatic BxPC3 Tumor Cells.

We present an investigation of the effects on BxPC3 pancreatic cancer cells of proton therapy combined with hyperthermia, assisted by magnetic fluid hyperthermia performed with the use of magnetic nanoparticles. The cells' response to the combined treatment has been evaluated by means of the clonogenic survival assay and the estimation of DNA Double Strand Breaks (DSBs). The Reactive Oxygen Species (ROS) production, the tumor cell invasion and the cell cycle variations have also been studied. The experimental results have shown that the combination of proton therapy, MNPs administration and hyperthermia gives a clonogenic survival that is much smaller than the single irradiation treatment at all doses, thus suggesting a new effective combined therapy for the pancreatic tumor. Importantly, the effect of the therapies used here is synergistic. Moreover, after proton irradiation, the hyperthermia treatment was able to increase the number of DSBs, even though just at 6 h after the treatment. Noticeably, the magnetic nanoparticles' presence induces radiosensitization effects, and hyperthermia increases the production of ROS, which contributes to cytotoxic cellular effects and to a wide variety of lesions including DNA damage. The present study indicates a new way for clinical translation of combined therapies, also in the vision of an increasing number of hospitals that will use the proton therapy technique in the near future for different kinds of radio-resistant cancers.

Star-Shaped Magnetic-Plasmonic Au@Fe3O4 Nano-Heterostructures for Photothermal Therapy.

Here, we synthesize a Au@Fe3O4 core@shell system with a highly uniform unprecedented star-like shell morphology with combined plasmonic and magnetic properties. An advanced electron microscopy characterization allows assessing the multifaceted nature of the Au core and its role in the growth of the peculiar epitaxial star-like shell with excellent crystallinity and homogeneity. Magnetometry and magneto-optical spectroscopy revealed a pure magnetite shell, with a superior saturation magnetization compared to similar Au@Fe3O4 heterostructures reported in the literature, which is ascribed to the star-like morphology, as well as to the large thickness of the shell. Of note, Au@Fe3O4 nanostar-loaded cancer cells displayed magneto-mechanical stress under a low frequency external alternating magnetic field (few tens of Hz). On the other hand, such a uniform, homogeneous, and thick magnetite shell enables the shift of the plasmonic resonance of the Au core to 640 nm, which is the largest red shift achievable in Au@Fe3O4 homogeneous core@shell systems, prompting application in photothermal therapy and optical imaging in the first biologically transparent window. Preliminary experiments performing irradiation of a stable water suspension of the nanostar and Au@Fe3O4-loaded cancer cell culture suspension at 658 nm confirmed their optical response and their suitability for photothermal therapy. The outstanding features of the prepared system can be thus potentially exploited as a multifunctional platform for magnetic-plasmonic applications.

Water-dispersible sugar-coated iron oxide nanoparticles. An evaluation of their relaxometric and magnetic hyperthermia properties.

Synthesis of functionalized magnetic nanoparticles (NPs) for biomedical applications represents a current challenge. In this paper we present the synthesis and characterization of water-dispersible sugar-coated iron oxide NPs specifically designed as magnetic fluid hyperthermia heat mediators and negative contrast agents for magnetic resonance imaging. In particular, the influence of the inorganic core size was investigated. To this end, iron oxide NPs with average size in the range of 4-35 nm were prepared by thermal decomposition of molecular precursors and then coated with organic ligands bearing a phosphonate group on one side and rhamnose, mannose, or ribose moieties on the other side. In this way a strong anchorage of the organic ligand on the inorganic surface was simply realized by ligand exchange, due to covalent bonding between the Fe(3+) atom and the phosphonate group. These synthesized nanoobjects can be fully dispersed in water forming colloids that are stable over very long periods. Mannose, ribose, and rhamnose were chosen to test the versatility of the method and also because these carbohydrates, in particular rhamnose, which is a substrate of skin lectin, confer targeting properties to the nanosystems. The magnetic, hyperthermal, and relaxometric properties of all the synthesized samples were investigated. Iron oxide NPs of ca. 16-18 nm were found to represent an efficient bifunctional targeting system for theranostic applications, as they have very good transverse relaxivity (three times larger than the best currently available commercial products) and large heat release upon application of radio frequency (RF) electromagnetic radiation with amplitude and frequency close to the human tolerance limit. The results have been rationalized on the basis of the magnetic properties of the investigated samples.

Biofunctionalization of anisotropic nanocrystalline semiconductor-magnetic heterostructures.

Asymmetric binary nanocrystals (BNCs) formed by a spherical γ-Fe(2)O(3) magnetic domain epitaxially grown onto a lateral facet of a rodlike anatase TiO(2) nanorod have been functionalized with PEG-terminated phospholipids, resulting in a micellar system that enables the BNC dispersion in aqueous solution. The further processability of the obtained water-soluble BNC including PEG lipid micelles and their use in bioconjugation experiments has been successfully demonstrated by covalently binding to bovine serum albumin (BSA). The whole process has also been preliminarily performed on spherical iron oxide nanocrystals (NCs) and TiO(2) nanorods (NRs), which form single structural units in the heterostructures. Each step has been thoroughly monitored by using optical, structural, and electrophoretic techniques. In addition, an investigation of the magnetic behavior of the iron oxide NCs and BNCs, before and after incorporation into PEG lipid micelles and subsequently bioconjugation, has been carried out, revealing that the magnetic characteristics are mostly retained. The proposed approach to achieving water-soluble anisotropic BNCs and their bioconjugates has a large potential in catalysis and biomedicine and offers key functional building blocks for biosensor applications.

Synthesis of iron oxide nanoparticles in Listeria innocua Dps (DNA-binding protein from starved cells): a study with the wild-type protein and a catalytic centre mutant.

A comparative analysis of the magnetic properties of iron oxide nanoparticles grown in the cavity of the DNA-binding protein from starved cells of the bacterium Listeria innocua, LiDps, and of its triple-mutant lacking the catalytic ferroxidase centre, LiDps-tm, is presented. TEM images and static and dynamic magnetic and electron magnetic resonance (EMR) measurements reveal that, under the applied preparation conditions, namely alkaline pH, high temperature (65 degrees C), exclusion of oxygen, and the presence of hydrogen peroxide, maghemite and/or magnetite nanoparticles with an average diameter of about 3 nm are mineralised inside the cavities of both LiDps and LiDps-tm. The magnetic nanoparticles (MNPs) thus formed show similar magnetic properties, with superparamagnetic behaviour above 4.5 K and a large magnetic anisotropy. Interestingly, in the EMR spectra an absorption at half-field is observed, which can be considered as a manifestation of the quantum behaviour of the MNPs. These results indicate that Dps proteins can be advantageously used for the production of nanomagnets at the interface between molecular clusters and traditional MNPs and that the presence of the ferroxidase centre, though increasing the efficiency of nanoparticle formation, does not affect the nature and fine structure of the MNPs. Importantly, the self-organisation of MNP-containing Dps on HRTEM grids suggests that Dps-enclosed MNPs can be deposited on surfaces in an ordered fashion.

Synthesis and studies of water-soluble Prussian Blue-type nanoparticles into chitosan beads.

A new approach to the synthesis of highly stable aqueous colloids of coordination polymer nanoparticles was developed by using water-soluble chitosan beads as template and as stabilizing agent. The method consists in the synthesis of nanocomposite beads containing cyano-bridged coordination polymer nanoparticles via step-by-step coordination of the metal ions and the hexacyanometallate precursors into the chitosan pores and then water solubilization of these as-obtained nanocomposite beads. We obtain a large range of M(2+)/[M'(CN)(6)](3-)/chitosan (where M(2+) = Ni(2+), Cu(2+), Fe(2+), Co(2+), Mn(2+) and M' = Fe(3+) and Cr(3+)) nanocomposite beads and their respective aqueous colloids containing coordination polymer core/chitosan shell nanoparticles. The nanocomposite beads and the corresponding aqueous colloids were studied by Infrared (IR) and UV-Vis spectroscopy, nitrogen sorption (BET), Transmission Electron Microscopy (TEM), High Resolution Transmission Electron Microscopy (HRTEM) and magnetic analyses, which reveal the presence of homogeneously dispersed uniformly-sized cyano-bridged coordination polymer nanoparticles. The detailed studies of the static and dynamic magnetic properties of these nanoparticles show the occurrence of a spin-glass like behavior presumably produced by intra-particle spin disorder due to the low spin exchange energy characterizing these materials.

A bionic shuttle carrying multi-modular particles and holding tumor-tropic features.

The systemic delivery of composite nanoparticles remains an outstanding challenge in cancer nanomedicine, and the principal reason is a complex interplay of biological barriers. In this regard, adaptive cell transfer may represent an alternative solution to circumvent these barriers down to the tumor microenvironment. Here, tumor-tropic macrophages are proposed as a tool to draw and vehiculate modular nanoparticles integrating magnetic and plasmonic components. The end result is a bionic shuttle that exhibits a plasmonic band within the so-called therapeutic window arising from as much as 40 pg Au per cell, magnetization in the order of 150 pemu per cell, and more than 90% of the pristine viability and chemotactic activity of its biological component, until at least two days of preparation. Its synergistic combination of plasmonic, magnetic and tumor-tropic functions is assessed in vitro for applications as magnetic guidance or sorting, with a propulsion around 4 µm s-1 for a magnetic gradient of 0.8 T m-1, the optical hyperthermia of cancer, with stability of photothermal conversion to temperatures exceeding 50∘C, and the photoacoustic imaging of cancer under realistic conditions. These results collectively suggest that a bionic design may be a promising roadmap to reconcile the efforts for multifunctionality and targeted delivery, which are both key goals in nanomedicine.

Covalent hyaluronic-based coating of magnetite nanoparticles: Preparation, physicochemical and biological characterization.

In this paper we report about the preparation, physicochemical and biological characterization of a magneto responsive nanostructured material based on magnetite nanoparticles (NP) coated with hyaluronic acid (HA). A synthetic approach, based on a Cu(I)-catalyzed azide-alkyne 1,3-dipolar cycloaddition "click" reaction between azido-functionalized magnetite NP and a derivative of hyaluronic acid bearing propargylated ferulic acid groups (HA-FA-Pg), was developed to link covalently the polymer layer to the magnetite NP. The functionalization steps of the magnetite NP and their coating with the HA-FA-Pg layer were monitored by Fourier Transform Infrared (FTIR) spectroscopy and Thermal Gravimetric Analysis (TGA) while Dynamic Light Scattering (DLS) and ζ-potential measurements were performed to characterize the aqueous dispersions of the HA-coated magnetite NP. Aggregation and sedimentation processes were investigated also by UV-visible spectroscopy and the dispersions of HA-coated magnetite NP were found significantly more stable than those of bare NP. Magnetization and zero field cooled/field cooled curves revealed that both bare and HA-coated magnetite NP are superparamagnetic at room temperature. Moreover, cytotoxicity studies showed that the coating with HA-FA-Pg significantly reduces the cytotoxicity of the magnetite NP providing the rational basis for the application of the HA-coated magnetite NP as healthcare material.

Coating Effect on the 1H-NMR Relaxation Properties of Iron Oxide Magnetic Nanoparticles.

We present a 1H Nuclear Magnetic Resonance (NMR) relaxometry experimental investigation of two series of magnetic nanoparticles, constituted of a maghemite core with a mean diameter dTEM = 17 ± 2.5 nm and 8 ± 0.4 nm, respectively, and coated with four different negative polyelectrolytes. A full structural, morpho-dimensional and magnetic characterization was performed by means of Transmission Electron Microscopy, Atomic Force Microscopy and DC magnetometry. The magnetization curves showed that the investigated nanoparticles displayed a different approach to the saturation depending on the coatings, the less steep ones being those of the two samples coated with P(MAA-stat-MAPEG), suggesting the possibility of slightly different local magnetic disorders induced by the presence of the various polyelectrolytes on the particles' surface. For each series, 1H NMR relaxivities were found to depend very slightly on the surface coating. We observed a higher transverse nuclear relaxivity, r2, at all investigated frequencies (10 kHz ≤ νL ≤ 60 MHz) for the larger diameter series, and a very different frequency behavior for the longitudinal nuclear relaxivity, r1, between the two series. In particular, the first one (dTEM = 17 nm) displayed an anomalous increase of r1 toward the lowest frequencies, possibly due to high magnetic anisotropy together with spin disorder effects. The other series (dTEM = 8 nm) displayed a r1 vs. νL behavior that can be described by the Roch's heuristic model. The fitting procedure provided the distance of the minimum approach and the value of the Néel reversal time (τ ≈ 3.5 ÷ 3.9·10-9 s) at room temperature, confirming the superparamagnetic nature of these compounds.

Unraveling the mechanism of the one-pot synthesis of exchange coupled Co-based nano-heterostructures with a high energy product.

The development of reproducible protocols to synthesize hard/soft nano-heterostructures (NHSs) with tailored magnetic properties is a crucial step to define their potential application in a variety of technological areas. Thermal decomposition has proved to be an effective tool to prepare such systems, but it has been scarcely used so far for the synthesis of Co-based metal/ferrite NHSs, despite their intriguing physical properties. We found a new approach to prepare this kind of nanomaterial based on a simple one-pot thermal decomposition reaction of metal-oleate precursors in the high boiling solvent docosane. The obtained NHSs are characterized by the coexistence of Co metal and Co doped magnetite and are highly stable in an air atmosphere, thanks to the passivation of the metal with a very thin oxide layer. The investigation of the influence of the metal precursor composition (a mixed iron-cobalt oleate), of the ligands (oleic acid and sodium oleate) and of the reaction time on the chemical and structural characteristics of the final product, allowed us to rationalize the reaction pathway and to determine the role of each parameter. In particular, the use of sodium oleate is crucial to obtain a metal phase in the NHSs. In such a way, the one-pot approach proposed here allows the fine control of the synthesis, leading to the formation of stable, high performant, metal/ferrite NHSs with tailored magnetic properties. For instance, the room temperature maximum energy product was increased up to 19 kJ m-3 by tuning the Co content in the metal precursor.