Classification of e-waste using machine learning-assisted laser-induced breakdown spectroscopy.

Waste management and the economy are intertwined in various ways. Adopting sustainable waste management techniques can contribute to economic growth and resource conservation. Artificial intelligence (AI)-based classification is very crucial for rapid and contactless classification of metals in electronic waste (e-waste) management. In the present research work, five types of aluminium alloys, because of their extensive use in structural, electrical and thermotechnical functions in the electronics industry, were taken. Laser-induced breakdown spectroscopy (LIBS), a spectral identifier technique, was employed in conjunction with machine learning (ML) classification models of AI. Principal component analysis (PCA), an unsupervised ML classifier, was found incapable to differentiate LIBS data of alloys. Supervised ML classifier was then trained (for 10-fold cross-validation) on randomly selected 80% and tested on 20% spectral data of each alloy to assess classification capacity of each. In most of the tested variants of K nearest neighbour (kNN) the resulting accuracy was lower than 30% but kNN ensembled with random subspace method showed improved accuracy up to 98%. This study revealed that an AI-based LIBS system can classify e-waste alloys rather effectively in a non-contactless mode and could potentially be connected with robotic systems, hence, minimizing manual labour.

Evaluation of medicinal plants using laser-induced breakdown spectroscopy (LIBS) combined with chemometric techniques.

Medicinal plants play a vital role in herbal medical field and allopathic medicine field industry. Chemical and spectroscopic studies of Taraxacum officinale, Hyoscyamus niger, Ajuga bracteosa, Elaeagnus angustifolia, Camellia sinensis, and Berberis lyceum are conducted in this paper by using a 532-nm Nd:YAG laser in an open air environment. These medicinal plant's leaves, roots, seed, and flowers are used to treat a range of diseases by the locals. It is crucial to be able to distinguish between beneficial and detrimental metal elements in these plants. We demonstrated how various elements are categorized and how roots, leaves, seeds and flowers of same plants differ from each other on the basis of elemental analysis. Furthermore, for classification purpose, different classification models, partial least square discriminant analysis (PLS-DA), k-nearest neighbors (kNN), and principal component analysis (PCA) are used. We found silicon (Si), aluminum (Al), iron (Fe), copper (Cu), calcium (Ca), magnesium (Mg), sodium (Na), potassium (K), manganese (Mn), phosphorous (P), and vanadium (V) in all of the medicinal plant samples with a molecular form of carbon and nitrogen band. We detected Ca, Mg, Si, and P as primary components in all of the plant samples, as well as V, Fe, Mn, Al, and Ti as essential medicinal metals, and additional trace elements like Si, Sr, and Al. The result's findings show that the PLS-DA classification model with single normal variate (SNV) preprocessing method is the most effective classification model for different types of plant samples. The average correct classification rate obtained for PLS-DA with SNV is 95%. Moreover, laser-induced breakdown spectroscopy (LIBS) was successfully employed to perform rapid, sensitive, and quantitative trace element analysis on medicinal herbs and plant samples.

Comparison of microcoils and polyvinyl alcohol particles in selective microcatheter angioembolization of non variceal acute gastrointestinal hemorrhage.

OBJECTIVES: To compare the efficacy of polyvinyl alcohol (PVA) particles with microcoils in angiembolisation of non variceal acute gastrointestinal haemorrhage. METHODS: This is a retrospective cross-sectional study of patients who underwent transcatheter angioembolization from January, 1995 to December, 2013 at Aga Khan University Hospital, Karachi. Patients were divided into two groups on basis of use of either microcoils or PVA particles and compared in terms of technical success, clinical success, re-bleeding and ischemic complication rates. Chi (χ(2)) square and Fisher's exact tests were applied and a P-value of less than 0.05 was considered statistically significant. RESULTS: Fifty seven patients underwent angioembolization. Microcoil and PVA particles embolization was performed in 63% (36/57) and 35% (20/57) cases respectively. Technical success was achieved in all cases (100%). Clinical success rate was higher in microcoils group (92%) than PVA particles group (75%) with statistically significant P value (p=0.048). Ischemic complication was seen in one case (3%) in the microcoil group, while no such complications were seen in the PVA particles group. CONCLUSION: In angioembolization of non variceal acute gastrointestinal haemorrhage microcoils are better than Polyvinyl alcohol particles with higher clinical success and lower re-bleed rates.

Surface Roughness of Interior Fine Flow Channels in Selective Laser Melted Ti-6Al-4V Alloy Components.

A challenge remains in achieving adequate surface roughness of SLM fabricated interior channels, which is crucial for fuel delivery in the space industry. This study investigated the surface roughness of interior fine flow channels (1 mm diameter) embedded in SLM fabricated TC4 alloy space components. A machine learning approach identified layer thickness as a significant factor affecting interior channel surface roughness, with an importance score of 1.184, followed by scan speed and laser power with scores of 0.758 and 0.512, respectively. The roughness resulted from thin layer thickness of 20 µm, predominantly formed through powder adherence, while from thicker layer of 50 µm, the roughness was mainly due to the stair step effect. Slow scan speeds increased melt pools solidification time at roof overhangs, causing molten metal to sag under gravity. Higher laser power increased melt pools temperature and led to dross formation at roof overhangs. Smaller hatch spaces increased roughness due to overlapping of melt tracks, while larger hatch spaces reduced surface roughness but led to decreased part density. The surface roughness was recorded at 34 µm for roof areas and 26.15 µm for floor areas. These findings contribute to potential adoption of TC4 alloy components in the space industry.

Effects of pulsed Nd:YAG laser kernel irradiation on maize (Zea mays L.): Insights into germination, gas exchange, photosynthetic pigments, and morphological modifications.

Energy has always been the most concerned topic worldwide due to its large consumption. Among various types of energies, light has amazing characteristics and have interesting effects on living organisms. Interest is increasing in the use of laser kernel treatment as an environment friendly physical technique for better results in agronomic crops, but the work is still in progress. The present study was conducted with the aim to examine the application of range of Neodymium-doped Yttrium Aluminum Garnet (Nd:YAG) pulsed laser exposures (200, 400, 600, 800, 1000, 1200, 1400 J/cm2) as pre-sowing kernel treatment on seedling survival rate, leaf photosynthetic activity in relation with photosynthetic pigments and visual morphological effects at seedling to maturity stage. Results showed that the low laser exposure (200, 400 and 600 J/cm2) improved the photosynthetic activity in parallel with improvement in chlorophyll a, chlorophyll b, total chlorophyll, carotenoids as well as morphological traits. Kernel treatments with higher laser fluences (800, 1000, 1200 and 1400 J/cm2) showed irregular responses in studied attributes examined at the individual plant level. At 800 and 1000 J/cm2 improvements were found in some plants but at higher doses clear negative impacts were recorded on studied attributes. In conclusion, the lower doses of Nd:YAG pulsed laser fluences are found beneficial for induction of improvement in maize plants for better growth but higher doses were found toxic ones. In future further studies are needed to check the impacts of low laser doses on yield related attributes under field conditions and the high doses might also be used to create variants with beneficial characteristics if possible.

Comparison of whole blood and serum samples of breast cancer based on laser-induced breakdown spectroscopy with machine learning.

To identify cancer from non-cancer is one of the most challenging issues nowadays in the early diagnosis of cancer. The primary issue of early detection is to choose a suitable type of sample collection to diagnose cancer. A comparison of whole blood and serum samples of breast cancer was studied using laser-induced breakdown spectroscopy (LIBS) with machine learning methods. For LIBS spectra measurement, blood samples were dropped on a substrate of boric acid. For the discrimination of breast cancer and non-cancer samples, eight machine learning models were applied to LIBS spectral data, including decision tree, discrimination analysis, logistic regression, naïve byes, support vector machine, k-nearest neighbor, ensemble and neural networks classifiers. Discrimination between whole blood samples showed that narrow neural networks and trilayer neural networks both provided 91.7% highest prediction accuracy and serum samples showed that all the decision tree models provided 89.7% highest prediction accuracy. However, using whole blood as sample achieved the strong emission lines of spectra, better discrimination results of PCA and maximum prediction accuracy of machine learning models as compared to using serum samples. These merits concluded that whole blood samples could be a good option for the rapid detection of breast cancer. This preliminary research may provide the complementary method for early detection of breast cancer.

Enhancement in the germination, growth and yield of okra (Abelmoschus esculentus) using pre-sowing magnetic treatment of seeds.

The effect of pre-sowing magnetic treatments was investigated on germination, growth and yield of okra (Abelmoschus esculentus cv. Sapz pari). The dry okra seeds were exposed to sinusoidal magnetic field induced by an electromagnet. The average magnetic field exposure was 99 mT for 3 and 11 min and seeds with no magnetic field treatment were considered as control. Both treated and non-treated seeds were sown in experimental plots (120 m2) under similar conditions. Samples were collected at regular intervals for statistical analysis. A significant increase (P < 0.05) was observed in germination percentage, number of flowers per plant, leaf area (cm2), plant height (cm) at maturity, number of fruits per plant, pod mass per plant and number of seeds per plant. The 99 mT for 11 min exposure showed better results as compared to control.

Fabrication of visible light active Mn-doped Bi2WO6-GO/MoS2 heterostructure for enhanced photocatalytic degradation of methylene blue.

The increase in environmental pollution has led to an increased investigation in the development of novel ternary photocatalytic systems for remediation. These photocatalytic systems exhibit superior photocatalytic action for the removal of pollutants because of their visible light active bandgaps. A highly effective visible light active ternary heterojunction was fabricated using a hydrothermal method assisted by ultrasonication. Herein, we report the in situ hydrothermal synthesis of Mn-doped Bi2WO6-GO/ MoS2 photocatalyst, efficiently exhibiting greater photocatalytic activity for the wastewater treatment under solar light. The binary metal sulphide (MoS2) used as a co-catalyst, acted as an electron collector and graphene oxide (GO) as a support material for interfacial electron transfer to and from bismuth tungstate and MoS2. The as-prepared samples were characterized using SEM-EDX, FT-IR, XRD, XPS, BET, PL, and UV-Vis techniques. The bandgap of the novel photocatalyst was found in the visible region (2.2 eV) which helped in suppressing photoinduced electron-hole pairs recombination. The ternary Mn-doped Bi2WO6-GO/MoS2 showed 99% methylene blue removal after 60 minutes of sunlight irradiation at the optimum conditions of pH 8, catalyst dose 50 mg/100ml, and initial MB concentration of 10ppm under sunlight irradiation. The doped ternary heterostructure has proved to be an effective sunlight-active photocatalyst that can be reused without substantial loss in photocatalytic efficiency.

Biotransformation and toxicity evaluation of functionalized manganese doped iron oxide nanoparticles.

Safe inorganic nanomaterials are tremendously used for diagnosis and therapies. However, essential processing in the microbiological environment changed the physical properties and in situ degradability, which is evaluated meticulously. In this research article, bare, Polyethylene glycol, and citrate coated manganese doped iron oxide nanoparticles are synthesized through the coprecipitation route. Structural, magnetic, optical, and morphological analyses are performed through different characterization tools. X-ray diffraction confirmed the formation of single-phase FeMnO3 with a crystallite size of 48.91 nm. Vibrating sample magnetometer analysis confirmed the formation of soft ferromagnetic behavior of bare and coated nanoparticles (NPs). Scanning electron microscopy and transmission electron microscopy confirmed the formation of spherical shaped nanoparticles. Single-dose in vivo acute toxicity testing is performed through the intraperitoneal route of administration on groups of healthy albino rats. Elevated enzyme levels of kidney and liver are observed at day 1 but a transient decrease is observed at later stages. Through optical follow-up, degradation effects are studied by adding prepared NPs in lysosomal like medium. Finally, metabolization of degraded products based on manganese/iron ions is studied by adding apoferritin into a lysosome like solution. These studies showed partial storage of manganese ions from NPs, while no substantial transfer is observed in the case of manganese salt.

Suppressed photocatalytic activity of ZnO based Core@Shell and RCore@Shell nanostructure incorporated in the cellulose nanofiber.

The protection of skin cells against intense ultra-violet (UV) rays is of greater concern and needs immediate attention. Sustainable efforts and strategies are in progress to minimize the factors that adversely affect skin cells. Herein, we synthesized zinc oxide (ZnO) in the form of core-shell (Core@Shell) or reverse core-shell (RCore@Shell) structure where silica was synthesized as a shell or core, respectively on the surface of cellulose nanofiber (CNF). Both cases exhibited much higher UV-blocking performance as well as alleviate the whitening effect because these particles retain their nanoscale dimensions as favored by the cosmetic industry. Significantly, these nanostructures shows the less photocatalysis activity than that of pristine ZnO nanoparticles. And we found that the photocatalytic activity of ZnO in RCore@Shell/CNF was more suppressed that Core@Shell/CNF, showing that it is a proper structure to neutralize or scavenge free radicals prior to their exit from the particles. Our results suggest that, reduction in photocatalysis induced by Core@Shell/CNF and RCore@Shell/CNF nanostructures is a promising strategy for skincare products in cosmetic industry.

Synthesis and characterization of stable and biological active chitin-based polyurethane elastomers.

In this work, the preparation of novel biocompatible polyurethane (PU) elastomers were carried out using curcumin and 1,4-butanediol (1,4-BDO) via step growth polymerization reaction of hydroxyl terminated polybutadiene (HTPB), toluene diisocyanate (TDI) and chitin to improve the biocompatibility, antibacterial and antioxidant properties of PU elastomers. Five samples were synthesized by varying moles ratio of curcumin and 1,4-BDO. The structural study of blends was done by FTIR spectroscopy which confirmed the incorporation of curcumin and 1,4-BDO into the polyurethane matrix. TGA analysis of polyurethane (PU) blends showed good thermal stability with 0.25 M curcumin and 1.75 M 1,4-BDO. Measurements of antibacterial properties were done via agar diffusion method which showed outstanding potential against selected strains of bacteria. The results revealed that biocompatibility, antibacterial and antioxidant potential of purposed polyurethanes elastomers were improved by the incorporation of curcumin which might be the precursor of biomedical applications. Collectively, this work is a footstep towards the synthesis of innovative biocompatible materials which made it suitable for biological applications.

Learning from the radiological findings of dropped gall stone and/or appendicolith (its complication and management strategy).

This case report the patient presented with intra-abdominal abscess with the past surgical history of laparoscopic cholecystectomy and appendectomy. Being a radiologist, it is important to keep patient's previous surgical interventions in mind as it can change the management options.

Antioxidant resveratrol protects against copper oxide nanoparticle toxicity in vivo.

The upsurge in copper oxide nanoparticle (CuONP) applications in various fields triggers hazardous effects on health. Resveratrol, a polyphenol found in plants of stilbene class, has been reported to decrease oxidative stress. The current study investigated the protective effect of resveratrol (RVT) against CuONP-induced hepatotoxicity and nephrotoxicity in male Wistar rats. CuONPs were prepared by precipitation method and characterized by X-ray diffraction (XRD) technique and scanning electron microscopy (SEM). Average crystallite size, lattice parameters (a, b, and c), volume of unit cell, and X-ray density were found to be 33 nm, (a = 4.691 Å, b = 3.409 Å, and c = 5.034 Å), 79.4 Å3, and 6.506 g/cm3, respectively, from XRD pattern. SEM showed uniform morphology of synthesized nanoparticles. Severe hepatic and renal injury was found in CuONP (300 mg/kg/day intragastrically (i.g.)) group after 7 days as shown by significantly increased serum levels of ALT, AST, creatinine, urea, and total oxidant status along with histopathological alterations. Resveratrol (60 mg/kg) treatment prevented the toxic effects induced by CuONPs. In conclusion, our data showed protective activity of resveratrol against toxic effects of copper oxide nanoparticles presumably through its antioxidant properties. Graphical abstract ᅟ.

In vitro evaluation of the toxic effects of MgO nanostructure in Hela cell line.

MgO is an attractive choice for carcinogenic cell destruction in photodynamic therapy, as confirmed by manifold analysis. The prime focus of the presented research is to investigate the toxicity caused by morphologically different MgO nanostructures obtained by annealing at various annealing temperatures. Smart (stimuli-responsive) MgO nanomaterials are a very promising class of nanomaterials, and their properties can be controlled by altering their size, morphology, or other relevant characteristics. The samples investigated here were grown by the co-precipitation technique. Toxicity-dependent parameters were assessed in a HeLa cell model after annealing the grown samples at 350 °C, 450 °C, and 550 °C. After the overall characterization, an analysis of toxicity caused by changes in the MgO nanostructure morphology was tested in a HeLa cell model using a neutral red assay and microscopy. The feasibility of using MgO for PDT was assessed. Empirical modelling was applied to corroborate the experimental results obtained from assessing cell viability losses and reactive oxygen species. The results indicate that MgO is an excellent candidate material for medical applications and could be utilized for its potential ability to upgrade conventionally used techniques.

Temperature-Dependent and Gate-Tunable Rectification in a Black Phosphorus/WS2 van der Waals Heterojunction Diode.

Heterostructures comprising two-dimensional (2D) semiconductors fabricated by individual stacking exhibit interesting characteristics owing to their 2D nature and atomically sharp interface. As an emerging 2D material, black phosphorus (BP) nanosheets have drawn much attention because of their small band gap semiconductor characteristics along with high mobility. Stacking structures composed of p-type BP and n-type transition metal dichalcogenides can produce an atomically sharp interface with van der Waals interaction which leads to p-n diode functionality. In this study, for the first time, we fabricated a heterojunction p-n diode composed of BP and WS2. The rectification effects are examined for monolayer, bilayer, trilayer, and multilayer WS2 flakes in our BP/WS2 van der Waals heterojunction diodes and also verified by density function theory calculations. We report superior functionalities as compared to other van der Waals heterojunction, such as efficient gate-dependent static rectification of 2.6 × 104, temperature dependence, thickness dependence of rectification, and ideality factor of the device. The temperature dependence of Zener breakdown voltage and avalanche breakdown voltage were analyzed in the same device. Additionally, superior optoelectronic characteristics such as photoresponsivity of 500 mA/W and external quantum efficiency of 103% are achieved in the BP/WS2 van der Waals p-n diode, which is unprecedented for BP/transition metal dichalcogenides heterostructures. The BP/WS2 van der Waals p-n diodes have a profound potential to fabricate rectifiers, solar cells, and photovoltaic diodes in 2D semiconductor electronics and optoelectronics.

Comparison of HeNe laser and sinusoidal non-uniform magnetic field seed pre-sowing treatment effect on Glycine max (Var 90-I) germination, growth and yield.

Recently, laser and magnetic field pre-sowing seed treatments attracted the attention of the scientific community in response to their positive effect on plant characteristics and the present study was exemplified for Glycine max Var 90-I. Seeds were exposed to laser (HeNe-wave length 632nm and density power of 1mW/cm2) and magnetic field (sinusoidal non-uniform-50, 75 and 100mT for 3, 5min with exposure) and seed germination, seedling growth and yield attributes were compared. The germination (mean germination, germination percentage, emergence index, germination speed, relative germination coefficient, emergence coefficient of uniformity) growth (root dry weight, root length, shoot fresh weight and shoot dry weight, leaf dry & fresh weight, root fresh weight, leaf area, shoot length, plant total dry weight at different stages, stem diameter, number of leaves, vigor index I & II), biochemical (essential oil) and yield attributes (seed weight, count) were enhanced significantly in response to both laser and magnetic field treatments. However, magnetic field treatment furnished slightly higher response versus laser except relative water contents, whole plant weight and shoot length. Results revealed that both laser and magnetic field pre-sowing seed treatments affect the germination, seedling growth, and yield characteristics positively and could possibly be used to enhance Glycine max productivity.

Low power continuous wave-laser seed irradiation effect on Moringa oleifera germination, seedling growth and biochemical attributes.

Recently, laser application in agriculture has gained much attention since plant characteristics were improved significantly in response of pre-sowing seed treatment. Pre-sowing laser seed treatment effects on germination, seedling growth and mineral profile were studied in Moringa olifera. M. olifera healthy seeds were exposed to 25, 50, 75mJ low power continuous wave laser light and grown under greenhouse conditions. The seedling growth and biochemical attributes were evaluated from 10-day-old seedlings. The germination parameters (percentage, mean germination time), vigor index, seedling growth (root length, seedling length, shoot fresh weight, root fresh weight, shoot dry weight, root dry weight) enhanced considerably. The laser energy levels used for seed irradiation showed variable effects on germination, seedling growth and mineral profile. The mineral contents were recorded to be higher in seedling raised from laser treated seeds, which were higher in roots versus shoots and leaves. The effect of laser treatment on seedling fat, nitrogen and protein content was insignificant and at higher energy level both nitrogen and protein contents decreased versus control. Results revealed that M. olifera germination, seedling growth and mineral contents were enhanced and optimum laser energy level has more acceleratory effect since at three laser energy levels the responses were significantly different. Overall the laser energy levels effect on germination and seedling growth was found in following order; 75mJ>50mJ>25mJ, where as in case of fat, protein and nitrogen contents the trend was as; 25mJ>50mJ and 75mJ. However, this technique could possibly be used to improve the M. olifera germination, seedling growth, and minerals contents where germination is low due to unfavorable conditions.

Effect of Urea and Borate Plasticizers on Rheological Response of Corn Starch.

Although starch based materials have an array of fascinating industrial applications, the native starches do not show good mechanical strength, thermal stability, and rheological properties for their use in the mainstream processing industry. For example, the use of starches for producing controlled release fertilizers is a new research endeavor with detailed knowledge still to come. The thermal processing of native starches with water as a plasticizer results in poor physical and pasting properties of the final product. Therefore in this study, corn starch was thermally processed with urea and borate in a water medium. The pure starch (PS), starch-urea (SU), starch-borate (SB), and starch-urea-borate (SUB) samples were prepared and characterized for their rheological traits. The PS sample exhibited a peak viscosity of 299 cP after 17 min of thermal processing. Further heating of the suspension caused a decrease in viscosity of 38 points due to thermal cracking of the starch granules. A similar trend was depicted in the viscosity measurements of SU, SB, and SUB adhesives. However, the viscosity of these samples remained slightly higher than that for PS. Also, the reduction in viscosity after the peak value was not as notable as for PS. The modified starch behaved like a gel and its storage modulus was significantly higher than the loss modulus. The lower magnitudes of storage and loss moduli revealed that the modified starch was in the form of a weak gel and not a solid. The PS is more fluid in nature with dominating loss modulus at lower angular frequencies.

Laser light and magnetic field stimulation effect on biochemical, enzymes activities and chlorophyll contents in soybean seeds and seedlings during early growth stages.

Laser and magnetic field bio-stimulation attracted the keen interest of scientific community in view of their potential to enhance seed germination, seedling growth, physiological, biochemical and yield attributes of plants, cereal crops and vegetables. Present study was conducted to appraise the laser and magnetic field pre-sowing seed treatment effects on soybean sugar, protein, nitrogen, hydrogen peroxide (H2O2) ascorbic acid (AsA), proline, phenolic and malondialdehyde (MDA) along with chlorophyll contents (Chl "a" "b" and total chlorophyll contents). Specific activities of enzymes such as protease (PRT), amylase (AMY), catalyst (CAT), superoxide dismutase (SOD) and peroxides (POD) were also assayed. The specific activity of enzymes (during germination and early growth), biochemical and chlorophyll contents were enhanced significantly under the effect of both laser and magnetic pre-sowing treatments. Magnetic field treatment effect was slightly higher than laser treatment except PRT, AMY and ascorbic acid contents. However, both treatments (laser and magnetic field) effects were significantly higher versus control (un-treated seeds). Results revealed that laser and magnetic field pre-sowing seed treatments have potential to enhance soybean biological moieties, chlorophyll contents and metabolically important enzymes (degrade stored food and scavenge reactive oxygen species). Future study should be focused on growth characteristics at later stages and yield attributes.