Multi-Functional Applications of H-Glass Embedded with Stable Plasmonic Gold Nanoislands.

Metal nanoparticles (MNPs) are synthesized using various techniques on diverse substrates that significantly impact their properties. However, among the substrate materials investigated, the major challenge is the stability of MNPs due to their poor adhesion to the substrate. Herein, it is demonstrated how a newly developed H-glass can concurrently stabilize plasmonic gold nanoislands (GNIs) and offer multifunctional applications. The GNIs on the H-glass are synthesized using a simple yet, robust thermal dewetting process. The H-glass embedded with GNIs demonstrates versatility in its applications, such as i) acting as a room temperature chemiresistive gas sensor (70% response for NO2 gas); ii) serving as substrates for surface-enhanced Raman spectroscopy for the identifications of Nile blue (dye) and picric acid (explosive) analytes down to nanomolar concentrations with enhancement factors of 4.8 × 106 and 6.1 × 105 , respectively; and iii) functioning as a nonlinear optical saturable absorber with a saturation intensity of 18.36 × 1015 W m-2 at 600 nm, and the performance characteristics are on par with those of materials reported in the existing literature. This work establishes a facile strategy to develop advanced materials by depositing metal nanoislands on glass for various functional applications.

Biological methylation: redefining the link between genotype and phenotype.

The central dogma of molecular biology is responsible for the crucial flow of genetic information from DNA to protein through the transcription and translation process. Although the sequence of DNA is constant in all organs, the difference in protein and variation in the phenotype is mainly due to the quality and quantity of tissue-specific gene expression and methylation pattern. The term methylation has been defined and redefined by various scientists in the last fifty years. There is always huge excitement around this field because the inheritance of something is beyond its DNA sequence. Advanced gene methylation studies have redefined molecular genetics and these tools are considered de novo in alleviating challenges of animal disease and production. Recent emerging evidence has shown that the impact of DNA, RNA, and protein methylation is crucial for embryonic development, cell proliferation, cell differentiation, and phenotype production. Currently, many researchers are focusing their work on methylation to understand its significant role in expression, disease-resistant traits, productivity, and longevity. The main aim of the present review is to provide an overview of DNA, RNA, and protein methylation, current research output from different sources, methodologies, factors responsible for methylation of genes, and future prospects in animal genetics.

Noninvasive treatment of psoriasis and skin rejuvenation using an akermanite-type narrowband emitting phosphor.

Psoriasis is a noncontagious, long-lasting skin infection that affects many people around the world. Numerous therapeutic artificial treatments are available for the treatment of psoriasis, such as photodynamic therapy using broadband ultraviolet (UV) lamps, which have harmful effects on human skin. Similarly, the natural healing systems such as sunlight have a higher risk of sunburn and can cause dangerous forms of skin cancer. Significant light emission of a specific wavelength (in the UV range), and phosphor-based devices demonstrate the effectiveness of treating psoriasis without damaging the skin. Gd3+ -doped calcium magnesium silicate [Ca2 MgSi2 O7 :Gd3+ ,(CMS:Gd3+ )] phosphor is one of the ideal phosphors that emit specific narrow UV wavelengths for curing psoriasis and is in great demand in the field of dermatology. Photoluminescence analysis at room temperature (~25°C) shows that the synthesized CMS:Gd3+ phosphor emits narrowband UV-B light with a peak intensity at 314 nm. Comparative studies of the standard action spectrum of psoriasis with the emission spectrum of the CMS:Gd3+ phosphor show that the synthesized phosphor was the most suitable material for treating a variety of diseases, including psoriasis, vitiligo, type-1 diabetes, dental disease, sleep and mood disorders, and other skin diseases.

Entropy Stabilization Effects and Ion Migration in 3D "Hollow" Halide Perovskites.

A recently discovered new family of 3D halide perovskites with the general formula (A)1-x(en)x(Pb)1-0.7x(X)3-0.4x (A = MA, FA; X = Br, I; MA = methylammonium, FA = formamidinium, en = ethylenediammonium) is referred to as "hollow" perovskites owing to extensive Pb and X vacancies created on incorporation of en cations in the 3D network. The "hollow" motif allows fine tuning of optical, electronic, and transport properties and bestowing good environmental stability proportional to en loading. To shed light on the origin of the apparent stability of these materials, we performed detailed thermochemical studies, using room temperature solution calorimetry combined with density functional theory simulations on three different families of "hollow" perovskites namely en/FAPbI3, en/MAPbI3, and en/FAPbBr3. We found that the bromide perovskites are more energetically stable compared to iodide perovskites in the FA-based hollow compounds, as shown by the measured enthalpies of formation and the calculated formation energies. The least stable FAPbI3 gains stability on incorporation of the en cation, whereas FAPbBr3 becomes less stable with en loading. This behavior is attributed to the difference in the 3D cage size in the bromide and iodide perovskites. Configurational entropy, which arises from randomly distributed cation and anion vacancies, plays a significant role in stabilizing these "hollow" perovskite structures despite small differences in their formation enthalpies. With the increased vacancy defect population, we have also examined halide ion migration in the FA-based "hollow" perovskites and found that the migration energy barriers become smaller with the increasing en content.

Ln2Te6O15 (Ln = La, Gd, and Eu) "Anti-Glass" Phase-Assisted Lanthanum-Tellurite Transparent Glass-Ceramics: Eu3+ Emission and Local Site Symmetry Analysis.

The presence of lanthanide-tellurite "anti-glass" nanocrystalline phases not only affects the transparency in glass-ceramics (GCs) but also influences the emission of a dopant ion. Therefore, a methodical understanding of the crystal growth mechanism and local site symmetry of doped luminescent ions when embedded into the precipitated "anti-glass" phase is crucial, which unfolds the practical applications of GCs. Here, we examined the Ln2Te6O15 "anti-glass" nanocrystalline phase growth mechanism and local site symmetry of Eu3+ ions in transparent GCs produced from 80TeO2-10TiO2-(5 - x)La2O3-5Gd2O3-xEu2O3 glasses, where x = 0, 1, 2. A crystallization kinetics study identifies a unique crystal growth mechanism via a constrained nucleation rate. The extent of "anti-glass" phase precipitation and its growth in GCs with respect to heat-treatment duration is demonstrated using X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM) analysis. Qualitative analysis of XRD confirms the precipitation of both La2Te6O15 and Gd2Te6O15 nanocrystalline phases. Rietveld refinement of powder X-ray diffraction patterns reveals that Eu3+ ions occupy "Gd" sites in Gd2Te6O15 over "La" sites in La2Te6O15. Raman spectroscopy reveals the conversion of TeO3 units to TeO4 units with Eu2O3 addition. This confirms the polymerizing role of Eu2O3 and consequently high crystallization tenacity with increasing Eu2O3 concentration. The measured Eu3+ ion photoluminescence spectra revealed its local site symmetry. Moreover, the present GCs showed adequate thermal cycling stability (∼50% at 423 K) with the highest activation energy of around 0.3 eV and further suggested that the present transparent GCs would be a potential candidate for the fabrication of red-light-emitting diodes (LEDs) or red component phosphor in W-LEDs.

Realizing cool and warm white-LEDs based on color controllable (Sr,Ba)2Al3O6F:Eu2+ phosphors obtained via a microwave-assisted diffusion method.

Globally, phosphor converted white-LEDs (W-LEDs) are among the most suitable sources to reduce energy consumption. Nevertheless, modernization of efficient broadband emitting phosphors is most crucial to improve the W-LED performance. Herein, we synthesized a series of novel broadband emitting Sr2-xAl3O6F:xEu2+ phosphors via a new microwave-assisted diffusion method. Rietveld refinement of the obtained X-ray diffraction results was performed to recognize the exact crystal phase and the various cationic sites. Oxygen vacancies (VO) formed under synthetic reducing conditions enabled Sr2Al3O6F to demonstrate bright self-activated bluish emission. Doping of Eu2+ ions unlocked the energy transfer process from the host to the activator ions, owing to which, the self-activated emission diminished and the Eu2+-doped sample showed amplified bluish-green emission. The gradual increase in Eu2+ concentrations regulated the controllable emissions from the bluish (0.34, 0.42) to the greenish (0.38, 0.43) zone under UV excitation. Because of the different absorption preferences of Eu2+ ions located at the different Sr2+ sites, Sr2-xAl3O6F:xEu2+ exhibited bluish-white emission under blue irradiation. A further enhancement in PL intensity had been observed by the cation substitution of Ba2+ for Sr2+ sites in the optimum Sr1.95Al3O6F:0.05Eu2+ phosphor. The as-fabricated W-LEDs utilizing the optimized Sr1.75Ba0.2Al3O6F:0.05Eu2+ phosphor exhibited a cool-white light emission along with a 372 nm NUV-LED and a 420 nm blue-LED with a moderate CRI of 70 and a CCT above 6000 K. Such cool white emission was controlled to natural white with the CCT close to 5000 K, and the CRI above 80 via utilizing a suitable red emitting phosphor. The W-LED performances of the optimized phosphor justified its applicability to produce white light for lighting applications.

Influence of gold nanoparticles on the nonlinear optical and photoluminescence properties of Eu2O3 doped alkali borate glasses.

Alkali borate glasses activated with trivalent europium ions and rooted with gold (Au) nanoparticles (NPs) were synthesised through a melt quenching process involving a selective thermochemical reduction and their applicability as photonic materials was assessed in detail. Non-linear optical (NLO) measurements were performed using a Z-scan approach in the wavelength range of 700-1000 nm. The open aperture Z-scan signatures for the Eu3+-containing glasses embedded with and without the Au NPs established a reverse saturable absorption (RSA) at all of the studied wavelengths ascribed to the two-photon absorption (2PA). Surprisingly, the nonlinear optical absorption switched to a saturable absorption (SA) with an increase in the concentration of AuCl3. With the incorporation of the Au NPs, the UV excited photoluminescence (PL) intensity of the Eu3+-doped glasses increased first as a consequence of the local field enhancement by the Au NPs, and subsequently decreased at a higher concentration of AuCl3 due to the reverse energy transfer from the Eu3+ ion to the Au0 NPs. The electronic polarization effect of the host glass enhanced the 5D0→7F4 transition intensity on the incorporation of the gold NPs owing to the gold NP-embedded glasses showing a deep-red emission. The NLO and PL studies suggested that the investigated glasses containing a 0.01 mol% of AuCl3 is practically appropriate for photonic applications.

Layered Double Hydroxides: Proposal of a One-Layer Cation-Ordered Structure Model of Monoclinic Symmetry.

Layered double hydroxides are obtained by partial isomorphous substitution of divalent metal ions by trivalent metal ions in the structure of mineral brucite, Mg(OH)2. The widely reported three-layer polytype of rhombohedral symmetry, designated as polytype 3R1, is actually a one-layer polytype of monoclinic symmetry (space group C2/m, a = 5.401 Å, b = 9.355 Å, c = 11.02 Å, ß = 98.89°). This structure has a cation-ordered metal hydroxide layer defined by a supercell a = √3 × a0; b = 3 × a0 (a0 = cell parameter of the cation-disordered rhombohedral cell). Successive layers are translated by (1/3, 0, 1) relative to one another. When successive metal hydroxide layers are translated by (2/3, 0, 1) relative to one another, the resultant crystal, also of monoclinic symmetry, generates a powder pattern corresponding to the polytype hitherto designated as 3R2. This structure model not only removes all the anomalies intrinsic to the widely accepted cation-disordered structure but also abides by Pauling's rule that forbids trivalent cations from occupying neighboring sites and suggests that it is unnecessary to invoke rhombohedral symmetry when the metal hydroxide layer is cation ordered. These results have profound implications for the correct description of polytypism in this family of layered compounds.

Dual antiplatelet therapy in acute coronary syndromes and coronary artery interventions.

Optimization of platelet inhibition in patients with acute coronary syndromes reduces the risk for ischemic events, but at the same time increases the risk for bleeding. There are several predictors of bleeding risk in patients with acute coronary syndromes. These include demographic variables such as advanced age, female gender, low body weight, concomitant diseases such as diabetes,renal insufficiency, noncardiac vascular disease such as cerebral vascular disease and a history of bleeding. It also includes the type of acute coronary syndromes such as patients presenting with ST segment elevation myocardial infarction, high killip class and low blood pressure. The diabetic population contains a higher proportion of patients who do not respond to antiplatelet drugs as expected and who also have more activated platelets that deserve very vigorous inhibition. The importance of dual antiplatelet therapy in patients undergoing balloon angioplasty and stenting is much discussed. Yet there are some questions which are to be answered clearly such as the following:- 1) In the need to balance the benefit of clot prevention with bleeding risk, is it better to continue dual antiplatelet therapy for longer than one year? 2) If so, is this benefit specific to drug eluting stents or to a more general population of stent patients? 3) Is the benefit mediated by prevention of stent thrombosis or is there a global reduction in cardiovascular risk? This review is to understand all these aspects and help a physician use antiplatelet drugs appropriately in day to day clinical practice for better patient outcomes.

Renal artery stenting: one year outcome on BP control and antihypertensive medication.

AIM: There is lot of controversy regarding the efficacy of renal artery stenting in atherosclerotic renal artery stenosis. The aim of this retrospective study is to evaluate blood pressure control and requirement of antihypertensive drugs after renal artery stenting. METHODS AND RESULTS: Eighty patients who have undergone renal artery stenting for atherosclerotic renal artery stenosis with hypertension were evaluated and followed up for one year. Those with procedural complications were excluded. The systolic and diastolic BP control, number of medications, their dosage and serum creatinine levels were assessed at 3 months and at one year. At the end of one year 3 patients had total cure (all 3 had bilateral renal artery stenting). In 30 patients, there was reduction in number of drugs and in 11 patients there was reduction in dosage of antihypertensive drugs. In 16 patients there was a need to change the class of drugs. In 16 patients same drugs and dosage were continued. In 4 patients, the dose was increased. CONCLUSIONS: At the end of one year, 3 patients had cure, 44 patients improved and there was no change in 33 patients. Our results are comparable to other reported series. Renal artery stenting is a cost effective approach in properly selected patients of renal artery stenosis with hypertension.

Thermal spray processes influencing surface chemistry and in-vitro hemocompatibility of hydroxyapatite-based orthopedic implants.

Orthopedic implants made from titanium are a popular choice in the medical field because of their remarkable strength-to-weight ratio. Nevertheless, they may not interact well with human blood, resulting in thrombosis and hemolysis. In fact, non-hemocompatibility is believed to be responsible for about 31 % of medical device failures in the US alone, requiring painful and expensive revision surgery. To address this issue, bioactive hydroxyapatite coatings are applied to Ti-6Al-4V implants using thermal spray techniques. However, the temperature used during thermal processing impacts the coating's surface properties, affecting the mechanical and biological properties. Furthermore, the effectiveness of HA coatings on titanium for orthopedic applications has not been validated by biocompatibility tests, particularly hemocompatibility. In this study, we aimed to investigate the relative efficacy of three thermal spray processes of different temperature ranges: Atmospheric plasma spray (APS) (high temperature), Flame spray (FS) (moderate temperature), and High-Velocity Oxy-Fuel spray (HVOF) (low temperature), and study their impact on coating's surface properties, affecting blood components and implant's strength. The crystallinity of the HA coating increased by 32 % with a decrease in the operating temperature (APS < FS < HVOF). HVOF coating exhibited a ~ 34 % and ~ 120 % improvement in adhesion strength and ~ 31 % and 59 % increment in hardness compared to APS and FS coating, respectively, attributed to its low porosity, low coating thickness (~55 µm), and high degree of crystallinity. The HVOF coating showcased a significant increase in non-hemolytic behavior, with hemolysis rates ~8 and ~ 11 times lower than APS and FS coatings, respectively, owing to its smooth texture and high degree of crystallinity (p < 0.05). Furthermore, the HVOF coating exhibited minimal blood clotting based on the whole blood clotting assay, again confirmed by PT and aPTT assays showing delayed clotting time, indicating its non-thrombogenic behavior. The number of platelets adhered to the three coatings showed no significant difference compared to Ti-6Al-4V. APS and FS coatings showed low platelet activation, unlike HVOF coating and titanium, which revealed round platelets, similar to the negative control. Neither titanium nor HA coatings exhibited antibacterial properties, which may be due to their high affinity for organic substances, which promotes bacterial adhesion and replication. Among the three thermal processes, HVOF coating displayed good apatite growth, non-hemolytic, and non-thrombogenicity with no platelet activation owing to its low processing temperature, high degree of crystallinity (89.7 %), hydrophilicity, smooth (~4 µm) and dense (~97 %) microstructural properties. The results demonstrated that the HVOF-HA coating presented in this work meets the hemocompatible requirements and shows promise for prospective application as an orthopedic implant. Furthermore, this study has the potential to significantly reduce the use of animals in in-vivo research and improve their welfare while also cutting costs.

Effect of Surface Chemistry on Hemolysis, Thrombogenicity, and Toxicity of Carbon Nanotube Doped Thermally Sprayed Hydroxyapatite Implants.

Assessing blood compatibility is crucial before in vivo procedures and is considered more reliable than many in vitro tests. This study examines the physiochemical properties and blood compatibility of bioactive powders ((0.5-2 wt % carbon nanotube (CNT)/alumina)-20 wt %)) produced through a heterocoagulation colloidal technique followed by ball milling with hydroxyapatite (HAp). The 1 wt % CNT composite demonstrated a surface charge ∼5 times higher than HAp at pH 7.4, with a value of -11 mV compared to -2 mV. This increase in electrostatic charge is desirable for achieving hemocompatibility, as evidenced by a range of blood compatibility assessments, including hemolysis, blood clotting, platelet adhesion, platelet activation, and coagulation assays (prothrombin time (PT) and activated partial thrombin time (aPTT)). The 1 wt % CNT composite exhibited hemolysis ranging from 2 to 7%, indicating its hemocompatibility. In the blood clot investigation, the absorbance values for 1-2 wt % CNT samples were 0.927 ± 0.038 and 1.184 ± 0.128, respectively, indicating their nonthrombogenicity. Additionally, the percentage of platelet adhered on the 1 wt % CNT sample (∼5.67%) showed a ∼2.5-fold decrement compared to the clinically used negative control, polypropylene (∼13.73%). The PT and aPTT experiments showed no difference in the coagulation time for CNT samples even at higher concentrations, unlike HAC2 (80 mg). In conclusion, the 1 wt % CNT sample was nontoxic to human blood, making it more hemocompatible, nonhemolytic, and nonthrombogenic than other samples. This reliable study reduces the need for additional in vitro and in vivo studies before clinical trials, saving time and cost.

SPECT in asymptomatic diabetics with and without microalbuminuria.

OBJECTIVE: To identify coronary artery disease (CAD) in asymptomatic diabetics with the help of myocardial perfusion single photon emission computed tomography (MPS), a non-invasive imaging modality and its correlation in diabetics with or without microalbuminuria. METHODS: This study included 99 patients in the age group of 30 to 80 years who were asymptomatic but possessed one or more risk factors for CAD. These patients were divided into two groups, diabetics with and without microalbuminuria (Micral). Thirty eight patients were Micral positive and 61 were Micral negative. Ischemia was detected by MPS and compared with coronary angiographic findings in both the groups. RESULTS: Amongst the 99 diabetic patients, MPS was positive in 39 patients. Out of 39 MPS positive patients, 31(79.5%) were micral positive and 8 (20.5%) were micral negative. Out of 38 micral positive patients, 31 patients were positive on MPS and 27 had significant angiographic (CAG) findings. Those with micral positive and MPS positive had multivessel CAD by CAG. It was seen that MPS status was 91.4% sensitive, 74.1% specific and had 82.1% positive predictive values (PPV) and 87.0% negative predictive value (NPV) for detection of significant CAD. CONCLUSION: Microalbuminuria is an inexpensive screening tool and a powerful independent predictor for major cardiovascular events in patients with type 2 diabetes mellitus. MPS is a sensitive, non invasive diagnostic test for identification of CAD in asymptomatic diabetic patients.

Experimental Investigation of Thermodynamic Stabilization in Boron Imidazolate Frameworks (BIFs) Synthesized by Mechanochemistry.

This study experimentally explores the energetics for the formation of boron-imidazolate frameworks (BIFs), which are synthesized by mechanochemistry. The topologically similar frameworks employ the same tetratopic linker based on tetrakis(imidazolyl)boric acid but differ in the monovalent cation metal nodes. This permits assessment of the stabilizing effect of metal nodes in frameworks with sodalite (SOD) and diamondoid (dia) topologies. The enthalpy of formation from endmembers (metal oxide and linker), which define thermodynamic stability of the structures, has been determined by use of acid solution calorimetry. The results show that heavier metal atoms in the node promote greater energetic stabilization of denser structures. Overall, in BIFs the relation between cation descriptors (ionic radius and electronegativity) and thermodynamic stability depends on framework topology. Thermodynamic stability increases with the metallic character of the cation employed as the metal node, independent of the framework topology. The results suggest unifying aspects for thermodynamic stabilization across MOF systems.

Integrated Circular Economy Model System for Direct Lithium Extraction: From Minerals to Batteries Utilizing Aluminum Hydroxide.

Aluminum hydroxide, an abundant mineral found in nature, exists in four polymorphs: gibbsite, bayerite, nordstrandite, and doyleite. Among these polymorphs gibbsite, bayerite, and commercially synthesized amorphous aluminum hydroxide have been investigated as sorbent materials for lithium extraction from sulfate solutions. The amorphous form of Al(OH)3 exhibits a reactivity higher than that of the naturally occurring crystalline polymorphs in terms of extracting Li+ ions. This study employed high-temperature oxide melt solution calorimetry to explore the energetics of the sorbent polymorphs. The enthalpic stability order was measured to be gibbsite > bayerite > amorphous Al(OH)3. The least stable form, amorphous Al(OH)3, undergoes a spontaneous reaction with lithium, resulting in the formation of a stable layered double hydroxide phase. Consequently, amorphous Al(OH)3 shows promise as a sorbent material for selectively extracting lithium from clay mineral leachate solutions. This research demonstrates the selective direct extraction of Li+ ions using amorphous aluminum hydroxide through a liquid-solid lithiation reaction, followed by acid-free delithiation and relithiation processes, achieving an extraction efficiency of 86%, and the maximum capacity was 37.86 mg·g-1 in a single step during lithiation. With high selectivity during lithiation and nearly complete recoverability of the sorbent material during delithiation, this method presents a circular economy model. Furthermore, a life cycle analysis was conducted to illustrate the environmental advantages of replacing the conventional soda ash-based precipitation process with this method, along with a simple operational cost analysis to evaluate reagent and fuel expenses.

Slug Flow Coprecipitation Synthesis of Uniformly-Sized Oxalate Precursor Microparticles for Improved Reproducibility and Tap Density of Li(Ni0.8Co0.1Mn0.1)O2 Cathode Materials.

The microparticle quality and reproducibility of Li(Ni0.8Co0.1Mn0.1)O2 (NCM811) cathode materials are important for Li-ion battery performance but can be challenging to control directly from synthesis. Here, a scalable reproducible synthesis process is designed based on slug flow to rapidly generate uniform micron-size spherical-shape NCM oxalate precursor microparticles at 25-34 °C. The whole process takes only 10 min, from solution mixing to precursor microparticle generation, without needing aging that typically takes hours. These oxalate precursors are convertible to spherical-shape NCM811 oxide microparticles, through a preliminary design of low heating rates (e.g., 0.1 and 0.8 °C/min) for calcination and lithiation. The outcome oxide cathode particles also demonstrate improved tap density (e.g., 2.4 g mL-1 for NCM811) and good specific capacity (202 mAh g-1 at 0.1 C) in coin cells and reasonably good cycling performance with LiF coating.

Systemic lupus erythematosus presenting as cardiac tamponade-a case report.

Although pericarditis and pericardial effusion (PE) are some of the common manifestations of systemic lupus erythematosus (SLE), the occurrence of cardiac tamponade is quite rare. We present herewith a young girl with cardiac tamponade presenting as initial manifestation of SLE.

Probing Capacity Trends in MLi2Ti6O14 Lithium-Ion Battery Anodes Using Calorimetric Studies.

Due to higher packing density, lower working potential, and area specific impedance, the MLi2Ti6O14 (M = 2Na, Sr, Ba, and Pb) titanate family is a potential alternative to zero-strain Li4Ti5O12 anodes used commercially in Li-ion batteries. However, the exact lithiation mechanism in these compounds remains unclear. Despite its structural similarity, MLi2Ti6O14 behaves differently depending on charge and size of the metal ion, hosting 1.3, 2.7, 2.9, and 4.4 Li per formula unit, giving charge capacity values from 60 to 160 mAh/g in contrast to the theoretical capacity trend. However, high-temperature oxide melt solution calorimetry measurements confirm strong correlation between thermodynamic stability and the observed capacity. The main factors controlling energetics are strong acid-base interactions between basic oxides MO, Li2O and acidic TiO2, size of the cation, and compressive strain. Accordingly, the energetic stability diminishes in the order Na2Li2Ti6O14 > BaLi2Ti6O14 > SrLi2Ti6O14 > PbLi2Ti6O14. This sequence is similar to that in many other oxide systems. This work exhibits that thermodynamic systematics can serve as guidelines for the choice of composition for building better batteries.

Facile synthesis and phase stability of Cu-based Na2Cu(SO4)2·xH2O (x = 0-2) sulfate minerals as conversion type battery electrodes.

Mineral exploration forms a key approach for unveiling functional battery electrode materials. The synthetic preparation of naturally found minerals and their derivatives can aid in designing of new electrodes. Herein, saranchinaite Na2Cu(SO4)2 and its hydrated derivative kröhnkite Na2Cu(SO4)2·2H2O bisulfate minerals have been prepared using a facile spray drying route for the first time. The phase stability relation during the (de)hydration process was examined synergising in situ X-ray diffraction and thermochemical studies. Kröhnkite forms the thermodynamically stable phase as the hydration of saranchinaite to kröhnkite is highly exothermic (-51.51 ± 0.63 kJ mol-1). Structurally, kröhnkite offers a facile 2D pathway for Na+ ion migration resulting in 20 times higher total conductivity than saranchinaite at 60 °C. Both compounds exhibited a conversion redox mechanism for Li-ion storage with the first discharge capacity exceeding 650 mA h g-1 (at 2 mA g-1vs. Li+/Li) upon discharge up to 0.05 V. Post-mortem analysis revealed that the presence of metallic Cu in the discharged state is responsible for high irreversibility during galvanostatic cycling. This study reaffirms the exploration of Cu-based polyanionic sulfates, which while having limited (de)insertion properties, can be harnessed for conversion-based electrode materials for batteries.

A Comparison of Order-Disorder in Several Families of Cubic Oxides.

Order-disorder on both cation and oxygen sites is a hallmark of fluorite-derived structures, including pyrochlores. Ordering can occur on long- and short-range scales and can result in persistent metastable states. In various cubic oxide systems, different types of disorder are seen. The purpose of this paper is to review and compare the types and energetics of order-disorder phenomena in several families of cubic oxides having pyrochlore, weberite, defect fluorite, perovskite, rocksalt, and spinel structures. The goal is to better understand how structure, composition, and thermodynamic parameters (enthalpy and entropy) determine the feasibility of different competing ordering processes and structures in these diverse systems.