A simple graphene modified electrode for the determination of antimony(III) in edible plants and beverage.

Antimony(III) is a rare electroactive specie present on Earth, whose concentration is not typically determined. The presence of high concentrations of antimony is responsible for a variety of diseases, which makes it desirable to find convenient and reliable methods for its determination. We have developed a convenient glassy carbon modified electrode with electroreduced graphene oxide GC/rGO for the first time determination of Sb(III) in commercial lettuce, celery, and beverages. The surface of the electrode was characterized by scanning electron microscopy (SEM) and cyclic voltammetry, indicating a heterogeneous and rough surface with a real area of 0.28 cm2, which is ~2.5 times the area of GC. The optimal chemical and electrochemical parameters used were: sodium acetate buffer (pH = 4.3), an accumulation potential of -1.0 V and an accumulation time of 150 s. The analytical validation was developed evaluating the linear range (10-60 µg L-1), limit of detection (2.5 µg L-1), accuracy, repetibility and reproducibility with satisfactory results (relative standard deviation (RSD) values lower than 10%). All the analyzes performed in real samples by stripping voltammetry were compared with GF-AAS, showing statistically similar values, demonstrating that GC/rGO could be effectively applied in the analysis of food samples.

Inexpensive and green electrochemical sensor for the determination of Cd(II) and Pb(II) by square wave anodic stripping voltammetry in bivalve mollusks.

An inexpensive and environmental friendly electrochemical sensor based on a glassy carbon electrode (GC) modified with graphene quantum dots (GQDs) and Nafion (NF) has been developed for the determination of Cd(II) and Pb(II) in bivalve mollusks using square wave anodic stripping voltammetry (SWASV). GQDs were characterized by UV-Vis spectroscopy, fluorescence and transmission electronic microscopy (TEM). The modified electrode was evaluated by cyclic voltammetry, scanning electronic microscopy (SEM) and electrochemical impedance spectroscopy (EIS). A linearity of 20-200 µg L-1 was found, with a limit of detection (LOD) of 11.30 µg L-1 for Cd(II) and 8.49 µg L-1 for Pb(II). The proposed methodology was validated with a certified reference material TMDA-64.2. The reproducibility of GC/GQDs-NF for both species had an RSD of less than 10%. The results were compared with ICP-OES. The method was applied in the determination of Cd(II) and Pb(II) in bivalve mollusks samples with excellent results.