High-efficiency triplet-triplet annihilation upconversion microemulsion with facile preparation and decent air tolerance.

Current research of triplet-triplet annihilation upconversion (TTA-UC) faces difficulty such as overuse of organic solvents and quenching of excited triplet sensitizers by molecular oxygen. Herein, we propose an efficient and facile preparation strategy of TTA-UC microemulsion to overcome these issues. With simple device and short preparation process, air-stable TTA-UC with a high upconversion efficiency of 16.52% was achieved in microemulsion coassembled from TritonX114, tetrahydrofuran and upconverting chromophores (platinum octaethyl-porphyrin and 9,10-diphenylanthracene). This is comparable to the highest UC efficiency ever reported for TTA-UC microemulsion systems. The excellent UC performance of TX114-THF could be attributed to two perspectives. Firstly, small-size micelle accommodated chromophores up to high concentrations in organic phase, which promoted efficient molecular collision. Additionally, high absorbance at 532 nm ensured full use of excitation light, getting more long wavelength photons involved in the TTA-UC process. Moreover, air-stable TTA-UC also performed well in microemulsion with various surfactants, including nonionic surfactants (Tween 20, Tween 80, Triton X-110, Triton X-114), ionic surfactants (sodium dodecyl sulfate, cetyltrimethyl ammonium bromide) and block copolymers (pluronic F127, pluronic P123), through three conjectural assembly models according to the structural characteristics of surfactant molecules (concentrated, uncompacted and scattered). These discoveries could provide estimable reference for selection of surfactants in relevant fields of TTA-UC.

Precise molecular engineering for the preparation of pyridinium photosensitizers with efficient ROS generation and photothermal conversion.

Organic photosensitizers (PSs) with aggregation-induced emission properties have great development potential in the integrated application of multi-mode diagnosis and treatment of photodynamic therapy (PDT) and photothermal therapy (PTT). However, preparing high-quality PSs with both optical and biological properties, high reactive oxygen species (ROS) and photothermal conversion ability are undoubtedly a great challenge. In this work, a series of pyridinium AIE PSs modified with benzophenone have been synthesized. A wide wavelength range of fluorescent materials was obtained by changing the conjugation and donor-acceptor strength. TPAPs5 has a significant advantage over similar compounds, and we have also identified the causes of high ROS generation and high photothermal conversion in terms of natural transition orbitals, excited state energy levels, ground-excited state configuration differences and recombination energy. Interestingly, migration of target sites was also found in biological imaging experiments, which also provided ideas for the design of double-targeted fluorescent probes. Therefore, the present work proposed an effective molecular design strategy for synergistic PDT and PTT therapy.

Novel Photocatalyst Based on Through-Space Charge Transfer Induced Intersystem Crossing Enables Rapid and Efficient Polymerization Under Low-Power Excitation Light.

Currently, most photoredox catalysis polymerization systems are limited by high excitation power, long polymerization time, or the requirement of electron donors due to the precise design of efficient photocatalysts still poses a great challenge. Herein, we propose a new approach: the creation of efficient photocatalysts having low ground state oxidation potentials and high excited state energy levels, along with through-space charge transfer (TSCT) induced intersystem crossing (ISC) properties. A cabazole-naphthalimide (NI) dyad (NI-1) characterized by long triplet excited state lifetime (τT=62 µs), satisfactory ISC efficiency (ΦΔ=54.3 %) and powerful reduction capacity [Singlet: E1/2 (PC+1/*PC)=-1.93 eV, Triplet: E1/2 (PC+1/*PC)=-0.84 eV] was obtained. An efficient and rapid polymerization (83 % conversion of 1 mM monomer in 30 s) was observed under the conditions of without electron donor, low excitation power (10 mW cm-2) and low catalyst (NI-1) loading (<50 µM). In contrast, the conversion rate was lower at 29 % when the reference catalyst (NI-4) was used for photopolymerization under the same conditions, demonstrating the advantage of the TSCT photocatalyst. Finally, the TSCT material was used as a photocatalyst in practical lithography for the first time, achieving pattern resolutions of up to 10 µm.

Synergetic Modulation of Steric Hindrance and Excited State for Anti-Quenching and Fast Spin-Flip Multi-Resonance Thermally Activated Delayed Fluorophore.

Multi-resonance thermally activated delayed fluorescence (MR-TADF) materials hold great promise for advanced high-resolution organic light-emitting diode (OLED) displays. However, persistent challenges, such as severe aggregation-caused quenching (ACQ) and slow spin-flip, hinder their optimal performance. We propose a synergetic steric-hindrance and excited-state modulation strategy for MR-TADF emitters, which is demonstrated by two blue MR-TADF emitters, IDAD-BNCz and TIDAD-BNCz, bearing sterically demanding 8,8-diphenyl-8H-indolo[3,2,1-de]acridine (IDAD) and 3,6-di-tert-butyl-8,8-diphenyl-8H-indolo[3,2,1-de]acridine (TIDAD), respectively. These rigid and bulky IDAD/TIDAD moieties, with appropriate electron-donating capabilities, not only effectively mitigate ACQ, ensuring efficient luminescence across a broad range of dopant concentrations, but also induce high-lying charge-transfer excited states that facilitate triplet-to-singlet spin-flip without causing undesired emission redshift or spectral broadening. Consequently, implementation of a high doping level of IDAD-BNCz resulted in highly efficient narrowband electroluminescence, featuring a remarkable full-width at half-maximum of 34 nm and record-setting external quantum efficiencies of 34.3 % and 31.8 % at maximum and 100 cd m-2, respectively. The combined steric and electronic effects arising from the steric-hindered donor introduction offer a compelling molecular design strategy to overcome critical challenges in MR-TADF emitters.

Anion-Counterion Strategy toward Organic Cocrystal Engineering for Near-Infrared Photothermal Conversion and Solar-Driven Water Evaporation.

An anion-counterion strategy is proposed to construct organic mono-radical charge-transfer cocrystals for near-infrared photothermal conversion and solar-driven water evaporation. Ionic compounds with halogen anions as the counterions serve as electron donors, providing the necessary electrons for efficient charge transfer with unchanged skeleton atoms and structures as well as the broad red-shifted absorption (200-2000 nm) and unprecedented photothermal conversion efficiency (~90.5 %@808 nm) for the cocrystals. Based on these cocrystals, an excellent solar-driven interfacial water evaporation rate up to 6.1±1.1 kg ⋅ m-2 ⋅ h-1 under 1 sun is recorded due to the comprehensive evaporation effect from the cocrystal loading in polyurethane foams and chimney addition, such performance is superior to the reported results on charge-transfer cocrystals or other materials for solar-driven interfacial evaporation. This prototype exhibits the great potential of cocrystals prepared by the one-step mechanochemistry method in practical large-scale seawater desalination applications.

Defects-Abundant Ga2 O3 Nanobricks Enabled Multifunctional Solid Polymer Electrolyte for Superior Lithium-Metal Batteries.

Polyethylene oxide (PEO)-based polymer electrolytes with good flexibility and viscoelasticity, low interfacial resistance, and fabricating cost have caught worldwide attention, but their practical application is still hampered by the instability at high voltages and the low ionic conductivity (10-8 to 10-6  S cm-1 ). Herein, we rationally designed defects-abundant Ga2 O3 nanobricks as multifunctional fillers and constructed a PEO-based organic-inorganic electrolyte for lithium metal batteries. Due to the abundant O-defects feature of Ga2 O3 filler, this PEO-based composite electrolyte not only broadens electrochemical stability window (over 5.3 V versus Li/Li+ ) but also in situ forms a Li-Ga alloy and solid electrolyte interphase (SEI) film during the cycling process causing a rapid diffusion of Li+ ions. The as-prepared electrolyte has good interface compatibility with Li metal (without short-circuiting over 500 h at 0.2 mA cm-2 ) and possesses superior high ionic conductivity. The assembled all-solid-state LiFePO4 //Li cells attained an excellent cycling performance of 146 mAh g-1 over 100 cycles at 0.5 C. The XPS analysis reveals that Ga2 O3 nanobricks can form in situ a Li-Ga alloy layer at the polymer/anode interface. This work shed a light on designing high ionic conductivity lithium alloys in the composite electrolyte, which can improve the electrochemical properties of PEO-based polymer electrolytes.

Tuning the Photocatalytic Performance of Ruthenium(II) Polypyridine Complexes Via Ligand Modification for Visible-Light-Induced Phosphorylation of Tertiary Aliphatic Amines.

Tuning the redox potential of commonly available photocatalyst to improve the catalytic performance or expand its scope for challenging synthetic conversions is an ongoing demand in synthetic chemistry. Herein, the excited state properties and redox potential of commercially available [Ru(bpy)3 ]2+ photocatalyst were tuned by modifying the structure of the bipyridine ligands with electron-donating/withdrawing units. The visible-light-mediated photoredox phosphorylation of tertiary aliphatic amines was demonstrated under mild conditions. A series of cross-dehydrogenative coupling reactions were performed employing the RuII complexes as photocatalyst giving the corresponding α-aminophosphinoxides and α-aminophosphonates via carbon-phosphorus (C-P) bond formation.

Direct Benzylic C-H Functionalization with Fluorenones under Visible-Light Irradiation.

An external photocatalyst-free benzylic C-H functionalization with fluorenones under visible-light irradiation has been achieved. This transformation provides an efficient synthetic approach to 9-benzylated fluorenols in ≤91% yield with 100% atom economy under mild conditions. Spectroscopic studies suggest that a reductive quenching of photoexcited fluorenones with toluene derivatives generates ketyl radicals and benzyl radicals, which undergo a cross-coupling to afford the desired fluorenols.

Red/NIR emissive aggregation-induced emission-active photosensitizers with strong donor-acceptor strength for image-guided photodynamic therapy of cancer.

Light-mediated therapies such as photodynamic therapy (PDT) are considered emerging cancer treatment strategies. However, there are still lots of defect with common photosensitizers (PSs), such as short emission wavelength, weak photostability, poor cell permeability, and low PDT efficiency. Therefore, it is very important to develop high-performance PSs. Recently, luminogens with aggregation-induced emission (AIE) characteristics and red/near-infrared (NIR) emissive have been reported as promising PSs for image-guided cancer therapy, due to them being able to prevent autofluorescence in physiological environments, their enhanced fluorescence in the aggregated state, and generation of reactive oxygen species (ROS). Herein, we developed PSs named TBTCPM and MTBTCPM with donor-acceptor (D-A) structures, strong red/NIR, excellent targeting specificities to good cell permeability, and high photostability. Interestingly, both of them can efficiently generate ROS under white light irradiation and possess excellent killing effect on cancer cells. This study, thus, not only demonstrates applications in cell image-guided PDT cancer therapy performances but also provides strategy for construction of AIEgens with long emission wavelengths.

Nine-Electron Transfer of Binder Synergistic π-d Conjugated Coordination Polymers as High-Performance Lithium Storage Materials.

To solve the problems such as the dissolution and the poor conductivity of organic small molecule electrode materials, we construct π-d conjugated coordination polymer Ni-DHBQ with multiple redox-active centers as lithium storage materials. It exhibits an ultra-high capacity of 9-electron transfers, while the π-d conjugation and the laminar structure inside the crystal ensure fast electron transport and lithium ion diffusion, resulting in excellent rate performance (505.6 mAh g-1 at 1 A g-1 after 300 cycles). The interaction of Ni-DHBQ with the binder CMC synergistically inhibits its dissolution and anchors the Ni atoms, thus exhibiting excellent cycling stability (650.7 mAh g-1 at 0.1 A g-1 after 100 cycles). This work provides insight into the mechanism of lithium storage in π-d conjugated coordination polymers and the synergistic effect of CMC, which will contribute to the molecular design and commercial application of organic electrode materials.

Efficient Intersystem Crossing and Long-lived Charge-Separated State Induced by Through-Space Intramolecular Charge Transfer in a Parallel Geometry Carbazole-Bodipy Dyad.

The design of efficient heavy atom-free triplet photosensitizers (PSs) based on through bond charge transfer (TBCT) features is a formidable challenge due to the criteria of orthogonal donor-acceptor geometry. Herein, we propose using parallel (face-to-face) conformation carbazole-bodipy donor-acceptor dyads (BCZ-1 and BCZ-2) featuring through space intramolecular charge transfer (TSCT) process as efficient triplet PS. Efficient intersystem crossing (ΦΔ =61 %) and long-lived triplet excited state (τT =186 µs) were observed in the TSCT dyad BCZ-1 compared to BCZ-3 (ΦΔ =0.4 %), the dyad involving TBCT, demonstrating the superiority of the TSCT approach over conventional donor-acceptor system. Moreover, the transient absorption study revealed that TSCT dyads have a faster charge separation and slower intersystem crossing process induced by charge recombination compared to TBCT dyad. A long-lived charge-separated state (CSS) was observed in the BCZ-1 (τCSS =24 ns). For the first time, the TSCT dyad was explored for the triplet-triplet annihilation upconversion, and a high upconversion quantum yield of 11 % was observed. Our results demonstrate a new avenue for designing efficient PSs and open up exciting opportunities for future research in this field.

Eutectic-Based Polymer Electrolyte with the Enhanced Lithium Salt Dissociation for High-Performance Lithium Metal Batteries.

The deployment of lithium metal anode in solid-state batteries with polymer electrolytes has been recognized as a promising approach to achieving high-energy-density technologies. However, the practical application of the polymer electrolytes is currently constrained by various challenges, including low ionic conductivity, inadequate electrochemical window, and poor interface stability. To address these issues, a novel eutectic-based polymer electrolyte consisting of succinonitrile (SN) and poly (ethylene glycol) methyl ether acrylate (PEGMEA) is developed. The research results demonstrate that the interactions between SN and PEGMEA promote the dissociation of the lithium difluoro(oxalato) borate (LiDFOB) salt and increase the concentration of free Li+ . The well-designed eutectic-based PAN1.2 -SPE (PEGMEA: SN=1: 1.2 mass ratio) exhibits high ionic conductivity of 1.30 mS cm-1 at 30 °C and superior interface stability with Li anode. The Li/Li symmetric cell based on PAN1.2 -SPE enables long-term plating/stripping at 0.3 and 0.5 mA cm-2 , and the Li/LiFePO4 cell achieves superior long-term cycling stability (capacity retention of 80.3 % after 1500 cycles). Moreover, Li/LiFePO4 and Li/LiNi0.6 Co0.2 Mn0.2 O2 pouch cells employing PAN1.2 -SPE demonstrate excellent cycling and safety characteristics. This study presents a new pathway for designing high-performance polymer electrolytes and promotes the practical application of high-stable lithium metal batteries.

Photo-controllable Luminescence from Radicals Leading to Ratiometric Emission Switching via Dynamic Intermolecular Coupling.

The development of photoinduced luminescent radicals with dynamic emission color is still challenging. Herein we report a novel molecular radical system (TBIQ) that shows photo-controllable luminescence, leading to a wide range of ratiometric color changes via light excitation. The conjugated skeleton of TBIQ is decorated with steric-demanding tertiary butyl groups that enable appropriate intermolecular interaction to make dynamic intermolecular coupling possible for controllable behaviors. We reveal that the helicenic pseudo-planar conformation of TBIQ experiences a planarization process after light excitation, leading to more compactly stacked supermolecules and thus generating radicals via intermolecular charge transfer. The photo-controllable luminescent radical system is employed for a high-level information encryption application. This study may offer unique insight into molecular dynamic motion for optical manufacturing and broaden the scope of smart-responsive materials for advanced applications.

Red Light-Emitting Thermally-Activated Delayed Fluorescence of Naphthalimide-Phenoxazine Electron Donor-Acceptor Dyad: Time-Resolved Optical and Magnetic Spectroscopic Studies.

We prepared an orthogonal compact electron-donor (phenoxazine, PXZ)-acceptor (naphthalimide, NI) dyad (NI-PXZ), to study the photophysics of the thermally-activated delayed fluorescence (TADF), which has a luminescence lifetime of 16.4 ns (99.2 %)/17.0 µs (0.80 %). A weak charge transfer (CT) absorption band was observed for the dyad, indicating non-negligible electronic coupling between the donor and acceptor at the ground state. Femtosecond transient absorption spectroscopy shows a fast charge separation (CS) (ca. 2.02∼2.72 ps), the majority of the singlet CS state is short-lived, especially in polar solvents (τCR = 10.3 ps in acetonitrile, vs. 1.83 ns in toluene, 7.81 ns in n-hexane). Nanosecond transient absorption spectroscopy detects a long-lived transient species in n-hexane, which is with a mixed triplet local excited state (3 LE) and charge separated state (3 CS), the lifetime is 15.4 µs. In polar solvents, such as tetrahydrofuran and acetonitrile, a neat 3 CS state was observed, whose lifetimes are 226 ns and 142 ns, respectively. Time-resolved electron paramagnetic resonance (TREPR) spectra indicate the existence of strongly spin exchanged 3 LE/3 CT states, with the effective zero field splitting (ZFS) |D| and |E| parameters of 1484 MHz and 109 MHz, respectively, much smaller than that of the native 3 NI state (2475 and 135 MHz). It is rare but solid experimental evidence that a closely-lying 3 LE state is crucial for occurrence of TADF and this 3 LE state is an essential intermediate state to facilitate reverse intersystem crossing in TADF systems.

Visible-Light-Induced α-C(sp3)-H Phosphinylation of Unactivated Ethers under Photocatalyst- and Additive-Free Conditions.

A photocatalyst- and additive-free visible-light-induced α-C(sp3)-H phosphinylation of unactivated ethers involving a C-O bond cleavage with molecular oxygen as the sole oxidant at room temperature has been achieved. This method provides a sustainable access to α-hydroxyphosphine oxides in up to 88% yield with good functional group compatibility under mild and neutral conditions (34 examples). Moreover, the subsequent two-step conversion of the resulting dihydroxy diarylphosphine oxides afforded α-phosphinylated cyclic ethers in good overall yields (10 examples).

Modulating the intersystem crossing mechanism of anthracene carboxyimide-based photosensitizers via structural adjustments and application as a potent photodynamic therapeutic reagent.

Herein, a series of compact anthracene carboxyimide (ACI) based donor-acceptor dyads were prepared by substituting bulky aryl moieties with various electron-donating ability to study the triplet-excited state properties. The ISC mechanism and triplet yield of the dyads were successfully tuned via structural manipulation. Efficient ISC (ΦΔ ≈ 99%) and long-lived triplet state (τT ≈ 122 µs) was observed for the orthogonal anthracene-labeled ACI derivative compared to the Ph-ACI and NP-ACI dyads, which showed fast triplet state decay (τT ≈ 7.7 µs). Femtosecond transient absorption study demonstrated the ultrafast charge separation (CS) and efficient charge recombination (CR) in the orthogonal dyads and ISC occurring via spin-orbit charge transfer (SOCT) mechanism (AN-ACI: τCS = 355 fs, τCR = 2.41 ns; PY-ACI: τCS = 321 fs, τCR = 1.61 ns), while in Ph-ACI and NP-ACI dyads triplet populate following the normal ISC channel (nπ* → ππ* transition), no CS was observed. We found that the attachment of suitable aryl donor moiety (AN- or PY-) to the ACI core can ensure the insertion of the intermediate triplet state, resulting in a small energy gap among charge separated state (CSS) and triplet state, which leads to efficient ISC in these derivatives. The SOCT-ISC-based AN-ACI dyad was confirmed to be a potent photodynamic therapeutic reagent; an ultra-low IC50 value (0.27 nM) that was nearly 214 times lower than that of the commercial Rose Bengal photosensitizer (57.8 nM) was observed.

Single-Cell Quantification of a Highly Biocompatible Dinuclear Iridium(III) Complex for Photocatalytic Cancer Therapy.

Quantifying the content of metal-based anticancer drugs within single cancer cells remains a challenge. Here, we used single-cell inductively coupled plasma mass spectrometry to study the uptake and retention of mononuclear (Ir1) and dinuclear (Ir2) IrIII photoredox catalysts. This method allowed rapid and precise quantification of the drug in individual cancer cells. Importantly, Ir2 showed a significant synergism but not an additive effect for NAD(P)H photocatalytic oxidation. The lysosome-targeting Ir2 showed low dark toxicity in vitro and in vivo. Ir2 exhibited high photocatalytic therapeutic efficiency at 525 nm with an excellent photo-index in vitro and in tumor-bearing mice model. Interestingly, the photocatalytic anticancer profile of the dinuclear Ir2 was much better than the mononuclear Ir1, indicating for the first time that dinuclear metal-based photocatalysts can be applied for photocatalytic anticancer treatment.

Cathodes for Aqueous Zn-Ion Batteries: Materials, Mechanisms, and Kinetics.

As concerns about the safety of lithium-ions batteries (LIBs) increases, aqueous zinc-ion batteries (ZIBs) with a lower cost, higher safety, and higher co-efficiency have attracted more and more interest. However, finding suitable cathode materials is still an urgent problem in ZIBs. In recent years, a lot of significant works have been reported, including manganese-based cathodes, vanadium-based cathodes, Prussian blue analog-based materials, and sustainable quinone cathodes. In this review, some typical cathode materials are introduced. The detailed storage mechanisms and methods for improving the reaction kinetics of the zinc ions are summarized. Finally, the issues, challenges, and the research directions are provided.

B,N Codoped Graphitic Nanotubes Loaded with Co Nanoparticles as Superior Sulfur Host for Advanced Li-S Batteries.

Lithium-sulfur batteries (LSBs) are considered as one of the best candidates for novel rechargeable batteries due to their high energy densities and abundant required materials. However, the poor conductivity and large volume expansion of sulfur and the "shuttle effect" of lithium polysulfides (LPSs) have significantly hindered the development and successful commercialization of LSBs. Bean-like B,N codoped carbon nanotubes loaded with Co nanoparticles (Co@BNTs), which can act as advanced sulfur hosts for the novel LSB cathode, are fabricated. Uniform graphitic nanotubes improve the conductivity of the electrode and load more electroactive sulfur and buffer volume expansion during the electrochemical reaction. In addition, loaded Co nanoparticles and codoped B,N sites can significantly suppress the "shuttle effect" of LPSs with strong chemical interaction. It is established that the Co nanoparticles and codoped B,N can provide more active sites to catalyze the redox reaction of sulfur cathode. This stable Co@BNTs-S cathode displays an exceptional electrochemical performance (1160 mA h g-1 after 200 cycles at 0.1 C) and outstanding stable cycle performance (1008 mA h g-1 after 400 cycles at 1.0 C with an extremely low attenuation rate of 0.038% per cycle).

Recent Progress of P2-Type Layered Transition-Metal Oxide Cathodes for Sodium-Ion Batteries.

Sodium-ion batteries (SIBs) have attracted much attention due to their abundance, easy accessibility, and low cost. All of these advantages make them potential candidates for large-scale energy storage. The P2-type layered transition-metal oxides (Nax TMO2 ; TM=Mn, Co, Ni, Ti, Fe, V, Cr, and a mixture of multiple elements) exhibit good Na+ ion conductivity and structural stability, which make them an excellent choice for the cathode materials of SIBs. Herein, the structural evolution, anionic redox reaction, some challenges, and recent progress of Nax TMO2 cathodes for SIBs are reviewed and summarized. Moreover, a detailed understanding of the relationship of chemical components, structures, phase compositions, and electrochemical performance is presented. This Review aims to provide a reference for the development of P2-type layered transition-metal oxide cathode materials for SIBs.