RESUMO
Electrical contacts often dominate charge transport properties at the nanoscale because of considerable differences in nanoelectronic device interfaces arising from unique geometric and electrostatic features. Transistors with a tunable Schottky barrier between the metal and semiconductor interface might simplify circuit design. Here, germanium nanowire (Ge NW) transistors with Cu3 Ge as source/drain contacts formed by both buffered oxide etching treatments and rapid thermal annealing are reported. The transistors based on this Cu3 Ge/Ge/Cu3 Ge heterostructure show ambipolar transistor behavior with a large on/off current ratio of more than 105 and 103 for the hole and electron regimes at room temperature, respectively. Investigations of temperature-dependent transport properties and low-frequency current fluctuations reveal that the tunable effective Schottky barriers of the Ge NW transistors accounted for the ambipolar behaviors. It is further shown that this ambipolarity can be used to realize binary-signal and data-storage functions, which greatly simplify circuit design compared with conventional technologies.
RESUMO
DNA is a nanowire in nature which chelates Ni ions and forms a conducting chain in its base-pairs (Ni-DNA). Each Ni ion in Ni-DNA exhibits low (Ni(2+)) or high (Ni(3+)) oxidation state and can be switched sequentially by applying bias voltage with different polarities and writing times. The ratio of low and high oxidation states of Ni ions in Ni-DNA represents a programmable multistate memory system with an added capacitive component, in which multistate information can be written, read, and erased. This study also indicates that the biomolecule-based self-organized nanostructure can be used as a template for nanodevice fabrication.
Assuntos
DNA/química , Eletrodos , Nanopartículas Metálicas/química , Nanofios/química , Níquel/química , DNA/ultraestrutura , Condutividade Elétrica , Impedância Elétrica , Íons , Nanopartículas Metálicas/ultraestrutura , Nanofios/ultraestrutura , Oxirredução , Oxigênio/químicaRESUMO
Octahedral PbSe colloidal nanocrystals (NCs) are used to assemble a solid. Because of the special feature of the apexes of the octahedrons, the cross-sectional area of the inter-dot tunneling junctions is much smaller than that formed between spherical NCs. The inter-dot separation between NCs is easily adjusted by mild thermal treatment. Like a spherical NC-solid, the resistance of the octahedral NC-solid is exponentially dependent on the inter-dot separation. On the contrary, due to the difference in the cross-sectional area between the NCs, electron transport in the octahedral NC-solid does not follow the same model used for the explanation of electron transport in a spherical NC-solid. Through analyses of current-voltage and resistance-temperature behaviors, we have confirmed that the model of fluctuation-induced tunneling conduction fits very well with all of the data and explains the variation in the electrical properties of octahedral PbSe colloidal NC-solids after thermal annealing.
RESUMO
DEP is one of promising techniques for positioning nanomaterials into the desirable location for nanoelectronic applications. In contrast, the lithography technique is commonly used to make ultra-thin conducting wires and narrow gaps but, due to the limit of patterning resolution, it is not feasible to make electrical contacts on ultra-small nanomaterials for a bottom-up device fabrication. Thus, integrating the lithography and dielectrophoresis, a real bottom-up fabrication can be achieved. In this work, the device with the nanogap in between two nanofinger-electrodes is made using electron-beam lithography from top down and the ultra-small nanomaterials, such as colloidal PbSe quantum dots, polyaniline nanofibers, and reduced-graphene-oxide flakes, are placed in the nanogap by DEP from bottom up. The threshold electric field for the DEP placement of PbSe nanocrystals was roughly estimated to be about 8.3 × 10(4) V/cm under our experimental configuration. After the DEP process, several procedures for reducing contact resistances are attempted and measurements of intrinsic electron transport in versatile nanomaterials are performed. It is experimentally confirmed that electron transport in both PbSe nanocrystal arrays and polyaniline nanofibers agrees well with Prof. Ping Sheng's model of granular metallic conduction. In addition, electron transport in reduced-graphene-oxide flakes follows Mott's 2D variable-range-hopping model. This study illustrates an integration of the electron-beam lithography and the DEP techniques for a precise manipulation of nanomaterials into electronic circuits for characterization of intrinsic properties.
Assuntos
Eletroforese/métodos , Nanoestruturas/química , Compostos de Anilina/química , Grafite/química , Chumbo/química , Nanofibras/química , Pontos Quânticos , Compostos de Selênio/químicaRESUMO
The low energy density and low cost performance of electrochemical capacitors (ECs) are the principal factors that limit the wide applications of ECs. In this work, we used enzymatic hydrolysis lignin as the carbon source and an ammonia activation methodology to prepare nitrogen-doped lignin-derived porous carbon (NLPC) electrode materials with high specific surface areas. We elucidated the free radical mechanism of ammonia activation and the relationship between nitrogen doping configurations, doping levels, and preparation temperatures. Furthermore, we assembled NLPCâ¥NLPC symmetric ECs and NLPCâ¥Zn asymmetric ECs using aqueous sulfate electrolytes. Compared with the ECs using KOH aqueous electrolyte, the energy densities of NLPCâ¥NLPC and NLPCâ¥Zn ECs were significantly improved. The divergence of charge storage characteristics in KOH, Na2SO4, and ZnSO4 electrolytes were compared by analyzing their area surface capacitance. This work provides a strategy for the sustainable preparation of lignin-derived porous carbons toward ECs with high energy densities.
Assuntos
Amônia/química , Carbono/química , Capacitância Elétrica , Lignina/química , Eletrodos , Hidróxidos/química , Nitrogênio/química , Porosidade , Compostos de Potássio/química , Sulfatos/química , Sulfato de Zinco/químicaRESUMO
Porous carbon materials are widely used in capacitive energy storage devices because of their chemical stability, low cost, and controllable textures. Molten salt self-template methods are powerful and sustainable synthesis strategies for preparing porous carbons with tunable pore textures and surface chemistries. Herein, we propose a self-template synthesis strategy for preparing oxygen-rich porous carbons (ORC) by directly carbonizing potassium chloroacetate (ClCH2COOK) as the single carbon source. The potassium chloride salts generated in the carbonization play the roles of the template and etchant agent in the pore formation process. The as-prepared ORC samples feature abundant mesopores (average pore sizes of 1.95-2.19 nm and mesopore ratio of 36.4%), high specific surface areas (1410-1886 m2 g-1), and high oxygen doping levels (4.3-8.2 atom %). The zinc ion hybrid capacitors with an ORC cathode exhibited an ultrahigh capacitance of 308 F g-1 at 0.5 A g-1 and a high energy density of 136.5 Wh kg-1 at a power density of 570 W kg-1. Density functional theory demonstrates that oxygen-containing functional groups are conducive to the adsorption of Zn ions. Our work proposes a general synthesis methodology for the synthesis of oxygen-rich porous carbons for a variety of electrochemical energy storage devices.
RESUMO
The aqueous zinc-ion battery (AZIB) has been widely investigated in recent years because it has the advantages of being green, safe, and made from abundant raw materials. It is necessary to continue to study how to prepare cathode materials with excellent performance and high cycling stability for future commercialization. In this work, a strategy was proposed that uses sustainable sodium lignosulfonate as both carbon and sodium sources to obtain a sodium pre-intercalated vanadium oxide/carbon (VO/LSC) composite as the cathode of AZIB. The carbon matrix could improve the electronic conductivity of vanadium oxide, while the sodium lignosulfonate could provide sodium ions pre-intercalated into the layered vanadium oxide simultaneously. Through this strategy, vanadium-based cathode materials with high stability and excellent rate capability were obtained. The VO/LSC cathode delivered high capacities of 350 and 112.8â mAh g-1 at 0.1 and 4.0â A g-1 , respectively. Zinc sulfate and zinc trifluoromethyl sulfonate were selected as electrolytes, and the influence of electrolytes on the performance of VO/LSC was analyzed. The oxygen in the environment was used to oxidize the low-priced vanadium oxide to achieve a self-charging AZIB. This paper provides a valuable strategy for the design of vanadium-based cathode material for AZIB, which can broaden the research and application of AZIB.
RESUMO
Lignin, one of the renewable constituents in natural plant biomasses, holds great potential as a sustainable source of functional carbon materials. Tremendous research efforts have been made on lignin-derived carbon electrodes for rechargeable batteries. However, lignin is considered as one of the most promising carbon precursors for the development of high-performance, low-cost porous carbon electrode materials for supercapacitor applications. Yet, these efforts have not been reviewed in detail in the current literature. This review, therefore, offers a basis for the utilization of lignin as a pivotal precursor for the synthesis of porous carbons for use in supercapacitor electrode applications. Lignin chemistry, the synthesis process of lignin-derived porous carbons, and future directions for developing better porous carbon electrode materials from lignin are systematically reviewed. Technological hurdles and approaches that should be prioritized in future research are presented.
RESUMO
Organometallic two-dimensional (2D) nanosheets with tailorable components have recently fascinated the optoelectronic communities due to their solution-processable nature. However, the poor stability of organic molecules may hinder their practical application in photovoltaic devices. Instead of conventional organometallic 2D nanosheets with low weatherability, an air-stable π-conjugated 2D bis(dithiolene)iron(II) (FeBHT) coordination nanosheet (CONASH) is synthesized via bottom-up liquid/liquid interfacial polymerization using benzenehexathiol (BHT) and iron(II) ammonium sulfate [Fe(NH4)2(SO4)2] as precursors. The uncoordinated thiol groups in FeBHT are easily oxidized, but the Fe(NH4)2(SO4)2 dissociation rate is slow, which facilitates the protection of sulfur groups by iron(II) ions. The density functional theory calculates that the resultant FeBHT network gains the oxygen-repelling function for oxidation suppression. In air, the FeBHT CONASH exhibits self-powered photoresponses with short response times (<40 ms) and a spectral responsivity of 6.57 mA W-1, a specific detectivity of 3.13 × 1011 Jones and an external quantum efficiency of 2.23% under 365 nm illumination. Interestingly, the FeBHT self-powered photodetector reveals extremely high long-term air stability, maintaining over 94% of its initial photocurrent after aging for 60 days without encapsulation. These results open the prospect of using organometallic 2D materials in commercialized optoelectronic fields.
RESUMO
Since the successful fabrication of semiconductor nanowires, various techniques have been developed to contact these nanowires and to probe their intrinsic electrical properties. Although many novel quasi one-dimensional materials such as Pb(1 - x)Mn(x)Se nanoarrays were recently produced, their intrinsic electron transport properties have not been extensively studied so far. In this work, we demonstrate that an ordinary source-drain configuration of field-effect transistors or the two-probe measurement can be applied to the exploration of the intrinsic properties of nanowires. This two-probe measurement approach also works on highly resistive nanowires without an Ohmic contact issue. By using this method, electron transport behavior, resistivity, and carrier concentrations of ZnO, InP, GaP, and Pb(1 - x)Mn(x)Se semiconductor nanowires have been investigated. Due to the tiny cross-section and few conducting channels, a nanomaterial usually reveals an ultra high resistance. This technique demonstrates a two-probe characterization of nanostructures, paving the simplest way toward electrical characterizations of all high-resistance nanomaterials such as deoxyribonucleic acid (DNA), molecules and organics.
RESUMO
Two-dimensional (2D) vdW materials have been integrated into optoelectronic devices to achieve exceptional functionality. However, the integration of large-area 2D thin films into organic light-emitting devices (OLEDs) remains challenging because of the finite number of inorganic 2D materials and the high-temperature requirements of their deposition process. The construction of 2D organometallic materials holds immense potential because of their solution synthesis and unlimited structural and functional diversity. Here, we report a facile route using an oil-water interfacial coordination reaction between organic ligands and divalent metal ions to synthesize crystalline quasi-2D organometallic bis(dithiolato)nickel (NiDT) nanosheets with a centimeter scale and a tunable thickness. The NiDT nanosheets can be directly integrated into OLEDs for use as a hole buffer layer and a fluorescent mounting medium without the aid of a transfer process. Moreover, OLEDs with NiDT nanosheets show not only comparable efficiency to conventional OLEDs but also prolonged device lifetime by nearly 2 times. These results open up a new dimension to use quasi-2D organometallic nanosheets as functional layers in large-area organic devices.
RESUMO
Palladium diselenide (PdSe2), a peculiar noble metal dichalcogenide, has emerged as a new two-dimensional material with high predicted carrier mobility and a widely tunable band gap for device applications. The inherent in-plane anisotropy endowed by the pentagonal structure further renders PdSe2 promising for novel electronic, photonic, and thermoelectric applications. However, the direct synthesis of few-layer PdSe2 is still challenging and rarely reported. Here, we demonstrate that few-layer, single-crystal PdSe2 flakes can be synthesized at a relatively low growth temperature (300 °C) on sapphire substrates using low-pressure chemical vapor deposition (CVD). The well-defined rectangular domain shape and precisely determined layer number of the CVD-grown PdSe2 enable us to investigate their layer-dependent and in-plane anisotropic properties. The experimentally determined layer-dependent band gap shrinkage combined with first-principle calculations suggest that the interlayer interaction is weaker in few-layer PdSe2 in comparison with that in bulk crystals. Field-effect transistors based on the CVD-grown PdSe2 also show performances comparable to those based on exfoliated samples. The low-temperature synthesis method reported here provides a feasible approach to fabricate high-quality few-layer PdSe2 for device applications.
RESUMO
A facile, self-seeded, solution-liquid-solid growth of soluble InP and GaP nanowires with a very low amount of native point defects with respect to the carrier concentrations have been synthesized (see scheme) and characterized. They are potentially promising building blocks in optoelectronic applications.We demonstrate a facile method for self-seeded, solution-liquid-solid growth of soluble InP and GaP nanowires at a temperature of approximately 300 degrees C. Both types of nanowires are single crystals with very small diameters. The synthesized InP nanowires are almost defect-free, whereas the GaP nanowires have some microtwins. The effect of reaction temperatures and input ligand/III/V (III and V indicate elements of Group 13 and 15 respectively) ratios on wire formation is discussed, and two competitive chemical pathways involved in the nanowire formation are proposed. In addition, electrical properties of these III-V nanowires, generated from the solution-based approach, were investigated for the first time. The current-voltage (I-V) and room temperature resistance investigations indicate that both InP and GaP nanowires possess very low native point defects for carrier concentrations and they could be potentially promising building blocks in optoelectronic applications.
RESUMO
Point-of-care (POC) application for monitoring of breath ammonia (BA) in hemodialysis (HD) patients has emerged as a promising noninvasive health monitoring approach. In this context, many organic gas sensors have been reported for BA detection. However, one of the major challenges for its integration with affordable household POC application is to achieve stable performance for accuracy and high operational current at low voltage for low-cost read-out circuitry. Herein, we exploited the stability of the Donor-Acceptor polymer on the cylindrical nanopore structure to realize the sensors with a high sensitivity and stability. Then, we proposed a double active layer (DL) strategy that exploits an ultrathin layer of Poly(3-hexylthiophene-2,5-diyl) (P3HT) to serve as a work function buffer to enhance the operational current. The DL sensor exhibits a sustainable enhanced operational current of microampere level and a stable sensing response even with the presence of P3HT layer. This effect is carefully examined with different aspects, including vertical composition profile of DL configuration, lifetime testing on different sensing layer, morphological analysis, and the versatility of the DL strategy. Finally, we utilize the DL sensor to conduct a tracing of BA concentration in two HD patients before and after HD, and correlate it with the blood urea nitrogen (BUN) levels. A good correlation coefficient of 0.96 is achieved. Moreover, the feasibility of DL sensor integrated into a low-cost circuitry was also verified. The results demonstrate the potential of this DL strategy to be used to integrate organic sensor for affordable household POC devices.
Assuntos
Amônia/análise , Testes Respiratórios/métodos , Diálise Renal , Nitrogênio da Ureia Sanguínea , Humanos , Nanoporos , Testes Imediatos , Polímeros/química , Polivinil/química , Tiofenos/química , Compostos de Estanho/químicaRESUMO
Diameter controllable ZnO nanowires have been fabricated by thermal evaporation (vapor transport) with various sizes of gold nanoparticles as catalysts. Diluted magnetic semiconductor (DMS) Zn(1-x)Co(x)O nanowires were then made by high energy Co ion implantation. The as-implanted and the argon-annealed Zn(1-x)Co(x)O nanowires displayed weak ferromagnetism while the high-vacuum annealed nanowires exhibited strong ferromagnetic ordering at room temperature. Size dependent behavior has been observed in the magnetic field and temperature dependences of magnetization. The shrinkage of the nanowire diameter reduced the spontaneous magnetization as well as the hysteresis loops. Field cooled and zero-field cooled magnetization and coercivity measurements were performed between 2 and 300 K to study the evolution of magnetism from the weak to the strong ferromagnetic states. In particular, superparamagnetic features were observed and shown to be intrinsic characteristics of the DMS Zn(1-x)Co(x)O nanowires. The room-temperature spontaneous magnetization of individual Zn(1-x)Co(x)O nanowires was also established by using magnetic force microscope measurements.
RESUMO
Precisely controllable and reversible p/n-type electronic doping of molybdenum ditelluride (MoTe2 ) transistors is achieved by electrothermal doping (E-doping) processes. E-doping includes electrothermal annealing induced by an electric field in a vacuum chamber, which results in electron (n-type) doping and exposure to air, which induces hole (p-type) doping. The doping arises from the interaction between oxygen molecules or water vapor and defects of tellurium at the MoTe2 surface, and allows the accurate manipulation of p/n-type electrical doping of MoTe2 transistors. Because no dopant or special gas is used in the E-doping processes of MoTe2 , E-doping is a simple and efficient method. Moreover, through exact manipulation of p/n-type doping of MoTe2 transistors, quasi-complementary metal oxide semiconductor adaptive logic circuits, such as an inverter, not or gate, and not and gate, are successfully fabricated. The simple method, E-doping, adopted in obtaining p/n-type doping of MoTe2 transistors undoubtedly has provided an approach to create the electronic devices with desired performance.
RESUMO
Tunability and stability in the electrical properties of 2D semiconductors pave the way for their practical applications in logic devices. A robust layered indium selenide (InSe) field-effect transistor (FET) with superior controlled stability is demonstrated by depositing an indium (In) doping layer. The optimized InSe FETs deliver an unprecedented high electron mobility up to 3700 cm2 V-1 s-1 at room temperature, which can be retained with 60% after 1 month. Further insight into the evolution of the position of the Fermi level and the microscopic device structure with different In thicknesses demonstrates an enhanced electron-doping behavior at the In/InSe interface. Furthermore, the contact resistance is also improved through the In insertion between InSe and Au electrodes, which coincides with the analysis of the low-frequency noise. The carrier fluctuation is attributed to the dominance of the phonon scattering events, which agrees with the observation of the temperature-dependent mobility. Finally, the flexible functionalities of the logic-circuit applications, for instance, inverter and not-and (NAND)/not-or (NOR) gates, are determined with these surface-doping InSe FETs, which establish a paradigm for 2D-based materials to overcome the bottleneck in the development of electronic devices.
RESUMO
Photovoltaic effects in poly(3-hexylthiophene-2,5-diyl) (P3HT) have attracted much attention recently. Here, natively p-type doped P3HT nanofibers and n-type doped zinc tin oxide (ZTO) nanowires are used for making not only field-effect transistors (FETs) but also p-n nanoscale diodes. The hybrid P3HT/ZTO p-n heterojunction shows applications in many directions, and it also facilitates the investigation of photoelectrons and photovoltaic effects on the nanoscale. As for applications, the heterojunction device shows a simultaneously high on/off ratio of n- and p-type FETs, gatable p-n junction diodes, tristate buffer devices, gatable photodetectors, and gatable solar cells. On the other hand, P3HT nanofibers are taken as a photoactive layer and the role played by the p-n heterojunction in the photoelectric and photovoltaic effects is investigated. It is found that the hybrid P3HT/ZTO p-n heterojunction assists in increasing photocurrents and enhancing photovoltaic effects. Through the controllable gating of the heterojunction, we can discuss the background mechanisms of photocurrent generation and photovoltaic energy harvesting.
RESUMO
We present theoretical and experimental investigations of the magnetism of paramagnetic semiconductor CdSe:Mn nanocrystals and propose an efficient approach to the exposure and analysis of the underlying anti-ferromagnetic interactions between magnetic ions therein. A key advance made here is the development of an analysis method with the exploitation of group theory technique that allows us to distinguish the anti-ferromagnetic interactions between aggregative Mn(2+) ions from the overall pronounced paramagnetism of magnetic-ion-doped semiconductor nanocrystals. By using the method, we clearly reveal and identify the signatures of anti-ferromagnetism from the measured temperature-dependent magnetisms and furthermore determine the average number of Mn(2+) ions and the fraction of aggregative ones in the measured CdSe:Mn nanocrystals.
RESUMO
To fabricate reliable nanoelectronics, whether by top-down or bottom-up processes, it is necessary to study the electrical properties of nanocontacts. The effect of nanocontact disorder on device properties has been discussed but not quantitatively studied. Here, by carefully analyzing the temperature dependence of device electrical characteristics and by inspecting them with a microscope, we investigated the Schottky contact and Mott's variable-range-hopping resistances connected in parallel in the nanocontact. To interpret these parallel resistances, we proposed a model of Ti/TiOx in the interface between the metal electrodes and nanowires. The hopping resistance as well as the nanocontact disorder dominated the total device resistance for high-resistance devices, especially at low temperatures. Furthermore, we introduced nanocontact disorder to modulate the light and gas responsivities of the device; unexpectedly, it multiplied the sensitivities compared with the intrinsic sensitivity of the nanowires. Our results improve the collective understanding of electrical contacts to low-dimensional semiconductor devices and will aid performance optimization in future nanoelectronics.