RESUMO
We successfully prepared a surfactant-assisted carbon nanotube (CNT) liquid crystal (LC) dispersion with double-walled CNTs (DWCNTs) having a high aspect ratio (≈1378). Compared to dispersions of single-walled CNTs (SWCNTs) with lower aspect ratio, the transition concentrations from isotropic phase to biphasic state, and from biphasic state to nematic phase are lowered, which is consistent with the predictions of the Onsager theory. An aligned DWCNT film was prepared from the DWCNT dispersion by a simple bar-coating method. Regardless of the higher aspect ratio, the order parameter obtained from the film is comparable to that from SWCNTs with lower aspect ratios. This finding implies that precise control of the film formation process, including a proper selection of substrate and deposition/drying steps, is crucial to maximize the CNT-LC utilization.
RESUMO
Chiroptical materials have received much attention in diverse fields for applications such as displays, sensors, smart memory devices, and catalysis. Here, we develop a simple fabrication method for polymer films with tunable chiroptical properties using small amounts of self-assembling fluorescent dye as an additive. Both the circular dichroism and circularly polarized luminescence signals of the film can be tuned between positive and negative values by thermal treatment. The chiroptical properties can be varied by slight changes in the orientation of chiral pyrene moieties in self-assembled nanofibril networks.
RESUMO
Stimuli-responsive materials can convert between molecular scale and macroscopic scale phenomena. Two macroscopic static electricity-responsive phenomena based on nanoscale supramolecular assemblies of a zinc porphyrin derivative are presented. One example involves the movement of supramolecular assemblies in response to static electricity. The assembly of a pyridine (Py) complex of the above-mentioned derivative in cyclohexane is drawn to a positively charged material, whereas the assembly of a 3,5-dimethylpyridine complex is drawn to a negatively charged material. The second phenomenon involves the movement of a non-polar solvent in response to static electrical stimulation. A cyclohexane solution containing a small quantity of the Py-complexed assembly exhibited a strong movement response towards negatively charged materials. Based on spectroscopic measurements and electron microscope observations, it was revealed that the assembled formation generates the observed response to static electricity.
RESUMO
Photosensitizers (PS) are used in photodynamic therapy to treat several cancers. The efficacy of photodynamic therapy (PDT) could be further improved by overcoming aggregation-dependent quenching of PS and by improving the biodistribution of the PS. In this work we attempted to overcome these issues by conjugating a PS with a lipid molecule and tested the liposomes prepared with this PS conjugated lipid for PDT. A novel lipid-porphyrin conjugate (1 : 1) was synthesized by attaching a PS, 5-(4-methoxycarbonylphenyl)-10,15,20-triphenyl-21H,23H-porphine, to the head group of a glutamide lipid. Two liposomal preparations, with egg phosphatidylcholine as the bulk lipid, were prepared viz. liposomes with PS conjugated lipid (LPSL) and PS entrapped in liposomes (PSL). At equimolar concentrations of the PS, both liposomal preparations were found to generate comparable amounts of reactive oxygen species as free PS upon light exposure. Electron micrographs and dynamic light scattering measurements indicated uniform and circular liposomes of 150 nm in size and near neutral zeta potential. Uptake of these liposomes by the human ovarian carcinoma cell line, SK-OV-3, was shown by FACS and confocal microscopy. Upon light exposure, the LPSL, i.e., with the conjugate lipid, have shown a substantial decrease (>4 times) in the PS requirement compared to PSL or free PS in its ability to cause light mediated cell death of SK-OV-3 cells. The light mediate cell death by LPSL was shown to be not dependent on the bulk properties of the lipid. Our data suggest a potential benefit of conjugating PS with a lipid in improving the efficiency of PDT.
Assuntos
Fotoquimioterapia , Fármacos Fotossensibilizantes/química , Morte Celular/efeitos dos fármacos , Morte Celular/efeitos da radiação , Linhagem Celular Tumoral , Humanos , Luz , Lipídeos/química , Lipossomos/química , Fármacos Fotossensibilizantes/metabolismo , Fármacos Fotossensibilizantes/farmacologia , Distribuição TecidualRESUMO
Dispersion represents a central processing method in the organization of nanomaterials; however, the strong interparticle interaction represents a significant obstacle to fabricating homogeneous and stable dispersions. While dispersants can greatly assist in overcoming this obstacle, the appropriate type is dependent on such factors as nanomaterial, solvent, experimental conditions, etc., and there is no general guide to assist in the selection from the vast number of possibilities. We report a strategy and successful demonstration of the machine-learning-based "Dispersant Explorer", which surveys and identifies suitable dispersants from open databases. Through the combined use of experimental and molecular descriptors derived from SMILES databases, the model showed exceptional predictive accuracy in surveying about â¼1000 chemical compounds and identifying those that could be applied as dispersants. Furthermore, fabrication of transparent conducting films using the predicted and previously unknown dispersant exhibited the highest sheet resistance and transmittance compared with those of other reported undoped films. This result highlights that, in addition to opening new avenues for novel dispersant discovery, machine learning has a potential to elucidate the chemical structures essential for optimal dispersion performance to assist in the advancement of the complex topic of nanomaterial processing.
RESUMO
Synthetic trade-offs exist in the synthesis of single-walled carbon nanotube (SWCNT) forests, as growing certain desired properties can often come at the expense of other desirable characteristics such as the case of crystallinity and growth efficiency. Simultaneously achieving mutually exclusive properties in the growth of SWCNT forests is a significant accomplishment, as it requires overcoming these trade-offs and balancing competing mechanisms. To address this, we trained a machine-learning regression model with a set of 585 "real" experimental synthesis data, which were taken using an automatic synthesis reactor. Subsequently, 16000 exploratory "virtual" experiments were performed by our trained model to examine potential routes toward addressing the current crystallinity-height trade-off limitation, and suggestions on growth conditions were predicted. Importantly, additional validation using "real" experimental syntheses showed good agreement with the predictions as well as a 48% increase in growth efficiency while maintaining the high crystallinity (G/D-ratio). This highlighted the effectiveness and accuracy of the predictive capability of our machine-learning model, which achieved improved results in less than 50 validation tests. Furthermore, the trained model revealed the surprising importance of the nature of the carbon feedstock, particularly the reactivity and concentration, as a route for overcoming the trade-off between the SWCNT crystallinity and growth efficiency. These results of the high-efficiency synthesis of highly crystalline SWCNT forests represent a significant advance in overcoming synthetic trade-off barriers for complex multivariable systems.
RESUMO
A new approach for fabricating donor-acceptor assembled systems is demonstrated, based on J-type ordered aggregation of a low-molecular zinc porphyrin derivative and subsequent integration of a pyridylated fullerene derivative with coordination and orientation onto the porphyrin aggregates. This system achieves unusually high efficiencies in fluorescence quenching during one-to-one mixing of the donor and acceptor. Moreover, the Stern-Volmer constant (K(SV)) and association constant (K) of this system are 2520 and 56 times higher, respectively, than those of the corresponding nonassembled system. The quenching efficiency is thermotropically switchable, since ordered-to-disordered transitions are essential characteristics of noncovalent low molecular assemblies.
Assuntos
Fulerenos/química , Porfirinas/química , Zinco/química , Eletroquímica , Transporte de Elétrons , Espectroscopia de Ressonância Magnética , Metaloporfirinas/química , Modelos Moleculares , Oxirredução , Sílica Gel/químicaRESUMO
Zinc porphyrin functionalized with double long-chain alkylated L-glutamide (GTPP-Zn) was synthesized for the first time, and its self-assembling behaviour was investigated in nonpolar organic solvents. The uniqueness of this functionalized porphyrin is characterized by its drastic colour change from dark green to purple via the formation of chirally stacked structures through selective axial coordination on zinc with pyridine derivatives. In this paper, we report the versatility of the GTPP-Zn assembly process as a stimuli-responsive chiroptical switching system and describe the remarkable ligand-specific induction of secondary chirality accompanied by aggregation morphological change.
Assuntos
Metaloporfirinas/química , Fenômenos Ópticos , Peptídeos/química , Alquilação , Dicroísmo Circular , Cor , Ligantes , Modelos Moleculares , Conformação Molecular , Piridinas/química , Solubilidade , Espectrofotometria Ultravioleta , Estereoisomerismo , Zinco/químicaRESUMO
An L-glutamide-functionalized tetraphenylporphyrin () has been newly synthesized and its self-assembling behavior in organic solvents is reported. forms nanofibrous assemblies in a dilute solution to show specific induced circular dichroism at the absorption band around the porphyrin moiety. It enables us to observe the meso-stable and stepwise H- and J-like hierarchical aggregations. Energy transfer studies in a mixed system with a pyrene-functionalized L-glutamide reveal the promotion of energy transfer from the pyrene excimer to the porphyrin moiety.
Assuntos
Transferência de Energia , Glutamina/análogos & derivados , Nanofios/química , Porfirinas/síntese química , Dicroísmo Circular , Glutamina/síntese química , Glutamina/química , Lipídeos/química , Estrutura Molecular , Nanofios/ultraestrutura , Transição de Fase , Porfirinas/química , Pirenos/química , Solubilidade , Espectrometria de Fluorescência , EspectrofotometriaRESUMO
A simple fabrication method for patterned carbon nanotube (CNT) films is presented, using the concept of light-induced dispersibility switching with a photoresponsive dispersant. A comparison with other dispersants highlights the important role played by an azobenzene-derived cationic molecule as a photoisomerizable dispersant in the successful manufacture of patterned CNT films. Upon UV irradiation for a short time (â¼0.5 min), a dispersion composed of CNTs and photoresponsive dispersant exhibited a dispersibility change due to the photoisomerization of the photoresponsive dispersant, and then the dispersant detached-CNT deposited onto the substrate. Our method enables patterned CNT films to be obtained directly from CNT dispersions onto various substrates such as glass, polyethylene terephthalate, and silicone rubber, expanding the possible applications of CNT films. Furthermore, the process minimizes the amount of the residual dispersant in the fabricated CNT film, reducing the amount of impurities, and improving the quality of the patterned CNT film.
RESUMO
We propose a new approach for a totally organic, room-temperature phosphorescent system with a lifetime on the order of milliseconds, which is achieved by promotion of the one-dimensional chiral stacking of a simple, small fluorophore in a solution state. The versatility of this system is highlighted by its good applicability to the fabrication of a phosphorescent polymer film. This paper demonstrates the first example of a room-temperature phosphorescent polymer film prepared with our methodology.
RESUMO
We describe the application of photodetachable and recyclable dispersants for single-walled carbon nanotubes (SWNTs) in the fabrication of photopatterned SWNT thin films. Because adsorption and desorption of the dispersants on the SWNT surfaces affect not only their dispersibility in water but also their solubility, SWNT photopatterns were obtained on glass substrates in only three steps, i.e., casting the SWNT/dispersant solution, UV-light exposure of the casted SWNT/dispersant films through a photomask, and subsequent rinsing with neutral water. This patterning procedure is simple and scalable and will enable us to prepare microfabricated SWNT thin films.
RESUMO
A new method for facile fabrication of high refractive index materials that is based on simple blending of polymers and heteropoly acids is demonstrated. This hybridization is shown to dramatically increase the refractive index of the general polymer, while maintaining a high transparency.
RESUMO
Here, we present the first application of molecular gel-mediated power-conversion enhancement of solar cells, which is based on the excimer emission from a transparent and colourless polymer film that encapsulates a pyrene nano-fibrillar assembly.
RESUMO
Enantioselective recognition of amino acids was achieved by using a highly ordered chiral assembly of achiral porphyrin on a chiral molecular gel. Exceptionally high enantioselectivity was observed for histidine derivatives by monitoring the CD patterns and fluorescence quenching, K(SV) (l): 26.3 × 10(3) M(-1); K(SV)(D)-enantiomer: 7.03 × 10(3) M(-1).
Assuntos
Géis/química , Porfirinas/química , Dicroísmo Circular , Espectrofotometria Ultravioleta , Estereoisomerismo , Zinco/químicaRESUMO
We propose a new strategy for fabrication of a phase-separated bicontinuous system composed of low-molecular donor and acceptor that is built up through coordination-based orientation of pyridylated fullerene on a π-conjugated zinc-porphyrin J-type assembly. This complex system exhibits extremely efficient and switchable fluorescence quenching.