Effect of a Novel Omega-3 and Omega-6 Fatty Acid Supplement on Dry Eye Disease: A 3-month Randomized Controlled Trial.

SIGNIFICANCE: Supplementing diet with a novel combination of omega-3 and omega-6 fatty acids significantly improved symptoms in extremely symptomatic participants with dry eye disease (DED). PURPOSE: This study aimed to determine the effect of daily intake of a novel combination of essential fatty acids on signs and symptoms of DED. METHODS: Participants with moderate to severe DED were enrolled in a prospective, randomized, double-masked parallel group study. Participants ingested either the treatment supplement containing omega-3 and omega-6 fatty acids (1200 mg eicosapentaenoic acid, 300 mg docosahexaenoic acid, 150 mg γ-linoleic acid) or the placebo (coconut and olive oil) daily for 3 months. To determine compliance, Omega-3 Index blood tests were conducted. At baseline and at 1 and 3 months, the following assessments were conducted: Ocular Surface Disease Index (OSDI) questionnaire and Symptom Assessment Questionnaire in Dry Eye, noninvasive tear breakup time, tear meniscus height, tear osmolarity, ocular redness, surface staining, Schirmer test, and meibography. RESULTS: Fifty participants (mean ± standard deviation baseline OSDI score, 52.2 ± 16.5) completed the study: 24 randomized to treatment and 26 randomized to placebo. Although there was an improvement in OSDI score at 3 months for both groups (treatment: -13.4 points, P = .003; placebo: -7.8 points, P = .02), participants with baseline OSDI scores >52 demonstrated an even larger significant improvement in symptoms with the treatment at 3 months compared with baseline (n = 13, -20.8 points, P = .002). There were no significant changes in any of the ocular assessments at 1 or 3 months (all P > .05). After 3 months, Omega-3 Index increased by 34% in the treatment group (baseline, 5.3 ± 0.8; 3 months, 8.0 ± 2.1; P < .001) and did not change in the placebo group (baseline, 4.8 ± 0.8; 3 months, 4.8 ± 0.6; P = .95). CONCLUSIONS: Supplementation with eicosapentaenoic acid, docosahexaenoic acid, and γ-linoleic acid resulted in a significant and clinically meaningful improvement of dry eye symptoms in extremely symptomatic participants with DED (OSDI ≥52).

Optimization of goblet cell density quantification methods.

The purpose of this study was to develop a standardized, accurate and efficient method for estimating conjunctival goblet cell density (GCD) via optimizing sample storage conditions and quantification methods. Conjunctival impression cytology (CIC) membranes were collected from both eyes of 32 participants and were randomized to two storage durations (2-3 weeks, 6-7 weeks) and two storage container types (microcentrifuge tube, flat histology cassette). The CIC membranes were stained and subdivided into 25 areas (5 mm × 5 mm) for imaging and the GCs were counted under 200X magnification using three different methods: (1) full CIC membrane GC count of the 25 images with cell-counting software ("full"; reference method), (2) partial membrane GC count of 9 images with cell-counting software ("partial"), and (3) manual counting of the 25 images ("manual"). In all cases, GCD was determined by dividing the GC count by the counting area. The average time required for quantification was recorded to gauge efficiency. Results showed no significant difference in GC count between the two storage durations (p = 0.745) or storage container types (p = 0.552). The median (interquartile range (IQR)) time required to quantify a CIC membrane for the full, partial, and manual methods of GC counting, was 14.8(17.6), 4.6(5.2) and 5.0 (5.0) minutes, respectively. The agreement of GCD values between the full and manual methods (bias: 0.4, 95% LOA: [-4.6, 5.5]) was stronger than that comparing the full and partial methods (bias: 0.5, 95% LOA: [-18, 17]). All together, through systematic examination of key procedural variables, an optimized method for GCD quantification within 7 weeks of sample collection was outlined. Adaption of procedures described in this paper to facilitate accurate and efficient GCD quantification may serve as a valuable step in clinical trials investigating DED pathophysiology and/or novel DED treatment strategies.

The Impact of Incubation Conditions on In Vitro Phosphatidylcholine Deposition on Contact Lens Materials.

SIGNIFICANCE: Previous in vitro measurements of contact lenses commonly investigate the impact of nonpolar tear film lipids (i.e., sterols). Polar lipids, however, are equally important stabilizing components of the tear film. This research explores and presents further knowledge about various aspects of polar lipid uptake that may impact contact lens performance. PURPOSE: This study evaluated the impact of incubation time, lipid concentration, and replenishment of an artificial tear solution (ATS) on the uptake of phosphatidylcholine (PC) onto conventional hydrogel (CH) and silicone hydrogel (SH) contact lens materials. METHODS: Four SHs and two CH lens materials (n = 4) were soaked in a complex ATS containing radioactive 14C-PC as a probe molecule. Phosphatidylcholine uptake was monitored at various incubation time points (1, 3, 7, 14, and 28 days), with different ATS lipid concentrations (0.5×, 1×, 2×) and with and without regular replenishment of the ATS. Phosphatidylcholine was extracted from the lenses, processed, and counted by a ß counter, and accumulated PC (µg/lens) was extrapolated from standard lipid calibration curves. RESULTS: All materials exhibited increasing PC deposition over time. Conventional hydrogel materials showed significantly lower PC uptake rates (P < .001) than any of the SH materials. Increasing lipid concentration in the ATS resulted in increased PC binding onto the contact lens materials (P < .001). Replenishing the ATS every other day, however, impacted the PC deposition differently, showing increased binding (P < .001) on CHs and reduced PC deposition for SH materials (P < .001). CONCLUSIONS: Length of incubation, lipid concentration in the ATS, and renewal of the incubation solution all influenced the amount of PC that sorbed onto various lens materials and therefore need to be considered when conducting future in vitro deposition studies.

Topical Review: Bibliometric Analysis of the Emerging Field of Myopia Management.

SIGNIFICANCE: Identification of the most impactful articles, authors, institutions, countries, and journals in myopia management provides a useful baseline reference for clinicians, researchers, and funding agencies in respect of this emerging field.This work aims to assemble publication metrics for myopia management to identify the most impactful articles, authors, institutions, countries, and journals in this emerging field of research. A search of the titles of articles was undertaken on the Scopus database to identify myopia management-related articles. The 25 most highly cited articles were determined from the total list of 1064 articles found. Rank-order lists by count were assembled for the top 25 in each of four categories: authors, institutions, countries, and journals. A subject-specific myopia management-related h-index (hMM-index) was derived for the entire field, in addition to each of the four categories, to serve as measures of impact in the field. Top 15 lists were generated for each category ranked by hMM-index and tabulated for consideration. An article by Christine Wildsoet and colleagues, describing choroidal and scleral mechanisms of compensation for spectacle lenses in chicks, has generated the most citations (412); Earl Smith is the most impactful author (hMM = 19); the University of Houston produces the most impactful articles (hMM = 31); the United States is the most highly ranked country (hMM = 60); and Optometry and Vision Science is the most impactful journal. Although still in its infancy, myopia management is a topic of emerging interest in the clinical and scientific ophthalmic literature. Impactful authors, institutions, countries, and journals are identified. Optometry is revealed as the leading profession in relation to the publication of myopia management-related articles.

Bulbar Redness and Dry Eye Disease: Comparison of a Validated Subjective Grading Scale and an Objective Automated Method.

SIGNIFICANCE: In this study, assessments of conjunctival redness were performed to evaluate whether patients with or without dry eye disease (DED) could be discriminated based on this measure. Our findings suggest that subjectively grading redness by quadrant, as opposed to automated en face measurements, may be more suitable for this purpose. PURPOSE: This study aimed to quantify bulbar redness using the validated bulbar redness (VBR) grading scale and an automated objective method (Oculus Keratograph 5M; K5M) in participants with DED and non-DED controls. METHODS: Participants with DED (Ocular Surface Disease Index score ≥20 and Oxford scale corneal staining ≥2) and controls (Ocular Surface Disease Index score ≤10 and corneal staining ≤1) attended two study visits. In part 1A of visit 1, baseline bulbar redness was graded with the VBR scale in each conjunctival quadrant of both eyes, followed by automated measurements of temporal and nasal redness with the K5M. This was immediately followed by part 1B, during which a topical vasoconstrictor was instilled into both eyes. Redness assessments were repeated 5 and 30 minutes after instillation with both instruments. Participants returned 14 days later for visit 2, where the same assessments as for visit 1A were repeated. RESULTS: Seventy-four participants (50 DED and 24 controls) completed the study. There were statistically significant differences in redness between the DED and control groups when assessed with the VBR scale (14/16 comparisons; all, P < .05), whereas no significant differences in K5M-derived redness between the DED and non-DED groups were found at any location or time point. Both subjective and objective instruments detected statistically significant reductions in redness 5 and 30 minutes after instillation of the vasoconstrictor (all, P < .01). CONCLUSIONS: Although both subjective and objective instruments were sensitive to detecting changes in redness induced by vasoconstriction, statistically significant differences in redness between DED and control groups were only found using the VBR scale.

Deposition of Fluorescently Tagged Lysozyme on Contact Lenses in a Physiological Blink Model.

PURPOSE: To visualize the deposition of fluorescein isothiocyanate (FITC) lysozyme on daily disposable contact lenses (CLs) using a novel blink model. METHODS: Three daily disposable conventional hydrogel CLs (etafilcon A, omafilcon A, and nelfilcon A) and three silicone hydrogel CLs (delefilcon A, senofilcon A, and somofilcon A) were evaluated in the study. The CLs were mounted onto a novel blink model and exposed to an artificial tear solution containing FITC lysozyme for 2 and 10 hr. The flow rate and blink speed were set to 1 µL/min and 6 blinks/min, respectively. After the incubation period, a 5-mm-diameter disc was punched out from the center of the lens and mounted on a microscope slide. The slides were imaged using the Zeiss 510 Meta confocal laser scanning microscope, which scanned the lens from the front to the back surface at 5-µm increments. RESULTS: There was an increase in deposition of FITC lysozyme for all lens types with increasing incubation time (P<0.05), with the exception of somofilcon A, which did not show statistical significance between 2 and 10 hr (P>0.05). The conventional hydrogel CLs deposited higher amounts of FITC lysozyme than the silicone hydrogel CLs (P<0.001), with etafilcon A depositing the highest at all time points (P<0.05). Interestingly, at the 2-hr incubation time, most CLs showed a higher amount of deposition at the front surface than the back surface of the lens. In particular, etafilcon A showed preferred deposition at the front surface at all time points. CONCLUSION: The results suggest that there is differential deposition at the front surface of the CL, which is exposed to the prelens tear film, compared with the back surface of the CL, which is exposed to the postlens tear film. Therefore, it may be beneficial to design CL materials with differing surface properties for the front and back surfaces of the CL to enhance interactions with the tear film and ocular surface.

Lysozyme Deposition on Contact Lenses in an In Vitro Blink-Simulation Eye Model Versus a Static Vial Deposition Model.

PURPOSE: To evaluate active lysozyme deposition on daily disposable (DD) contact lenses (CL) using a novel in vitro blink model. METHODS: Three conventional hydrogel DD CL materials (etafilcon A, omafilcon A, nelfilcon A) and three silicone hydrogel DD CL materials (delefilcon A, senofilcon A, somofilcon A) were tested. The device blink rate was set to 6 blinks/min with a tear flow rate of 1 µL/min using an artificial tear solution (ATS) containing lysozyme and other typical tear film components. After incubation at 2, 4, or 8 hr, lenses were removed, and lysozyme activity was measured. A separate experiment was conducted with lenses incubated in a static vial containing 480 µL of ATS. RESULTS: Etafilcon A deposited significantly higher amounts of active lysozyme (402±102 µg/lens) than other lens materials after 8 hr (P<0.0001). Etafilcon A had a higher amount of active lysozyme using the blink model compared with the static vial (P=0.0435), whereas somofilcon A (P=0.0076) and senofilcon A (P=0.0019) had a higher amount of lysozyme activity in the vial compared with the blink model. CONCLUSION: The blink model can be tuned to provide quantitative data that closely mimics ex vivo studies and can be used to model deposition of lysozyme on CL materials.

Uptake and Release of a Multipurpose Solution Biocide (MAP-D) From Hydrogel and Silicone Hydrogel Contact Lenses Using a Radiolabel Methodology.

PURPOSE: The purpose of this study was to evaluate the uptake and release of radiolabelled myristamidopropyl dimethylamine (MAP-D) on reusable daily wear contact lenses (CLs) over 7 days. METHODS: Three silicone hydrogel (SH) CL materials (lotrafilcon B, balafilcon A, senofilcon A) and two conventional hydrogel (CH) materials (etafilcon A, omafilcon A) were tested. A short-term (experiment 1, N=4) and a longer-term (experiment 2, N=3) study was conducted. In experiment 1, the CLs were incubated in 2 mL of phosphate buffered solution (PBS) containing 14C MAP-D (5 µg/mL) for 8 hrs. The release of 14C MAP-D was measured at t=0.25, 0.5, 1, 2, 4, 8, and 24 hr in PBS. In experiment 2, the CLs were incubated in the 14C MAP-D solution for 8 hrs followed by a 16-hr release in PBS. This cycle was repeated daily for 7 days. At the end of both experiments, lenses were extracted to determine the total uptake of MAP-D. The radioactivity was measured using a beta scintillation counter. RESULTS: In experiment 1, all three SH lenses sorbed similar amounts of MAP-D (P=0.99), all of which were higher than the two CH materials (P<0.01). However, the CH materials released a greater amount of MAP-D than the SH materials (P<0.01). In experiment 2, the uptake of MAP-D in SH materials increased over 7 days, whereas the amount of MAP-D remained constant in the CH materials (P=0.99). Similar to experiment 1, the CH lenses released more MAP-D than SH lenses after 7 days (P<0.01). CONCLUSION: The SH materials absorbed greater amounts of MAP-D compared to CH materials. However, the CH materials released the greatest amount of MAP-D. Radioactive labelling of MAP-D offers a highly sensitive method of assessing the uptake and release profiles of biocides to CL materials.

Frequency of Contact Lens Complications Between Contact Lens Wearers Using Multipurpose Solutions Versus Hydrogen Peroxide in the United States and Canada.

OBJECTIVES: To retrospectively compare frequency of contact lens (CL) complications in soft CL users of hydrogen peroxide (H2O2) and multipurpose solutions (MPS). METHODS: This was a multicenter, retrospective chart review of CL records from each patient's three most recent eye examinations at academic and private practices. Patients must have used the same solution type for at least 3 years. Univariate analyses were conducted using t tests, and chi-square or Fisher's exact test for categorical measures. RESULTS: There were 1,137 patients included, with 670 (59%) using MPS and 467 (41%) H2O2. In total, 706 (62%) experienced at least one complication; 409 used MPS and 297 used H2O2. There was no difference in the proportion of patients experiencing at least one complication between MPS (61%) and H2O2 (64%) (P=0.38). Multipurpose solutions users were more likely to report discomfort compared with H2O2 users (P=0.04). Presumed microbial keratitis was experienced by 16 MPS and nine H2O2 users (P=0.60). CONCLUSIONS: No significant differences were found in the frequency of CL complications between MPS and H2O2. H2O2 users were less likely to report discomfort and thus switching to a H2O2 system may be an alternative in CL users with discomfort.

The Differential Reactive Oxygen Species Production of Tear Neutrophils in Response to Various Stimuli In Vitro.

A large number of polymorphonuclear neutrophils (PMNs) invade the ocular surface during prolonged eye closure (sleep); these leukocytes are commonly referred as tear PMNs. PMNs contribute to homeostasis and possess an arsenal of inflammatory mediators to protect against pathogens and foreign materials. This study examined the ability of tear PMNs to generate reactive oxygen species (ROS), an essential killing mechanism for PMNs which can lead to oxidative stress and imbalance. Cells were collected after sleep from healthy participants using a gentle eye wash. ROS production in stimulated (phorbol-12-myristate-13-acetate (PMA), lipopolysaccharides (LPS) or N-Formylmethionyl-leucyl-phenylalanine (fMLP)) and unstimulated tear PMNs was measured using luminol-enhanced chemiluminescence for 60 min. A high level of constitutive/spontaneous ROS production was observed in tear PMNs in the absence of any stimulus. While tear PMNs were able to produce ROS in response to PMA, they failed to appropriately respond to LPS and fMLP, although fMLP-stimulated tear PMNs generated ROS extracellularly in the first three minutes. Higher ROS generation was observed in isolated tear PMNs which may be due to priming from the magnetic bead cell separation system. The differential responses of tear PMNs in ROS generation provide further evidence of their potential inflammatory roles in ocular complications involving oxidative stress.

Adhesion of Pseudomonas aeruginosa, Achromobacter xylosoxidans, Delftia acidovorans, Stenotrophomonas maltophilia to contact lenses under the influence of an artificial tear solution.

Corneal infection is a devastating sight-threatening complication that is associated with contact lens (CL) wear, commonly caused by Pseudomonas aeruginosa. Lately, Achromobacter xylosoxidans, Delftia acidovorans, and Stenotrophomonas maltophilia have been associated with corneal infection. This study investigated the adhesion of these emerging pathogens to CLs, under the influence of an artificial tear solution (ATS) containing a variety of components commonly found in human tears. Two different CL materials, etafilcon A and senofilcon A, either soaked in an ATS or phosphate buffered saline, were exposed to the bacteria. Bacterial adhesion was investigated using a radio-labeling technique (total counts) and plate count method (viable counts). The findings from this study revealed that in addition to P. aeruginosa, among the emerging pathogens evaluated, A. xylosoxidans showed an increased propensity for adherence to both CL materials and S. maltophilia showed lower viability. ATS influenced the viable counts more than the total counts on CLs.

Dry Eye Disease in University-based Clinics in Canada: A Retrospective Chart Review.

SIGNIFICANCE: Dry eye disease (DED) imposes a substantial burden on patients, which can lead to significant economic consequences for society. We provide insights into the DED patient population and DED diagnostic/management practices in Canada, which to date have been inadequately addressed in the literature. PURPOSE: The purpose of this study was to describe DED patient demographic/clinical characteristics alongside DED diagnosis/management in university-based optometry clinics in Canada. METHODS: This was a retrospective chart review of nonconcurrent non-Sjögren patients with DED at two university-based optometry clinics in Montreal and Waterloo. Waterloo charts with a diagnosis of DED and all charts from the Montreal dry eye clinic were considered for inclusion. RESULTS: Overall, 200 charts were reviewed. Most patients were female (Montreal, 76%; Waterloo, 72%), and the mean age was 57.2 ± 14.9 years at Montreal and 52.6 ± 20.1 years at Waterloo. Patients commonly reported multiple health conditions (e.g., allergies [Montreal, 44%; Waterloo, 36%]), and high use of systemic nonocular medications was observed (Montreal, 76%; Waterloo, 62%). Clinical signs and symptoms of DED were recorded more often in Montreal patients than in Waterloo patients (e.g., dryness symptoms, 100 vs. 72%; tear breakup time, 100 vs. 60%). Warm compresses (Montreal, 63%; Waterloo, 83%) and artificial tears (Montreal, 94%; Waterloo, 96%) were the most frequently recommended nonmedical treatment and ocular lubricant, respectively. Topical steroids were the most frequently prescribed medications (Montreal, 22%; Waterloo, 21%), with typically three to four different interventions recommended per patient at each clinic. No relationship was found between symptoms and clinical signs or recommended interventions. CONCLUSIONS: This retrospective chart review provided the demographics, clinical characteristics, diagnosis, and management options for DED patients in Canadian university-based optometry clinics. The more comprehensive assessments conducted at Montreal may be beneficial to better monitor the progression of DED and to determine treatment effects over time.

The Impact of Cosmetics on the Physical Dimension and Optical Performance of Contemporary Silicone Hydrogel Contact Lenses.

PURPOSE: Contact lens wearers may inadvertently expose their lenses during the lens insertion and removal process or while wearing their lenses to cosmetic products being used. This study investigated the impact of various cosmetics on the physical dimension and optical properties of three recently marketed monthly replacement silicone hydrogel contact lenses. METHODS: In this in vitro study, three monthly replacement silicone hydrogel lens types including senofilcon C (ACUVUE VITA, Johnson & Johnson), samfilcon A (Bausch+Lomb ULTRA, Bausch+Lomb), and lotrafilcon B+EOBO (polyoxyethylene-polyoxybutylene) (AIR OPTIX plus HydraGlyde, ALCON), were individually coated with cosmetic products followed by a 1-hr soak in phosphate-buffered saline. Cosmetic products included; three hand creams (HC1: Glysomed; HC2: Vaseline Healthy Hand & Nail Conditioning; and HC3: Intense Relieve), three make-up removers (MR1: Lid-Care Towelettes; MR2: Gentle waterproof eye and Lip Makeup Remover; and MR3: Oil-Free Makeup Remover), and three mascaras (MA1: Great Lash-waterproof; MA2a: Wonder'Lash-waterproof, and MA3: Voluminous Original). The contact lens dimensions were determined for diameter, sagittal depth, and base curve, using the Chiltern (Optimec Limited), whereas lens power and optical quality were assessed using the Contest Plus II (Rotlex). Six replicates for each lens/cosmetic combination were used. The impact of cosmetics was tested between lenses and compared with uncoated control lenses. RESULTS: For lens diameter, makeup removers (MR2 & MR3) demonstrated the largest impact, with an increase of up to 0.26 mm (MR2) and 0.35 mm (MR3) for senofilcon C and samfilcon A, respectively (P<0.01 compared to baseline), whereas lotrafilcon B+EOBO showed a decrease of 0.01 mm (P<0.01 between lens types). For sagittal depth, mascara MA1 demonstrated the greatest impact, followed by makeup removers MR2 & MR3. All lenses showed increases in sagittal depth after MA1 exposure (0.16±0.06 mm in lotrafilcon B+EOBO, 0.24±0.22, and 0.26±0.09 mm in samfilcon A and senofilcon C, respectively; P<0.01 for all lenses compared with baseline). For base curve, the makeup removers (MR2 & MR3) caused increases for both senofilcon C (up to 0.36 mm) and samfilcon A (up to 0.35 mm), but lotrafilcon B+EOBO was unaffected. Lens power changes were generally minor (<0.25 D). However, senofilcon C showed a significant change of -1.18±0.65 D (more minus) after MA1 exposure (P<0.001). Image quality was most affected by mascaras, although given that all lens types were adversely affected to similar degrees, none of the lenses performed better or worse after mascara application (P>0.05). The parameters of the different lens types were not significantly affected by the hand creams. CONCLUSION: Makeup removers and mascaras changed the lens parameters to varying degrees, which may affect the fit and overall performance of the lens, whereas no such effect was noted with hand creams. Lotrafilcon B+EOBO was typically less affected compared with senofilcon C or samfilcon A.

Impact of a Hyaluronic Acid-Grafted Layer on the Surface Properties of Model Silicone Hydrogel Contact Lenses.

The introduction of high oxygen transmissibility silicone hydrogel lenses ameliorated hypoxia-related complications, making them the most prescribed type of contact lens (CL). Despite the progress made over the last 2 decades to improve their clinical performance, symptoms of ocular dryness and discomfort and a variety of adverse clinical events are still reported. Consequently, the rate of CL wear discontinuation has not been appreciably diminished by their introduction. Aiming to improve the interfacial interactions of silicone hydrogel CLs with the ocular surface, a biomimetic layer of hydrophilic glycosaminoglycan hyaluronic acid (HA) (100 kDa) was covalently attached to the surface of model poly(2-hydroxyethyl methacrylate- co-3-methacryloxypropyl-tris-(trimethylsiloxy)silane) (pHEMA- co-TRIS) silicone hydrogel materials via UV-induced thiol-ene "click" chemistry. The surface structural changes after each modification step were studied by Fourier transform infrared spectroscopy-attenuated total reflectance and X-ray photoelectron spectroscopy (XPS). Successful grafting of a homogeneous HA layer to the surface of the model silicone hydrogels was confirmed by the consistent appearance of N (1s) and the significant decrease of the Si (2p) peaks, as determined by low-resolution angle-resolved XPS. The HA-grafted surfaces demonstrated reduced contact angles, dehydration rate, and nonspecific deposition of lysozyme and albumin, while maintaining their optical transparency (>90%). In vitro studies demonstrated that the HA-grafted pHEMA- co-TRIS materials did not show any toxicity to human corneal epithelial cells. These results suggest that surface immobilization of HA via thiol-ene "click" chemistry can be used as a promising surface treatment for silicone hydrogel CLs.

Uptake and Release of Polyvinyl Alcohol from Hydrogel Daily Disposable Contact Lenses.

SIGNIFICANCE: Polyvinyl alcohol is a wetting agent that could reduce the symptoms of dry eye and contact lens discomfort. Currently, only one lens type, nelfilcon A (DAILIES AquaComfort Plus), releases polyvinyl alcohol. The concept of releasing this agent from contact lenses could be applied to other lens materials. PURPOSE: The purpose of this study was to measure the release of polyvinyl alcohol from commercially available hydrogel daily disposable contact lenses using refractive index and iodine-borate methods. METHODS: Etafilcon A, omafilcon A, and nelfilcon A were soaked in phosphate-buffered saline and 0.2% trifluoroacetic acid/acetonitile for 24 hours to remove residual blister pack components. The lenses were then incubated in a 10-mg/mL solution of polyvinyl alcohol for 24 hours. After the incubation period, the lenses were placed in 2 mL of phosphate-buffered saline. At specified time intervals, t = 0.5, 1, 2, 4, 8, 12, and 24 hours, the samples were evaluated using refractive index and an iodine-borate assay. Polyvinyl alcohol uptake was determined by extracting the lenses with methanol for 24 hours. RESULTS: There were no differences in the uptake of polyvinyl alcohol between lens types (P > .05). The release of this wetting agent for all lens types followed a burst-plateau profile after the first 30 minutes (P > .05). Nelfilcon A had a slightly higher release of polyvinyl alcohol (P < .05) than did etafilcon A but was similar to omafilcon A (P > .05). CONCLUSIONS: The results suggest that the contact lenses tested in this study have similar efficiency in delivering polyvinyl alcohol.

Efficacy of Contact Lens Care Solutions in Removing Cholesterol Deposits From Silicone Hydrogel Contact Lenses.

PURPOSE: To determine the efficacy of multipurpose solutions (MPSs) on the removal of cholesterol deposits from silicone hydrogel (SH) contact lens materials using an in vitro model. MATERIALS AND METHODS: Five SH lens materials: senofilcon A, comfilcon A, balafilcon A, lotrafilcon A, and lotrafilcon B were removed from the blister pack (n=4 for each lens type), incubated for 7 days at 37°C in an artificial tear solution containing C radiolabeled cholesterol. Thereafter, lenses were stored in a preserved saline solution control (Sensitive Eyes Saline Plus) or cleaned with 1 of the 5 MPSs incorporating different preservatives (POLYQUAD/ALDOX, polyquaternium-1/alexidine, polyquaternium-1/PHMB, and 2 based on PHMB alone) using a rub and rinse technique, according to the manufacturer's recommendations, and stored in the MPS for a minimum of 6 hr. Lenses were then extracted with 2:1 chloroform:methanol, analyzed in a beta counter, and µg/lens of cholesterol was determined. RESULTS: Balafilcon A and senofilcon A lens materials showed the highest amounts of accumulated cholesterol (0.93±0.02 µg/lens; 0.95±0.01 µg/lens, respectively), whereas lotrafilcon A and lotrafilcon B deposited the lowest amounts (0.37±0.03 µg/lens; 0.47±0.12 µg/lens, respectively). For all lens materials, the MPS preserved with POLYQUAD/ALDOX removed more deposited cholesterol than any other test solution; however, the amount of removed cholesterol contamination from the individual contact lenses was only statistically significant for balafilcon A and senofilcon A (P=0.006 and P=0.042, respectively). Sensitive eyes and the other evaluated MPSs showed no significant effect on cholesterol removal (P>0.05). CONCLUSION: Cholesterol-removal efficacy varies depending on the combination of lens material and solution. Only 1 MPS showed a statistically significant reduction of cholesterol deposit for only 2 of the 5 tested lens materials.

The Case for Using Hydrogen Peroxide Contact Lens Care Solutions: A Review.

Despite their established disinfection and safety benefits, the use of hydrogen peroxide (H2O2) lens care systems among today's wearers of reusable contact lenses remains low in comparison with multipurpose solution (MPS) use. Multipurpose solution systems, however, present several potential drawbacks that may impact patient outcomes, including the use of chemical preservatives for disinfection, biocompatibility issues, and challenges with respect to lens care compliance. Given their unique composition and mechanism of action, one-step H2O2 systems offer the opportunity to avoid many of the challenges associated with MPS use. This article reviews the evolution of H2O2 lens care systems and examines the current scientific and clinical evidence regarding the relative ease of use, lens and tissue compatibility, disinfection efficacy, and ocular surface safety of H2O2 systems. Evaluation of the available data indicates that in comparison with MPS, one-step H2O2 systems tend to promote more favorable compliance, efficacy, comfort, and ocular surface outcomes for a wide range of contact lens-wearing patients. Based on the current published evidence, the authors recommend that eye care practitioners consider making one-step H2O2 systems their first-line contact lens care recommendation for most wearers of reusable lenses.

The Impact of Scleral Contact Lens Vault on Visual Acuity and Comfort.

PURPOSE: To assess how varying degrees of corneal clearance of scleral contact lenses (ScCL) impact visual acuity (VA) and comfort in patients with corneal ectasia. METHOD: Three ScCL were fitted to 20 subjects with previous diagnosis of either keratoconus (n=18) or pellucid marginal degeneration (n=2). Fitting of ScCL was based on corneal sagittal height (CSH) measured with Visante OCT at a 15-mm chord on the horizontal meridian. To select the ScCL from the diagnostic lens set, values of 325, 375, and 425 µm were randomly added in sequence to CSH. Subjects wore ScCL for 1 hr. Central corneal clearance (CCC) and topographic corneal clearance (TCC) along the vertical meridian were assessed using an ultralong optical coherence tomographer. High-contrast VA (HCVA) and low-contrast VA (LCVA) were measured using a logarithm of the minimum angle of resolution VA chart, and comfort ratings were obtained with a standard comfort scale (0-100). RESULTS: Mean CSH in the horizontal meridian was 3.78±0.53 (range: 3.33-4.17) mm at a 15-mm chord. Mean CCC was 190±100 µm (TCC: 160±94 µm at +3 mm and 180±94 µm at -3 mm), 360±120 µm (TCC: 260±100 µm at +3 mm and 330±110 µm at -3 mm), and 450±170 µm (TCC: 320±120 µm at +3 mm and 400±120 µm at -3 mm) for each lens (P=0.001). Mean HCVA for lenses 1, 2, and 3 were 0.05±0.12, 0.07±0.11, and 0.11±0.08 respectively, which were significantly different (P=0.02). Tukey post hoc analysis showed that this difference was only significant between lenses 1 and 3 (P=0.01). Similar findings were found for LCVA. Comfort ratings for lenses 1, 2, and 3 were 74.9±9.2, 79.7±11.6, and 78.6±10.8, respectively (P=0.24). CONCLUSION: The CSH is an effective method of determining the appropriate lens/cornea relationship. Lens 2 (+375 µm) gave the best combination of acuity and comfort ratings. Evaluation of the fluorescein pattern must be balanced with VA and comfort ratings for successful fitting in a clinical setting.

Short-Term Comfort Responses Associated With the Use of Eyelid Cleansing Products to Manage Demodex folliculorum.

PURPOSE: To quantify the discomfort over time of various eyelid cleansers against Demodex. METHODS: This was a prospective, randomized, controlled, crossover, open-label study that enrolled 26 participants. The cleansers used in this study were Biotissue Cliradex (CD), OCuSOFT Lid Scrubs Plus (OP), OCuSOFT OUST Demodex Swabstix (ODS), TheraTears Theralid (TT), NovaBay Avenova (NA). Bausch+Lomb Sensitive Eyes Plus saline was used as a control. Participants were asked to close their eyes as the product was gently rubbed (10 cycles of gentle lateral motion) into the eyelashes. Participants verbally rated their discomfort (0 = no discomfort, 10 = maximum tolerable discomfort) every 15 sec for the first 5 min, and every 30 sec for 5 min after, for a total of 10 min. The order of products used was randomized, and washout period between cleansing was 48 hr. RESULTS: Twenty-five participants completed the study (mean age=26±6). There was no significant difference in discomfort scores at pre-application. The discomfort levels of saline, OP, and NA over the 10-min period were not significantly different than their pre-application discomfort at all time points (all P≥0.99). The discomfort of CD was significantly higher than pre-application levels between t=15 sec and t=180 sec (all P≤0.01), with maximum median (interquartile range [IQR]) discomfort of 3.0 (5.0) occurring at t=45 sec. The discomfort of TT was significantly higher than pre-application levels between t=45 and t=90 (all P<0.02), with maximum median (IQR) discomfort of 1.0 (1.5) occurring at t=75 sec. The discomfort of ODS was significantly higher than pre-application levels starting from t=60 sec and onward, with maximum median (IQR) discomfort of 6.0 (5.0) occurring at t=300 sec. CONCLUSION: Of the cleansers used in this study, the ones that induced significant discomfort were CD, TT, and ODS. The results from this study may help clinicians educate patients about what to expect when approaching the topic of eyelid Demodex treatment.

A Comparison of Dry Eye Diagnostic Tests Between Symptomatic and Asymptomatic Age-Matched Females.

PURPOSE: To quantify the strength of association of dry eye (DE) symptoms to DE diagnostic tests in age-matched females. METHODS: Twenty females with DE symptoms (Ocular Surface Disease Index, OSDI, ≥13) were age-matched with 20 females without DE symptoms (OSDI<13) in this cross-sectional study. Noninvasive tear breakup time (NIBUT), ocular staining, meibum quality, number of obstructed meibomian glands (MGs), lid wiper epitheliopathy, Marx line placement, eyelid margin score, Schirmer test, meibography, and visual acuity were assessed in both groups. RESULTS: Twenty participant pairs completed the study. The age (median/interquartile range [IQR]) of the symptomatic group was 60/15 and the asymptomatic group was 62/15. The tests (median/IQR, P value) that were significantly different between the symptomatic group and the asymptomatic group were OSDI (35.4/35.4 vs. 3.1/6.7, P<0.01), NIBUT (2.1/0.7 sec vs. 3.0/3.0 sec, P=0.01), meibum quality (3.0/0.0 grade units vs. 2.0/1.0 grade units, P<0.01), number of obstructed MGs (7.0/2.0 glands vs. 5.0/4.8 glands, P<0.01), and ocular staining (5.5/3.8 grade units vs. 0.5/1.0 grade units, P<0.01). The tests (area under curve, [AUC], odds ratio [OR]) that were most strongly associated with DE symptoms were ocular staining (0.93, 5.0), number of obstructed MGs (0.79, 2.6), meibum quality (0.76, 2.4), and NIBUT (0.74, 3.2) (all P<0.05). There was no significant difference between the two groups for the other DE tests (all P>0.05), and similarly, no significant association to DE symptoms (all P>0.05). CONCLUSION: The diagnostic tests most strongly associated with DE symptoms in older women were ocular staining, meibum quality, number of obstructed MGs, and tear film stability.