Thyroid-Friendly Soft Materials as 3D Cell Culture Tool for Stimulating Thyroid Cell Function.

The disruption of thyroid hormones because of chemical exposure is a significant societal problem. Chemical evaluations of environmental and human health risks are conventionally based on animal experiments. However, owing to recent breakthroughs in biotechnology, the potential toxicity of chemicals can now be evaluated using 3D cell cultures. In this study, the interactive effects of thyroid-friendly soft (TS) microspheres on thyroid cell aggregates are elucidated and their potential as a reliable toxicity assessment tool is evaluated. Using state-of-the-art characterization methods coupled with cell-based analysis and quadrupole time-of-flight mass spectrometry, it is shown that TS-microsphere-integrated thyroid cell aggregates exhibit improved thyroid function. Specifically, the responses of zebrafish embryos, which are used for thyroid toxicity analysis, and the TS-microsphere-integrated cell aggregates to methimazole (MMI), a known thyroid inhibitor, are compared. The results show that the thyroid hormone disruption response of the TS-microsphere-integrated thyroid cell aggregates to MMI is more sensitive compared with those of the zebrafish embryos and conventionally formed cell aggregates. This proof-of-concept approach can be used to control cellular function in the desired direction and hence evaluate thyroid function. Thus, the proposed TS-microsphere-integrated cell aggregates may yield new fundamental insights for advancing in vitro cell-based research.

Integration of Bioinspired Fibrous Strands with 3D Spheroids for Environmental Hazard Monitoring.

Numerous methods have been introduced to produce 3D cell cultures that can reduce the need for animal experimentation. This study presents a unique 3D culture platform that features bioinspired strands of electrospun nanofibers (BSeNs) and aquatic cell lines to compensate for shortcomings in the current cell spheroid generation techniques. The use of BSeNs in 3D zebrafish liver cell cultures is found to improve liver and reproductive functions through spheroid-based in vitro assays such as whole transcriptome sequencing and reproductive toxicity testing, with optimized properties exhibiting results similar to those obtained for fish embryo acute toxicity (FET, OECD TG 236) following exposure to environmental endocrine-disrupting chemicals (17ß-Estradiol (E2), 4-hydroxytamoxifen (4-HT), and bisphenol compounds (bisphenol A (BPA) and 9,9-Bis(4-hydroxyphenyl)fluorene (BPFL)). These findings indicate that the beneficial effects of bioinspired materials that closely mimic ECM environments can yield efficient zebrafish cells with intrinsic functions and xenobiotic metabolism similar to those of zebrafish embryos. As a closer analog for the in vivo conditions that are associated with exposure to potentially hazardous chemicals, the straightforward culture model introduced in this study shows promise as an alternative tool that can be used to further eco-environmental assessment.

In Situ Magnetic Control of Macroscale Nanoligand Density Regulates the Adhesion and Differentiation of Stem Cells.

Developing materials with remote controllability of macroscale ligand presentation can mimic extracellular matrix (ECM) remodeling to regulate cellular adhesion in vivo. Herein, we designed charged mobile nanoligands with superparamagnetic nanomaterials amine-functionalized and conjugated with polyethylene glycol linker and negatively charged RGD ligand. We coupled negatively a charged nanoligand to a positively charged substrate by optimizing electrostatic interactions to allow reversible planar movement. We demonstrate the imaging of both macroscale and in situ nanoscale nanoligand movement by magnetically attracting charged nanoligand to manipulate macroscale ligand density. We show that in situ magnetic control of attracting charged nanoligand facilitates stem cell adhesion, both in vitro and in vivo, with reversible control. Furthermore, we unravel that in situ magnetic attraction of charged nanoligand stimulates mechanosensing-mediated differentiation of stem cells. This remote controllability of ECM-mimicking reversible ligand variations is promising for regulating diverse reparative cellular processes in vivo.

Electrospun Fibrous Scaffolds for Tissue Engineering: Viewpoints on Architecture and Fabrication.

Electrospinning has been used for the fabrication of extracellular matrix (ECM)-mimicking fibrous scaffolds for several decades. Electrospun fibrous scaffolds provide nanoscale/microscale fibrous structures with interconnecting pores, resembling natural ECM in tissues, and showing a high potential to facilitate the formation of artificial functional tissues. In this review, we summarize the fundamental principles of electrospinning processes for generating complex fibrous scaffold geometries that are similar in structural complexity to the ECM of living tissues. Moreover, several approaches for the formation of three-dimensional fibrous scaffolds arranged in hierarchical structures for tissue engineering are also presented.

Genetically engineered myoblast sheet for therapeutic angiogenesis.

Peripheral arterial disease is a common manifestation of systemic atherosclerosis, which results in more serious consequences of ischemic events in peripheral tissues such as the lower extremities. Cell therapy has been tested as a treatment for peripheral ischemia that functions by inducing angiogenesis in the ischemic region. However, the poor survival and engraftment of transplanted cells limit the efficacy of cell therapy. In order to overcome such challenges, we applied genetically engineered cell sheets using a cell-interactive and thermosensitive hydrogel and nonviral polymer nanoparticles. C2C12 myoblast sheets were formed on Tetronic-tyramine (Tet-TA)-RGD hydrogel prepared through a highly efficient and noncytotoxic enzymatic reaction. The myoblast sheets were then transfected with vascular endothelial growth factor (VEGF) plasmids using poly(ß-amino ester) nanoparticles to increase the angiogenic potential of the sheets. The transfection increased the VEGF expression and secretion from the C2C12 sheets. The enhanced angiogenic effect of the VEGF-transfected C2C12 sheets was confirmed using an in vitro capillary formation assay. More importantly, the transplantation of the VEGF-transfected C2C12 sheets promoted the formation of capillaries and arterioles in ischemic muscles, attenuated the muscle necrosis and fibrosis progressed by ischemia, and eventually prevented ischemic limb loss. In conclusion, the combination of cell sheet engineering and genetic modification can provide more effective treatment for therapeutic angiogenesis.

Cell-homing and immunomodulatory composite hydrogels for effective wound healing with neovascularization.

Wound healing in cases of excessive inflammation poses a significant challenge due to compromised neovascularization. Here, we propose a multi-functional composite hydrogel engineered to overcome such conditions through recruitment and activation of macrophages with adapted degradation of the hydrogel. The composite hydrogel (G-TSrP) is created by combining gelatin methacryloyl (GelMA) and nanoparticles (TSrP) composed of tannic acid (TA) and Sr2+. These nanoparticles are prepared using a one-step mineralization process assisted by metal-phenolic network formation. G-TSrP exhibits the ability to eliminate reactive oxygen species and direct polarization of macrophages toward M2 phenotype. It has been observed that the liberation of TA and Sr2+ from G-TSrP actively facilitate the recruitment and up-regulation of the expression of extracellular matrix remodeling genes of macrophages, and thereby, coordinate in vivo adapted degradation of the G-TSrP. Most significantly, G-TSrP accelerates angiogenesis despite the TA's inhibitory properties, which are counteracted by the released Sr2+. Moreover, G-TSrP enhances wound closure under inflammation and promotes normal tissue formation with strong vessel growth. Genetic analysis confirms macrophage-mediated wound healing by the composite hydrogel. Collectively, these findings pave the way for the development of biomaterials that promote wound healing by creating regenerative environment.

Rapid transfer of endothelial cell sheet using a thermosensitive hydrogel and its effect on therapeutic angiogenesis.

In this study, thermosensitive hydrogels incorporated with multiple cell-interactive factors were developed as a substrate to form monolayer of human umbilical vein endothelial cells (HUVECs) that can be detached and transferrable to target sites as a cell-sheet in response to temperature change. The cell adhesive peptide (RGD) and growth factor (bFGF) covalently incorporated within the hydrogel significantly enhanced adhesion and proliferation of HUVECs, allowing for the formation of their confluent monolayer. Meanwhile, the precisely controllable change in the size of the hydrogels was observed by a repeated increase and decrease in temperature from 37 to 4 °C. By exploiting this unique behavior, the detachment and transfer of HUVEC sheet confluently cultured at 37 °C was rapidly induced within 10 min by expansion of the hydrogels when the temperature was decreased to 4 °C. The transferred cell sheet was highly viable and maintained robust cell-cell junction. Finally, the process of cell sheet transfer was directly applied onto an ischemic injury in the hind limb of mice. The transplanted HUVECs as a sheet retarded tissue necrosis over 14 days in comparison with that of direct injection of the same number of cells. Our results suggest that the developed multifunctional Tetronic-tyramine hydrogels could serve as an ideal substrate to modulate the formation of an endothelial cell layer that could potentially be utilized to treat peripheral arterial disease.

Synergistic stimulation of surface topography and biphasic electric current promotes muscle regeneration.

Developing a universal culture platform that manipulates cell fate is one of the most important tasks in the investigation of the role of the cellular microenvironment. This study focuses on the application of topographical and electrical field stimuli to human myogenic precursor cell (hMPC) cultures to assess the influences of the adherent direction, proliferation, and differentiation, and induce preconditioning-induced therapeutic benefits. First, a topographical surface of commercially available culture dishes was achieved by femtosecond laser texturing. The detachable biphasic electrical current system was then applied to the hMPCs cultured on laser-textured culture dishes. Laser-textured topographies were remarkably effective in inducing the assembly of hMPC myotubes by enhancing the orientation of adherent hMPCs compared with flat surfaces. Furthermore, electrical field stimulation through laser-textured topographies was found to promote the expression of myogenic regulatory factors compared with nonstimulated cells. As such, we successfully demonstrated that the combined stimulation of topographical and electrical cues could effectively enhance the myogenic maturation of hMPCs in a surface spatial and electrical field-dependent manner, thus providing the basis for therapeutic strategies.

On/off switchable physical stimuli regulate the future direction of adherent cellular fate.

The utilization of cell-manipulating techniques reveals information about biological behaviors suited to address a wide range of questions in the field of life sciences. Here, we introduced an on/off switchable physical stimuli technique that offers precise stimuli for reversible cell patterning to allow regulation of the future direction of adherent cellular behavior by leveraging enzymatically degradable alginate hydrogels with defined chemistry and topography. As a proof of concept, targeted muscle cells adherent to TCP exhibited a reshaped structure when the hydrogel-based physical stimuli were applied. This simple tool offers easy manipulation of adherent cells to reshape their morphology and to influence future direction depending on the characteristics of the hydrogel without limitations of time and space. The findings from this study are broadly applicable to investigations into the relationships between cells and physiological extracellular matrix environments as well as has potential to open new horizons for regenerative medicine with manipulated cells.

Urban Particles Elevated Streptococcus pneumoniae Biofilms, Colonization of the Human Middle Ear Epithelial Cells, Mouse Nasopharynx and Transit to the Middle Ear and Lungs.

Air-pollutants containing toxic particulate matters (PM) deposit in the respiratory tract and increases microbial infections. However, the mechanism by which this occurs is not well understood. This study evaluated the effect of urban particles (UP) on Streptococcus pneumoniae (pneumococcus) in vitro biofilm formation, colonization of human middle ear epithelium cells (HMEECs) as well as mouse nasal cavity and its transition to the middle ear and lungs. The in vitro biofilms and planktonic growth of S. pneumoniae were evaluated in metal ion free medium in the presence of UP. Biofilms were quantified by crystal violet (CV) microplate assay, colony forming unit (cfu) counts and resazurin staining. Biofilm structures were analyzed using a scanning electron microscope (SEM) and confocal microscopy (CM). Gene expressions of biofilms were evaluated using real time RT-PCR. Effects of UP exposure on S. pneumoniae colonization to HMEECs were evaluated using fluorescent in-situ hybridization (FISH), cell viability was detected using the Ezcyto kit, apoptosis in HMEECs were evaluated using Annexin-V/PI based cytometry analysis and reactive oxygen species (ROS) production were evaluated using the Oxiselect kit. Alteration of HMEECs gene expressions on UP exposure or pneumococci colonization was evaluated using microarray. In vivo colonization of pneumococci in the presence of UP and transition to middle ear and lungs were evaluated using an intranasal mice colonization model. The UP exposure significantly increased (*p < 0.05) pneumococcal in vitro biofilms and planktonic growth. In the presence of UP, pneumococci formed organized biofilms with a matrix, while in absence of UP bacteria were unable to form biofilms. The luxS, ply, lytA, comA, comB and ciaR genes involved in bacterial pathogenesis, biofilm formation and quorum sensing were up-regulated in pneumococci biofilms grown in the presence of UP. The HMEECs viability was significantly decreased (p < 0.05) and bacteria colonization was significantly elevated (p < 0.05) in co-treatment (UP + S. pneumoniae) when compared to single treatment. Similarly, increased apoptosis and ROS production were detected in HMEECs treated with UP + pneumococci. The microarray analysis of HMEECs revealed that the genes involve in apoptosis and cell death, inflammation, and immune response, were up-regulated in co-treatment and were unchanged or expressed in less fold in single treatments of UP or S. pneumoniae. The in vivo study showed an increased pneumococcal colonization of the nasopharynx in the presence of UP and a higher transition of bacteria to the middle ear and lungs in the presence of UP. The UP exposure elevated S. pneumoniae in vitro biofilm and colonization of HMEECs, and in vivo mouse nasopharyngeal colonization, and increased dissemination to mouse middle ear and lungs.

Biodegradable Magnesium Alloys Promote Angio-Osteogenesis to Enhance Bone Repair.

Biodegradable metallic materials represent a potential step-change technology that may revolutionize the treatment of broken bones. Implants made with biodegradable metals are significantly stronger than their polymer counterparts and fully biodegradable in vivo, removing the need for secondary surgery or long-term complications. Here, it is shown how clinically approved Mg alloy promotes improved bone repair using an integrated state of the art fetal mouse metatarsal assay coupled with in vivo preclinical studies, second harmonic generation, secretome array analysis, perfusion bioreactor, and high-resolution 3D confocal imaging of vasculature within skeletal tissue, to reveal a vascular-mediated pro-osteogenic mechanism controlling enhanced tissue regeneration. The optimized mechanical properties and corrosion rate of the Mg alloy lead to a controlled release of metallic Mg, Ca, and Zn ions at a rate that facilitates both angiogenesis and coupled osteogenesis for better bone healing, without causing adverse effects at the implantation site. The findings from this study support ongoing development and refinement of biodegradable metal systems to act as crucial portal technologies with significant potential to improve many clinical applications.

Femtosecond laser induced nano-textured micropatterning to regulate cell functions on implanted biomaterials.

Posterior capsular opacification (PCO) is the most common complication of cataract surgery. PCO is due to the proliferation, migration, and epithelial-to-mesenchymal transition of the residual lens epithelial cells (LECs) within the lens capsule. As surface topography influences cellular response, we investigated the effect of modulating the dimensions of periodic nano-textured patterns on the surface of an intraocular lens material to regulate lens epithelial cell functions such as cell adhesion, migration, orientation, and proliferation. Patterned poly(HEMA) samples were prepared by a femtosecond laser microfabrication, and the behaviors of human B-3 LECs were observed on groove/ridge patterns with widths varying from 5 to 40 µm. In the presence of ridge and groove patterns, the adherent cells elongated along the direction of the patterns, and f-actin of the cells was spread to a lesser extent on the nano-textured groove surfaces. Both single and collective cell migrations were significantly inhibited in the perpendicular direction of the patterns on the nano-textured micro-patterned samples. We also fabricated the patterns on the curved surface of a commercially available intraocular lens for in vivo evaluation. In vivo results showed that a patterned IOL could help suppress the progression of PCO by inhibiting cell migration from the edge to the center of the IOL. Our reports demonstrate that nano- and microscale topographical patterns on a biomaterial surface can regulate cellular behavior when it is implanted into animals.

Independent Tuning of Nano-Ligand Frequency and Sequences Regulates the Adhesion and Differentiation of Stem Cells.

The native extracellular matrix (ECM) can exhibit heterogeneous nano-sequences periodically displaying ligands to regulate complex cell-material interactions in vivo. Herein, an ECM-emulating heterogeneous barcoding system, including ligand-bearing Au and ligand-free Fe nano-segments, is developed to independently present tunable frequency and sequences in nano-segments of cell-adhesive RGD ligand. Specifically, similar exposed surface areas of total Fe and Au nano-segments are designed. Fe segments are used for substrate coupling of nanobarcodes and as ligand-free nano-segments and Au segments for ligand coating while maintaining both nanoscale (local) and macroscale (total) ligand density constant in all groups. Low nano-ligand frequency in the same sequences and terminally sequenced nano-ligands at the same frequency independently facilitate focal adhesion and mechanosensing of stem cells, which are collectively effective both in vitro and in vivo, thereby inducing stem cell differentiation. The Fe/RGD-Au nanobarcode implants exhibit high stability and no local and systemic toxicity in various tissues and organs in vivo. This work sheds novel insight into designing biomaterials with heterogeneous nano-ligand sequences at terminal sides and/or low frequency to facilitate cellular adhesion. Tuning the electrodeposition conditions can allow synthesis of unlimited combinations of ligand nano-sequences and frequencies, magnetic elements, and bioactive ligands to remotely regulate numerous host cells in vivo.

Transgenic zebrafish model for quantification and visualization of tissue toxicity caused by alloying elements in newly developed biodegradable metal.

The cytotoxicity of alloying elements in newly developed biodegradable metals can be assessed through relatively low-cost and rapid in vitro studies using different cell types. However, such approaches have limitations; as such, additional investigations in small mammalian models are required that recapitulate the physiological environment. In this study, we established a zebrafish (Danio rerio) model for cytotoxicity evaluations that combines the physiological aspects of an animal model with the speed and simplicity of a cell-based assay. The model was used to assess the cytotoxicity of five common alloying elements in biodegradable implant materials. Conventional in vitro testing using heart, liver, and endothelial cell lines performed in parallel with zebrafish studies revealed statistically significant differences in toxicity (up to 100-fold), along with distinct changes in the morphology of the heart, liver, and blood vessels that were undetectable in cell cultures. These results indicate that our zebrafish model is a useful alternative to mammalian systems for accurately and rapidly evaluating the in vivo toxicity of newly developed metallic materials.

Effect of spatial arrangement and structure of hierarchically patterned fibrous scaffolds generated by a femtosecond laser on cardiomyoblast behavior.

Biological responses on biomaterials occur either on their surface or at the interface. Therefore, surface characterization is an essential step in the fabrication of ideal biomaterials for achieving effective control of the interaction between the material surface and the biological environment. Herein, we applied femtosecond laser ablation on electrospun fibrous scaffolds to fabricate various hierarchical patterns with a focus on the alignment of cells. We investigated the simultaneously stimulated response of cardiomyoblasts based on multiple topographical cues, including scales, oriented directions, and spatial arrangements, in the fibrous scaffolds. Our results demonstrated a synergistic effect on cell behaviors of one or more structural arrangements in a homogeneous orientation, whereas antagonistic effects were observed for cells arranged on a surface with heterogeneous directions. Taken together, these results indicate that our hierarchically patterned fibrous scaffolds may be useful tools for understanding the cellular behavior on fibrous scaffolds used to mimic an extracellular matrix-like environment. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1732-1742, 2018.

Spatially Assembled Bilayer Cell Sheets of Stem Cells and Endothelial Cells Using Thermosensitive Hydrogels for Therapeutic Angiogenesis.

Although the coculture of multiple cell types has been widely employed in regenerative medicine, in vivo transplantation of cocultured cells while maintaining the hierarchical structure remains challenging. Here, a spatially assembled bilayer cell sheet of human mesenchymal stem cells and human umbilical vein endothelial cells on a thermally expandable hydrogel containing fibronectin is prepared and its effect on in vitro proangiogenic functions and in vivo ischemic injury is investigated. The expansion of hydrogels in response to a temperature change from 37 to 4 °C allows rapid harvest and delivery of the bilayer cell sheet to two different targets (an in vitro model glass surface and in vivo tissue). The in vitro study confirms that the bilayer sheet significantly increases proangiogenic functions such as the release of nitric oxide and expression of vascular endothelial cell genes. In addition, transplantation of the cell sheet from the hydrogels into a hindlimb ischemia mice model demonstrates significant retardation of necrosis particularly in the group transplated with the bilayer sheet. Collectively, the bilayer cell sheet is readily transferrable from the thermally expandable hydrogel and represents an alternative approach for recovery from ischemic injury, potentially via improved cell-cell communication.

Engineering an aligned endothelial monolayer on a topologically modified nanofibrous platform with a micropatterned structure produced by femtosecond laser ablation.

A monolayer of endothelial cells (ECs) aligned along the direction of blood flow plays crucial roles in the regulation of anti-thrombogenic and pro-inflammatory reactions in the blood vessel wall. Thus, many researchers have attempted to mimic the aligned structure of ECs in vascular grafts or tissue-engineered blood vessels. In the present study, we fabricated micro-groove patterned nanofibers using a femtosecond laser ablation technique to recapitulate the densely organized anisotropic architecture of the endothelial layer. Femtosecond laser ablation enabled us to generate high-resolution groove patterns (10 µm width) with 20 or 80 µm gaps on randomly oriented electrospun nanofibers. The patterned nanofibers exhibited anisotropic (transverse: 101.1 ± 4.0° and longitudinal: 123.5 ± 9.4°) water contact angles; however, the mechanical properties were consistent in both directions. The micropatterned nanofibers modulated the aligned structure or aspect ratio (20 µm: 0.23 ± 0.11 and 80 µm: 0.42 ± 0.18) of ECs along the pattern direction. In particular, the engineered aligned endothelial layer was effective in eliciting an anti-inflammatory response (approximately 50% greater than that of random or aligned nanofibers), thereby effectively preventing monocyte adhesion following activation by TNF-α treatment. Therefore, micropatterning by laser ablation can be utilized to generate high-resolution microgrooves on various substrates, thereby providing fundamental platforms for vascular tissue engineering.

Ultrathin Metal Films with Defined Topographical Structures as In Vitro Cell Culture Platforms for Unveiling Vascular Cell Behaviors.

Implanted material surfaces make direct contact with body tissues to work on its own purpose. Therefore, studies of the surface properties of implantable materials that determine cell fate are very important for successful implantation. Although numerous studies have addressed the relationship between cells and material surfaces, nonmetallic surfaces and metallic surfaces likely produce different cellular responses because of their intrinsic differences in surface energy, roughness, and chemical composition. Moreover, given the nontransparent property of metal materials, which hampers the real-time imaging of cellular behavior, a detailed cellular-level analysis at the metal-tissue interface has not been performed. In this study, metal-based cell culture platforms (MCPs) with defined microscale topographical patterns are developed using a combination of photolithography and direct current magnetron sputtering techniques. The MCPs allow to observe vascular cells on metals in real time and identify the selective regulation of human aortic smooth muscle cells and Human umbilical vein endothelial cells (HUVECs) by metallic surface topography. Additionally, atomic force microscopy, contact angles, and energy-dispersive X-ray spectroscopy analyses show that the MCPs exhibit nearly identical chemical properties with their bulk counterparts, demonstrating that MCPs can be utilized as an in vitro cell culture platform system for understanding the cellular behavior on metal substrates.

Creating Hierarchical Topographies on Fibrous Platforms Using Femtosecond Laser Ablation for Directing Myoblasts Behavior.

Developing an artificial extracellular matrix that closely mimics the native tissue microenvironment is important for use as both a cell culture platform for controlling cell fate and an in vitro model system for investigating the role of the cellular microenvironment. Electrospinning, one of the methods for fabricating structures that mimic the native ECM, is a promising technique for creating fibrous platforms. It is well-known that align or randomly distributed electrospun fibers provide cellular contact guidance in a single pattern. However, native tissues have hierarchical structures, i.e., topographies on the micro- and nanoscales, rather than a single structure. Thus, we fabricated randomly distributed nanofibrous (720 ± 80 nm in diameter) platforms via a conventional electrospinning process, and then we generated microscale grooves using a femtosecond laser ablation process to develop engineered fibrous platforms with patterned hierarchical topographies. The engineered fibrous platforms can regulate cellular adhesive morphology, proliferation, and distinct distribution of focal adhesion proteins. Furthermore, confluent myoblasts cultured on the engineered fibrous platforms revealed that the direction of myotube assembly can be controlled. These results indicate that our engineered fibrous platforms may be useful tools in investigating the roles of nano- and microscale topographies in the communication between cells and ECM.