Packaging and Optimization of a Capacitive Biosensor and Its Readout Circuit.

In pipeline production, there is a considerable distance between the moment when the operation principle of a biosensor will be verified in the laboratory until the moment when it can be used in real conditions. This distance is often covered by an optimization and packaging process. This article described the packaging and optimization of a SARS-CoV-2 biosensor, as well as the packaging of its electronic readout circuit. The biosensor was packed with a photosensitive tape, which forms a protective layer and is patterned in a way to form a well in the sensing area. The well is meant to limit the liquid diffusion, thereby reducing the measurement error. Subsequently, a connector between the biosensor and its readout circuit was designed and 3D-printed, ensuring the continuous and easy reading of the biosensor. In the last step, a three-dimensional case was designed and printed, thus protecting the circuit from any damage, and allowing its operation in real conditions.

Identification of Two Commercial Pesticides by a Nanoparticle Gas-Sensing Array.

This study presents the experimental testing of a gas-sensing array, for the detection of two commercially available pesticides (i.e., Chloract 48 EC and Nimrod), towards its eventual use along a commercial smart-farming system. The array is comprised of four distinctive sensing devices based on nanoparticles, each functionalized with a different gas-absorbing polymeric layer. As discussed herein, the sensing array is able to identify as well as quantify three gas-analytes, two pesticide solutions, and relative humidity, which acts as a reference analyte. All of the evaluation experiments were conducted in close to real-life conditions; specifically, the sensors response towards the three analytes was tested in three relative humidity backgrounds while the effect of temperature was also considered. The unique response patterns generated after the exposure of the sensing-array to the two gas-analytes were analyzed using the common statistical analysis tool Principal Component Analysis (PCA). The sensing array, being compact, low-cost, and highly sensitive, can be easily integrated with pre-existing crop-monitoring solutions. Given that there are limited reports for effective pesticide gas-sensing solutions, the proposed gas-sensing technology would significantly upgrade the added-value of the integrated system, providing it with unique advantages.

A sensing approach for automated and real-time pesticide detection in the scope of smart-farming.

The increased use of pesticides across the globe has a major impact on public health. Advanced sensing methods are considered of significant importance to ensure that pesticide use on agricultural products remains within safety limits. This study presents the experimental testing of a hybrid, nanomaterial based gas-sensing array, for the detection of a commercial organophosphate pesticide, towards its integration in a holistic smart-farming tool such as the "gaiasense" system. The sensing array utilizes nanoparticles (NPs) as the conductive layer of the device while four distinctive polymeric layers (superimposed on top of the NP layer) act as the gas-sensitive layer. The sensing array is ultimately called to discern between two gas-analytes: Chloract 48 EC (a chlorpyrifos based insecticide) and Relative Humidity (R.H.) which acts as a reference analyte since is anticipated to be present in real-field conditions. The unique response patterns generated after the exposure of the sensing-array to the two gas-analytes were analysed using a common statistical analysis tool, namely Principal Component Analysis (PCA). PCA has validated the ability of the array to detect, quantify as well as to differentiate between R.H. and Chloract. The sensing array being compact, low-cost and highly sensitive (LOD in the order of ppb for chlorpyrifos) can be effectively integrated with pre-existing crop-monitoring solutions such as the gaiasense.

Integrated Plastic Microfluidic Device for Heavy Metal Ion Detection.

The presence of heavy metal ions in soil, air and water constitutes an important global environmental threat, as these ions accumulate throughout the food chain, contributing to the rise of chronic diseases, including, amongst others, cancer and kidney failure. To date, many efforts have been made for their detection, but there is still a need for the development of sensitive, low-cost, and portable devices able to conduct on-site detection of heavy metal ions. In this work, we combine microfluidic technology and electrochemical sensing in a plastic chip for the selective detection of heavy metal ions utilizing DNAzymes immobilized in between platinum nanoparticles (PtNPs), demonstrating a reliable portable solution for water pollution monitoring. For the realization of the microfluidic-based heavy metal ion detection device, a fast and easy-to-implement fabrication method based on the photolithography of dry photosensitive layers is proposed. As a proof of concept, we demonstrate the detection of Pb2+ ions using the prototype microfluidic device.