Shadowed versus Etched Superconductor-Semiconductor Junctions in Al/InAs Nanowires.

Hybrid semiconductor-superconductor nanowires have emerged as a cornerstone in modern quantum devices. Integrating such nanowires into hybrid devices typically requires extensive postgrowth processing which may affect device performance unfavorably. Here, we present a technique for in situ shadowing superconductors on nanowires and compare the structural and electronic properties of Al junctions formed by shadowing versus etching. Based on transmission electron microscopy, we find that typical etching procedures lead to atomic-scale surface roughening. This surface perturbation may cause a reduction of the electron mobility as demonstrated in transport measurements. Further, we display advanced shadowing geometries aiding in the pursuit of bringing fabrication of hybrid devices in situ. Finally, we give examples of shadowed junctions exploited in various device geometries that exhibit high-quality quantum transport signatures.

Heat Dissipation Mechanisms in Hybrid Superconductor-Semiconductor Devices Revealed by Joule Spectroscopy.

Understanding heating and cooling mechanisms in mesoscopic superconductor-semiconductor devices is crucial for their application in quantum technologies. Owing to their poor thermal conductivity, heating effects can drive superconducting-to-normal transitions even at low bias, observed as sharp conductance dips through the loss of Andreev excess currents. Tracking such dips across magnetic field, cryostat temperature, and applied microwave power allows us to uncover cooling bottlenecks in different parts of a device. By applying this "Joule spectroscopy" technique, we analyze heat dissipation in devices based on InAs-Al nanowires and reveal that cooling of superconducting islands is limited by the rather inefficient electron-phonon coupling, as opposed to grounded superconductors that primarily cool by quasiparticle diffusion. We show that powers as low as 50-150 pW are able to suppress superconductivity on the islands. Applied microwaves lead to similar heating effects but are affected by the interplay of the microwave frequency and the effective electron-phonon relaxation time.

Electronic Transport in Double-Nanowire Superconducting Islands with Multiple Terminals.

We characterize in situ grown parallel nanowires bridged by a superconducting island. The magnetic-field and temperature dependence of Coulomb blockade peaks measured across different pairs of nanowire ends suggest the presence of a subgap state extended over the hybrid parallel-nanowire island. Being gate-tunable, accessible by multiple terminals, and free of quasiparticle poisoning, these nanowires show promise for the implementation of several proposals that rely on parallel nanowire platforms.

Enhancing the NIR Photocurrent in Single GaAs Nanowires with Radial p-i-n Junctions by Uniaxial Strain.

III-V compound nanowires have electrical and optical properties suitable for a wide range of applications, including photovoltaics and photodetectors. Furthermore, their elastic nature allows the use of strain engineering to enhance their performance. Here we have investigated the effect of mechanical strain on the photocurrent and the electrical properties of single GaAs nanowires with radial p-i-n junctions, using a nanoprobing setup. A uniaxial tensile strain of 3% resulted in an increase in photocurrent by more than a factor of 4 during NIR illumination. This effect is attributed to a decrease of 0.2 eV in nanowire bandgap energy, revealed by analysis of the current-voltage characteristics as a function of strain. This analysis also shows how other properties are affected by the strain, including the nanowire resistance. Furthermore, electron-beam-induced current maps show that the charge collection efficiency within the nanowire is unaffected by strain measured up to 0.9%.

Andreev Molecule in Parallel InAs Nanowires.

Coupling individual atoms fundamentally changes the state of matter: electrons bound to atomic cores become delocalized turning an insulating state to a metallic one. A chain of atoms could lead to more exotic states if the tunneling takes place via the superconducting vacuum and can induce topologically protected excitations like Majorana or parafermions. Although coupling a single atom to a superconductor is well studied, the hybridization of two sites with individual tunability was not reported yet. The peculiar vacuum of the Bardeen-Cooper-Schrieffer (BCS) condensate opens the way to annihilate or generate two electrons from the bulk resulting in a so-called Andreev molecular state. By employing parallel nanowires with an Al shell, two artificial atoms were created at a minimal distance with an epitaxial superconducting link between. Hybridization via the BCS vacuum was observed and the spectrum of an Andreev molecule as a function of level positions was explored for the first time.

Superconductivity and Parity Preservation in As-Grown In Islands on InAs Nanowires.

We report in situ synthesis of crystalline indium islands on InAs nanowires grown by molecular beam epitaxy. Structural analysis by transmission electron microscopy showed that In crystals grew in a tetragonal body-centered crystal structure within two families of orientations relative to wurtzite InAs. The crystalline islands had lengths < 500 nm and low-energy surfaces, suggesting that growth was driven mainly by surface energy minimization. Electrical transport through In/InAs devices exhibited Cooper pair charging, evidencing charge parity preservation and a pristine In/InAs interface, with an induced superconducting gap ∼ 0.45 meV. Cooper pair charging persisted to temperatures > 1.2 K and magnetic fields ∼ 0.7 T, demonstrating that In/InAs hybrids belong to an expanding class of semiconductor/superconductor hybrids operating over a wider parameter space than state-of-the-art Al-based hybrids. Engineering crystal morphology while isolating single islands using shadow epitaxy provides an interesting alternative to previous semiconductor/superconductor hybrid morphologies and device geometries.

Gate-Controlled Supercurrent in Epitaxial Al/InAs Nanowires.

Gate-controlled supercurrent (GCS) in superconducting nanobridges has recently attracted attention as a means to create superconducting switches. Despite the clear advantages for applications, the microscopic mechanism of this effect is still under debate. In this work, we realize GCS for the first time in a highly crystalline superconductor epitaxially grown on an InAs nanowire. We show that the supercurrent in the epitaxial Al layer can be switched to the normal state by applying ≃±23 V on a bottom gate insulated from the nanowire by a crystalline hBN layer. Our extensive study of the temperature and magnetic field dependencies suggests that the electric field is unlikely to be the origin of GCS in our device. Though hot electron injection alone cannot explain our experimental findings, a very recent non-equilibrium phonons based picture is compatible with most of our results.

Semiconductor-Ferromagnetic Insulator-Superconductor Nanowires: Stray Field and Exchange Field.

Nanowires can serve as flexible substrates for hybrid epitaxial growth on selected facets, allowing for the design of heterostructures with complex material combinations and geometries. In this work we report on hybrid epitaxy of freestanding vapor-liquid-solid grown and in-plane selective area grown semiconductor-ferromagnetic insulator-superconductor (InAs/EuS/Al) nanowire heterostructures. We study the crystal growth and complex epitaxial matching of wurtzite and zinc-blende InAs/rock-salt EuS interfaces as well as rock-salt EuS/face-centered cubic Al interfaces. Because of the magnetic anisotropy originating from the nanowire shape, the magnetic structure of the EuS phase is easily tuned into single magnetic domains. This effect efficiently ejects the stray field lines along the nanowires. With tunnel spectroscopy measurements of the density of states, we show that the material has a hard induced superconducting gap, and magnetic hysteretic evolution which indicates that the magnetic exchange fields are not negligible. These hybrid nanowires fulfill key material requirements for serving as a platform for spin-based quantum applications, such as scalable topological quantum computing.

Superconducting vanadium/indium-arsenide hybrid nanowires.

We report MBE synthesis of InAs/vanadium hybrid nanowires. The vanadium was deposited without breaking ultra-high vacuum after InAs nanowire growth, minimizing any effect of oxidation and contamination at the interface between the two materials. We investigated four different substrate temperatures during vanadium deposition, ranging from -150 °C to 250 °C. The structural relation between vanadium and InAs depended on the deposition temperature. The three lower temperature depositions gave vanadium shells with a polycrystalline, granular morphology and the highest temperature resulted in vanadium reacting with the InAs nanowire. We fabricated electronic devices from the hybrid nanowires and obtained a high out-of-plane critical magnetic field, exceeding the bulk value for vanadium. However, size effects arising from the nanoscale grains resulted in the absence of a well-defined critical temperature, as well as device-to-device variation in the resistivity versus temperature dependence during the transition to the superconducting state.

Growth of InAs Wurtzite Nanocrosses from Hexagonal and Cubic Basis.

Epitaxially connected nanowires allow for the design of electron transport experiments and applications beyond the standard two terminal device geometries. In this Letter, we present growth methods of three distinct types of wurtzite structured InAs nanocrosses via the vapor-liquid-solid mechanism. Two methods use conventional wurtzite nanowire arrays as a 6-fold hexagonal basis for growing single crystal wurtzite nanocrosses. A third method uses the 2-fold cubic symmetry of (100) substrates to form well-defined coherent inclusions of zinc blende in the center of the nanocrosses. We show that all three types of nanocrosses can be transferred undamaged to arbitrary substrates, which allows for structural, compositional, and electrical characterization. We further demonstrate the potential for synthesis of as-grown nanowire networks and for using nanowires as shadow masks for in situ fabricated junctions in radial nanowire heterostructures.

Ag-catalyzed InAs nanowires grown on transferable graphite flakes.

Semiconducting nanowires grown by quasi-van-der-Waals epitaxy on graphite flakes are a new class of hybrid materials that hold promise for scalable nanostructured devices within opto-electronics. Here we report on high aspect ratio and stacking fault free Ag-seeded InAs nanowires grown on exfoliated graphite flakes by molecular beam epitaxy. Ag catalyzes the InAs nanowire growth selectively on the graphite flakes and not on the underlying InAs substrates. This allows for easy transfer of the flexible graphite flakes with as-grown nanowire ensembles to arbitrary substrates by a micro-needle manipulator. Besides the possibilities for fabricating novel nanostructure device designs, we show how this method is used to study the parasitic growth and bicrystal match between the graphite flake and the nanowires by transmission electron microscopy.

Morphology and composition of oxidized InAs nanowires studied by combined Raman spectroscopy and transmission electron microscopy.

Any device exposed to ambient conditions will be prone to oxidation. This may be of particular importance for semiconductor nanowires because of the high surface-to-volume ratio and only little is known about the consequences of oxidation for these systems. Here, we study the properties of indium arsenide nanowires which were locally oxidized using a focused laser beam. Polarization dependent micro-Raman measurements confirmed the presence of crystalline arsenic, and transmission electron microscopy diffraction showed the presence of indium oxide. The surface dependence of the oxidation was investigated in branched nanowires grown along the [Formula: see text] and [Formula: see text] wurtzite crystal directions exhibiting different surface facets. The oxidation did not occur at the [Formula: see text] direction. The origin of this selectivity is discussed in terms transition state kinetics of the free surfaces of the different crystal families of the facets and numerical simulations of the laser induced heating.

Signatures of Gate-Driven Out-of-Equilibrium Superconductivity in Ta/InAs Nanowires.

Understanding the microscopic origin of the gate-controlled supercurrent (GCS) in superconducting nanobridges is crucial for engineering superconducting switches suitable for a variety of electronic applications. The origin of GCS is controversial, and various mechanisms have been proposed to explain it. In this work, we have investigated the GCS in a Ta layer deposited on the surface of InAs nanowires. Comparison between switching current distributions at opposite gate polarities and between the gate dependence of two opposite side gates with different nanowire-gate spacings shows that the GCS is determined by the power dissipated by the gate leakage. We also found a substantial difference between the influence of the gate and elevated bath temperature on the magnetic field dependence of the supercurrent. Detailed analysis of the switching dynamics at high gate voltages shows that the device is driven into the multiple phase slips regime by high-energy fluctuations arising from the leakage current.

Asymmetric Little-Parks oscillations in full shell double nanowires.

Little-Parks oscillations of a hollow superconducting cylinder are of interest for flux-driven topological superconductivity in single Rashba nanowires. The oscillations are typically symmetric in the orientation of the applied magnetic flux. Using double InAs nanowires coated by an epitaxial superconducting Al shell which, despite the non-centro-symmetric geometry, behaves effectively as one hollow cylinder, we demonstrate that a small misalignment of the applied parallel field with respect to the axis of the nanowires can produce field-asymmetric Little-Parks oscillations. These are revealed by the simultaneous application of a magnetic field perpendicular to the misaligned parallel field direction. The asymmetry occurs in both the destructive regime, in which superconductivity is destroyed for half-integer quanta of flux through the shell, and in the non-destructive regime, where superconductivity is depressed but not fully destroyed at these flux values.

Epitaxial Pb on InAs nanowires for quantum devices.

Semiconductor-superconductor hybrids are widely used to realize complex quantum phenomena, such as topological superconductivity and spins coupled to Cooper pairs. Accessing new, exotic regimes at high magnetic fields and increasing operating temperatures beyond the state-of-the-art requires new, epitaxially matched semiconductor-superconductor materials. One challenge is the generation of favourable conditions for heterostructural formation between materials with the desired properties. Here we harness an increased knowledge of metal-on-semiconductor growth to develop InAs nanowires with epitaxially matched, single-crystal, atomically flat Pb films with no axial grain boundaries. These highly ordered heterostructures have a critical temperature of 7 K and a superconducting gap of 1.25 meV, which remains hard at 8.5 T, and therefore they offer a parameter space more than twice as large as those of alternative semiconductor-superconductor hybrids. Additionally, InAs/Pb island devices exhibit magnetic field-driven transitions from a Cooper pair to single-electron charging, a prerequisite for use in topological quantum computation. Semiconductor-Pb hybrids potentially enable access to entirely new regimes for a number of different quantum systems.

Shadow Epitaxy for In Situ Growth of Generic Semiconductor/Superconductor Hybrids.

Uniform, defect-free crystal interfaces and surfaces are crucial ingredients for realizing high-performance nanoscale devices. A pertinent example is that advances in gate-tunable and topological superconductivity using semiconductor/superconductor electronic devices are currently built on the hard proximity-induced superconducting gap obtained from epitaxial indium arsenide/aluminum heterostructures. Fabrication of devices requires selective etch processes; these exist only for InAs/Al hybrids, precluding the use of other, potentially superior material combinations. This work introduces a crystal growth platform-based on 3D structuring of growth substrates-which enables synthesis of semiconductor nanowire hybrids with in situ patterned superconductor shells. The platform eliminates the need for etching, thereby enabling full freedom in the choice of hybrid constituents. All of the most frequently used superconducting hybrid device architectures are realized and characterized. These devices exhibit increased yield and electrostatic stability compared to etched devices, and evidence of ballistic superconductivity is observed. In addition to aluminum, hybrid structures based on tantalum, niobium, and vanadium are presented.