RESUMO
The objective of the research presented in this paper was to provide a novel open-source strain gauge system that shall enable the measurement of the pressure of a runner's feet on the ground and the presentation of the results of that measurement to the user. The system based on electronic shoe inserts with 16 built-in pressure sensors laminated in a transparent film was created, consisting of two parts: a mobile application and a wearable device. The developed system provides a number of advantages in comparison with existing solutions, including no need for calibration, an accurate and frequent measurement of pressure distribution, placement of electronics on the outside of a shoe, low cost, and an open-source approach to encourage enhancements and open collaboration.
RESUMO
Urbanization is a big concern for both developed and developing countries in recent years. People shift themselves and their families to urban areas for the sake of better education and a modern lifestyle. Due to rapid urbanization, cities are facing huge challenges, one of which is waste management, as the volume of waste is directly proportional to the people living in the city. The municipalities and the city administrations use the traditional wastage classification techniques which are manual, very slow, inefficient and costly. Therefore, automatic waste classification and management is essential for the cities that are being urbanized for the better recycling of waste. Better recycling of waste gives the opportunity to reduce the amount of waste sent to landfills by reducing the need to collect new raw material. In this paper, the idea of a real-time smart waste classification model is presented that uses a hybrid approach to classify waste into various classes. Two machine learning models, a multilayer perceptron and multilayer convolutional neural network (ML-CNN), are implemented. The multilayer perceptron is used to provide binary classification, i.e., metal or non-metal waste, and the CNN identifies the class of non-metal waste. A camera is placed in front of the waste conveyor belt, which takes a picture of the waste and classifies it. Upon successful classification, an automatic hand hammer is used to push the waste into the assigned labeled bucket. Experiments were carried out in a real-time environment with image segmentation. The training, testing, and validation accuracy of the purposed model was 0.99% under different training batches with different input features.
Assuntos
Aprendizado de Máquina , Redes Neurais de Computação , Cidades , Mãos , HumanosRESUMO
The emerging wearable medical devices open up new opportunities for the provision of health services and promise to accelerate the development of novel telemedical services. The main objective of this study was to investigate the desirable features and applications of telemedical services for the Polish older adults delivered by wearable medical devices. The questionnaire study was conducted among 146 adult volunteers in two cohorts (C.1: <65 years vs. C.2: ≥65 years). The analysis was based on qualitative research and descriptive statistics. Comparisons were performed by Pearson's chi-squared test. The questionnaire, which was divided into three parts (1-socio-demographic data, needs, and behaviors; 2-health status; 3-telemedicine service awareness and device concept study), consisted of 37 open, semi-open, or closed questions. Two cohorts were analyzed (C.1: n = 77; mean age = 32 vs. C.2: n = 69; mean age = 74). The performed survey showed that the majority of respondents were unaware of the telemedical services (56.8%). A total of 62.3% of C.1 and 34.8% of C.2 declared their understanding of telemedical services. The 10.3% of correct explanations regarding telemedical service were found among all study participants. The most desirable feature was the detection of life-threatening and health-threatening situations (65.2% vs. 66.2%). The findings suggest a lack of awareness of telemedical services and the opportunities offered by wearable telemedical devices.
Assuntos
Telemedicina/instrumentação , Dispositivos Eletrônicos Vestíveis , Adulto , Idoso , Betacoronavirus , COVID-19 , Estudos de Coortes , Infecções por Coronavirus/epidemiologia , Feminino , Geriatria/instrumentação , Humanos , Masculino , Pessoa de Meia-Idade , Monitorização Ambulatorial/instrumentação , Avaliação das Necessidades , Pandemias , Pneumonia Viral/epidemiologia , Polônia/epidemiologia , Tecnologia de Sensoriamento Remoto/instrumentação , SARS-CoV-2 , Inquéritos e Questionários , Tecnologia sem Fio/instrumentaçãoRESUMO
High capacity long haul communication and cost-effective solutions for low loss transmission are the major advantages of optical fibers, which makes them a promising solution to be used for backhaul network transportation. A distortion-tolerant 100 Gbps framework that consists of long haul and high capacity transport based wavelength division multiplexed (WDM) system is investigated in this paper, with an analysis on different design parameters to mitigate the amplified spontaneous emission (ASE) noise and nonlinear effects due to the fiber transmission. The performance degradation in the presence of non-linear effects is evaluated and a digital signal processing (DSP) assisted receiver is proposed in order to achieve bit error rate (BER) of 1.56 × 10-6 and quality factor (Q-factor) of 5, using 25 and 50 GHz channel spacing with 90 µm2 effective area of the optical fiber. Analytical calculations of the proposed WDM system are presented and the simulation results verify the effectiveness of the proposed approach in order to mitigate non-linear effects for up to 300 km length of optical fiber transmission.
RESUMO
With the recent advancement in wearable computing, sensor technologies, and data processing approaches, it is possible to develop smart clothing that integrates sensors into garments. The main objective of this study was to develop the method of automatic recognition of sedentary behavior related to cardiovascular risk based on quantitative measurement of physical activity. The solution is based on the designed prototype of the smart shirt equipped with a processor, wearable sensors, power supply and telemedical interface. The data derived from wearable sensors were used to create feature vector that consisted of the estimation of the user-specific relative intensity and the variance of filtered accelerometer data. The method was validated using an experimental protocol which was designed to be safe for the elderly and was based on clinically validated short physical performance battery (SPPB) test tasks. To obtain the recognition model six classifiers were examined and compared including Linear Discriminant Analysis, Support Vector Machines, K-Nearest Neighbors, Naive Bayes, Binary Decision Trees and Artificial Neural Networks. The classification models were able to identify the sedentary behavior with an accuracy of 95.00% ± 2.11%. Experimental results suggested that high accuracy can be obtained by estimating sedentary behavior pattern using the smart shirt and machine learning approach. The main advantage of the developed method to continuously monitor patient activities in a free-living environment and could potentially be used for early detection of increased cardiovascular risk.
Assuntos
Atividades Cotidianas , Doenças Cardiovasculares/diagnóstico , Aprendizado de Máquina , Comportamento Sedentário , Telemedicina/instrumentação , Telemedicina/métodos , Dispositivos Eletrônicos Vestíveis , Adulto , Doenças Cardiovasculares/psicologia , Feminino , Humanos , Masculino , Medição de RiscoRESUMO
This paper presents a multimodal system for seamless surveillance of elderly people in their living environment. The system uses simultaneously a wearable sensor network for each individual and premise-embedded sensors specific for each environment. The paper demonstrates the benefits of using complementary information from two types of mobility sensors: visual flow-based image analysis and an accelerometer-based wearable network. The paper provides results for indoor recognition of several elementary poses and outdoor recognition of complex movements. Instead of complete system description, particular attention was drawn to a polar histogram-based method of visual pose recognition, complementary use and synchronization of the data from wearable and premise-embedded networks and an automatic danger detection algorithm driven by two premise- and subject-related databases. The novelty of our approach also consists in feeding the databases with real-life recordings from the subject, and in using the dynamic time-warping algorithm for measurements of distance between actions represented as elementary poses in behavioral records. The main results of testing our method include: 95.5% accuracy of elementary pose recognition by the video system, 96.7% accuracy of elementary pose recognition by the accelerometer-based system, 98.9% accuracy of elementary pose recognition by the combined accelerometer and video-based system, and 80% accuracy of complex outdoor activity recognition by the accelerometer-based wearable system.
Assuntos
Acelerometria/instrumentação , Actigrafia/instrumentação , Comportamento/fisiologia , Redes de Comunicação de Computadores/instrumentação , Imageamento Tridimensional/instrumentação , Monitorização Ambulatorial/instrumentação , Gravação em Vídeo/instrumentação , Desenho de Equipamento , Análise de Falha de Equipamento , Humanos , Integração de SistemasRESUMO
Wearable devices play a growing role in healthcare applications and disease prevention. We conducted a retrospective study to assess cardiovascular and pre-frailty risk during the Covid-19 shelter-in-place measures on human activity patterns based on multimodal biomarkers collected from smartwatch sensors. For methodology validation we enrolled five adult participants (age range: 32 to 84 years; mean 57 ± 22.38; BMI: 27.80 ± 2.95 kg/m2) categorized by age who were smartwatch users and self-isolating at home during the Covid-19 pandemic. Resting heart rate, daily steps, and minutes asleep were recorded using smartwatch sensors. Overall, we created a dataset of 464 days of continuous measurement that included 50 days of self-isolation at home during the Covid-19 pandemic. Student's t-test was used to determine significant differences between the pre-Covid-19 and Covid-19 periods. Our findings suggest that there was a significant decrease in the number of daily steps (-57.21%; -4321; 95% CI, 3722 to 4920) and resting heart rate (-4.81%; -3.04; 95% CI, 2.59 to 3.51) during the period of self-isolation compared to the time before lockdown. We found that there was a significant decrease in the number of minutes asleep (-13.48%; -57.91; 95% CI, 16.33 to 99.49) among older adults. Finally, cardiovascular and pre-frailty risk scores were calculated based on biomarkers and evaluated from the clinical perspective.