Effect of concentration and shell thickness on the optical behavior of aqueous CdTe/ZnSe core/shell quantum dots (QDs) exposed to ionizing radiation.

In this work CdTe/ZnSe core/shell quantum dots (QDs) were synthesized via a simple, rapid and room temperature photochemical approach. Optical properties of aqueous prepared CdTe/ZnSe QDs were studied systematically under gamma irradiation with dose range of 0 Gy to 20 kGy. The obtained results showed a regular red shift behavior versus gamma irradiation dose, in photoluminescence peak and absorption edge of the CdTe/ZnSe QDs. Structural properties of CdTe/ZnSe QDs before and after gamma irradiation were characterized by means of X-ray diffraction (XRD), Raman and Fourier-transform infrared (FT-IR) analyses. The obtained results showed that the crystalline structure of CdTe/ZnSe core/shell QDs did not change after gamma irradiation. Concentration and shell thickness as two important factors on the sensitivity of CdTe/ZnSe QDs in front of gamma irradiation have been investigated. Based on this study, CdTe/ZnSe QDs are suggested as good candidates for gamma dosimeter.

A glassy carbon electrode modified with TiO2(200)-rGO hybrid nanosheets for aptamer based impedimetric determination of the prostate specific antigen.

TiO2(200)-rGO hybrid nanosheets were synthesized starting from TiO2, rGO and NaOH solid powders via a scalable hydrothermal process. The weight ratio of TiO2-GO was found to be crucial on the crystal growth and biosensor properties of the final hybrid nanosheets. They were characterized by means of SEM, FESEM-EDX, XRD, XPS, Raman and FTIR spectroscopies in order to verify the formation of very thin TiO2 anatase nanosheets with an orientation of the anatase crystal structure towards the (200) plane. The free active sites of TiO2 structure and the large surface of the 2D graphene structure strongly facilitate charge transport confirmed by BET-BJH analyses. Compared to pure AuNPs, rGO and TiO2, the hybrid nanosheet modified electrode represents the most sensitive aptasensing platform for the determination of PSA. The detection was based on that the variation of electron transfer resistance (Rct) at the modified electrode surface in a solution containing 3.0 mmol L-1 [Fe(CN)6]3-/4- as a redox probe and 0.1 mol L-1 KCl as supporting electrolyte. The detection limit of the sensor is 1 pg mL-1, and the sensor can be operated up to 30 days. It was applied to the analysis of PSA levels in spiked serum samples obtained from patients with prostate cancer. Data compare well with those obtained by an immunoradiometric assay. Graphical abstract Scalable reduced graphene oxide (rGO)-TiO2(200) mesoporous hybrid nanosheets with large surface area and new crystal growth of anatase (A) are introduced as efficient, durable, selective with low detection limit aptamer based prostate specific antigen biosensor.

Artificial Intelligence-Based, Wavelet-Aided Prediction of Long-Term Outdoor Performance of Perovskite Solar Cells.

The commercial development of perovskite solar cells (PSCs) has been significantly delayed by the constraint of performing time-consuming degradation studies under real outdoor conditions. These are necessary steps to determine the device lifetime, an area where PSCs traditionally suffer. In this work, we demonstrate that the outdoor degradation behavior of PSCs can be predicted by employing accelerated indoor stability analyses. The prediction was possible using a swift and accurate pipeline of machine learning algorithms and mathematical decompositions. By training the algorithms with different indoor stability data sets, we can determine the most relevant stress factors, thereby shedding light on the outdoor degradation pathways. Our methodology is not specific to PSCs and can be extended to other PV technologies where degradation and its mechanisms are crucial elements of their widespread adoption.

Effect of annealing temperature on the structural and magnetic properties of Co-doped TiO2 nanoparticles via complex-polymer sol-gel method.

Co-doped TiO2 nanoparticles were synthesized via non hydrous complex-polymer sol-gel method. A series of Co(x):Ti1-x O2 samples with x = 0.01, 0.03, 0.05, 0.08 and 0.10, were prepared and subsequently annealed at 400 degrees, 600 degrees and 800 degrees C. Structural and magnetic properties of Co(x):Ti1-x O2 have been studied by means of X-ray diffraction and DC magnetometry. All samples annealed at 400 degrees C show a paramagnetic behavior with an average grain size of 11 nm. With increasing annealing temperatures a complete crystallization is seen with growth of the cluster size up to 31 nm with clear evidence of a presence of CoTiO3. For all concentrations and annealing conditions no sign of a metallic phase, even at x = 0.10, is seen.

Highly fluorescent CdTe/ZnSe quantum dot-based "turn-off" sensor for the on-site rapid detection of Lead ions in aqueous medium.

Lead (Pb) is a heavy metal known for its adverse effects on both human health and the environment. In recent years, the industrial utilization of Pb2+ has surged, underscoring the imperative need for efficient measurement methods. In this study, a rapid and simple photochemical method was used to synthesize thioglycolic acid (TGA)-stabilized CdTe/ZnSe core-shell quantum dots (QDs). These CdTe/ZnSe QDs emit vibrant green fluorescence and exhibit remarkable quenching in the presence of Pb2+ ions. This property enables the development of an on-site on/off sensor without the necessity of additional modifications. The proposed sensor possesses an outstanding sensitivity to Pb2+, with a detection limit and linear range of 31.8 nM and 50 nM-10 µM, respectively. Importantly, the selectivity of this fluorescence-based sensor was validated by analyzing various positively and negatively charged ions. Furthermore, the developed sensor showed reliable performance against real river, agricultural, and tap water, as confirmed by Inductively Coupled Plasma (ICP) analysis. Additionally, CdTe/ZnSe QDs immobilized on glass slides were successfully employed for on-site water sample analysis, providing a versatile solution for environmental monitoring.