Index for the appropriate vancomycin dosing in premature neonates and infants.

BACKGROUND: In neonates, vancomycin (VCM) is used to treat Gram-positive bacterial infections. However, VCM blood concentrations are affected by gestational age, bodyweight (BW), and renal function. The initial VCM dose adjustment can therefore be difficult, and few reports have evaluated this issue. In this study, we investigated the factors determining the appropriate VCM dosing schedule in neonates, especially premature infants. METHODS: The VCM dosage and trough concentrations were retrospectively investigated from the initial treatment to maintenance therapy in neonatal intensive care unit patients who underwent therapeutic drug monitoring. We examined the average single-administration VCM dosage during maintenance therapy. We then compared the actual VCM dose with that calculated using an index comprising six items that influence the VCM daily dose (postnatal age, gestational age, BW, serum creatinine level, urine output, and lactate level). RESULTS: Twenty premature infants were included. The average BW of patients at the initial VCM administration was 975 g. During maintenance therapy, the average VCM dose was 8.4 mg/kg, and the median trough concentration was 12.4 µg/mL. When we applied the six-item index, 18 of 20 patients (90%) had concordant results between the actual VCM dosing schedule and the VCM calculated using the index. CONCLUSIONS: The average VCM dose and six-item index can facilitate the transition from the initial VCM dose to an appropriate dose in many cases and contribute to early treatment in low-birthweight infants with more variable BW, distribution volumes, and renal function. In conclusion, our six-item index may help standardize VCM administration in premature infants.

Synergistic Antinociceptive Activity of Tramadol/Acetaminophen Combination Mediated by µ-Opioid Receptors.

We investigated whether tramadol could suppress both neuropathic and inflammatory pain in mice at the same dose level. We also examined the effects of drugs metabolized by glucuronidase, such as acetaminophen (ACAP), indomethacin, probenecid, and valproate, on the antinociceptive activity of tramadol. The administration of 5.6 or 10 mg/kg tramadol suppressed cuff-induced mechanical allodynia, but 10 mg/kg tramadol did not suppress complete Freund's adjuvant (CFA)-induced mechanical allodynia. Although neither tramadol (10 mg/kg) nor ACAP (100 mg/kg) alone produced an antinociceptive effect, their combination suppressed CFA-induced mechanical allodynia. Moreover, pretreatment naloxone, an opioid receptor antagonist, significantly attenuated the antinociceptive effects induced by the combination of tramadol and ACAP and slowed gastrointestinal transit. Similar to ACAP, the combination of tramadol and probenecid or valproate, which has the potential to inhibit uridine 5'-diphosphate (UDP)-glucuronosyltransferase (UGT), also suppressed the CFA-induced mechanical allodynia and slowed gastrointestinal transit. We concluded that tramadol was more beneficial for the treatment of neuropathic pain than inflammatory pain. Furthermore, the antinociceptive effects of the tramadol and ACAP combination were mediated by the µ-opioid receptor, and were thought to be related, at least in part, to the accumulation of the active metabolite, M1.

Preparation and Evaluation of Stomatitis Film Using Xyloglucan Containing Loperamide.

Stomatitis induced by radiation therapy or cancer chemotherapy is a factor in sleep disorders and/or eating disorders, markedly decreasing patient quality of life. In recent years, disintegrating oral films that are easy to handle have been developed; therefore, we focused on the formulation of these films. We prepared an adhesive film for the oral cavity using xyloglucan (Xylo), which is a water-soluble macromolecule. We used loperamide, which has been reported to relieve pain caused by stomatitis effectively, as a model drug in this study. Films were prepared from Xylo solutions (3% (w/w)) and hypromellose (HPMC) solutions (1% (w/w)). Xylo and HPMC solutions were mixed at ratios of 1 : 1, 2 : 1, or 3 : 1 for each film, and films 2×2 cm weighing 3 g were prepared and dried at 37°C for 24 h. Physicochemical properties such as strength, adhesiveness, disintegration behavior, and dissolution of loperamide from films were evaluated. Films prepared from Xylo solution alone had sufficient strength and mucosal adhesion. On the other hand, films prepared from a mixture of Xylo and HPMC were inferior to those made from Xylo, but showed sufficient strength and mucosal adhesion and were flexible and easy to handle. The films prepared in this study are useful as adhesion films in the oral cavity.

Development and Characterization of Oral Spray for Stomatitis Containing Irsogladine Maleate.

The stomatitis caused by anticancer agents and radiation therapy deteriorates patient QOL, potentially causing eating disorders as a result of pain. Although gargling and ointments can be used in the treatment of stomatitis, patients must spit out mouthwash after use, while ointment application requires a finger to be inserted into the oral cavity. In contrast, sprays eliminate these potential compliance problems. Therefore, we developed a stomatitis spray that remains on the oral mucosa. It has been reported that irsogladine maleate (IM) is effective against stomatitis via oral administration. IM is water insoluble; thus, it was dissolved with various cyclodextrins (CDs). Furthermore, we examined combination with gum ghatti (GG), a mucoadhesive polymer. The interaction between mucin and GG was examined by Quartz Crystal Microbalance with Dissipation monitoring. We found that GG exhibited mucoadhesion. Furthermore, we examined the healing effects of IM on stomatitis in a stomatitis model hamster. We found that stomatitis healed after direct application of IM. However, the model used in this experiment is not based on stomatitis caused by anticancer agents. Further study is therefore necessary.

[Warfarin effects diminishment by the Clostridium butyricum preparation after cardiac surgery; report of a case].

A 55-year-old gentleman diagnosed with severe aortic insufficiency and annuloaortic ectasia underwent modified Bentall procedure using mechanical valve. Anticoagulation therapy with warfarin was introduced after surgery, but sufficient anticoagulation effect was not achieved with a large amount of dosage. After discontinuing the use of the Clostridium butyricum preparation on postoperative day 29, sufficient anticoagulationt effect was obtained within several days. Clostridium butyricum might change the vitamin K production in the intestinal bacterial flora and attenuated the anticoagulation effect of warfarin.

Low-adhesion and low-swelling hydrogel based on alginate and carbonated water to prevent temporary dilation of wound sites.

Hydrogel-based wound dressings have been developed for rapid wound healing; however, their adhesive properties have not been adequately investigated. Excessive adhesion to the skin causes wound expansion and pain when hydrogels absorb exudates and swell at wound sites. Herein, we developed a low-adhesion and low-swelling hydrogel dressing using alginate, which is non-adhesive to cells and skin tissue, CaCO3, and carbonated water. The alginate/CaCO3 solution rapidly formed a hydrogel upon the addition of carbonated water, and the CO2 in the hydrogel diffused into the atmosphere, preventing acidification and obtaining a pH value suitable for wound healing. Remarkably, the skin adhesion and swelling of the hydrogel were 11.9- to 16.5-fold and 1.9-fold lower, respectively, than those of clinical low-adhesion hydrogel dressings. In vivo wound-healing tests in mice demonstrated its therapeutic efficacy, and the prepared hydrogel prevented temporary wound dilation during early healing. These results illustrate the importance of controlling skin adhesion and swelling in wound dressings and demonstrate the potential clinical applications of this wound-friendly hydrogel dressing.

Physicochemical Properties of Egg-Box-Mediated Hydrogels with Transiently Decreased pH Employing Carbonated Water.

Anionic polysaccharides, including low-methoxy (LM) pectin, are extensively used in biomaterial applications owing to their safety, biocompatibility, and feasibility in constructing supramolecular assemblies by forming egg-box structures with divalent cations. Mixing an LM pectin solution with CaCO3 spontaneously forms a hydrogel. The gelation behavior can be controlled by adding an acidic compound to change the solubility of CaCO3. CO2 is used as the acidic agent and can be easily removed after gelation, thereby reducing the acidity of the final hydrogel. However, CO2 addition has been controlled under varied thermodynamical conditions; therefore, specific CO2 effects on gelation are not necessarily visualized. To evaluate the CO2 impact on the final hydrogel, which would be extended to control hydrogel properties further, we utilized carbonated water to supply CO2 into the gelation mixture without changing its thermodynamic conditions. The addition of the carbonated water accelerated gelation and significantly increased the mechanical strength, promoting cross-linking. However, the CO2 volatilized into the atmosphere, and the final hydrogel became more alkaline than that without the carbonated water, probably because a considerable amount of the carboxy group was consumed for cross-linking. Moreover, when aerogels were prepared from the hydrogels with carbonated water, they exhibited highly ordered networks of elongated porosity in scanning electron microscopy, proposing an intrinsic structural change by CO2 in the carbonated water. We also controlled the pH and strength of the final hydrogels by changing the CO2 amounts in the carbonated water added, thereby validating the significant effect of CO2 on hydrogel properties and the feasibility of using carbonated water.

Preparation and Evaluation of Hydrogel Film Containing Tramadol for Reduction of Peripheral Neuropathic Pain.

To develop and assess new dosage forms for the alternative to existing oral medication for peripheral neuropathy, a hydrogel film in the skin patch formation containing tramadol hydrochloride (TRA), a water-soluble drug used as an analgesic, was prepared and evaluated. A hydrogel film composed of 20%(w/w) hydroxypropyl methylcellulose (HPMC) irradiated with electron beams had high transparency and elasticity similar to commercially available wound dressings and soft tissues, suggesting that it is a suitable substrate for TRA. The inclusion of TRA was enabled by immersing the HPMC hydrogel film in TRA aqueous solution. The release and skin permeation of TRA from TRA-containing hydrogel films differed depending on the electron beam dose. Moreover, the analgesic effects in mice were confirmed in a dose-dependent manner. This study demonstrated the usefulness of a hydrogel film containing TRA as a new dosage form alternative to the existing oral medication for peripheral neuropathy.

Microparticulated Mefenamic Acid with High Dispersion Stability for Pediatric Dosage Form.

Mefenamic acid (MFA), a water-insoluble drug, is used as a suspension in the medical field, but it requires shaking before using to disperse MFA content in the suspension. In previous studies, trials to prepare MFA suspension with high dispersion stability by atomizing MFA by the wet-milling method. However, HPC is used for atomizing MFA. Therefore, the optimum concentration and molecular weight for atomizing MFA have not been investigated. In this study, we investigated the optimum molecular weight and concentration of HPC for the micronization of MFA. As a result, MFA particles became fine particles by adding SDS, and the particle size was also smaller than that of HPC alone. In addition, the suspension with the highest dispersion stability can be obtained when a mixed solution of 1.0% HPC-SL and 0.12% SDS aqueous solution is used. Therefore, this study considers that the addition of SDS and 1.0% HPC-SL aqueous solution are optimal for improving the dispersion stability of the MFA suspension.

Saturated adsorption of lidocaine and coal tar dyes onto porous polytetrafluoroethylene.

Polytetrafluoroethylene (PTFE) has excellent physical properties and has been used in a wide range of applications in various fields. Adsorption research on PTFE is essential as primary research for the further application of PTFE. We attempted to adsorb coal tar dyes and model drugs such as lidocaine onto PTFE as a guideline to search for medicines that adsorb onto PTFE. Saturation curves were obtained after analyzing the adsorption of coal tar dyes on PTFE using the Hanes-Woolf plot. In addition, we collected multiple cases of ATR-FTIR spectral changes and/or retention depending on TPM derivatives and other adsorbates. Lidocaine matched some coal tar dye for the apparent spectral changes between the adsorbed molecules and its crystalline powder. The apparent spectral changes are blue-shifted, suggesting a hydrophobic interaction between the dyes/lidocaine and porous PTFE. This work provides a promising strategy for further application of PTFE.

The Role for miR-146b-5p in the Attenuation of Dermal Fibrosis and Angiogenesis by Targeting PDGFRα in Skin Wounds.

As a candidate microRNA antifibrotic effector in skin wounds, miR-146b-5p was upregulated by basic FGF, and PDGFRα was identified as a direct target of miR-146b-5p in fibroblasts. The treatment of fibroblasts with a miR-146b-5p mimic markedly downregulated the expression of PDGFRα and collagen type I. miR-146b-5p mimic transfection in wounds markedly attenuated cutaneous fibrosis, whereas a miR-146b-5p inhibitor strongly promoted fibrosis, with increases in PDGFRα and collagen I levels. These results indicate the positive effects of miR-146b-5p for the suppression of fibrosis, possibly through the inhibition of PDGFRα. The miR-146b-5p inhibitor markedly increased CD34+ vessel numbers and CD34 expression in wounds. We found miR-146b-5p+ cells in close contact with S100+ adipocytes. Moreover, we discovered the specific colocalization of the exosome marker CD81 and miR-146b-5p in the adipose tissue cells of mimic-transfected wounds, with miR-146b-5p signals being detected in the FSP1+ fibroblastic cells of adipose tissues. Therefore, fibroblastic cells of adipose tissues, which may specifically pick up and contain miR-146b-5p by exosome after transfection, may play an important role in the suppression of fibrosis. In this process, the inhibition of PDGFRα in adipose tissue cells by miR-146b-5p may lead to the loss of their PDGFRα-induced profibrotic activities, thereby suppressing fibrosis.

Evaluation of nephrotoxicity and ototoxicity following amikacin administration once daily or every 48 hours in neonates.

The purpose of this study was to evaluate the effects of once daily (OD) or every 48 hours (every-48-h) administration of amikacin (AMK) on renal function and ototoxicity in neonates. We investigated the frequency of nephrotoxicity and ototoxicity in neonates who received AMK OD or every-48-h from April 2015 to March 2021 and underwent dose evaluation by therapeutic drug monitoring (TDM). In addition, the relationships among birth weight, gestational age, AMK peak and trough values, total duration of AMK administration, and total AMK dose were examined separately for nephrotoxicity and ototoxicity. AMK was administered OD in 38 patients and every-48-h in 62 patients. Nephrotoxicity was observed in 8 patients on OD versus 36 patients on every-48-h administration (P < .001), and ototoxicity was observed in 2 patients on OD versus 12 patients on every-48-h administration (P = .192). For nephrotoxicity, only the trough value was relevant (P = .007). In terms of ototoxicity, there were no influencing factors. The risk of nephrotoxicity was higher with every-48-h AMK administration than with OD AMK administration, with nephrotoxicity depending on the trough value. However, compared with OD, the every-48-h group had lower body weight and possibly poorer original renal function. In addition, ototoxicity did not differ by administration method. Based on these results, every-48-h administration of AMK can be used as safely as OD by performing TDM and preventing high concentrations.

Solubility Enhancement of Ibuprofen by Adsorption onto Spherical Porous Calcium Silicate.

The solubility of a drug is higher when it is in an amorphous form than when it is in a crystalline form. To enhance the solubility of ibuprofen (IBU), a poorly water-soluble drug, we attempted to adsorb IBU onto spherical porous calcium silicate (Florite® PS300, PS300) in two ways: the evaporation (EV) and sealed heating (SH) methods. The crystallinity of the samples was evaluated using powder X-ray diffraction analysis (PXRD) and differential scanning calorimetry (DSC). The molecular interaction between IBU and PS300 was evaluated with FTIR. In addition, the dissolution behavior of IBU in the samples was assessed by the dissolution test. Based on the results of the PXRD and DSC measurements, both methods allowed adsorption of IBU onto PS300, and IBU was amorphized. Based on the FTIR observations, in the SH or EV mixtures containing 10% and 30% IBU, respectively, it seemed that the IBU molecules intermolecularly interacted with calcium molecules as the main component of PS300. Improvement in the solubility of IBU was observed with both methods; however, the dissolution rate of IBU from samples prepared via SH was higher than that from EV, or of IBU crystals. Collectively, our findings indicate that the petal-like structure of PS300, which has a spherical shape and good flowability, is an effective tool for adsorbing IBU onto PS300 via SH.

Preparation and Evaluation of a Powdered Rebamipide Mouthwash as In-Hospital Formulation: Considering Dispersion before Use in Patients.

In Japan, rebamipide (RB) mouthwash (RB-MW) for oral mucositis induced by cancer chemotherapy has been prepared using in-hospital formulation. Usually, RB-MW is prepared by dispersing crushed commercial RB tablets in the dispersion medium; however, uniformity is difficult to obtain due to low solubility. The current study aims is to prepare homogenously dispersed formulations using the fine particles of crushed tablets by a method that is convenient for hospital use. Commercial RB tablets were pre-milled at different milling times as "RB-Ts". A ground mixture was then prepared by co-grinding the RB-Ts with HPC-L or PVP K30 via a benchtop ball milling machine (MM400). The physicochemical properties of samples were evaluated for PXRD, FTIR, turbidity, particle size, and solubility. Although the milling of RB tablets decreased the crystallinity, the length of milling time did not affect them. In contrast, grinding using MM400 significantly decreased RB crystallinity; their PXRD patterns showed a halo, suggesting the amorphization of RB crystals by grinding. Although solubility and turbidity seemed to be affected by the type of polymer rather than the particle size, every ground mixture showed high dispersibility. Thus, grinding the RB-Ts with polymers appeared to be the most promising way to obtain stable dispersion as an in-hospital formulation.

Testing a Benchtop Wet-Milling Method for Preparing Nanoparticles and Suspensions as Hospital Formulations.

In clinical practice, for elderly or pediatric patients who have difficulty swallowing, solid dosage forms such as tablets or capsules are crushed or unsealed, prepared as powder forms, and often administered as suspensions. However, because their dispersibility is poor, aggregation or precipitation occurs readily. Once precipitation and deposition happen, redispersion is difficult, which can limit patient and caretaker drug adherence. In this study, we attempted to prepare nanoparticles as a hospital formulation by a benchtop wet-milling method to obtain a suspension with high dispersibility. This is the first study to apply the wet-milling method to prepare the hospital formulation. We chose cefditoren pivoxil (CDTR-PI) as an experimental active pharmaceutical ingredient. CDTR-PI crystals were physically mixed with various water-soluble polymers such as polyvinylpyrrolidone, polyethylene oxide, hydroxypropyl cellulose, or hypromellose and wet-milled with a surface-active agent (sodium lauryl sulfate) under different conditions. The mean particle diameter of most of the samples was less than 200 nm. In FTIR spectra of ground samples, peak shifts suggesting inter- or intramolecular interactions between CDTR-PI and the other additive agents were not observed. Besides, the nanoparticle suspension had favorable dispersibility, as determined using a dispersion stability analyzer. Providing a suspension with high dispersibility makes dispense with the resuspension, the patient's medication adherence would improve. These results show that suspended liquid formulations of active pharmaceutical ingredients could be obtained by the simple wet-milling method as hospital formulations.

Wound Healing Promotion by Hyaluronic Acid: Effect of Molecular Weight on Gene Expression and In Vivo Wound Closure.

Hyaluronic acid (HA) has been known to play an important role in wound healing process. However, the effect of molecular weight (MW) of exogenously administered HA on the wound healing process has not been fully understood. In this study, we investigated HA with different MWs on wound healing process using human epidermal keratinocytes and dermal fibroblasts. Cell proliferation and migration ability were assessed by water soluble tetrazolium (WST) assay and wound scratch assay. We examined the effect of HA addition in a full-thickness wound model in mice and the gene expression related to wound healing. Proliferation and migration of HaCaT cells increased with the increase of MW and concentration of HA. Interleukin (IL-1ß), IL-8 and vascular endothelial growth factor (VEGF) as well as matrix metalloproteinase (MMP)-9 and MMP-13 were significantly upregulated by high molecular weight (HMW) HA in keratinocytes. Together with VEGF upregulation and the observed promotion of HaCaT migration, HA with the MW of 2290 kDa may hold potential to improve re-epithelialization, a critical obstacle to heal chronic wounds.

A novel hydrogel sheet prevents postoperative pancreatic fistula in a rat model.

AIM: To evaluate the efficacy of a novel hydrogel sheet in preventing postoperative pancreatic fistula (POPF). BACKGROUND: Postoperative pancreatic fistula is a life-threatening complication. As no study has reported the use of hydrogel sheets in preventing POPF, their effectiveness for that purpose remains unclear. METHODS: A novel hydrogel sheet made of polyvinyl alcohol (PVA) was prepared by the freeze-thaw method. The pancreatic ducts and surrounding pancreatic parenchyma of rats were transected to induce a pancreatic fistula. Next, the sheet was attached to the transection site. Ascitic fluid amylase and lipase concentrations were measured. Neoveil® , a nonwoven polyglycolic acid (PGA) felt, is already clinically used as an absorbable reinforcing material at pancreatic transection sites. Neoveil® was used for comparison, as was VIEWGEL® , which is marketed as a wound dressing. RESULTS: The hydrogel sheet remained in place 48 hours postoperatively. The ascitic amylase concentrations in the control, VIEWGEL® -treated, Neoveil® -treated, and hydrogel-treated rats, respectively, were 4992.4 ± 5355.7, 1068.4 ± 269.1, 730.2 ± 425.2, and 303.1 ± 240.1 IU/L; the ascitic lipase concentrations were 2279.8 ± 3395.2, 169.5 ± 100.6, 90.4 ± 71.0, and 86.8 ± 59.8 IU/L. The ascitic amylase and lipase levels were significantly lower in the hydrogel group than in the other groups (P < .05). CONCLUSIONS: This novel hydrogel sheet effectively prevents pancreatic fistulas and has promising clinical application potential.

[Preparation of orally disintegrating tablets for masking of unpleasant taste: comparison with corrective-adding methods].

Many orally disintegrating tablets have recently been developed to improve oral ingestion and usability and are widely administered clinically, resulting in improved quality of life for patients. Since orally disintegrating tablets rapidly disintegrate in the mouth, the masking of unpleasant taste is important. We investigated the masking of the taste of furosemide (FU) as a model drug with correctives and prepared orally disintegrating tablets. Using maltitol (MA) as a corrective, granules were prepared employing mixing, coating, and mixing/coating methods using a desktop granulator. Each preparation was subjected to tasting. The taste was masked well when granules were prepared by the mixing and mixing/coating methods. Tablets were prepared from these granules with mannitol and crystalline cellulose added as fillers. Tablets made from granules prepared by the mixing and mixing/coating methods showed appropriate strength and disintegrated rapidly. When the amount of MA was increased in the mixing method, the disintegration time was prolonged, and thus the amount should be determined considering both taste masking and disintegration property. The results showed that orally disintegrating tablets of insoluble drugs with an unpleasant taste such as FU should be prepared with the taste masked employing the methods used in this study.

Preparation of orally disintegrating tablets with taste-masking function: masking effect in granules prepared with correctives using the dry granulation method and evaluation of tablets prepared using the taste-masked granules.

We investigated several methods of taste masking in the preparation of orally disintegrating tablets (ODTs), using furosemide (FU) as a model drug. Four types of FU preparations were prepared: granules with maltitol (MA), granules with yogurt powder (YO), a physical mixture of FU and MA, and a physical mixture of FU and YO. All taste-masking granules were prepared using the dry granulation method. The taste of each type of preparation was evaluated. All four preparations markedly improved the taste of the FU tablets, but the mixing ratios of the correctives did not affect the masking effect. No difference in masking effect was found between MA and YO in the physical mixtures, but the masking effect in the granules with YO was superior to that of the granules with MA. Taste-masked FU tablets were prepared using the direct compression method; crystalline cellulose (Avicel PH-302) and mannitol were added as excipients at the mixing ratio of 1/1. All four types of tablets displayed sufficient hardness, but MA-containing tablets were harder than YO-containing tablets. The hardness of the tablets prepared from YO granules increased as the YO content increased. The most rapidly disintegrating tablets were those of YO granules prepared at a mixing ratio of FU/YO=1/1, which disintegrated within 20 s, followed by the tablets of MA granules prepared at a mixing ratio of FU/MA=1/1. The disintegration times of the tablets made from physical mixtures, in contrast, were longer than 200 s. Disintegration time lengthened as the mixing ratio of YO or MA increased. The hardness and disintegration time of these tablets could be controlled by varying the compression pressure. We found that YO is more useful than MA in masking unpleasant tastes and confirmed that orally disintegrating tablets with taste-masking function can be prepared using granules of YO prepared using the dry granulation method as a new corrective.

[Preparation and evaluation of taste masked orally disintegrating tablets with granules made by the wet granulation method].

Using furosemide (FU) as a model drug, we examined the wet granulation method as a way to improve the taste masking and physical characteristics of orally disintegrating tablets (ODTs). In the wet granulation method, yogurt powder (YO) was used as a corrective and maltitol (MA) was used as a binding agent. The taste masked FU tablets were prepared using the direct compression method. Microcrystalline cellulose (Avicel® PH-302) and mannitol were added as excipients at a mixing ratio of 1/1 by weight. Based on the results of sensory test on taste, the prepared granules markedly improved the taste of FU, and a sufficient masking effect was obtained at the YO/FU ratio of 1 or more. Furthermore, it was found that the masking effect achieved by YO granules made with the wet granulation method was similar to or better than that produced by the granules made with dry granulation method. All types of tablets displayed sufficient hardness (over 3.5×10(-2) kN), and rapidly disintegrating tablets were obtained with YO granules produced at a mixing ratio of FU/YO=1/1, which disintegrated within 20 s. Disintegration time lengthened as the mixing ratio of YO to FU increased. In the mixing ratio of FU/YO=1/1, the hardness of tablets with granules made by the wet granulation method exceeded that of tablets with granules made by the dry granulation method, with minimal differences in disintegration time. The hardness and disintegration time of the tablets with granules made by the wet granulation method could be controlled by varying the compression force. In conclusion, YO was found to be a useful additive for masking unpleasant tastes. FU ODTs with improved taste, rapid disintegration and greater hardness could be prepared with YO-containing granules made by the wet granulation method using MA as a binding agent.