Part-crystalline part-liquid state and rattling-like thermal damping in materials with chemical-bond hierarchy.

Understanding thermal and phonon transport in solids has been of great importance in many disciplines such as thermoelectric materials, which usually requires an extremely low lattice thermal conductivity (LTC). By analyzing the finite-temperature structural and vibrational characteristics of typical thermoelectric compounds such as filled skutterudites and Cu3SbSe3, we demonstrate a concept of part-crystalline part-liquid state in the compounds with chemical-bond hierarchy, in which certain constituent species weakly bond to other part of the crystal. Such a material could intrinsically manifest the coexistence of rigid crystalline sublattices and other fluctuating noncrystalline sublattices with thermally induced large-amplitude vibrations and even flow of the group of species atoms, leading to atomic-level heterogeneity, mixed part-crystalline part-liquid structure, and thus rattling-like thermal damping due to the collective soft-mode vibrations similar to the Boson peak in amorphous materials. The observed abnormal LTC close to the amorphous limit in these materials can only be described by an effective approach that approximately treats the rattling-like damping as a "resonant" phonon scattering.

Structure family and polymorphous phase transition in the compounds with soft sublattice: Cu2Se as an example.

Quite a few interesting but controversial phenomena, such as simple chemical composition but complex structures, well-defined high-temperature cubic structure but intriguing phase transition, coexist in Cu2Se, originating from the relatively rigid Se framework and "soft" Cu sublattice. However, the electrical transport properties are almost uninfluenced by such complex substructures, which make Cu2Se a promising high-performance thermoelectric compound with extremely low thermal conductivity and good power factor. Our work reveals that the crystal structure of Cu2Se at the temperature below the phase-transition point (∼400 K) should have a group of candidate structures that all contain a Se-dominated face-centered-cubic-like layered framework but nearly random site occupancy of atoms from the "soft" Cu sublattice. The energy differences among those structures are very low, implying the coexistence of various structures and thus an intrinsic structure complexity with a Se-based framework. Detailed analyses indicate that observed structures should be a random stacking of those representative structure units. The transition energy barriers between each two of those structures are estimated to be zero, leading to a polymorphous phase transition of Cu2Se at increasing temperature. Those are all consistent with experimental observations.

A Critical Review of Machine Learning Techniques on Thermoelectric Materials.

Thermoelectric (TE) materials can directly convert heat to electricity and vice versa and have broad application potential for solid-state power generation and refrigeration. Over the past few decades, efforts have been made to develop new TE materials with high performance. However, traditional experiments and simulations are expensive and time-consuming, limiting the development of new materials. Machine learning (ML) has been increasingly applied to study TE materials in recent years. This paper reviews the recent progress in ML-based TE material research. The application of ML in predicting and optimizing the properties of TE materials, including electrical and thermal transport properties and optimization of functional materials with targeted TE properties, is reviewed. Finally, future research directions are discussed.

Melting and dissociation of ammonia at high pressure and high temperature.

Raman spectroscopy and synchrotron x-ray diffraction measurements of ammonia (NH(3)) in laser-heated diamond anvil cells, at pressures up to 60 GPa and temperatures up to 2500 K, reveal that the melting line exhibits a maximum near 37 GPa and intermolecular proton fluctuations substantially increase in the fluid with pressure. We find that NH(3) is chemically unstable at high pressures, partially dissociating into N(2) and H(2). Ab initio calculations performed in this work show that this process is thermodynamically driven. The chemical reactivity dramatically increases at high temperature (in the fluid phase at T > 1700 K) almost independent of pressure. Quenched from these high temperature conditions, NH(3) exhibits structural differences from known solid phases. We argue that chemical reactivity of NH(3) competes with the theoretically predicted dynamic dissociation and ionization.

Anomalous lattice dynamics near the ferroelectric instability in PbTe.

A recent report of highly unusual ferroelectric fluctuations in PbTe by E. S. Bozin et al. [Science 330, 1660 (2010)] raises fundamental questions about the nature of underlying lattice dynamics. We show by first-principles calculations that the reported results can be attributed to abnormally large-amplitude thermal vibrations that stem from a delicate competition of dual ionicity and covalency, which puts PbTe near ferroelectric instability. It produces anomalous properties such as partially localized low-frequency phonon modes, a soft transverse optical phonon mode, and a positive temperature coefficient for the band gap. These results account for experimental findings and resolve the underlying atomistic mechanisms, which have broad implications for materials near dynamic instabilities.

Nanodopant-induced band modulation in AgPb(m)SbTe(2+m)-type thermoelectrics.

The structure-property relation is a key outstanding problem in the study of nanocomposite materials. Here we elucidate the fundamental physics of nanodopants in thermoelectric nanocomposites XPb(m)YTe(2+m) (X = Ag, Na; Y = Sb, Bi). First-principles calculations unveil a sizable band-gap widening driven by nanodopant-induced lattice strain and a band split-off mainly caused by the spin-orbit interaction in nanodopant. Boltzmann transport calculations on PbTe with modified band mimicking nanodopant-induced modulations show significant but competing effects on high-temperature electron transport behavior. These results offer insights for understanding experimental findings and optimizing thermoelectric properties of narrow band-gap semiconductor nanocomposites.

First-principles study of pressure-induced phase transitions, mechanical and thermodynamic properties of ThBC.

First-principles calculations and particle swarm optimization algorithm are combined to predict the crystal structures in the pressure range from 0 to 100 GPa. Four phases of ThBC are determined, including theP4122,Cmcm,CmceandImmmphases, in which theCmcm,CmceandImmmphases are newly predicted structures. The mechanical, electronic and thermodynamic properties of the four phases are investigated. According to the enthalpy-pressure and volume-pressure curves, the phase transition pressure from theP4122 phase to theCmcmphase is 15 GPa, theCmcmto theCmceis 36 GPa and theCmceto theImmmis 69 GPa. All the transitions belong to the first-order phase transition. Based on the calculated elastic constants, theP4122,Cmcm,CmceandImmmphases exhibit brittle nature. The Young's moduli show that theP4122 phase has the largest degree of anisotropy, and theImmmphase has the smallest. The calculated density of states reveal that theP4122,Cmcm,CmceandImmmphases are all metallic.

Microstructure and a nucleation mechanism for nanoprecipitates in PbTe-AgSbTe2.

Many recent advances in thermoelectric (TE) materials are attributed to their nanoscale constituents. Determination of the nanocomposite structures has represented a major experimental and computational challenge and eluded previous attempts. Here we present the first atomically resolved structures of high performance TE material PbTe-AgSbTe2 by transmission electron microscopy imaging and density functional theory calculations. The results establish an accurate structural characterization for PbTe-AgSbTe2 and identify the interplay of electric dipolar interactions and strain fields as the driving mechanism for nanoprecipitate nucleation and aggregation.

The origin of intrinsic charge transport for Dirac carbon sheet materials: roles of acetylenic linkage and electron-phonon couplings.

Within the past few years, intriguing graphene Dirac cones have attracted intense interest in novel two-dimensional (2D) Dirac materials as ultrahigh-mobility functional materials. In this work, the phonon-limited charge transport properties of α-graphyne (α-GY), α-graphdiyne (α-GDY), and ß-graphyne (ß-GY) were investigated using the Boltzmann transport equation within the first-principles framework while considering the electron-phonon coupling (EPC). Despite all three investigated compounds being 2D Dirac carbon materials, each demonstrated distinctly different carrier mobilities by one order of magnitude (2.2 × 104 cm2 V-1 s-1 for α-GY, 2.1 × 103 cm2 V-1 s-1 for α-GDY and 1.9 × 103 cm2 V-1 s-1 for ß-GY at room-temperature and a carrier connection of n ∼ 3 × 1012 cm-2). The essential differences in the mobilities of these materials originated from the acetylenic linkage limiting the group velocity and the E2g phonon modes limiting the scattering time. For example, a few uniformly equivalent acetylenic linkages and E2g phonon modes tend to generate high mobilities. A simple mobility relationship was determined using the number of E2g photon modes, allowing for a quick estimation of the mobilities for Dirac materials. α-GY was identified as a promising alternative to graphene for next generation nanoelectronic devices.

Pressure-induced structural transformations and polymerization in ThC2.

Thorium-carbon systems have been thought as promising nuclear fuel for Generation IV reactors which require high-burnup and safe nuclear fuel. Existing knowledge on thorium carbides under extreme condition remains insufficient and some is controversial due to limited studies. Here we systematically predict all stable structures of thorium dicarbide (ThC2) under the pressure ranging from ambient to 300 GPa by merging ab initio total energy calculations and unbiased structure searching method, which are in sequence of C2/c, C2/m, Cmmm, Immm and P6/mmm phases. Among these phases, the C2/m is successfully observed for the first time via in situ synchrotron XRD measurements, which exhibits an excellent structural correspondence to our theoretical predictions. The transition sequence and the critical pressures are predicted. The calculated results also reveal the polymerization behaviors of the carbon atoms and the corresponding characteristic C-C bonding under various pressures. Our work provides key information on the fundamental material behavior and insights into the underlying mechanisms that lay the foundation for further exploration and application of ThC2.

Structural Phase Transition of ThC Under High Pressure.

Thorium monocarbide (ThC) as a potential fuel for next generation nuclear reactor has been subjected to its structural stability investigation under high pressure, and so far no one reported the observation of structure phase transition induced by pressure. Here, utilizing the synchrotron X-ray diffraction technique, we for the first time, experimentally revealed the phase transition of ThC from B1 to P4/nmm at pressure of ~58 GPa at ambient temperature. A volume collapse of 10.2% was estimated during the phase transition. A modulus of 147 GPa for ThC at ambient pressure was obtained and the stoichiometry was attributed to the discrepancy of this value to the previous reports.

Diverse lattice dynamics in ternary Cu-Sb-Se compounds.

Searching and designing materials with extremely low lattice thermal conductivity (LTC) has attracted considerable attention in material sciences. Here we systematically demonstrate the diverse lattice dynamics of the ternary Cu-Sb-Se compounds due to the different chemical-bond environments. For Cu3SbSe4 and CuSbSe2, the chemical bond strength is nearly equally distributed in crystalline bulk, and all the atoms are constrained to be around their equilibrium positions. Their thermal transport behaviors are well interpreted by the perturbative phonon-phonon interactions. While for Cu3SbSe3 with obvious chemical-bond hierarchy, one type of atoms is weakly bonded with surrounding atoms, which leads the structure to the part-crystalline state. The part-crystalline state makes a great contribution to the reduction of thermal conductivity that can only be effectively described by including a rattling-like scattering process in addition to the perturbative method. Current results may inspire new approaches to designing materials with low lattice thermal conductivities for high-performance thermoelectric conversion and thermal barrier coatings.

Dehydrogenation reaction for Na-O-H system: a first-principles study.

The crystal structures, electronic, dielectric, and vibrational properties of NaH, Na(2)O and NaOH are systematically investigated by first-principles calculations and the quasiharmonic approximation. The phonon dispersion relations and the phonon density of states of the phases and their thermodynamic functions including the heat capacity, the vibrational enthalpy, and the vibrational entropy are calculated using a direct force-constant method. Based on these results, the dehydrogenation reaction, NaH+NaOH-->H(2)+Na(2)O, is predicted to take place at 528 K, which is in agreement with the experimental observed value.

Phonon density of states of metallic Sn at high pressure.

Determination of the lattice dynamics of Sn at high pressure has represented a major experimental challenge and eluded previous attempts. Here we report the first successful measurement of the phonon density of states of Sn at high pressure to 64 GPa using nuclear resonant inelastic x-ray scattering. We also present density functional theory calculations that are in excellent agreement with the measured data. The results of this combined experimental and theoretical study establish reliable phonon density of states of Sn at high pressure. It makes possible an accurate description of its thermodynamic properties that are of great importance and interest in high pressure research.