Water Splitting Induced by Visible Light at a Copper-Based Single-Molecule Junction.

Water splitting is an essential process for converting light energy into easily storable energy in the form of hydrogen. As environmentally preferable catalysts, Cu-based materials have attracted attention as water-splitting catalysts. To enhance the efficiency of water splitting, a reaction process should be developed. Single-molecule junctions (SMJs) are attractive structures for developing these reactions because the molecule electronic state is significantly modulated, and characteristic electromagnetic effects can be expected. Here, water splitting is induced at Cu-based SMJ and the produced hydrogen is characterized at a single-molecule scale by employing electron transport measurements. After visible light irradiation, the conductance states originate from Cu/hydrogen molecule/Cu junctions, while before irradiation, only Cu/water molecule/Cu junctions were observed. The vibration spectra obtained from inelastic electron tunneling spectroscopy combined with the first-principles calculations reveal that the water molecule trapped between the Cu electrodes is decomposed and that hydrogen is produced. Time-dependent and wavelength-dependent measurements show that localized-surface plasmon decomposes the water molecule in the vicinity of the junction. These findings indicate the potential ability of Cu-based materials for photocatalysis.

Anomalous spin relaxation in graphene nanostructures on the high temperature annealed surface of hydrogenated diamond nanoparticles.

The electronic and magnetic structures of diamond nanoparticles with a hydrogenated surface are investigated as a function of annealing temperature under vacuum annealing up to 800-1000 °C. Near edge X-ray absorption fine structure (NEXAFS) spectra together with elemental analysis show successive creation of defect-induced nonbonding surface states at the expense of surface-hydrogen atoms as the annealing temperature is increased above 800 °C. Magnetization and ESR spectra confirm the increase in the concentration of localized spins assigned to the nonbonding surface states upon the increase of the annealing temperature. Around 800 °C, surface defects collectively created upon the annealing result in the formation of graphene nano-islands which possess magnetic nonbonding edge states of π-electron origin. Interestingly, extremely slow spin relaxation is observed in the magnetization of the edge state spins at low temperatures. The relaxation time is well explained in terms of a lognormal distribution of magnetic anisotropy energies instead of the classical Néel relaxation mechanism with a unique magnetic anisotropy energy, in addition to the contribution of the quantum mechanical tunnelling mechanism. The spin-orbit interaction enhanced by the electrostatic potential gradient created at the interface between the core diamond particle and surface graphene nano-islands is responsible for the slow spin relaxation.

Structure and Electron Transport at Metal Atomic Junctions Doped with Dichloroethylene.

The front cover artwork was provided by the group of Prof. Nishino, Tokyo Institute of Technology. The image depicts the investigation of the structure and electron transport of the Au, Ag, Cu, Ni, Fe, and Pd atomic junctions doped with dichloroethylene. Read the full text of the Article at 10.1002/cphc.201900988.

Structure and Electron Transport at Metal Atomic Junctions Doped with Dichloroethylene.

We have investigated the structure and electron transport at dichloroethylene-doped metal atomic junctions at low temperatures (20 K) in ultra-high vacuum, using Fe, Ni, Pd, Cu, Ag, and Au. The metal atomic junctions were fabricated using the mechanically controllable break junction technique. After introducing the dichloroethylene (DCE), the conductance behavior of Fe, Ni, and Pd junctions was considerably changed, whereas little change was observed for Cu, Ag, and Au. For the Pd and Cu junctions, a clear peak was observed in their conductance histograms, showing that the single-molecule junction was selectively formed. To investigate the structure of the metal atomic junctions further, their plateau lengths were analyzed. The length analysis revealed that the Au atomic wire was elongated, and the metal atomic wires were formed for the other transition metals: those that do not normally form metal atomic wires without DCE doping, as DCE adsorption stabilized the metal atomic states. There is a strong interaction between DCE and the metals, where DCE supports the formation of the metal atomic wire for Fe, Ni, and Pd.

Single-Molecule Junction of a Cationic Rh(III) Polyyne Molecular Wire.

Single-molecule conductance studies on metal-containing inorganic and organometallic molecular wires are relatively less explored compared to those on organic molecular wires. Furthermore, conductance and transmission profiles of the metal-containing wires insensitive to the metal centers often hinder rational design for high performance wires. Here, synthesis and single-molecule conductance measurements of the bis(butadiynyl)rhodium wires with tetracarbene ligands 1H and 1Au are reported as rare examples for Rh(III) diacetylide molecular wires. The rhodium wires derived from the terminal acetylene and gold-functionalized precursors show comparable, high single-molecule conductance ((6-7) × 10-3 G0) as determined by the STM break-junction measurements, suggesting formation of virtually the same covalently linked metal electrode-molecule-metal electrode junctions. The values for the metallapolyynes are larger than those of the organic polyyne wires having the similar molecular lengths. The hybrid DFT-NEGF calculations of the model systems suggest that profiles of transmission spectra are highly sensitive to the presence and species of the metal fragments doped into the polyyne molecular wire because the conductance orbitals of the metallapolyynes molecular junctions carry significant metal fragment characters. Thus, the metallapolyyne junctions turn out to be suitable platforms for rationally designed molecular wires.

Selective formation of molecular junctions with high and low conductance states by tuning the velocity of electrode displacement.

A single-molecule junction of 1,4-di(4-pyridyl)benzene (DPB) was prepared in a nano-gap between two Au electrodes using the scanning tunnelling microscopy-based break junction method (STM-BJ). Electric conductance and current versus bias voltage (I-V) measurements during the pulling and pushing processes of DPB single-molecule junctions revealed that high (H) and low (L) conductance states formed in both the pulling and pushing processes. Analysis of the I-V curves based on a single-level model indicated that the difference in conductivity of the H and L states mainly arises from high and low metal-molecule electric coupling in the junction. We demonstrated the controllable formation of H and L conductance states by simply tuning the velocity of electrode displacement in the pushing process. In the pulling process, both H and L states formed regardless of the velocity (v) of electrode displacement, while in the pushing process, H and L states could be selectively fabricated by using low (v = 16 nm s-1) and high (v = 64 nm s-1) velocities of displacement, respectively. This study provides a simple approach to selectively fabricate high and low conductance states by fine tuning of the electrode displacement.

Electric-Field-Controllable Conductance Switching of an Overcrowded Ethylene Self-Assembled Monolayer.

Molecular isomerism has been discussed from the viewpoint of the tiniest switch and memory elements in electronics. Here, we report an overcrowded ethylene-based molecular conductance switch, which fulfills all the essential requirements for implementation into electronic devices, namely, electric-field-controllable reversible conductance change with a molecular-level spatial resolution, robust conformational bistability under ambient conditions, and ordered monolayer formation on electrode surfaces. The conformational state of this overcrowded ethylene, represented by a folded or twisted conformer, is susceptible to external environments. Nanoscopic measurements using scanning tunneling microscopy techniques, together with theoretical simulations, revealed the electronic properties of each conformer adsorbed on Au(111). While the twisted conformer prevails in the molecularly dispersed state, upon self-assembly into a monolayer, a two-dimensional network structure of the folded conformer is preferentially formed due to particular intermolecular interaction. In the monolayer state, folded-to-twisted and its reverse isomerization can be controlled by the modulation of electric fields.

Triptycene Tripods for the Formation of Highly Uniform and Densely Packed Self-Assembled Monolayers with Controlled Molecular Orientation.

When employing self-assembled monolayers (SAMs) for tuning surface and interface properties, organic molecules that enable strong binding to the substrate, large-area structural uniformity, precise alignment of functional groups, and control of their density are highly desirable. To achieve these goals, tripod systems bearing multiple bonding sites have been developed as an alternative to conventional monodentate systems. Bonding of all three sites has, however, hardly been achieved, with the consequence that structural uniformity and orientational order in tripodal SAMs are usually quite poor. To overcome that problem, we designed 1,8,13-trimercaptomethyltriptycene (T1) and 1,8,13-trimercaptotriptycene (T2) as potential tripodal SAM precursors and investigated their adsorption behavior on Au(111) combining several advanced experimental techniques and state-of-the-art theoretical simulations. Both SAMs adopt dense, nested hexagonal structures but differ in their adsorption configurations and structural uniformity. While the T2-based SAM exhibits a low degree of order and noticeable deviation from the desired tripodal anchoring, all three anchoring groups of T1 are equally bonded to the surface as thiolates, resulting in an almost upright orientation of the benzene rings and large-area structural uniformity. These superior properties are attributed to the effect of conformationally flexible methylene linkers at the anchoring groups, absent in the case of T2. Both SAMs display interesting electronic properties, and, bearing in mind that the triptycene framework can be functionalized by tail groups in various positions and with high degree of alignment, especially T1 appears as an ideal docking platform for complex and highly functional molecular films.

Tuneable single-molecule electronic conductance of C60 by encapsulation.

It has been demonstrated that the single-molecule transport properties of fullerene C60 can be modulated by encapsulating endohedral species, i.e. Li+ and H2O, which exhibit different degrees of van der Waals interactions with the C60 cage. Single-molecule junctions were prepared between the gaps of Au electrodes using a break junction technique. Encapsulation of H2O inside the cage caused a slight decrease in the electronic conductivity relative to that of pristine C60. This is in sharp contrast to Li+ encapsulation, which results in a twofold-to-fourfold increase in the conductivity. The electronic couplings between the C60 cage and the Au electrodes were weakly dependent on the endohedral species in the cage, though the molecular orbital energy levels were remarkably modulated upon encapsulation.

Highly Reproducible Formation of a Polymer Single-Molecule Junction for a Well-Defined Current Signal.

Single-molecule devices attract much interest in the development of nanoscale electronics. Although a variety of functional single molecules for single-molecule electronics have been developed, there still remains the need to implement sophisticated functionalization toward practical applications. Given its superior functionality encountered in macroscopic materials, a polymer could be a useful building block in the single-molecule devices. Therefore, a molecular junction composed of polymer has now been created. Furthermore, an automated algorithm was developed to quantitatively analyze the tunneling current through the junction. Quantitative analysis revealed that the polymer junction exhibits a higher formation probability and longer lifetime than its monomer counterpart. These results suggest that the polymer provides a unique opportunity to design both stable and highly functional molecular devices for nanoelectronics.

Fluctuation in Interface and Electronic Structure of Single-Molecule Junctions Investigated by Current versus Bias Voltage Characteristics.

Structural and electronic detail at the metal-molecule interface has a significant impact on the charge transport across the molecular junctions, but its precise understanding and control still remain elusive. On the single-molecule scale, the metal-molecule interface structures and relevant charge transport properties are subject to fluctuation, which contain the fundamental science of single-molecule transport and implication for manipulability of the transport properties in electronic devices. Here, we present a comprehensive approach to investigate the fluctuation in the metal-molecule interface in single-molecule junctions, based on current-voltage ( I- V) measurements in combination with first-principles simulation. Contrary to conventional molecular conductance studies, this I- V approach provides a correlated statistical description of both the degree of electronic coupling across the metal-molecule interface and the molecular orbital energy level. This statistical approach was employed to study fluctuation in single-molecule junctions of 1,4-butanediamine (DAB), pyrazine (PY), 4,4'-bipyridine (BPY), and fullerene (C60). We demonstrate that molecular-dependent fluctuation of σ-, π-, and π-plane-type interfaces can be captured by analyzing the molecular orbital (MO) energy level under mechanical perturbation. While the MO level of DAB with the σ-type interface shows weak distance dependence and fluctuation, the MO level of PY, BPY, and C60 features unique distance dependence and molecular-dependent fluctuation against the mechanical perturbation. The MO level of PY and BPY with the σ+π-type interface increases with the increase in the stretch distance. In contrast, the MO level of C60 with the π-plane-type interface decreases with the increase in the stretching perturbation. This study provides an approach to resolve the structural and electronic fluctuation in the single-molecule junctions and insight into the molecular-dependent fluctuation in the junctions.

"Doping" of Polyyne with an Organometallic Fragment Leads to Highly Conductive Metallapolyyne Molecular Wire.

Exploration of highly conductive molecules is essential to achieve single-molecule electronic devices. The present paper describes the results on single-molecule conductance study of polyyne wires doped with the organometallic Ru(dppe)2 fragment, X-(C≡C) n-Ru(dppe)2-(C≡C) n-X. The metallapolyyne wires end-capped with the gold fragments (X = AuL) are subjected to single-molecule conductance measurements with the STM break junction technique, which reveal the high conductance (10-3-10-2 G0; n = 2-4) with the low attenuation factor (0.25 Å-1) and the low contact resistance (33 kΩ). A unique "'doping'" effect of Ru(dppe)2 fragment was found to lead to the high performance as suggested by the hybrid density functional theory-nonequilibrium green function calculation.

Studies on single-molecule bridging metal electrodes: development of new characterization technique and functionalities.

A single molecular junction is a nanoscale structure prepared by bridging a single molecule between macroscopic metal electrodes. It has attracted significant attention due to its unique structure and potential applications in ultra-small single molecular electronic devices. It has two metal-molecule interfaces, and thus the electronic structure of the molecule can be significantly modulated from its original one. The single molecular junction can be regarded as a new material that includes metal electrodes, a so-called "double interface material". Therefore, we can expect unconventional physical and chemical properties. To develop a better understanding of the properties and functionalities of single molecular junctions, their atomic and electronic structures should be characterized. In this review, we describe the development of these characterization techniques, such as inelastic electron tunneling spectroscopy, surface-enhanced Raman scattering, as well as shot noise and thermopower measurements. We have also described some unique properties and functionalities of single molecular junctions, such as switching and diode properties.

Triphosphasumanene Trisulfide: High Out-of-Plane Anisotropy and Janus-Type π-Surfaces.

A triphosphasumanene trisulfide was designed and synthesized as an out-of-plane anisotropic π-conjugated molecule. Incorporating three anisotropic phosphine sulfide moieties into a sumanene skeleton induced a cumulative anisotropy with a large dipole moment (12.0 D), which is aligned in perpendicular direction with respect to the π-framework and more than twice as large as those of conventional out-of-plane anisotropic molecules. In the crystal, the molecules align to form columnar structures, in which electron-rich and electron-deficient sides of the π-framework face each other. The interactions between the electron-rich surfaces, which contain three sulfur atoms, and Au(111) were examined by X-ray photoelectron spectroscopy.

Inorganic and Organometallic Molecular Wires for Single-Molecule Devices.

Recent developments of single-molecule conductance measurements allow us to understand fundamental conducting properties of molecular wires. While a wide variety of organic molecular wires have been studied so far, inorganic and organometallic molecular wires have received much less attention. However, molecular wires with transition-metal atoms show interesting features and functions distinct from those of organic wires. These properties originate mainly from metal-ligand dπ-pπ interactions and metal-metal d-d interactions. Thanks to the rich combination of metal atoms and supporting ligands, frontier orbital energies of the molecular wires can be finely tuned to lead to highly conducting molecular wires. Moreover, the unique electronic structures of metal complexes are susceptible to subtle environmental changes, leading to potential functional molecular devices. This article reviews recent advances in the single-molecule conductance study of inorganic and organometallic molecular wires.

Single Molecular Junction Study on H2 O@C60 : H2 O is "Electrostatically Isolated".

A water molecule exhibits characteristic properties on the basis of hydrogen bonding. In the past decade, single water molecules placed in non-hydrogen-bonding environments have attracted growing attention. To reveal the fundamental properties of a single water molecule, endohedral fullerene H2 O@C60 is an ideal and suitable model. We examined the electronic properties of H2 O@C60 by performing single-molecule measurements. The conductance of a single molecular junction based on H2 O@C60 was found to be comparable to that of empty C60 . The observed values were remarkably higher than those obtained for conventional molecular junctions due to the effective hybridization of the π-conjugated system to the metal electrode. Additionally, the results undoubtedly exclude the possibility of electrostatic contact of entrapped H2 O with the carbon wall of C60 . We finally concluded that H2 O entrapped inside a C60 cage can be regarded as an electrostatically isolated molecule.

In situ observation of the formation process for free-standing Au nanowires with a scanning electron microscope.

We have developed a simultaneous electronic and structural characterization method for studying the formation process for Au nanowires. The method is based on two-probe electronic transport measurement of free-standing Au nanowires and simultaneous structural characterization using scanning electron microscopy (SEM). We measured the electronic currents during the electromigration (EM)-induced narrowing process for the free-standing Au nanowires. A free-standing Au nanowire with a desired conductance value was fabricated by EM. Simultaneous SEM and conductance measurements revealed the EM-induced narrowing process for the Au wires, in which material transfer in the nanowires caused growth towards the positively biased electrode and contact failure at the negatively biased electrode. The narrowed free-standing Au nanowires were stable and could be maintained for more than 10 h without their conductance changing. These results indicate the high stability of the EM-processed Au nanowires compared to Au nanowires fabricated by mechanical elongation or the breaking of Au nanocontacts.

Atomic structure of water/Au, Ag, Cu and Pt atomic junctions.

Much progress has been made in understanding the transport properties of atomic-scale conductors. We prepared atomic-scale metal contacts of Cu, Ag, Au and Pt using a mechanically controllable break junction method at 10 K in a cryogenic vacuum. Water molecules were exposed to the metal atomic contacts and the effect of molecular adsorption was investigated by electronic conductance measurements. Statistical analysis of the electronic conductance showed that the water molecule(s) interacted with the surface of the inert Au contact and the reactive Cu ant Pt contacts, where molecular adsorption decreased the electronic conductance. A clear conductance signature of water adsorption was not apparent at the Ag contact. Detailed analysis of the conductance behaviour during a contact-stretching process indicated that metal atomic wires were formed for the Au and Pt contacts. The formation of an Au atomic wire consisting of low coordination number atoms leads to increased reactivity of the inert Au surface towards the adsorption of water.

Controlling the formation process and atomic structures of single pyrazine molecular junction by tuning the strength of the metal-molecule interaction.

The formation process and atomic structures were investigated for single pyrazine molecular junctions sandwiched by three different Au, Ag, and Cu electrodes using a mechanically controllable break junction technique in ultrahigh vacuum conditions at 300 K. We demonstrated that the formation process of the single-molecule junction crucially depended on the choice of the metal electrodes. While single-molecule junction showing two distinct conductance states were found for the Au electrodes, only the single conductance state was evident for the Ag electrodes, and there was no junction formation for the Cu electrodes. These results suggested that metal-molecule interaction dominates the formation process and probability of the single-molecule junction. In addition to the metal-molecule interaction, temperature affected the formation process of the single-molecule junction. The single pyrazine molecular junction formed between Au electrodes exhibited significant temperature dependence where the junction-formation probability was about 8% at 300 K, while there was no junction-formation at 100 K. Instead of the junction formation, an Au atomic wire was formed at the low temperature. This study provides insight into the tuning of the junction-forming process for single-molecule junctions, which is needed to construct device structures on a single molecule scale.

Surface-Enhanced Raman Scattering in Molecular Junctions.

Surface-enhanced Raman scattering (SERS) is a surface-sensitive vibrational spectroscopy that allows Raman spectroscopy on a single molecular scale. Here, we present a review of SERS from molecular junctions, in which a single molecule or molecules are made to have contact from the top to the bottom of metal surfaces. The molecular junctions are nice platforms for SERS as well as transport measurement. Electronic characterization based on the transport measurements of molecular junctions has been extensively studied for the development of miniaturized electronic devices. Simultaneous SERS and transport measurement of the molecular junctions allow both structural (geometrical) and electronic information on the single molecule scale. The improvement of SERS measurement on molecular junctions open the door toward new nanoscience and nanotechnology in molecular electronics.