Chirality-driven self-assembly: application toward renewable/exchangeable resin-immobilized catalysts.

Resin-immobilized catalysts were prepared through chirality-driven self-assembly. The method allows the resin-immobilized catalyst to be regenerated under mild conditions and in situ catalyst exchange to be carried out quantitatively. The uniqueness of the methodology was demonstrated by the preparation of a catalyst for TEMPO oxidation as well as a two-step sequential TEMPO oxidation/aldol condensation sequence enabled by facile catalyst exchange.

Synthesis and Structure of a Longitudinally Twisted Hexacene.

The addition of phenyllithium to a polycyclic quinone, 9,11,12,21,22,24-hexaphenyltetrabenzo[a,c,n,p]hexacene-10,23-dione (10), followed by SnCl2 -mediated reduction of the diol intermediate, yielded 9,10,11,12,21,22,23,24-octaphenyltetrabenzo-[a,c,n,p]hexacene (4). Crystallographic analysis of hexacene 4 showed it to possess a longitudinal twist of 184°, which was in good agreement with AM1 calculations. In addition to being the most twisted acene synthesized to this point, compound 4 contains within its substructure the most twisted naphthalene, anthracene, tetracene, and pentacene moieties described.

A Superior Synthesis of Longitudinally Twisted Acenes.

Seven longitudinally twisted acenes (an anthracene, two tetracenes, three pentacenes, and a hexacene) have been synthesized by the addition of aryllithium reagents to the appropriate quinone precursors, followed by SnCl2 -mediated reduction of their diol intermediates, and several of these acenes have been crystallographically characterized. The new syntheses of the three previously reported twisted acenes, decaphenylanthracene (1), 9,10,11,20,21,22-hexaphenyltetrabenzo[a,c,l,n]pentacene (2), and 9,10,11,12,13,14,15,16-octaphenyldibenzo[a,c]tetracene (14), resulted in a reduction of the number of synthetic steps. As a consequence their overall yields were increased by factors of 50-, 24-, and 66-fold, respectively. All of the twisted acene syntheses reported here are suitable for the synthesis of at least gram quantities of these remarkable hydrocarbon materials.

Elution of rifampin and vancomycin from a weight-bearing silorane-based bone cement.

AIMS: Poly(methyl methacrylate) (PMMA)-based bone cements are the industry standard in orthopaedics. PMMA cement has inherent disadvantages, which has led to the development and evaluation of a novel silorane-based biomaterial (SBB) for use as an orthopaedic cement. In this study we test both elution and mechanical properties of both PMMA and SBB, with and without antibiotic loading. METHODS: For each cement (PMMA or SBB), three formulations were prepared (rifampin-added, vancomycin-added, and control) and made into pellets (6 mm × 12 mm) for testing. Antibiotic elution into phosphate-buffered saline was measured over 14 days. Compressive strength and modulus of all cement pellets were tested over 14 days. RESULTS: The SBB cement was able to deliver rifampin over 14 days, while PMMA was unable to do so. SBB released more vancomycin overall than did PMMA. The mechanical properties of PMMA were significantly reduced upon rifampin incorporation, while there was no effect to the SBB cement. Vancomycin incorporation had no effect on the strength of either cement. CONCLUSION: SBB was found to be superior in terms of rifampin and vancomycin elution. Additionally, the incorporation of these antibiotics into SBB did not reduce the strength of the resultant SBB cement composite whereas rifampin substantially attenuates the strength of PMMA. Thus, SBB emerges as a potential weight-bearing alternative to PMMA for the local delivery of antibiotics. Cite this article: Bone Joint Res 2021;10(4):277-284.

Construction of Janus dendrimers through a self-assembly approach involving chiral discrimination at a focal point.

A strategy to build Janus dendrimers via the chirality-directed self-assembly of heteroleptic Zn(ii) BOX complexes is reported. The method allows quantitative synthesis of Janus dendrimers in situ without the need for purifications. Each dendritic domain of the Janus dendrimers can be recycled upon disassembly at the focal point.

Properties of silorane-based dental resins and composites containing a stress-reducing monomer.

OBJECTIVE: To evaluate properties of silorane-based resins and composites containing a stress reducing monomer. METHODS: Resin mixtures and composites were formulated containing (a) a developmental stress reducing monomer [TOSU; Midwest Research Institute]; (b) Sil-Mix (3M-ESPE); (c) photo cationic initiator system. Standard BISGMA/TEGDMA resin (B/T) and composite (Filtek Z250) were used as controls. Polymerization volume change was measured using a NIST mercury dilatometer and polymerization stress using an Enduratec mechanical testing machine. Three point bend tests determined flexural elastic modulus, work of fracture, and ultimate strength (ADA 27; ISO 4049). Fracture toughness was measured using ASTM E399-90. Four groups of resins and composites were tested: Sil-Mix, methacrylate standard, and Sil-Mix with two addition levels of TOSU. An ANOVA was used and significant differences ranked using Student-Newman-Keuls test (alpha=0.05). RESULTS: Polymerization stress values for resins containing TOSU were significantly less than the other materials. Polymerization shrinkage values for Sil-Mix formulations were significantly less than for B/T, but were not different from each other. TOSU-containing formulations generally had somewhat lower mechanical properties values than Sil-Mix or B/T. Polymerization stress values for Sil-Mix-based composites were significantly less as compared to Z250. The 1wt.% TOSU composite had the lowest stress. No difference between composite groups was noted for fracture toughness or work of fracture. For ultimate strength, the 5wt.% TOSU formulation differed significantly from Z250. All Sil-Mix formulations had elastic modulus values significantly different from Z250. SIGNIFICANCE: The ability of TOSU to reduce polymerization stress without a proportional reduction in mechanical properties provides a basis for improvement of silorane-based composites.

Quantum-Mechanical QSPR Models for Polymerization Volume Change of Epoxides and Methacrylates Based on Mercury Dilatometry Results.

Polymerization volume change (PVC) was measured systematically using mercury dilatometry for 41 epoxide and methacrylate monomers with quartz filler. Quantitative structure property relationship (QSPR) models were developed based on this previously unreported data to gain insight in the data collection method for future models. Successful models included only data from those samples which polymerized to hardness. The most significant descriptors in these models related to monomer reactivity. In contrast, PVC data collected under experimental conditions which maximized monomer conversion resulted in descriptors describing size and branching, indicating conversion must be considered for future PVC measurements. A Rule of Mixtures (ROM) correction term improved correlations of the dilatometer data with varying quartz content, and an adjustment for conversion may similarly enable inclusion of data which had not polymerize to hardness.

Rational design of dental materials using computational chemistry.

One of our primary research emphases is the rational design of biomaterials. In this effort we apply a combination of theoretical and experimental approaches, both of which contribute directly to the completion of such a project. Computational chemistry has achieved routine status in modern chemical investigations, and the state-of-the-art is briefly summarized. In such a difficult endeavor as the systematic development of biomaterials, computational chemistry is a natural partner for traditional chemists. Herein, we describe several successful applications of this synergy to the design of dental biomaterials. These include reactivity modeling, sensitization, and density. We also report preliminary progress of polymerization volume change experiments on epoxides that have been specifically designed to provide standardized results for computational analysis.

Is 2-cyclopropylpropene really gauche?

Infrared spectra of gaseous and solid 2-cyclopropylpropene (2-CPP, c-C3H5C (CH3)CH2) have been recorded from 3500 to 40 cm-1, and Raman spectra (3200-150 cm-1) of the liquid as well as mid-infrared spectra of 2-CPP in liquid krypton solution (from -105 to -150 degrees C) were also obtained. Ab initio calculations, with basis sets up to 6-311+G(2df, 2pd), were carried out for this molecule, using the restricted Hartree-Fock (RHF) approach, with full electron correlation by the perturbation method to second order (MP2(full)) and density functional theory (DFT) by the B3LYP method. The combination of the experimental and computational results (particularly with the higher basis sets) unequivocally identifies the more stable conformer of 2-CPP as the trans form, with the gauche rotamer higher in energy, but also stable. The cis structure of this compound is not observed experimentally, and is predicted by the computational approaches to be a transition state. By studying the temperature variation of two well-resolved sets of conformational doublets of 2-CPP dissolved in liquid krypton, an average enthalpy difference between conformers of 182+/-18 cm-1 (2.18+/-0.22 kJ mol-1) has been determined, with the trans conformation lower in energy in the fluid states, and the sole conformer present in the polycrystalline solid phase. This enthalpy difference corresponds to an ambient temperature conformational equilibrium in the fluid phases of 2-cyclopropylpropene containing approximately 55+/-2% of the more stable trans rotameric form. A complete vibrational assignment for the trans conformer of 2-CPP is given, and many of the bands of the gauche rotamer have also been assigned. Structural parameters, dipole moments, and rotational constants for this molecule have been calculated at the MP2(full)/6-311+G(d,p) level, and these results--as well as the results from the experimental studies--are compared to similar quantities in related compounds.

Estimation of properties of a photoinitiated silorane-based composite with potential for orthopaedic applications.

We have synthesized a filler-reinforced silorane composite that has potential applications in orthopaedic surgery, such as for a bone stabilizer. The purpose of the present work was to develop a method for estimating four properties of this material; namely, maximum exotherm temperature, flexural strength, flexural modulus, and fracture toughness. The method involved the use of mixture design-of-experiments and regression analysis of results obtained using 23 formulations of the composite. We validated the estimation method by showing that, for each of four composite formulations that were not included in the method development, the value of each of the aforementioned properties was not significantly different from that obtained experimentally. Our estimation method has the potential for use in the development of a wide range of orthopaedic materials.

Silorane resin supports proliferation, differentiation, and mineralization of MLO-A5 bone cells in vitro and bone formation in vivo.

Methyl methacrylate used in bone cements has drawbacks of toxicity, high exotherm, and considerable shrinkage. A new resin, based on silorane/oxirane chemistry, has been shown to have little toxicity, low exotherm, and low shrinkage. We hypothesized that silorane-based resins may also be useful as components of bone cements as well as other bone applications and began testing on bone cell function in vitro and in vivo. MLO-A5, late osteoblast cells, were exposed to polymerized silorane (SilMix) resin (and a standard polymerized bisGMA/TEGDMA methacrylate (BT) resin and compared to culture wells without resins as control. A significant cytotoxic effect was observed with the BT resin resulting in no cell growth, whereas in contrast, SilMix resin had no toxic effects on MLO-A5 cell proliferation, differentiation, nor mineralization. The cells cultured with SilMix produced increasing amounts of alkaline phosphatase (1.8-fold) compared to control cultures. Compared to control cultures, an actual enhancement of mineralization was observed in the silorane resin-containing cultures at days 10 and 11 as determined by von Kossa (1.8-2.0 fold increase) and Alizarin red staining (1.8-fold increase). A normal bone calcium/phosphate atomic ratio was observed by elemental analysis along with normal collagen formation. When used in vivo to stabilize osteotomies, no inflammatory response was observed, and the bone continued to heal. In conclusion, the silorane resin, SilMix, was shown to not only be non cytototoxic, but actually supported bone cell function. Therefore, this resin has significant potential for the development of a nontoxic bone cement or bone stabilizer.