Optoelectronics of Multijunction Heterostructures of Transition Metal Dichalcogenides.

Among p-n junction devices with multilayered heterostructures with WSe2 and MoSe2, a device with the MoSe2-WSe2-MoSe2 (NPN) structure showed a remarkably high photoresponse, which was 1000 times higher than the MoSe2-WSe2 (NP) structure. The ideality factor of the NPN structure was estimated to be ∼1, lower than that of the NP structure. It is claimed that the NPN structure formed a thinner depletion region than that of the NP structure because of the difference of carrier concentrations of MoSe2 and WSe2. Hence, the built-in electric field was weaker, and the motion of the photocarriers was facilitated. These behaviors were confirmed experimentally from a photocurrent mapping analysis and Kelvin probe force microscopy. The work function depended on the wavelength of the illuminator, and quasi-Fermi level was estimated. The surface photovoltage on the MoSe2 region was higher than that on WSe2 because the lower bandgap of MoSe2 induces more electron-hole pair generation.

Selective Butyrate Esterase Probe for the Rapid Colorimetric and Fluorogenic Identification of Moraxella catarrhalis.

Clinical identification of the pathogenic bacterium Moraxella catarrhalis in cultures relies on the detection of bacterial butyrate esterase (C4-esterase) using a coumarin-based fluorogenic substrate, 4-methylumbelliferyl butyrate. However, this classical probe may give false-positive responses because of its poor stability and lack of specificity. Here, we report a new colorimetric and fluorogenic probe design employing a meso-ester-substituted boron dipyrromethene (BODIPY) dye for the specific detection of C4-esterase activity expressed by M. catarrhalis. This new probe has resistance to nonspecific hydrolysis that is far superior to the classical probe and also selectively responds to esterase with rapid colorimetric and fluorescence signal changes and large "turn-on" ratios. The probe was successfully applied to the specific detection of M. catarrhalis with high sensitivity.

Comparative antibacterial and antifungal activities of sulfur nanoparticles capped with chitosan.

The antimicrobial activity of sulfur nanoparticles (SNPs) was compared with elemental sulfur and sulfur-containing salts (sodium thiosulfate and sodium metabisulfite) against bacteria (Escherichia coli, Staphylococcus aureus) and fungi (Aspergillus flavus, Candida albicans) using the paper disc, broth microdilution, and time-kill assay methods. The results of the paper disc and MIC tests showed stronger antimicrobial activity of SNPs compared to the elemental sulfur and sulfur-containing salts. SNPs showed more potent activity against bacteria than fungi. Among the test microorganisms, E. coli (Gram-negative) was the most susceptible to SNPs, followed by S. aureus (Gram-positive), C. albicans (yeast), and A. flavus (mold). Scanning electron micrographs of microorganisms treated with SNPs showed different cell disruption patterns depending on the type of microorganisms.

Magnetic resonance imaging evaluation of the distal oblique bundle in the distal interosseous membrane of the forearm.

BACKGROUND: Some cadaveric studies have reported the role of the distal oblique bundle (DOB) in the distal radioulnar joint stability. We aimed to determine whether the presence of the DOB can be identified and its thickness can be measured in magnetic resonance imaging (MRI) examinations. METHODS: We retrospectively reviewed 468 wrist and forearm MRIs. Inclusion criteria were wrist or forearm MRIs taken in patients older than 18 years of age, and exclusion criteria were patients with acute wrist or forearm fractures, infections, or malignant tumors. We selected 80 MRIs that provided adequate coverage of the distal interosseous membrane (DIOM). The thickness of the DIOM in the T2-weighted transverse plane was measured on the picture archiving and communicating system. We used a model-based clustering method to determine whether some individuals have thicker DIOMs that can be considered as the DOB. RESULTS: The thickness of the DIOM demonstrated a bimodal distribution, indicating the presence of patients with a thick DIOM (DOB). The model-based clustering method indicated that the optimal cutoff point was 1.0 mm. Twenty-six individuals (32.5%) had thick DIOMs with a mean thickness of 1.4 mm (standard deviation, 0.2 mm), while 54 individuals (67.5%) had thin DIOMs with a mean thickness of 0.6 mm (standard deviation, 0.2 mm). CONCLUSION: Our study demonstrates that it is possible to identify the DOB and measure its thickness using MRI. Future in-vivo studies of the DOB using MRI in patients with distal radioulnar joint pathologies may reveal its role in the distal radioulnar joint stability.

Clinical Performance of the 1st American Academy of Orthopaedic Surgeons Clinical Guideline on Prevention of Symptomatic Pulmonary Embolism after Total Knee Arthroplasty in Korean Patients.

We sought to document the clinical performance of the 1st American Academy of Orthopaedic Surgeons (AAOS) guideline on the prevention of symptomatic pulmonary embolism (PE) after total knee arthroplasty (TKA) in Korean patients, in terms of the proportions of the each risk-stratified group, efficacy and safety. Consecutive 328 patients underwent TKA were preoperatively assessed for the risks of PE and bleeding and categorized into 4 groups: 1) standard risk, 2) high risk for PE, 3) high risk for bleeding, and 4) high risks both for PE and bleeding. One of three options was administered according to the groups (aspirin in group 1 or 4; enoxaparin and following aspirin in group 2; antithrombotic stocking in group 3). Incidences of symptomatic deep vein thrombosis (DVT) and PE, and major or minor bleeding complications were evaluated. Majority of the patients (86%) were assessed to be with standard risks both for PE and bleeding. No patient experienced symptomatic DVT or PE and major bleeding. Eleven percent of the patients discontinued chemoprophylaxis because of bleeding-related wound complication. In conclusion, the 1st AAOS guideline functions successfully in Korean patients undergoing TKA in terms of prevention of symptomatic DVT and PE while avoiding major bleeding complications.

SAFETY OF A CRM197-CONJUGATED HAEMOPHILUS INFLUENZAE TYPE B VACCINE IN KOREAN CHILDREN.

Haemophilus influenzae type b (Hib) is a major cause of meningitis and pneumonia with high morbidity and mortality rates in young children. The introduction of effective and well-tolerated conjugate Hib vaccines, has nearly eradicated this disease in many countries. We investigated the safety of the Hib PRP-CRM197 vaccine in a multi-center post-marketing surveillance (PMS) study. Korean children (N = 764) aged 1-33 months were enrolled when receiving a routine primary immunization or a booster vaccine with Hib PRP-CRM197 and solicited and unsolicited adverse events (AEs) were recorded using a diary card for 7 and 28 days after each vaccination, respectively. In this study, AEs were reported by 66% of subjects but were generally mild, with 42% of subjects reporting solicited AEs and 46% reporting unsolicited AEs. Among the unsolicited AEs, 98% were determined to be unrelated to the study vaccine. The studied Hib PRP-CRM197 vaccine was well tolerated by the study group and found to have a similar safety profile to that reported in other clinical studies. This vaccine is suitable for routine immunization against Hib disease among Korean children. AEs due to this vaccine will continue to be monitored.

Validation of mandibular genioplasty using a stereolithographic surgical guide: in vitro comparison with a manual measurement method based on preoperative surgical simulation.

PURPOSE: Stereolithographic guidance, increasingly used in orthognathic surgery, has not been completely verified for genioplasty. This study compared the accuracy of manual measurement with that of a stereolithographic guide in vitro. MATERIALS AND METHODS: Thirty rapid prototype (RP) mandibular models (15 pairs) were included in the experimental (stereolithographic) and control (manual) groups (15 each). Surgical simulation was performed in the 2 groups by advancing the chin 5 mm and then vertically reducing the chin 5 mm using Mimics software. In the stereolithographic group, genioplasty was performed on mandibular RP models using a 3-dimensionally printed surgical guide based on surgical simulation results. In the control group, it was performed using an osteotomy line drawn according to simulation measurements. For the 2 groups, anterior horizontal transverse error and anterior and posterior vertical errors were compared, as were data from the osteotomized chin segment and the preoperative surgical simulation. Positional difference error was calculated and the differences were evaluated with t tests. RESULTS: For advancement genioplasty, the absolute anterior transverse error value was 0.47 ± 0.35 (mean ± standard deviation) with the stereolithographic guide, less than with the manual method (0.77 ± 0.45; P = .001). For reduction genioplasty, the absolute anterior vertical error value was 0.27 ± 0.23 mm with the stereolithographic guide versus 0.58 ± 0.49 mm with the manual method (P < .001). CONCLUSION: Use of a stereolithographic surgical guide increased accuracy, but the difference in mean error values between methods was only approximately 0.3 mm. The superior accuracy may not be compelling in favor of stereolithographic surgical guides.

Self-assembled nanonization of fatty acid-conjugated vaccine antigen for enhanced thermal stability.

The aim of this study was to evaluate the enhanced thermal stability and physicochemical properties of fattigated vaccine antigens. High molecular weight influenza hemagglutinin (Heg) was used as a model antigen because of low heat stability requiring cold chamber. Heg was conjugated with long-chain oleic acid (C18) and short-chain 3-decenoic acid (C10) to prepare fattigated Heg. Circular dichroism analysis revealed no significant changes in the three-dimensional structure post-conjugation. In the liquid state, the fattigated Heg was self-assembled into nanoparticles (NPs) due to its amphiphilic nature, with sizes of 136.27 ± 12.78 nm for oleic acid-conjugated Heg (HOC) and 88.73 ± 3.27 nm for 3-decenoic acid-conjugated Heg (HDC). Accelerated thermal stability studies at 60 °C for 7 days demonstrated that fattigated Heg exhibited higher thermal stability than Heg in various liquid or solid states. The longer-chained HOC showed better thermal stability than HDC in the liquid state, attributed to increased hydrophobic interactions during self-assembly. In bio-mimicking liquid states at 37 °C, HOC exhibited higher thermal stability than Heg. Furthermore, solid-state HOC with cryoprotectants (trehalose, mannitol, and Tween® 80) had significantly increased thermal stability due to reduced exposure of protein surface area via nanonization behavior. The current fattigation platform could be a promising strategy for developing thermostable nano vaccines of heat-labile vaccine antigens.

All-Solution-Processed High-Performance MoS2 Thin-Film Transistors with a Quasi-2D Perovskite Oxide Dielectric.

Assembling solution-processed van der Waals (vdW) materials into thin films holds great promise for constructing large-scale, high-performance thin-film electronics, especially at low temperatures. While transition metal dichalcogenide thin films assembled in solution have shown potential as channel materials, fully solution-processed vdW electronics have not been achieved due to the absence of suitable dielectric materials and high-temperature processing. In this work, we report on all-solution-processedvdW thin-film transistors (TFTs) comprising molybdenum disulfides (MoS2) as the channel and Dion-Jacobson-phase perovskite oxides as the high-permittivity dielectric. The constituent layers are prepared as colloidal solutions through electrochemical exfoliation of bulk crystals, followed by sequential assembly into a semiconductor/dielectric heterostructure for TFT construction. Notably, all fabrication processes are carried out at temperatures below 250 °C. The fabricated MoS2 TFTs exhibit excellent device characteristics, including high mobility (>10 cm2 V-1 s-1) and an on/off ratio exceeding 106. Additionally, the use of a high-k dielectric allows for operation at low voltage (∼5 V) and leakage current (∼10-11 A), enabling low power consumption. Our demonstration of the low-temperature fabrication of high-performance TFTs presents a cost-effective and scalable approach for heterointegrated thin-film electronics.

Bioengineered amyloid peptide for rapid screening of inhibitors against main protease of SARS-CoV-2.

The coronavirus disease 2019 (COVID-19) caused by severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) has evoked a worldwide pandemic. As the emergence of variants has hampered the neutralization capacity of currently available vaccines, developing effective antiviral therapeutics against SARS-CoV-2 and its variants becomes a significant challenge. The main protease (Mpro) of SARS-CoV-2 has received increased attention as an attractive pharmaceutical target because of its pivotal role in viral replication and proliferation. Here, we generated a de novo Mpro-inhibitor screening platform to evaluate the efficacies of Mpro inhibitors based on Mpro cleavage site-embedded amyloid peptide (MCAP)-coated gold nanoparticles (MCAP-AuNPs). We fabricated MCAPs comprising an amyloid-forming sequence and Mpro-cleavage sequence, mimicking in vivo viral replication process mediated by Mpro. By measuring the proteolytic activity of Mpro and the inhibitory efficacies of various drugs, we confirmed that the MCAP-AuNP-based platform was suitable for rapid screening potential of Mpro inhibitors. These results demonstrated that our MCAP-AuNP-based platform has great potential for discovering Mpro inhibitors and may accelerate the development of therapeutics against COVID-19.

Detection of sow pregnancy in day-20 urine samples using monoclonal antibody against synthesized porcine early pregnancy factor: Preliminary results.

Early diagnosis of pregnancy is directly related to cost-effective livestock production. We produced a rat monoclonal antibody (mAb) against synthesized porcine early pregnancy factor (pEPF) using conventional hybridoma technology and used it as a tool for the detection of early pregnancy in Duroc sows. The rat pEPF-mAb showed reactivity to uterine tissues of pregnant sows 20 or 30 days post-mating (day 0 defined as the day of mating) and non-pregnant sows (confirmed signs of estrus) in western blotting. Immunohistochemical analysis confirmed that pEPF was located in the stromal and grand epithelial tissues of pregnant sows 20 or 30 days post-mating. In the enzyme-linked immunosorbent assay, pEPF expression in urine and blood showed similar results, with the highest expression observed in pregnant sows 20 days post-mating, whereas there was no significant difference in expression levels between non-pregnant sows and pregnant sows 30 days post-mating. The pEPF-mAb-based pregnancy diagnostic kit can be applied to pig urine samples non-invasively collected at 20 days post-mating with 70 % accuracy. Further improvements to the kit's diagnostic performance may lead to substantial benefits for the swine industry, facilitating more efficient and accurate reproductive management.

Electrically Confined Electroluminescence of Neutral Excitons in WSe2 Light-Emitting Transistors.

Monolayer transition metal dichalcogenides (TMDs) have drawn significant attention for their potential in optoelectronic applications due to their direct band gap and exceptional quantum yield. However, TMD-based light-emitting devices have shown low external quantum efficiencies as imbalanced free carrier injection often leads to the formation of non-radiative charged excitons, limiting practical applications. Here, electrically confined electroluminescence (EL) of neutral excitons in tungsten diselenide (WSe2) light-emitting transistors (LETs) based on the van der Waals heterostructure is demonstrated. The WSe2 channel is locally doped to simultaneously inject electrons and holes to the 1D region by a local graphene gate. At balanced concentrations of injected electrons and holes, the WSe2 LETs exhibit strong EL with a high external quantum efficiency (EQE) of ≈8.2 % at room temperature. These experimental and theoretical results consistently show that the enhanced EQE could be attributed to dominant exciton emission confined at the 1D region while expelling charged excitons from the active area by precise control of external electric fields. This work shows a promising approach to enhancing the EQE of 2D light-emitting transistors and modulating the recombination of exciton complexes for excitonic devices.

Boltzmann Switching MoS2 Metal-Semiconductor Field-Effect Transistors Enabled by Monolithic-Oxide-Gapped Metal Gates at the Schottky-Mott Limit.

A gate stack that facilitates a high-quality interface and tight electrostatic control is crucial for realizing high-performance and low-power field-effect transistors (FETs). However, when constructing conventional metal-oxide-semiconductor structures with two-dimensional (2D) transition metal dichalcogenide channels, achieving these requirements becomes challenging due to inherent difficulties in obtaining high-quality gate dielectrics through native oxidation or film deposition. Here, a gate-dielectric-less device architecture of van der Waals Schottky gated metal-semiconductor FETs (vdW-SG MESFETs) using a molybdenum disulfide (MoS2) channel and surface-oxidized metal gates such as nickel and copper is reported. Benefiting from the strong SG coupling, these MESFETs operate at remarkably low gate voltages, <0.5 V. Notably, they also exhibit Boltzmann-limited switching behavior featured by a subthreshold swing of ≈60 mV dec-1 and negligible hysteresis. These ideal FET characteristics are attributed to the formation of a Fermi-level (EF) pinning-free gate stack at the Schottky-Mott limit. Furthermore, authors experimentally and theoretically confirm that EF depinning can be achieved by suppressing both metal-induced and disorder-induced gap states at the interface between the monolithic-oxide-gapped metal gate and the MoS2 channel. This work paves a new route for designing high-performance and energy-efficient 2D electronics.

Heterosynaptic MoS2 Memtransistors Emulating Biological Neuromodulation for Energy-Efficient Neuromorphic Electronics.

Heterosynaptic neuromodulation is a key enabler for energy-efficient and high-level biological neural processing. However, such manifold synaptic modulation cannot be emulated using conventional memristors and synaptic transistors. Thus, reported herein is a three-terminal heterosynaptic memtransistor using an intentional-defect-generated molybdenum disulfide channel. Particularly, the defect-mediated space-charge-limited conduction in the ultrathin channel results in memristive switching characteristics between the source and drain terminals, which are further modulated using a gate terminal according to the gate-tuned filling of trap states. The device acts as an artificial synapse controlled by sub-femtojoule impulses from both the source and gate terminals, consuming lower energy than its biological counterpart. In particular, electrostatic gate modulation, corresponding to biological neuromodulation, additionally regulates the dynamic range and tuning rate of the synaptic weight, independent of the programming (source) impulses. Notably, this heterosynaptic modulation not only improves the learning accuracy and efficiency but also reduces energy consumption in the pattern recognition. Thus, the study presents a new route leading toward the realization of highly networked and energy-efficient neuromorphic electronics.

3D Bioprinting of Hyaline Articular Cartilage: Biopolymers, Hydrogels, and Bioinks.

The musculoskeletal system, consisting of bones and cartilage of various types, muscles, ligaments, and tendons, is the basis of the human body. However, many pathological conditions caused by aging, lifestyle, disease, or trauma can damage its elements and lead to severe disfunction and significant worsening in the quality of life. Due to its structure and function, articular (hyaline) cartilage is the most susceptible to damage. Articular cartilage is a non-vascular tissue with constrained self-regeneration capabilities. Additionally, treatment methods, which have proven efficacy in stopping its degradation and promoting regeneration, still do not exist. Conservative treatment and physical therapy only relieve the symptoms associated with cartilage destruction, and traditional surgical interventions to repair defects or endoprosthetics are not without serious drawbacks. Thus, articular cartilage damage remains an urgent and actual problem requiring the development of new treatment approaches. The emergence of biofabrication technologies, including three-dimensional (3D) bioprinting, at the end of the 20th century, allowed reconstructive interventions to get a second wind. Three-dimensional bioprinting creates volume constraints that mimic the structure and function of natural tissue due to the combinations of biomaterials, living cells, and signal molecules to create. In our case-hyaline cartilage. Several approaches to articular cartilage biofabrication have been developed to date, including the promising technology of 3D bioprinting. This review represents the main achievements of such research direction and describes the technological processes and the necessary biomaterials, cell cultures, and signal molecules. Special attention is given to the basic materials for 3D bioprinting-hydrogels and bioinks, as well as the biopolymers underlying the indicated products.

3D-Printed Pectin/Carboxymethyl Cellulose/ZnO Bio-Inks: Comparative Analysis with the Solution Casting Method.

Bio-inks consisting of pectin (Pec), carboxymethyl cellulose (CMC), and ZnO nanoparticles (ZnO) were used to prepare films by solution casting and 3D-printing methods. Field emission scanning electron microscopy (FE-SEM) was conducted to observe that the surface of samples made by 3D bioprinter was denser and more compact than the solution cast samples. In addition, Pec/CMC/ZnO made by 3D-bioprinter (Pec/CMC/ZnO-3D) revealed enhanced water vapor barrier, hydrophobicity, and mechanical properties. Pec/CMC/ZnO-3D also showed strong antimicrobial activity within 12 h against S. aureus and E. coli O157: H7 bacterial strains compared to the solution cast films. Further, the nanocomposite bio-inks used for 3D printing did not show cytotoxicity towards normal human dermal fibroblast (NDFB) cells but enhanced the fibroblast proliferation with increasing exposure concentration of the sample. The study provided two important inferences. Firstly, the 3D bioprinting method can be an alternative, better, and more practical method for fabricating biopolymer film instead of solution casting, which is the main finding of this work defining its novelty. Secondly, the Pec/CMC/ZnO can potentially be used as 3D bio-inks to fabricate functional films or scaffolds and biomedical applications.

Synthesis of Fully Deacetylated Quaternized Chitosan with Enhanced Antimicrobial Activity and Low Cytotoxicity.

Fully deacetylated quaternary chitosan (DQCTS) was prepared by replacing the carboxyl group of chitosan with a quaternary ammonium salt. The DQCTS was characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), and nuclear magnetic resonance (NMR). The antimicrobial activity of DQCTS was evaluated using the minimum inhibitory concentrations (MIC) methods and time-kill assay. DQCTS exhibited strong antibacterial and antifungal activity against Staphylococcus aureus, Escherichia coli O157: H7, Candida albicans, and Aspergillus flavus. Especially, the antifungal activity against C. albicans of DQCTS was greatly improved at 15.6 µg/mL of MIC and 31.3 µg/mL of minimum fungicidal concentration (MFC). Expression levels of virulence genes of microorganisms were also significantly decreased by DQCTS treatment, and the risk of virulence of microorganisms might be decreased. The result of the cytotoxic effect of DQCTS on human skin cells (HaCaT cells) indicated that the cytotoxicity of DQCTS on HaCaT cells was nearly non-toxic at 50 µg/mL. The DQCTS, with strong antimicrobial and low toxicity, has a high potential for use in functional food packaging and biomedical applications.

Leukocyte-mediated cell dissemination and metastasis: findings from multiple types of human tumors.

Our previous studies revealed that leukocyte infiltration could trigger human breast and prostate tumor invasion through focal disruptions of the tumor capsule, which selectively favors monoclonal proliferation of tumor progenitors or a biologically more aggressive cell clone overlying the focal disruptions. Our current study, involving multiple types of human tumors, further shows that leukocyte infiltration could also trigger tumor metastasis through the following pathways: [1] more leukocytes migrate to focally disrupted tumor capsules, which forms leukocyte aggregates surrounding newly formed tumor cell clusters, [2] the physical movement of leukocytes into proliferating tumor cells disrupts the intercellular junctions and cell-surface adhesion molecules, causing the disassociation of tumor cells from the tumor core, [3] leukocytes are conjoined with some of these tumor cells through plasma membrane fusion, creating tumor cell-leukocyte chimeras (TLCs), and [4] the leukocyte of TLCs impart migratory capacity to associated tumor cell partners, physically dragging them to different tissue sites. Our findings suggest a novel pathway for tumor cell dissemination from the primary sites and the subsequent journey to new sites. Our findings also provide a unique explanation for the cellular mechanism of leukocytes on tumor invasion and metastasis. If confirmed, our hypothesis and technical approach may significantly facilitate early detection and intervention of tumor invasion and metastasis.

Optimized continuum from a photonic crystal fiber for broadband time-resolved coherent anti-Stokes Raman scattering.

We demonstrate an optimization of continuum generation in a commercially available photonic crystal fiber and show that this continuum can be used to simultaneously measure vibrational dephasing times over an unprecedented frequency range of Raman modes. The dephasing time measurement is based on 2-pulse 3-color coherent anti-Stokes Raman scattering (CARS), and requires a continuum pulse that is coherent over a broad spectral bandwidth. We demonstrate that a continuum with the required characteristics can be generated from a photonic crystal fiber by appropriately conditioning the chirp of the excitation pulse and controlling its pulse energy. We are able to simultaneously measure vibrational dephasing times of multiple Raman modes (covering 500 cm(-1) to 3100 cm(-1)) of acetonitrile and benzonitrile using the optimized continuum with broadband time-resolved CARS.

Treatment Strategy for Impending Instability in Spinal Metastases.

BACKGROUD: Determining surgical management of a spinal metastasis is difficult owing to the involvement of multiple factors. The spinal instability neoplastic score (SINS) system is a reliable tool to evaluate instability in spinal metastases. The intermediate SINS (scores 7-12) indicates impending instability, which makes it difficult to determine the proper treatment strategy. In this study, we aimed to compare the initial status and treatment outcomes of a conservative group versus an operative group among patients with spinal metastases with an intermediate SINS of 7-12. Further, we evaluated the time for conversion to surgery in patients who had initially undergone conservative treatment and identified the factors associated with the conversion. METHODS: Among the patients with a spinal metastasis with an intermediate SINS of 7-12 from May 2013 to December 2017, those who were followed up for more than 12 months were enrolled in this study. Patients with signs of a neurologic deficit or cord compression at the initial diagnosis were excluded. Finally, 79 patients (47 in the initially conservative group and 32 in the initially operative group) were enrolled in this study. The performance status, Tomita score, and Tokuhashi score were assessed for group comparison. Components of SINS, the Bilsky grade, and radiosensitivity of tumor were evaluated to determine factors associated with conversion to surgery. RESULTS: Average follow-up was 20.9 months (range, 12-46 months). The demographic variables, primary cancer type, and performance status were not significantly different between the 2 groups. However, the Tomita score was lower in the initially operative group (p = 0.006). The 1-year treatment outcome assessed based on the change in performance status and vertebral height collapse showed a tendency to deteriorate less in the initially operative group. The rate of conversion to surgery in the initially conservative group was 33% in the first year, after which there was little change in the incidence of conversion. When vertebral body collapse was less than 50% or the tumor was located in the semi-rigid region (T3-T10), the need for conversion to surgery increased statistically significantly (p = 0.039 and p = 0.042, respectively). CONCLUSIONS: The rate of conversion to surgery in initially conservatively treated patients was about 33% in the first year. When a tumor is located in T3-T10 and less than 50% vertebral body collapse is present, surgery may be the better choice than conservative treatment.