RESUMO
Aluminium is widely used in many consumer products, however the primary source of aluminium exposure to the Canadian general population is through food. Aluminium can cause neurotoxicity and reproductive toxicity at elevated exposure levels. Health-based exposure guidance values have been established for oral exposure to aluminium, including a Minimal Risk Level (MRL) by the Agency for Toxic Substances and Disease Registry (ATSDR), a Provincial Tolerable Weekly Intake (PTWI) by the Joint FAO/WHO Expert Committee on Food Additives (JECFA) and a Tolerable Weekly Intake (TWI) by the European Food Safety Authority (EFSA). Aluminium concentration in blood and urine can be used as a tool for exposure characterization in a population. A pharmacokinetic (PK) model was developed based on human dosing data to derive blood Biomonitoring Equivalents (BEs), whereas a mass balance approach was used to derive urine BEs for the above guidance values. The BEs for blood for daily intake consistent with the MRL, PTWI and TWI were 18, 16 and 8 µg/L, respectively. BEs for urine for the same guidance values were 137, 123 and 57 µg/L, respectively. The derived BEs may be useful in interpreting population-level biomonitoring data in a health risk context and thereby screening and prioritizing substances for human health risk assessment and risk management.
Assuntos
Alumínio/sangue , Alumínio/urina , Monitoramento Biológico/métodos , Alumínio/farmacocinética , Relação Dose-Resposta a Droga , Inocuidade dos Alimentos , Humanos , Modelos Biológicos , Medição de RiscoRESUMO
The evolved World Health Organization/International Programme on Chemical Safety mode of action (MOA) framework provides a structure for evaluating evidence in pathways of causally linked key events (KE) leading to adverse health effects. Although employed globally, variability in use of the MOA framework has led to different interpretations of the sufficiency of evidence in support of hypothesized MOAs. A proof of concept extension of the MOA framework is proposed for scoring confidence in the supporting data to improve scientific justification for MOA use in characterizing hazards and selecting dose-response extrapolation methods for specific chemicals. This involves selecting hypothesized MOAs, and then, for each MOA, scoring the weight of evidence (WOE) in support of causality for each KE using evolved Bradford Hill causal considerations (biological plausibility, essentiality, dose-response concordance, consistency, and analogy). This early proof of concept method is demonstrated by comparing two potential MOAs (mutagenicity and peroxisome proliferator activated receptor-alpha) for clofibrate, a rodent liver carcinogen. Quantitative confidence scoring of hypothesized MOAs is shown to be useful in characterizing the likely operative MOA. To guide method refinement and future confidence scoring for a spectrum of MOAs, areas warranting further focus and lessons learned, including the need to incorporate a narrative discussion of the weights used in the evaluation and an overall evaluation of the plausibility of the outcome, are presented.
Assuntos
Carcinógenos/toxicidade , Segurança Química , Clofibrato/toxicidade , Testes de Mutagenicidade , Estudo de Prova de Conceito , Efeitos Colaterais e Reações Adversas Relacionados a Medicamentos , Humanos , PPAR alfa/metabolismo , Medição de RiscoRESUMO
OBJECTIVES: 1,3-Butadiene (BD) exposure's link to leukemia is under regulatory scrutiny. The assessment methods for BD exposure risks have evolved from early animal and limited human studies to advanced exposure-response modelling with comprehensive quantitative data. The objec- tive of this study is to explore the nuances of exposure-response modelling, investigating how various statistical methods have influenced the quan- tification of exposure-response relationships. MATERIAL AND METHODS: Although this study was not conducted as a formal systematic review, a search was performed in Medline/Pubmed to identify all human studies on leukemia risk assessment for BD exposure. This search included articles written in English. The electronic search spanned from inception of records until July 23, 2023, using the search term: "butadiene AND (leukaemia OR leukemia OR myeloid OR lymphoid)" and was restricted to human species. Focusing on the synthetic styrene-butadiene rubber (SBR) industry cohort study conducted by the University of Alabama at Birmingham, USA, this review evaluates various statistical models and factors influenc- ing exposure-response modelling. RESULTS: Peak exposures to BD may be more influential in the dose-response relationship than cumulative or long-term exposure. The authors recommend utilizing ß-coefficients derived from the latest SBR study update, employing Cox proportional hazard modelling, non-lagged and non-transformed cumulative BD exposure, and adjusting for age and peak BD exposure. The study reveals that statistical model selection has a limited impact on the calculated dose-response effects. The significant variation in estimated cancer mortality values arises from additional assumptions needed for metrics like the excess leukemia risk or the occupational BD effective concentration. CONCLUSIONS: In con- clusion, this study provides insights into exposure-response modelling for BD exposure and leukemia mortality, highlighting the importance of peak exposures. The recommended statistical approach offers a reliable basis for regulatory risk assessment and public health population metrics. Int J Occup Med Environ Health 2024;37(3).
RESUMO
Biomonitoring Equivalents (BEs) are defined as the concentration or range of concentrations of a chemical or its metabolite in a biological medium (blood, urine, or other medium) that is consistent with an existing health-based exposure guideline such as a reference dose (RfD) or tolerable daily intake (TDI). BE values can be used as a screening tool for the evaluation of population-based biomonitoring data in the context of existing risk assessments. This study reviews available health based risk assessments and exposure guidance values for benzene from the United States Environmental Protection Agency (US EPA), Texas Commission on Environmental Quality (TCEQ), California's Office of Environmental Health Hazard Assessment (OEHHA) and the Agency for Toxic Substances and Disease Registry (ATSDR) to derive BE values for benzene in blood and urine. No BE values were derived for any of the numerous benzene metabolites or hemoglobin and albumin adducts. Using existing physiologically based pharmacokinetic (PBPK) models, government risk assessment values were translated into corresponding benzene levels in blood assuming chronic steady-state exposures. BEs for benzene in urine were derived using measured correlations between benzene in urine with benzene in blood. The BE values for benzene in blood range from 0.04 to 1.29 µg/L, depending upon the underlying non-cancer risk assessment used in deriving the BE. Sources of uncertainty relating to both the basis for the BE values and their use in evaluation of biomonitoring data, including the transience of the biomarkers relative to exposure frequency, are discussed. The BE values derived here can be used as screening tools for evaluation of population biomonitoring data for benzene in the context of the existing risk assessment and can assist in prioritization of the potential need for additional risk assessment efforts for benzene relative to other chemicals.
Assuntos
Benzeno/normas , Carcinógenos/normas , Monitoramento Ambiental/métodos , Poluentes Ambientais/normas , Medição de Risco/métodos , Animais , Benzeno/farmacocinética , Benzeno/toxicidade , Biomarcadores/metabolismo , Carcinógenos/farmacocinética , Carcinógenos/toxicidade , Poluentes Ambientais/farmacocinética , Poluentes Ambientais/toxicidade , Humanos , Valores de ReferênciaRESUMO
The National Health and Nutrition Examination Survey (NHANES) generates population-representative biomonitoring data for many chemicals including volatile organic compounds (VOCs) in blood. However, no health or risk-based screening values are available to evaluate these data from a health safety perspective or to use in prioritizing among chemicals for possible risk management actions. We gathered existing risk assessment-based chronic exposure reference values such as reference doses (RfDs), reference concentrations (RfCs), tolerable daily intakes (TDIs), cancer slope factors, etc. and key pharmacokinetic model parameters for 47 VOCs. Using steady-state solutions to a generic physiologically-based pharmacokinetic (PBPK) model structure, we estimated chemical-specific steady-state venous blood concentrations across chemicals associated with unit oral and inhalation exposure rates and with chronic exposure at the identified exposure reference values. The geometric means of the slopes relating modeled steady-state blood concentrations to steady-state exposure to a unit oral dose or unit inhalation concentration among 38 compounds with available pharmacokinetic parameters were 12.0 microg/L per mg/kg-d (geometric standard deviation [GSD] of 3.2) and 3.2 microg/L per mg/m(3) (GSD=1.7), respectively. Chemical-specific blood concentration screening values based on non-cancer reference values for both oral and inhalation exposure range from 0.0005 to 100 microg/L; blood concentrations associated with cancer risk-specific doses at the 1E-05 risk level ranged from 5E-06 to 6E-02 microg/L. The distribution of modeled steady-state blood concentrations associated with unit exposure levels across VOCs may provide a basis for estimating blood concentration screening values for VOCs that lack chemical-specific pharmacokinetic data. The screening blood concentrations presented here provide a tool for risk assessment-based evaluation of population biomonitoring data for VOCs and are most appropriately applied to central tendency estimates for such datasets.
Assuntos
Monitoramento Ambiental/métodos , Poluentes Ambientais/sangue , Modelos Químicos , Compostos Orgânicos Voláteis/sangue , Animais , Exposição Ambiental/análise , Exposição Ambiental/estatística & dados numéricos , Poluentes Ambientais/farmacocinética , Poluentes Ambientais/normas , Poluição Ambiental/estatística & dados numéricos , Humanos , Inquéritos Nutricionais , Ratos , Medição de Risco , Fatores de Risco , Compostos Orgânicos Voláteis/farmacocinética , Compostos Orgânicos Voláteis/normasRESUMO
Biomarker concentrations in spot samples of blood and urine are implicitly interpreted as direct surrogates for long-term exposure magnitude in a variety of contexts including (1) epidemiological studies of potential health outcomes associated with general population chemical exposure, and (2) cross-sectional population biomonitoring studies. However, numerous factors in addition to exposure magnitude influence biomarker concentrations in spot samples, including temporal variation in spot samples because of elimination kinetics. The influence of half-life of elimination relative to exposure interval is examined here using simple first-order pharmacokinetic simulations of urinary concentrations in spot samples collected at random times relative to exposure events. Repeated exposures were modeled for each individual in the simulation with exposure amounts drawn from lognormal distributions with varying geometric standard deviations. Relative variation in predicted spot sample concentrations was greater than the variation in underlying dose distributions when the half-life of elimination was shorter than the interval between exposures, with the degree of relative variation increasing as the ratio of half-life to exposure interval decreased. Results of the modeling agreed well with data from a serial urine collection data set from the Centers for Disease Control. Data from previous studies examining intra-class correlation coefficients for a range of chemicals relying upon repeated sampling support the importance of considering the half-life relative to exposure frequency in design and interpretation of studies using spot samples for exposure classification and exposure estimation. The modeling and data sets presented here provide tools that can assist in interpretation of variability in cross-sectional biomonitoring studies and in design of studies utilizing biomonitoring data as markers for exposure.
Assuntos
Monitoramento Ambiental , Vigilância da População , Humanos , FarmacocinéticaRESUMO
Establishing an occupational exposure limit (OEL) for N-methyl pyrrolidone (NMP) is important due to its widespread use as a solvent. Based on studies in rodents, the most sensitive toxic end point is a decrease in fetal/pup body weights observed after oral, dermal, and inhalation exposures of dams to NMP. Evidence indicates that the parent compound is the causative agent. To reduce the uncertainty in rat to human extrapolations, physiologically based pharmacokinetic (PBPK) models were developed to describe the pharmacokinetics of NMP in both species. Since in utero exposures are of concern, the models considered major physiological changes occurring in the dam or mother over the course of gestation. The rat PBPK model was used to determine the relationship between NMP concentrations in maternal blood and decrements in fetal/pup body weights following exposures to NMP vapor. Body weight decrements seen after vapor exposures occurred at lower NMP blood levels than those observed after oral and dermal exposures. Benchmark dose modeling was used to better define a point of departure (POD) for fetal/pup body weight changes based on dose-response information from two inhalation studies in rats. The POD and human PBPK model were then used to estimate the human equivalent concentrations (HECs) that could be used to derive an OEL value for NMP. The geometric mean of the PODs derived from the rat studies was estimated to be 350 mg h/l (expressed in terms of internal dose), a value which corresponds to an HEC of 480 ppm (occupational exposure of 8 h/day, 5 days/week). The HEC is much higher than recently developed internationally recognized OELs for NMP of 10-20 ppm, suggesting that these OELs adequately protect workers exposed to NMP vapor.