RESUMO
Potential applications of previously synthesized pillared graphene oxide frameworks with phenyldiboronic acid linkers in the field of the adsorption and separation of polar protic and aprotic liquid solvents have been systematically explored using grand canonical Monte Carlo simulations. Particular attention was initially paid to the adsorption of pure liquid water, methanol, and dimethyl sulfoxide. The results obtained a significant increase in the isosteric heat of adsorption at low uptake in the case of dimethyl sulfoxide, which is about 17.9 and 26.8 kJ/mol higher than the values corresponding to methanol and water adsorption. These findings indicated that from a thermodynamic point of view, these pillared graphene oxide frameworks could be used in the separation of dimethyl sulfoxide-water liquid mixtures. Systematic grand canonical Monte Carlo simulations were then subsequently performed for dimethyl sulfoxide-water mixtures, with a low dimethyl sulfoxide concentration. The calculated values of the separation selectivity indicate that these materials could have potential applications in the separation of these mixed liquid solvents. Molecular dynamics simulations performed for a representative adsorbed mixture have revealed a substantial slowing down of the dynamics under confinement, particularly in the case of the hydrogen bonds formed between water and dimethyl sulfoxide.
RESUMO
We utilized the etb platform of MOFs for the synthesis of two new water-stable compounds based on amide functionalized trigonal tritopic organic linkers H3BTBTB (L1), H3BTCTB (L2) and Al3+ metal ions, namely, Al(L1) and Al(L2). The mesoporous Al(L1) material exhibits an impressive methane (CH4) uptake at high pressures and ambient temperature. The corresponding values of 192 cm3 (STP) cm-3, 0.254 g g-1 at 100 bar, and 298 K are among the highest reported for mesoporous MOFs, while the gravimetric and volumetric working capacities (between 80 bar and 5 bar) can be well compared to the best MOFs for CH4 storage. Furthermore, at 298 K and 50 bar, Al(L1) adsorbs 50 wt % (304 cm3 (STP) cm-3) CO2, values among the best recorded for CO2 storage using porous materials. To gain insight into the mechanism accounting for the resultant enhanced CH4 storage capacity, theoretical calculations were performed, revealing the presence of strong CH4 adsorption sites near the amide groups. Our work demonstrates that amide functionalized mesoporous etb-MOFs can be valuable for the design of versatile coordination compounds with CH4 and CO2 storage capacities comparable to ultra-high surface area microporous MOFs.
RESUMO
Water adsorption in metal-organic frameworks has gained a lot of scientific attention recently due to the potential to be used in adsorption-based water capture. Functionalization of their organic linkers can tune water adsorption properties by increasing the hydrophilicity, thus altering the shape of the water adsorption isotherms and the overall water uptake. In this work, a large set of functional groups is screened for their interaction with water using ab initio calculations. The functional groups with the highest water affinities form two hydrogen bonds with the water molecule, acting as H-bond donor and H-bond acceptor simultaneously. Notably, the highest binding energy was calculated to be -12.7 Kcal/mol for the -OSO3H group at the RI-MP2/def2-TZVPP-level of theory, which is three times larger than the reference value. Subsequently, the effect of the functionalization strategy on the water uptake is examined on a selected set of functionalized MOF-74-III by performing Monte Carlo simulations. It was found that the specific groups can increase the hydrophilicity of the MOF and enhance the water uptake with respect to the parent MOF-74-III for relative humidity (RH) values up to 30%. The saturation water uptake exceeded 800 cm3/cm3 for all candidates, classifying them among the top performing materials for water harvesting.
Assuntos
Estruturas Metalorgânicas , Adsorção , Estruturas Metalorgânicas/química , Método de Monte Carlo , Água/químicaRESUMO
In the present study, we propose a new set of descriptors that, along with a few structural features of nanoporous materials, can be used by machine learning algorithms for accurate predictions of the gas uptake capacities of these materials. All new descriptors closely resemble the helium atom void fraction of the material framework. However, instead of a helium atom, a particle with an appropriately defined van der Waals radius is used. The set of void fractions of a small number of these particles is found to be sufficient to characterize uniquely the structure of each material and to account for the most important topological features. We assess the accuracy of our approach by examining the predictions of the random forest algorithm in the relative small dataset of the computation-ready, experimental (CoRE) MOFs (â¼4700 structures) that have been experimentally synthesized and whose geometrical/structural features have been accurately calculated before. We first performed grand canonical Monte Carlo simulations to accurately determine their methane uptake capacities at two different temperatures (280 and 298 K) and three different pressures (1, 5.8, and 65 bar). Despite the high chemical and structural diversity of the CoRE MOFs, it was found that the use of the proposed descriptors significantly improves the accuracy of the machine learning algorithm, particularly at low pressures, compared to the predictions made based solely on the rest structural features. More importantly, the algorithm can be easily adapted for other types of nanoporous materials beyond MOFs. Convergence of the predictions was reached even for small training set sizes compared to what was found in previous works using the hypothetical MOF database.
RESUMO
Successful implementation of reticular chemistry using a judiciously designed rigid octatopic carboxylate organic linker allowed the construction of expanded HKUST-1-like tbo-MOF series with intrinsic strong CH4 adsorption sites. The Cu-analogue displayed a concomitant enhancement of the gravimetric and volumetric surface area with the highest reported CH4 uptake among the tbo family, comparable to the best performing metal organic frameworks (MOFs) for CH4 storage. The corresponding gravimetric (BET) and volumetric surface areas of 3971 m(2) g(-1) and 2363 m(2) cm(-3) represent an increase of 115% and 47%, respectively, in comparison to the corresponding values for the prototypical HKUST-1 (tbo-MOF-1), and are 42% and 20% higher than that of tbo-MOF-2. High-pressure methane adsorption isotherms revealed a high total gravimetric and volumetric CH4 uptakes, reaching 372 cm(3) (STP) g(-1) and 221 cm(3) (STP) cm(-3), respectively, at 85 bar and 298 K. The corresponding working capacities between 5 and 80 bar were found to be 294 cm(3) (STP) g(-1) and 175 cm(3) (STP) cm(-3) and are placed among the best performing MOFs for CH4 storage particularly at relatively low temperature. To gain insight on the mechanism accounting for the resultant enhanced CH4 storage capacity, molecular simulation study was performed and revealed the presence of very strong CH4 adsorption sites near the organic linker with similar adsorption energetics as the open metal sites. The present findings support the potential of tbo-MOFs based on the supermolecular building layer (SBL) approach as an ideal platform to further enhance the CH4 storage capacity via expansion and functionalization of the quadrangular pillars.
RESUMO
The interaction of carbon dioxide with a series of functionalized aromatic molecules was studied by using quantum mechanical methods (MP2), to examine the effect of the substituent on the adsorption of CO2 . Several different initial configurations of CO2 were taken into account for each functionalized benzene to locate the energetically most favorable configuration. To get a better estimation of the binding energies, we applied an extrapolation scheme to approach the complete basis set. CH2 N3 -, COOH-, and SO3 H-functionalized benzenes were found to have the strongest interaction with CO2 , and the corresponding binding energies were calculated to be -3.62, -3.65, and -4.3 kcal mol(-1) , respectively. Electrostatic potential maps of the functionalized benzenes and electron redistribution density plots of the complexes were also created to get a better insight into the nature of the interaction of CO2 with the functionalized benzenes. The functional groups that were examined can be potentially incorporated in organic bridging molecules that connect the inorganic corners in MOF.
RESUMO
The sulfone-functionalized Zr- and Hf-UiO-67 metal-organic frameworks with hierarchical mesopores were successfully synthesized using the ligand 4,4'-dibenzoic acid-2,2'-sulfone, with acetic acid or HCl as the modulator. Compared to UiO-67, the zirconium solid shows a remarkable 122% increase in CO2 uptake, reaching 4.8 mmol g(-1) (17.4 wt %) at 1 bar and 273 K (145% at 298 K) and more than 100% increase in CO2/CH4 selectivity.
RESUMO
Covalent functionalization of tungsten disulfide (WS2 ) with photo- and electro-active nickel-porphyrin (NiP) is reported. Exfoliated WS2 interfacing NiP moieties with 1,2-dithiolane linkages is assayed in the oxygen evolution reaction under both dark and illuminated conditions. The hybrid material presented, WS2 -NiP, is fully characterized with complementary spectroscopic, microscopic, and thermal techniques. Standard yet advanced electrochemical techniques, such as linear sweep voltammetry, electrochemical impedance spectroscopy, and calculation of the electrochemically active surface area, are used to delineate the catalytic profile of WS2 -NiP. In-depth study of thin films with transient photocurrent and photovoltage response assays uncovers photo-enhanced electrocatalytic behavior. The observed photo-enhanced electrocatalytic activity of WS2 -NiP is attributed to the presence of Ni centers coordinated and stabilized by the N4 motifs of tetrapyrrole rings at the tethered porphyrin derivative chains, which work as photoreceptors. This pioneering work opens wide routes for water oxidation, further contributing to the development of non-noble metal electrocatalysts.
RESUMO
The adsorption of pure fluid carbon tetrafluoride and the separation of CF4-SF6 and CF4-N2 fluid mixtures using representative nanoporous materials have been investigated by employing Monte Carlo and molecular dynamics simulation techniques. The selected materials under study were the three-dimensional carbon nanotube networks, pillared graphene using carbon nanotube pillars, and the SIFSIX-2-Cu metal-organic framework. The selection of these materials was based on their previously reported efficiency to separate fluid SF6-N2 mixtures. The pressure dependence of the thermodynamic and kinetic separation selectivity for the CF4-SF6 and CF4-N2 fluid mixtures has therefore been investigated, to provide deeper insights into the molecular scale phenomena taking place in the investigated nanoporous materials. The results obtained have revealed that under near-ambient pressure conditions, the carbon-based nanoporous materials exhibit a higher gravimetric fluid uptake and thermodynamic separation selectivity. The SIFSIX-2-Cu material exhibits a slightly higher kinetic selectivity at ambient and high pressures.
RESUMO
The boron dipyrrin (Bodipy) chromophore was combined with either a free-base or a Zn porphyrin moiety (H(2)P and ZnP respectively), via an easy synthesis involving a cyanuric chloride bridging unit, yielding dyads Bodipy-H(2)P (4) and Bodipy-ZnP (5). The photophysical properties of Bodipy-H(2)P (4) and Bodipy-ZnP (5) were investigated by UV-Vis absorption and emission spectroscopy, cyclic voltammetry, and femtosecond transient absorption spectroscopy. The comparison of the absorption spectra and cyclic voltammograms of dyads Bodipy-H(2)P (4) and Bodipy-ZnP (5) with those of their model compounds Bodipy, H(2)P, and ZnP shows that the spectroscopic and electrochemical properties of the constituent chromophores are essentially retained in the dyads indicating negligible interaction between them in the ground state. In addition, luminescence and transient absorption experiments show that excitation of the Bodipy unit in Bodipy-H(2)P (4) and Bodipy-ZnP (5) into its first singlet excited state results in rapid Bodipy to porphyrin energy transfer-k(4) = 2.9 × 10(10) s(-1) and k(5) = 2.2 × 10(10) s(-1) for Bodipy-H(2)P (4) and Bodipy-ZnP (5), respectively-generating the first porphyrin-based singlet excited state. The porphyrin-based singlet excited states give rise to fluorescence or undergo intersystem crossing to the corresponding triplet excited states. The title complexes could also be used as precursors for further substitution on the third chlorine atom on the cyanuric acid moiety.
Assuntos
Compostos de Boro/química , Porfirinas/química , Compostos de Boro/síntese química , Técnicas Eletroquímicas , Transferência de Energia , Modelos Moleculares , Porfirinas/síntese química , Análise EspectralRESUMO
A multiscale computational study is reported that investigates the microscopic behavior of the anti-cancer drug gemcitabine (GEM) stored in metal organic frameworks IRMOF-74-III and the functionalized OH-IRMOF-74-III. Accurate Quantum Mechanics calculations indicate that the GEM-MOF interaction energy in both host structures is suitable for drug adsorption and delivery with a slow release. Based on Grand-Canonical Monte Carlo simulations, the predicted maximum loading of GEM is three-fold greater than in lipid-coated mesoporous silica nanoparticles and similar to liposome nanocarriers. Finally, Molecular Dynamics simulations reveal slow diffusion of GEM inside the pores of both hosts, which is crucial for the controlled release of GEM. This work unravels the energetics and dynamics of GEM in MOFs and highlights the ability of the biocompatible (OH)-IRMOF-74-III to be used as a promising nano encapsulator for GEM delivery.
RESUMO
In recent years, the design and discovery of new metal-organic framework (MOF) platforms with distinct structural features and tunable chemical composition has remarkably enhanced by applying reticular chemistry rules and the molecular building block (MBB) approach. We targeted the synthesis of new rare earth (RE)-MOF platforms based on a rectangular-shaped 4-c linker, acting as a rigid organic MBB. Accordingly, we designed and synthesized the organic ligand 1,2,4,5-tetrakis(4-carboxyphenyl)-3,6-dimethyl-benzene (H4L), in which the two methyl groups attached to the central phenyl ring lock the four peripheral carboxyphenyl groups to an orthogonal/vertical position. We report here a new family of RE-MOFs featuring the novel inorganic building unit, RE4(µ3-O)2 (RE: Y3+, Tb3+, Dy3+, Ho3+, Er3+, and Yb3+), with planar D2h symmetry. The rigid 4-c linker, H4L, directs the in situ assembly of the unique 8-c RE4(µ3-O)2(COO)8 cluster, resulting in the formation of the first (4, 8)-c RE-MOFs with csq topology, RE-csq-MOF-1. The structures of the yttrium (Y-csq-MOF-1) and holmium (Ho-csq-MOF-1) analogues were determined by single-crystal X-ray diffraction analysis. Y-csq-MOF-1 was successfully activated and tested for Xe/Kr separation. The results show that Y-csq-MOF-1 has high isosteric heat of adsorption for Xe (33.8 kJ mol-1), with high Xe/Kr selectivity (IAST 12.1, Henry 12.9) and good Xe uptake (1.94 mmol g-1 at 298 K and 1 bar), placing this MOF among the top-performing adsorbents for Xe/Kr separation.
RESUMO
The synthesis and spectral profile of a "turn-on" fluorescent sensor selective for Hg(2+) ions in aqueous media is described.