Evaluation of direct and maternal responses in reproduction traits based on different selection strategies for postnatal piglet survival in a selection experiment.

BACKGROUND: Postnatal piglet survival is important both in economic and animal welfare terms. It is influenced by the piglet's own direct genetic effects and by maternal genetic effects of the dam, associated with milk production and mothering abilities. These genetic effects might be correlated, affected by other non-genetic factors and unfavourably associated with other reproduction traits such as litter size, which makes the development of optimal breeding strategies a challenge. To identify the optimum selection strategy for piglet survival, a selection experiment was carried out to compare responses in survival and reproduction traits to selection on only direct, only maternal, or both genetic effects of postnatal survival. The data of the experiment were recorded from outdoor reared pigs, with first- and second-generation sires selected based on their estimated breeding values for maternal and direct effects of postnatal survival of indoor reared offspring, respectively, with the opportunity to identify potential genotype-by-environment interaction. RESULTS: A Bayesian multivariate threshold-linear model that was fitted to data on 22,483 piglets resulted in significant (Pr(h2 > 0) = 1.00) estimates of maternal and direct heritabilities between 0.12 and 0.18 for survival traits and between 0.29 and 0.36 for birth weight, respectively. Selection for direct genetic effects resulted in direct and maternal responses in postnatal survival of 1.11% ± 0.17 and - 0.49% ± 0.10, respectively, while selection for maternal genetic effects led to greater direct and maternal responses, of 5.20% ± 0.34 and 1.29% ± 0.20, respectively, in part due to unintentional within-litter selection. Selection for both direct and maternal effects revealed a significant lower direct response (- 1.04% ± 0.12) in comparison to its expected response from single-effect selection, caused by interactions between direct and maternal effects. CONCLUSIONS: Selection successfully improved post- and perinatal survival and birth weight, which indicates that they are genetically determined and that genotype-by-environment interactions between outdoor (experimental data) and indoor (selection data) housed pigs were not important for these traits. A substantially increased overall (direct plus maternal) response was obtained using selection for maternal versus direct or both direct and maternal effects, suggesting that the maternal genetic effects are the main limiting factor for improving piglet survival on which selection pressure should be emphasized.

Why breed disease-resilient livestock, and how?

BACKGROUND: Fighting and controlling epidemic and endemic diseases represents a considerable cost to livestock production. Much research is dedicated to breeding disease resilient livestock, but this is not yet a common objective in practical breeding programs. In this paper, we investigate how future breeding programs may benefit from recent research on disease resilience. MAIN BODY: We define disease resilience in terms of its component traits resistance (R: the ability of a host animal to limit within-host pathogen load (PL)) and tolerance (T: the ability of an infected host to limit the damage caused by a given PL), and model the host's production performance as a reaction norm on PL, depending on R and T. Based on this, we derive equations for the economic values of resilience and its component traits. A case study on porcine respiratory and reproductive syndrome (PRRS) in pigs illustrates that the economic value of increasing production in infectious conditions through selection for R and T can be more than three times higher than by selection for production in disease-free conditions. Although this reaction norm model of resilience is helpful for quantifying its relationship to its component traits, its parameters are difficult and expensive to quantify. We consider the consequences of ignoring R and T in breeding programs that measure resilience as production in infectious conditions with unknown PL-particularly, the risk that the genetic correlation between R and T is unfavourable (antagonistic) and that a trade-off between them neutralizes the resilience improvement. We describe four approaches to avoid such antagonisms: (1) by producing sufficient PL records to estimate this correlation and check for antagonisms-if found, continue routine PL recording, and if not found, shift to cheaper proxies for PL; (2) by selection on quantitative trait loci (QTL) known to influence both R and T in favourable ways; (3) by rapidly modifying towards near-complete resistance or tolerance, (4) by re-defining resilience as the animal's capacity to resist (or recover from) the perturbation caused by an infection, measured as temporal deviations of production traits in within-host longitudinal data series. CONCLUSIONS: All four alternatives offer promising options for genetic improvement of disease resilience, and most rely on technological and methodological developments and innovation in automated data generation.

Selective advantage of implementing optimal contributions selection and timescales for the convergence of long-term genetic contributions.

BACKGROUND: Optimal contributions selection (OCS) provides animal breeders with a framework for maximising genetic gain for a predefined rate of inbreeding. Simulation studies have indicated that the source of the selective advantage of OCS is derived from breeding decisions being more closely aligned with estimates of Mendelian sampling terms ([Formula: see text]) of selection candidates, rather than estimated breeding values (EBV). This study represents the first attempt to assess the source of the selective advantage provided by OCS using a commercial pig population and by testing three hypotheses: (1) OCS places more emphasis on [Formula: see text] compared to EBV for determining which animals were selected as parents, (2) OCS places more emphasis on [Formula: see text] compared to EBV for determining which of those parents were selected to make a long-term genetic contribution (r), and (3) OCS places more emphasis on [Formula: see text] compared to EBV for determining the magnitude of r. The population studied also provided an opportunity to investigate the convergence of r over time. RESULTS: Selection intensity limited the number of males available for analysis, but females provided some evidence that the selective advantage derived from applying an OCS algorithm resulted from greater weighting being placed on [Formula: see text] during the process of decision-making. Male r were found to converge initially at a faster rate than female r, with approximately 90% convergence achieved within seven generations across both sexes. CONCLUSIONS: This study of commercial data provides some support to results from theoretical and simulation studies that the source of selective advantage from OCS comes from [Formula: see text]. The implication that genomic selection (GS) improves estimation of [Formula: see text] should allow for even greater genetic gains for a predefined rate of inbreeding, once the synergistic benefits of combining OCS and GS are realised.

Use of haplotypes to identify regions harbouring lethal recessive variants in pigs.

BACKGROUND: Lethal recessive genetic variants are maintained at relatively low frequencies in a population in the heterozygous state, but by definition are fatal and therefore unobserved in the homozygous state. Since haplotypes allow the tagging of rare and untyped genetic variants, they have potential for studying lethal recessive variants. In this study, we used a large commercial population to identify putative lethal recessive haplotypes that impact either the total number born (TNB) or the number born alive (NBA) as a proportion of the total number born (NBA/TNB). We also compared the use of haplotypes with a single nucleotide polymorphism (SNP)-by-SNP approach and examined the benefits of using additional haplotypes imputed from low-density genotype data for the detection of lethal recessive variants. Candidate haplotypes were identified using population-wide haplotype frequencies and within-family analyses. These candidate haplotypes were subsequently assessed for putative lethal recessive effects on TNB and NBA/TNB by comparing carrier-to-carrier matings with carrier-to-non-carrier matings. RESULTS: Using both medium-density and imputed low-density genotype data six regions were identified as containing putative lethal recessive haplotypes that had an effect on TNB. It is likely that these regions were related to at least four putative lethal recessive variants, each located on a different chromosome. Evidence for putative lethal recessive effects on TNB was found on chromosomes 1, 6, 10 and 14 using haplotypes. Using haplotypes from individuals genotyped only at medium-density or a SNP-by-SNP approach did not detect any lethal recessive effects. No lethal recessive haplotypes or SNPs were detected that had an effect on NBA/TNB. CONCLUSIONS: We show that the use of haplotypes from combining medium-density and imputed low-density genotype data is superior for the identification of lethal recessive variants compared to both a SNP-by-SNP approach and to the use of only medium-density data. We developed a formal statistical framework that provided sufficient power to detect lethal recessive variants in species, which produce large full-sib families, while reducing false positive or type I errors. Applying this framework results in improvements in reproductive performance by purging lethal recessive alleles from a population in a timely and cost-effective manner.

Novel insight into the genomic architecture of feed and nitrogen efficiency measured by residual energy intake and nitrogen excretion in growing pigs.

BACKGROUND: Improvement of feed efficiency in pigs is of great economical and environmental interest and contributes to use limited resources efficiently to feed the world population. Genome scans for feed efficiency traits are of importance to reveal the underlying biological causes and increase the rate of genetic gain. The aim of this study was to determine the genomic architecture of feed efficiency measured by residual energy intake (REI), in association with production, feed conversion ratio (FCR) and nitrogen excretion traits through the identification of quantitative trait loci (QTL) at different stages of growth using a three generation full-sib design population which originated from a cross between Pietrain and a commercial dam line. RESULTS: Six novel QTL for REI were detected explaining 2.7-6.1% of the phenotypic variance in REI. At growth from 60-90 kg body weight (BW), a QTL with a significant dominance effect was identified for REI on SSC14, at a similar location to the QTL for feed intake and nitrogen excretion traits. At growth from 90-120 kg BW, three QTL for REI were detected on SSC2, SSC4 and SSC7 with significant additive, imprinting and additive effects, respectively. These QTL (except for the imprinted QTL) were positionally overlapping with QTL for FCR and nitrogen excretion traits. During final growth (120-140 kg BW), a further QTL for REI was identified on SSC8 with significant additive effect, which overlapped with QTL for nitrogen excretion. During entire analysed growth (60-140 kg BW), a novel additive QTL for REI on SSC4 was observed, with no overlapping with QTL for any other traits considered. CONCLUSIONS: The occurrence of only one overlapping QTL of REI with feed intake suggests that only a small proportion of the variance in REI was explained by change in feed intake, whereas four overlapping QTL of REI with those of nitrogen excretion traits suggests that mostly underlying factors of feed utilisation such as metabolism and protein turnover were the reason for change in REI. Different QTL for REI were identified at different growth stages, indicating that different genes are responsible for efficiency in feed utilisation at different stages of growth.

Genomic scan for quantitative trait loci of chemical and physical body composition and deposition on pig chromosome X including the pseudoautosomal region of males.

A QTL analysis of pig chromosome X (SSCX) was carried out using an approach that accurately takes into account the specific features of sex chromosomes i.e. their heterogeneity, the presence of a pseudoautosomal region and the dosage compensation phenomenon. A three-generation full-sib population of 386 animals was created by crossing Pietrain sires with a crossbred dam line. Phenotypic data on 72 traits were recorded for at least 292 and up to 315 F2 animals including chemical body composition measured on live animals at five target weights ranging from 30 to 140 kg, daily gain and feed intake measured throughout growth, and carcass characteristics obtained at slaughter weight (140 kg). Several significant and suggestive QTL were detected on pig chromosome X: (1) in the pseudoautosomal region of SSCX, a QTL for entire loin weight, which showed paternal imprinting, (2) closely linked to marker SW2456, a suggestive QTL for feed intake at which Pietrain alleles were found to be associated with higher feed intake, which is unexpected for a breed known for its low feed intake capacity, (3) at the telomeric end of the q arm of SSCX, QTL for jowl weight and lipid accretion and (4) suggestive QTL for chemical body composition at 30 kg. These results indicate that SSCX is important for physical and chemical body composition and accretion as well as feed intake regulation.

Phenotyping for Genetic Improvement of Feed Efficiency in Fish: Lessons From Pig Breeding.

Feed incurs most of the cost of aquaculture production, so feed efficiency (FE) improvement is of great importance. Our aim is to use work done in pigs to formulate a logical framework for assessing the most useful component traits influencing feed intake (FI) and efficiency in farmed fish - either to identify traits that can together be used for genetic improvement of FE, or as substitute traits for FI recording. Improvement of gross FE in growing fish can be accomplished by selection for increased growth rate. However, the correlation of growth with FE is typically only modest, and hence there is room for further improvement of FE through methods other than growth selection. Based on a literature review we propose that the most effective additional methods are selection for reduced body lipid content and for reduced residual FI (RFI). Both methods require more or less sophisticated recording equipment; in particular, the estimation of RFI requires recording of FI which is a challenge. In mammals and birds, both these approaches have been effective, and despite the high costs of FI recording, the RFI approach can be cost-efficient because maintenance requirements are high and therefore RFI variation covers a large part of FI variance. Maintenance requirements of fish are lower and therefore RFI variation covers a smaller part of FI variance. Moreover, accurate high-volume routine individual FI recording is much more challenging in fish than in mammals or birds. It follows that selection for reduced body fat content is likely a more effective (and certainly more cost-efficient) way to improve feed conversion ratio in fish than selection for reduced RFI. As long as body fat content is dealt with as an explicit selection criterion, the only valid reason for FI recording would be the requirement of RFI reduction. So, if RFI reduction is not required, there would be no need for the expense and effort of individual FI recording - and in fish breeding that would be a very desirable situation. Solid evidence for these propositions is still scarce, and their generality still needs to be confirmed.

Quantitative trait loci for meat quality traits in pigs considering imprinting and epistatic effects.

The aim of the research was to gain a better understanding of the genomic regulation of meat quality by investigating individual and epistatic QTL in a three-generation full-sib population (Pietrain x crossbred dam line). In total, 386 animals were genotyped for 96 markers. Analysed traits included pH, reflectance value, conductivity, and meat colour. Thirteen significant individual QTL were identified. The most significant QTL were detected on SSC1 and SSC9 for pH, on SSC4 for meat colour, and on SSC8 for conductivity, accounting for 3.4% to 4.7% of the phenotypic variance. Nine significant epistatic QTL pairs were detected accounting for between 5.7% and 10.9% of the phenotypic variance. Epistatic QTL pairs showing the largest effects were for reflectance value between two locations of SSC4, and for pH between SSC10 and SSC13, explaining 9.5% and 10.9% of the phenotypic variance, respectively. This study indicates that meat quality traits are influenced by numerous QTL as well as a complex network of interactions.

Variance components for survival of piglets at farrowing using a reduced animal model.

Farrowing survival is usually analysed as a trait of the sow, but this precludes estimation of any direct genetic effects associated with individual piglets. In order to estimate these effects, which are particularly important for sire lines, it is necessary to fit an animal model. However this can be computationally very demanding. We show how direct and maternal genetic effects can be estimated with a simpler analysis based on the reduced animal model and we illustrate the method using farrowing survival information on 118,193 piglets in 10,314 litters. We achieve a 30% reduction in computing time and a 70% reduction in memory use, with no important loss of accuracy. This use of the reduced animal model is not only of interest for pig breeding but also for poultry and fish breeding where large full-sib families are performance tested.

Food resource allocation patterns in lactating females in a long-term selection experiment for litter size in mice.

Resource allocation patterns, as quantified by residual food intake (RFI), and the consequences for offspring development were investigated during lactation in 96 females of a mouse line selected for 104 generations for high litter size at birth (S-line) and in 87 females of a non-selected control line (C-line). Litters of 45 C-line dams (Cs) and 48 S-line dams (Ss) were standardised (s) at birth; other dams (ns) supported total number of pups born (Cns and Sns, respectively). RFI during lactation was significantly lower in Sns-dams than in C-line dams and Sns-dams. After weaning Sns-dams seemed to be able to restore the negative resource situation. Sns-pups were about 25% less mature than Cns-pups at all times. Maturity was similar for Cs- and Ss-pups from 2 d in lactation on, and about 18% and 53% higher than Cns- and Sns-pups. The pre-weaning mortality rate was significantly higher in Sns-litters (35.6 +/-2.76) than in Cns-litters (4.95 +/-2.23). The results suggest that S-line dams allocated considerably more resources to maintenance of offspring than C-line dams. This was insufficient to provide the offspring with an adequate amount of resources, resulting in reduced pup development and increased pre-weaning mortality rates.