RESUMO
With a continuous increase in world population and food production, chemical pesticide use is growing accordingly, yet unsustainably. As chemical pesticides are harmful to the environment and developmental resistance in pests is increasing, a sustainable and effective pesticide alternative is needed. Inspired by nature, we mimic one defense strategy of plants, glandular trichomes, to shift away from using chemical pesticides by moving toward a physical immobilization strategy via adhesive particles. Through controlled oxidation of a biobased starting material, triglyceride oils, an adhesive material is created while monitoring the reactive intermediates. After being milled into particles, nanoindentation shows these particles to be adhesive even at low contact forces. A suspension of particles is then sprayed and found to be effective at immobilizing a target pest, thrips, Frankliniella occidentalis. Small arthropod pests, like thrips, can cause crop damage through virus transfer, which is prevented by their immobilization. We show that through a scalable fabrication process, biosourced materials can be used to create an effective, sustainable physical pesticide.
Assuntos
Adesivos , Adesivos/química , Animais , Tisanópteros/fisiologia , Praguicidas/química , Praguicidas/farmacologia , Tricomas/metabolismoRESUMO
Inkjet printing is a ubiquitous consumer and industrial process that involves concomitant processes of droplet impact, wetting, evaporation, and imbibement into a substrate as well as consequential substrate rearrangements and remodeling. In this work, we perform a study on the interaction between ink dispersions of different composition on substrates of increasing complexity to disentangle the motion of the liquid from the dynamic response of the substrate. We print three variations of pigmented inks and follow the ensuing dynamics at millisecond and micron time and length scales until complete drying using a multiple scattering technique, laser speckle imaging (LSI). Measurements of the photon transport mean free path, l*, for the printed inks and substrates show that the spatial region of information capture is the entire droplet volume and a depth within the substrate of a few µm beneath the droplet. Within this spatial confinement, LSI is an ideal approach for studying the solid-liquid transition at these small length and time scales by obtaining valid g2 and d2 autocorrelation functions and interpreting these dynamic changes under through kymographs. Our in situ LSI results show that droplets undergo delamination and cracking processes arising during droplet drying, which are confirmed by post mortem SEM imaging.
RESUMO
We assemble semiconductor CdSe nanoplatelets (NPs) at the air/liquid interface into 2D monolayers several micrometers wide, distinctly displaying nematic order. We show that this configuration is the most favorable energetically and that the edge-to-edge distance between neighboring NPs can be tuned by ligand exchange without disrupting film topology and nanoparticle orientation. We explore the rich assembly phase space by using depletion interactions to direct the formation of 1D nanowires from stacks of NPs. The improved control and understanding of the assembly of semiconductor NPs offers opportunities for the development of cheaper optoelectronic devices that rely on 1D or 2D charge delocalization throughout the assembled monolayers and nanowires.
RESUMO
Syneresis, the compaction of a material accompanied by fluid expulsion, is a typical mechanical instability which exists among colloidal gel based materials and that negatively affects the quality of relevant applications. We shed light onto the internal dynamics of model colloidal gels undergoing syneresis using Laser Speckle Imaging (LSI). The resulting dynamical maps capture the distinct differences in spatial and temporal relaxation patterns between colloidal gels comprising solid and liquid particles. This indicates different mechanisms of syneresis between the two systems and highlights the importance of the constituent particles and their mobile or restrictive interfaces in the mechanical relaxation of the colloidal gels during syneresis.
RESUMO
The viscoelastic properties of filaments and biopolymers play a crucial role in soft and biological materials from biopolymer networks to novel synthetic metamaterials. Colloidal particles with specific valency allow mimicking polymers and more complex molecular structures at the colloidal scale, offering direct observation of their internal degrees of freedom. Here, we elucidate the time-dependent viscoelastic response in the bending of isolated semi-flexible colloidal polymers, assembled from dipatch colloidal particles by reversible critical Casimir forces. By tuning the patch-patch interaction strength, we adjust the polymers' viscoelastic properties, and follow spontaneous bending modes and their relaxation directly on the particle level. We find that the elastic response is well described by that of a semiflexible rod with persistence length of order 1000 µm, tunable by the critical Casimir interaction strength. We identify the viscous relaxation on longer timescales to be due to internal friction, leading to a wavelength-independent relaxation time similar to single biopolymers, but in the colloidal case arising from the contact mechanics of the bonded patches. These tunable mechanical properties of assembled colloidal filaments open the door to "colloidal architectures", rationally designed (network) structures with desired topology and mechanical properties.
RESUMO
Inorganic perovskites display an enticing foreground for their wide range of optoelectronic applications. Recently, supercrystals (SCs) of inorganic perovskite nanocrystals (NCs) have been reported to possess highly ordered structure as well as novel collective optical properties, opening new opportunities for efficient films. Here, we report the large-scale assembly control of spherical, cubic, and hexagonal SCs of inorganic perovskite NCs through templating by oil-in-oil emulsions. We show that an interplay between the roundness of the cubic NCs and the tension of the confining droplet surface sets the superstructure morphology, and we exploit this interplay to design dense hyperlattices of SCs. The SC films show strongly enhanced stability for at least two months without obvious structural degradation and minor optical changes. Our results on the controlled large-scale assembly of perovskite NC superstructures provide new prospects for the bottom-up production of optoelectronic devices based on the microfluidic production of mesoscopic building blocks.
RESUMO
Low-fat food products often contain natural, edible polymers to retain the desired mouth feel and elasticity of their full-fat counterparts. This type of product, however, can suffer from syneresis: densification due to the expulsion of fluid. Gaining insight into the physical principles governing syneresis in such soft hybrid dispersions remains a challenge from a theoretical perspective, as experimental data are needed to establish a basis. We record non-accelerated syneresis in a model system for low-fat mayonnaise: a colloid polymer mixture, consisting of oil in water emulsion with starch in the aqueous phase. We find the flow rate of expelled fluid to be proportional to the difference in hydrostatic pressure over the system. The osmotic pressure of the added starch, while being higher than the hydrostatic pressure, does not prevent syneresis because the soluble starch is lost to the expelled fluid. From these findings, we conclude that forced syneresis in these systems can be described as a gravity-driven porous flow through the densely packed emulsion, explainable with a model based on Darcy's law.
RESUMO
Suspensions of solid micron-scale colloidal particles in liquid solvents are a foundational model system used to explore a wide range of phase transitions, including crystallization, gelation, spinodal decomposition, and the glass transition. One of the most commonly used systems for these investigations is the fluorescent spherical particles of polymethylmethacrylate (PMMA) suspended in a mixture of nonpolar solvents that match the density and the refractive index of the particles to minimize sedimentation and scattering. However, the particles can swell in these solvents, changing their size and density, and may leak the fluorescent dye over days to weeks; this constrains the exploration of slow and kinetically limited processes, such as near-boundary phase separation or the glass transition. In this paper, we produce PMMA colloidal particles that employ polymerizable and photostable cyanine-based fluorescent monomers spanning the range of visible wavelengths and a polymeric stabilizer prepared from polydimethylsiloxane, PDMS-graft-PMMA. Using microcalorimetry, we characterize the thermodynamics of an accelerated equilibration process for these dispersions in the buoyancy- and refractive-index-matching solvents. We use confocal differential dynamic microscopy to demonstrate that they behave as hard spheres. The suspended particles are stable for months to years, maintaining fixed particle size and density, and do not leak dye. Thus, these particles enable longer term experiments than may have been possible earlier; we demonstrate this by observing spinodal decomposition in a mixture of these particles with a depletant polymer in the microgravity environment of the International Space Station. Using fluorescence microscopy, we observe coarsening over several months and measure the growth of the characteristic length scale to be a fraction of a picometer per second; this rate is among the slowest observed in a phase-separating system. Our protocols should facilitate the synthesis of a variety of particles.
RESUMO
Confocal microscopy is widely used for three-dimensional (3D) sample reconstructions. Arguably, the most significant challenge in such reconstructions is posed by the resolution along the optical axis being significantly lower than in the lateral directions. In addition, the imaging rate is lower along the optical axis in most confocal architectures, prohibiting reliable 3D reconstruction of dynamic samples. Here, we demonstrate a very simple, cheap, and generic method of multiangle microscopy, allowing high-resolution high-rate confocal slice collection to be carried out with capillary-contained colloidal samples in a wide range of slice orientations. This method, realizable with any common confocal architecture and recently implemented with macroscopic specimens enclosed in rotatable cylindrical capillaries, allows 3D reconstructions of colloidal structures to be verified by direct experiments and provides a solid testing ground for complex reconstruction algorithms. In this paper, we focus on the implementation of this method for dense nonrotatable colloidal samples, contained in complex-shaped capillaries. Additionally, we discuss strategies to minimize potential pitfalls of this method, such as the artificial appearance of chain-like particle structures.
RESUMO
Solar devices based on semiconductor nanoparticles require the use of conductive ligands; however, replacing the native, insulating ligands with conductive metal chalcogenide complexes introduces structural defects within the crystalline nanostructure that act as traps for charge carriers. We utilized atomically thin semiconductor nanoplatelets as a convenient platform for studying, both microscopically and spectroscopically, the development of defects during ligand exchange with the conductive ligands Na4 SnS4 and (NH4 )4 Sn2 S6 . These defects can be repaired via mild chemical or thermal routes, through the addition of L-type ligands or wet annealing, respectively. This results in a higher-quality, conductive, colloidally stable nanomaterial that may be used as the active film in optoelectronic devices.
RESUMO
We use droplet microfluidics to produce monodisperse elastomeric microbubbles consisting of gas encapsulated in a polydimethylsiloxane shell. These microbubbles withstand large, repeated deformations without rupture. We perform µN-scale compression tests on individual microbubbles and find their response to be highly dependent on the shell permeability; during deformation, the pressure inside impermeable microbubbles increases, resulting in an exponential increase in the applied force. Finite element models are used to interpret and extend these experimental results enabling the design and development of deformable microbubbles with a predictable mechanical response. Such microbubbles can be designed to repeatedly transit through the narrow constrictions found in a porous medium functioning as probes of the local pressure.
RESUMO
A microfluidic approach is reported for the high-throughput, continuous production of giant unilamellar vesicles (GUVs) using water-in-oil-in-water double emulsion drops as templates. Importantly, these emulsion drops have ultrathin shells; this minimizes the amount of residual solvent that remains trapped within the GUV membrane, overcoming a major limitation of typical microfluidic approaches for GUV fabrication. This approach enables the formation of microdomains, characterized by different lipid compositions and structures within the GUV membranes. This work therefore demonstrates a straightforward and versatile approach to GUV fabrication with precise control over the GUV size, lipid composition and the formation of microdomains within the GUV membrane.
RESUMO
Here we report the development of an aqueous, self-assembling system of oppositely charged colloids leading towards particle arrangements with controlled order. The colloidal system consists of two types of particles, each consisting of refractive index matched colloidal core-shell microgel particles, which are either negatively charged or amphoteric. By slowly decreasing the pH of our system below the isoelectric point of the amphoteric particles, changing their net charge from negative to positive, the co-assembly of the colloids is induced. By using different buffer concentrations, we gain temporal and kinetic control over the acidification process and thus the ability to program the co-assembly of the two particles species.
RESUMO
The assembly of (nano)particles into compact hierarchical structures yields emergent properties not found in the individual constituents. The formation of these structures relies on a profound knowledge of the nanoscale interactions between (nano)particles, which are often designed by researchers aided by computational studies. These interactions have an effect when the (nano)particles are brought into close proximity, yet relying only on diffusion to reach these closer distances may be inefficient. Recently, physical confinement has emerged as an efficient methodology to increase the volume fraction of (nano)particles, rapidly accelerating the time scale of assembly. Specifically, the high surface area of droplets of one immiscible fluid into another facilitates the controlled removal of the dispersed phase, resulting in spherical, often ordered, (nano)particle assemblies. In this review, we discuss the design strategies, computational approaches, and assembly methods for (nano)particles in confined spaces and the emergent properties therein, such as trigger-directed assembly, lasing behavior, and structural photonic color. Finally, we provide a brief outlook on the current challenges, both experimental and computational, and farther afield application possibilities.
RESUMO
Polymer networks containing bottlebrush chains are emerging materials with exceptionally soft and highly tunable mechanical properties. However, such materials have not been extensively implemented in functional processing techniques such as three-dimensional (3D) printing. Here, we introduce a new design of soft and solvent-free polydimethylsiloxane (PDMS)-based thermoplastic elastomer which contains dangling and space-filling bottlebrush chains, featuring a yield stress and a rapid recovery after stress removal; both required for high spatial fidelity 3D printing. The developed material is composed of two copolymers; the main building block is a diblock copolymer with linear polystyrene (PS) block and bottlebrush PDMS block (PS-b-bbPDMS) while the second component is PS-b-PDMS-b-PS triblock, self-assembling to a physical network. This design provides independent tunability of each structural parameter on the molecular level, hence, macroscopic control of the materials' mechanical properties. Multiple self-supportive 3D structures with spanning elements are 3D printed at elevated temperatures using a developed material with a low shear modulus of G' = 3.3 kPa containing 3 : 1 molar ratio of diblock to triblock copolymers without the need for volatile solvent, or post-treatment. This 3D printing compatible design opens new opportunities to utilize the distinctive mechanical properties of bottlebrush materials for applications such as soft tissue scaffolds, sensors, actuators, and soft robots.
RESUMO
In recent times, 3D printing technology has revolutionized our ability to design and produce products, but optimizing the print quality can be challenging. The process of extrusion 3D printing involves pressuring molten material through a thin nozzle and depositing it onto previously extruded material. This method relies on bonding between the consecutive layers to create a strong and visually appealing final product. This is no easy task, as many parameters, such as the nozzle temperature, layer thickness, and printing speed, must be fine-tuned to achieve optimal results. In this study, a method for visualizing the polymer dynamics during extrusion is presented, giving insight into the layer bonding process. Using laser speckle imaging, the plastic flow and fusion can be resolved non-invasively, internally, and with high spatiotemporal resolution. This measurement, which is easy to perform, provides an in-depth understanding of the underlying mechanics influencing the final print quality. This methodology was tested with a range of cooling fan speeds, and the results showed increased polymer motion with lower fan speeds and, thus, explained the poor printing quality when the cooling fan was turned off. These findings show that this methodology allows for optimizing the printing settings and understanding the material behavior. This information can be used for the development and testing of novel printing materials or advanced slicing procedures. With this approach, a deeper understanding of extrusion can be built to take 3D printing to the next level.
Assuntos
Temperatura Baixa , Diagnóstico por Imagem , Movimento (Física) , Polímeros , Impressão TridimensionalRESUMO
The drying of a multi-component dispersion, such as water-based paint, ink and sunscreen to form a solid film, is a widespread process. Binary colloidal suspensions have proven capable of spontaneous layer formation through size segregation during drying. To design bespoke stratification patterns, a deeper understanding of how these emerge is crucial. Here, we visualize and quantify the spatiotemporally evolving concentration profiles in situ and with high resolution using confocal fluorescence microscopy of custom-designed binary dispersions in a well-defined geometry. Our results conclusively establish two distinct stratification routes, which give rise to three layered structures. A first thin layer develops directly underneath the evaporation front in which large particles are kinetically trapped. At later times, asymmetrical particle interactions lead to the formation of two subsequent layers enriched in small and large particles, respectively. The spatial extent and magnitude of demixing strongly depend on the initial volume fraction. We explain and reproduce the experimental concentration profiles using a theoretical model based on dynamic arrest and higher-order thermodynamic and hydrodynamic interactions. These insights unravel the key mechanisms underlying colloidal auto-stratification in multi-component suspensions, and allow preprogramming of stratification patterns in single-deposition formulations for future applications.
RESUMO
Linear-bottlebrush-linear (LBBL) triblock copolymers are emerging systems for topologically-tunable elastic materials. In this paper, a new synthetic methodology is presented to synthesize LBBL polystyrene-block-bottlebrushpolydimethylsiloxane-block-polystyrene (PS-b-bbPDMS-b-PS) triblock copolymer via the "grafting onto" approach where the precursors are individually synthesized through living anionic polymerization and selective coupling reaction. In this two-step approach, polystyrene-block-polymethylvinylsiloxane (PS-b-PMVS) diblock copolymer with a low dispersity couples with another living PS block to form PS-b-PMVS-b-PS triblock copolymer. Secondly, this is followed by grafting of separately prepared monohydride-terminated PDMS chains with controllable grafting density through a hydrosilylation reaction. In addition to fully tunable architectural parameters, this approach permits a quantitative determination of the ratio of diblock and triblock bottlebrush copolymers and consistency between batches, highlighting the feasibility for scaled-up production. These LBBL triblock copolymers self-assemble into soft, low-modulus thermoplastic elastomers, and the precise knowledge of the composition is crucial for correlating microstructure to mechanical properties.
RESUMO
Networks of aggregated colloidal particles are solidlike and can sustain an applied shear stress while exhibiting little or no creep; however, ultimately they will catastrophically fail. We show that the time delay for this yielding decreases in two distinct exponential regimes with applied stress. This behavior is universal and found for a variety of colloidal gel systems. We present a bond-rupture model that quantitatively describes this behavior and highlights the role of mesoscopic structures. Our result gives new insight into the nature of yielding in these soft solid materials.
RESUMO
Nonadsorbing polymers are widely used as thickening agents for colloids. A quantitative description of the structure and dynamics of such colloid-polymer mixtures is crucial to reveal the mechanisms accounting for the desired mechanical properties. We use confocal microscopy to study colloids with three types of commonly used polymers with different architectures: linear, subgranular cross-linked, and branched microgels. All three thickeners give rise to heterogeneous colloidal dynamics, characterized by non-Gaussian displacement distributions. However, while the ensemble-averaged particle dynamics in these materials are very similar, the underlying individual particle dynamics are not. Linear polymers give rise to depletion attraction and the formation of colloidal gels, in which the majority of particles are immobilized, while a few weakly bound particles have much higher mobility. By contrast, the branched and cross-linked polymers thicken the continuous phase of the colloid, squeezing the particles into dense pockets, where the mobility is reduced and requires more cooperative rearrangements.