Light-Driven Ammonia Production by Azotobacter vinelandii Cultured in Medium Containing Colloidal Quantum Dots.

There is an evergrowing demand for environment-friendly processes to synthesize ammonia (NH3) from atmospheric nitrogen (N2). Although diazotrophic N2 fixation represents an undeniably "green" process of NH3 synthesis, the slow reaction rate makes it less suitable for industrially meaningful large-scale production. Here, we report the photoinduced N2 fixation using a hybrid system composed of colloidal quantum dots (QDs) and aerobic N2-fixing bacteria, Azotobacter vinelandii. Compared to the case where A. vinelandii cells are simply mixed with QDs, NH3 production increases significantly when A. vinelandii cells are cultured in the presence of core/shell InP/ZnSe QDs. During the cell culture of A. vinelandii, the cellular uptake of QDs is facilitated in the exponential growth phase. Experimental results as well as theoretical calculations indicate that the photoexcited electrons in QDs within A. vinelandii cells are directly transferred to MoFe protein, the catalytic component of nitrogenase. We also observe that the excess amount of QDs left on the outer surface of A. vinelandii disrupts the cellular membrane, leading to the decrease in NH3 production due to the deactivation of nitrogenase. The successful uptake of QDs in QD-A. vinelandii hybrid with minimal amount of QDs on the outer surface of the bacteria is key to efficient photosensitized NH3 production. The comprehensive understanding of the QD-bacteria interface paves an avenue to novel and efficient nanobiohybrid systems for chemical production.

Enhanced thermal stability of InP quantum dots coated with Al-doped ZnS shell.

Colloidal InP quantum dots (QDs) have attracted a surge of interest as environmentally friendly light-emitters in downconversion liquid crystal displays and light-emitting diodes (LEDs). A ZnS shell on InP-based core QDs has helped achieve high photoluminescence (PL) quantum yield (QY) and stability. Yet, due to the difficulty in the growth of a thick ZnS shell without crystalline defects, InP-based core/shell QDs show inferior stability against QY drop compared to Cd chalcogenide precedents, e.g., CdSe/CdS core/thick-shell QDs. In this work, we demonstrate the synthesis of InP-based core/shell QDs coated with an Al-doped ZnS outer shell. QDs with an Al-doped shell exhibit remarkable improvement in thermal and air stability even when the shell thickness is below 2 nm, while the absorption and PL spectra, size, and crystal structure are nearly the same as the case of QDs with a pristine ZnS shell. X-ray photoelectron spectroscopy reveals that Al3+ in Al-doped QDs forms an Al-oxide layer at elevated temperature under ambient atmosphere. The as-formed Al-oxide layer blocks the access of external oxidative species penetrating into QDs and prevents QDs from oxidative degradation. We also trace the chemical pathway of the incorporation of Al3+ into ZnS lattice during the shell growth. Furthermore, we fabricate QD-LEDs using Al-doped and undoped QDs and compare the optoelectronic characteristics and stability.

Highly luminescent silica-coated CdS/CdSe/CdS nanoparticles with strong chemical robustness and excellent thermal stability.

We present facile synthesis of bright CdS/CdSe/CdS@SiO2 nanoparticles with 72% of quantum yields (QYs) retaining ca 80% of the original QYs. The main innovative point is the utilization of the highly luminescent CdS/CdSe/CdS seed/spherical quantum well/shell (SQW) as silica coating seeds. The significance of inorganic semiconductor shell passivation and structure design of quantum dots (QDs) for obtaining bright QD@SiO2 is demonstrated by applying silica encapsulation via reverse microemulsion method to three kinds of QDs with different structure: CdSe core and 2 nm CdS shell (CdSe/CdS-thin); CdSe core and 6 nm CdS shell (CdSe/CdS-thick); and CdS core, CdSe intermediate shell and 5 nm CdS outer shell (CdS/CdSe/CdS-SQW). Silica encapsulation inevitably results in lower photoluminescence quantum yield (PL QY) than pristine QDs due to formation of surface defects. However, the retaining ratio of pristine QY is different in the three silica coated samples; for example, CdSe/CdS-thin/SiO2 shows the lowest retaining ratio (36%) while the retaining ratio of pristine PL QY in CdSe/CdS-thick/SiO2 and SQW/SiO2 is over 80% and SQW/SiO2 shows the highest resulting PL QY. Thick outermost CdS shell isolates the excitons from the defects at surface, making PL QY relatively insensitive to silica encapsulation. The bright SiO2-coated SQW sample shows robustness against harsh conditions, such as acid etching and thermal annealing. The high luminescence and long-term stability highlights the potential of using the SQW/SiO2 nanoparticles in bio-labeling or display applications.

Rotator cuff bridging repair using acellular dermal matrix in large to massive rotator cuff tears: histologic and clinical analysis.

BACKGROUND: This study investigated the efficacy of the bridging repair using an acellular dermal matrix (ADM) and an ADM with stem cells in rabbits. Also investigated were clinical outcomes of ADM bridging repair for large to massive rotator cuff tears. MATERIALS AND METHODS: ADM, with and without stem cells, was used to cover a 5- × 5-mm-sized cuff defect in 17 rabbits, and biomechanical, histologic, and immunohistochemical analyses were conducted. Also evaluated were 24 patients with large to massive rotator cuff tears after ADM bridging repair. RESULTS: In the biomechanical test, the normal rotator cuff, cuff with ADM plus stem cells, and cuff with ADM in the rabbit model showed a maximum load (N) of 287.3, 217.5, and 170.3 and ultimate tensile strength (N/mm2) of 11.1, 8.0, and 5.2, respectively. Histologically, the cuff tendons with the ADM or ADM plus stem cells showed characteristically mature tendons as time passed. In the clinical study, the mean American Shoulder and Elbow Surgeons score improved from preoperative 50 to postoperative 83, the University of California Los Angeles Shoulder Rating Scale from 17 to 30, and the Simple Shoulder Test from 4 to 8, respectively. No further fatty deteriorations or muscle atrophy were observed on follow-up magnetic resonance imaging. A retear was found in 5 of 24 patients (21%). CONCLUSIONS: Bridging repair with ADM or stem cells in the rabbit model showed cellular infiltration into the graft and some evidence of neotendon formation. Clinically, ADM repair was a safe alternative that did not show any further fatty deterioration nor muscle atrophy in large to massive rotator cuff tears.

Posterior locked lateral compression injury of the pelvis in geriatric patients: an infrequent and specific variant of the fragility fracture of pelvis.

INTRODUCTION: Posterior locked lateral compression injury (PLLCI) of the pelvic ring is an infrequent variant of lateral compression injury, a condition described in only eight reported cases since 2000. Lateral compression injury usually results from high-energy trauma and is characterized by locking between the medially translated fractured ilium and the anterior border of the sacrum, regardless of whether the fractured ilium involves the sacroiliac joint. However, in our experience, lateral compression injury can also result from low-energy trauma as a manifestation of pelvic fragility fracture. The aim of the present study was to describe this rare form of PLLCI in a case series of geriatric patients. METHODOLOGY: A retrospective analysis of consecutive patients with pelvic ring injuries who were admitted to our hospital from January 2008 to April 2015 identified seven geriatric patients (1 male and 6 females; median age 81 years) with a form of PLLCI. RESULTS: All injuries were due to falls from a standing position onto the ground. All seven cases demonstrated characteristics of a locking fractured ilium over the anterior border of the sacrum on axial computed tomography images, but were not detected on plain radiographs. All underwent follow-up at 1 year or later with improved mean visual analogue scale scores (range 0-3). Regarding Koval walking ability scores, patients who underwent pelvic brim plating with anterior external fixation were more likely to regain their pre-injury walking ability than patients who only underwent anterior external fixation or conservative treatment. CONCLUSION: Geriatric patients can experience PLCCIs of the pelvis due to low-energy trauma. These fractures have different characteristics from those associated with severe injuries due to high-energy trauma, and they comprise an infrequent form of Rommens fragility fracture of the pelvis (type IIIa). In these cases, appropriate surgical management that includes sacroiliac plating combined with anterior external fixation can yield good outcomes.

Photodynamic treatment of multidrug-resistant bacterial infection using indium phosphide quantum dots.

Infections caused by multidrug-resistant (MDR) bacteria pose an impending threat to humanity, as the evolution of MDR bacteria outpaces the development of effective antibiotics. In this work, we use indium phosphide (InP) quantum dots (QDs) to treat infections caused by MDR bacteria via photodynamic therapy (PDT), which shows superior bactericidal efficiency over common antibiotics. PDT in the presence of InP QDs results in high-efficiency bactericidal activity towards various bacterial species, including Staphylococcus aureus, Bacillus cereus, Escherichia coli and Pseudomonas aeruginosa. Upon light absorption, InP QDs generate superoxide (O2˙-), which leads to efficient and selective killing of MDR bacteria while mammalian cells remain intact. The cytotoxicity evaluation reveals that InP QDs are bio- and blood-compatible in a wide therapeutic window. For the in vivo study, we drop a solution of InP QDs at a concentration within the therapeutic window onto MDR S. aureus-infected skin wounds of mice and perform PDT for 15 min. InP QDs show excellent therapeutic and prophylactic efficacy in treating MDR bacterial infection. These findings show that InP QDs have great potential to serve as antibacterial agents for MDR bacterial infection treatment, as an effective and complementary alternative to conventional antibiotics.

Ligands as a universal molecular toolkit in synthesis and assembly of semiconductor nanocrystals.

Successful exploitation of semiconductor nanocrystals (NCs) in commercial products is due to the remarkable progress in the wet-chemical synthesis and controlled assembly of NCs. Central to the cadence of this progress is the ability to understand how NC growth and assembly can be controlled kinetically and thermodynamically. The arrested precipitation strategy offers a wide opportunity for materials selection, size uniformity, and morphology control. In this colloidal approach, capping ligands play an instrumental role in determining growth parameters and inter-NC interactions. The impetus for exquisite control over the size and shape of NCs and orientation of NCs in an ensemble has called for the use of two or more types of ligands in the system. In multiple ligand approaches, ligands with different functionalities confer extended tunability, hinting at the possibility of atomic-precision growth and long-range ordering of desired superlattices. Here, we highlight the progress in understanding the roles of ligands in size and shape control and assembly of NCs. We discuss the implication of the advances in the context of optoelectronic applications.

Photo-Patternable Quantum Dots/Siloxane Composite with Long-Term Stability for Quantum Dot Color Filters.

Incorporation of quantum dots (QDs) into color filters (CFs) are desired for less energy loss and wider viewing angle compared to a conventional display. However, aggregation and vulnerability to heat, moisture, and chemicals in the photo-patternable matrix are critical issues of the QD-CFs with high QDs concentration. Herein, we fabricated red (10 wt %) and green (20 wt %) QD-CFs using photolithography of QD/siloxane ink containing secondary thiol monomer. Ligand-exchanged QDs were chemically incorporated in methacrylate oligosiloxane resin. QD/siloxane composite showed superior stability under harsh heat and moisture (85 °C/5% RH and 85 °C/85% RH) conditions and chemicals (EtOH, HCl, and NaOH) compared to conventional QD/PR (commercial negative photoresist). QD-CFs (10 µm thick) effectively converted blue light emitted from LED chip into red and green light, and the obtained white PL through QD-CF showed wide color gamut, which was 108% relative to NTSC. From these advantages, QD/siloxane composite will be beneficial as color-conversion photoresists are to be used as color filters in liquid crystal displays, micro light-emitting diodes, and organic light-emitting diodes.