High-precision flat-plate reference infrared radiator using perfect blackbody composite with a microcavity structure.

Onsite reference infrared radiators are used to correct thermal imagers for noncontact fever screening in real time. We have developed a flat-plate reference radiator of the highest accuracy to enhance reliability of the fever screening. Our contact-durable blackbody composite with good heat transfer, which has a microcavity structured surface offering high emissivity (>0.999), was employed for the emissive surface of the reference radiator. Evaluation of the developed reference radiator regarding the spectral emissivity, in-plane uniformity, and temperature stability demonstrated an unprecedentedly small uncertainty of 0.10°C for the radiance temperature (95% level of confidence).

Micro-cavity perfect blackbody composite with good heat transfer towards a flat-plate reference radiation source for thermal imagers.

One of the key measures to secure reliable fever screening is to calibrate a thermal imager with an accurate flat-plate blackbody device in real time. We provide durable perfect blackbody plates with both high emissivity of >0.998 and good heat transfer, ideal for a high-precision reference radiation source. Reflectance measurements and heat transfer simulation demonstrate that a micro-cavity composite of a thin resin double layer or resin mixture with thermally conductive filler is an important solution for improving the emissivity and thermal performance of blackbody plates.

Large-area perfect blackbody sheets having aperiodic array of surface micro-cavities for high-precision thermal imager calibration.

We present a large-area perfect blackbody sheet, which would offer a planar standard radiator for high-precision thermal imager calibration. Polydimethylsiloxane (PDMS) sheets with nano-precision surface micro-cavity structures achieve both ultra-low reflectance (ultra-high emissivity close to unity) over the thermal infrared wavelengths and high durability to mechanical contact. The investigation on the geometrical parameters of the conical micro-cavities, that is, radii and aspect ratios (ratio of height to radius), confirmed that the PDMS blackbody sheet with a micro-cavity radius of ∼6 µm and an aspect ratio of ∼4 exhibits the optimum hemispherical reflectance of less than 0.002 (emissivity of higher than 0.998) at the thermal infrared wavelengths (6-15 µm). Furthermore, the large-area PDMS blackbody sheet of 100 mm × 80 mm maintained an excellent in-plane uniformity of the emissivity. This unprecedented large-area perfect blackbody conforms to the International Electrotechnical Commission (IEC) standard recommendation regarding thermal imager calibration for fever screening in terms of the emissivity performance.

Changes in electronic structure of carbon supports for Pt catalysts induced by vacancy formation due to Ar+ irradiation.

X-ray absorption spectroscopy measurements were performed for the C K-edge of Pt nanoparticles on Ar+-irradiated carbon supports in order to elucidate the origin of improved catalyst performance after the introduction of vacancies into the carbon support. We observed a change in the electronic structure at the interface between the Pt nanoparticles and the carbon support after vacancy introduction, which is in good agreement with theoretical results. The results indicated that vacancy introduction resulted in a drastic change in the Pt-C interactions, which likely affected the d-band center of the Pt nanoparticles and led to the enhancement of the oxygen reduction reaction in catalysts.

Onboard experiment investigating metal leaching of fresh hydrothermal sulfide cores into seawater.

We observed the initial release rate of metals from four fresh (i.e., without long time exposure to the atmosphere) hydrothermal sulfide cores into artificial seawater. The sulfide samples were collected by seafloor drilling from the Okinawa Trough by D/V Chikyu, powdered under inert gas, and immediately subjected to onboard metal-leaching experiments at different temperatures (5 °C and 20 °C), and under different redox conditions (oxic and anoxic), for 1-30 h. Zinc and Pb were preferentially released from sulfide samples containing various metals (i.e., Mn, Fe, Cu, Zn, Cd, and Pb) into seawater. Under oxic experimental conditions, Zn and Pb dissolution rates from two sulfide samples composed mainly of iron disulfide minerals (pyrite and marcasite) were higher than those from two other sulfide samples with abundant sphalerite, galena, and/or silicate minerals. Scanning electron microscopy confirmed that the high metal-releasing sample contained several galvanic couples of iron disulfide with other sulfide minerals, whereas the low metal-releasing sample contained fewer galvanic couples or were coated by a silicate mineral. The experiments overall confirmed that the galvanic effects with iron disulfide minerals greatly induce the initial release of Zn and Pb from hydrothermal sulfides into seawater, especially under warm oxic conditions.

Evaluation of the toxicity of leaches from hydrothermal sulfide deposits by means of a delayed fluorescence-based bioassay with the marine cyanobacterium Cyanobium sp. NIES-981.

The commercial use of metals such as copper, lead, and zinc has markedly increased in recent years, resulting in increased interest in deep-sea mining of seafloor hydrothermal sulfide deposits. However, the full extent of the impact of deep-sea mining at hydrothermal field deposits on the environment remains unclear. In addition to impacting the deep sea, the leaching of heavy metals from extracted sulfide mineral may also affect the upper ocean zones as the sulfide rock is retrieved from the seafloor. Here, we used a delayed fluorescence-based bioassay using the marine cyanobacterium Cyanobium sp. NIES-981 to evaluate the toxicity of three sulfide core samples obtained from three drill holes at the Izena Hole, middle Okinawa Trough, East China Sea. Leaches from two of the cores contained high concentrations of zinc and lead, and they markedly inhibited delayed fluorescence in Cyanobium sp. NIES-981 compared with control. By examining the toxicity of artificial mixed-metal solutions with metal compositions similar to those of the leaches, we confirmed that this inhibition was a result of high zinc and lead concentrations into the leaches. In addition, we conclude that this delayed fluorescence-based bioassay is a viable method for use by deep-sea mining operations because it is quicker and requires less laboratory space and equipment than the standard assay.

Rapid ecotoxicological bioassay using delayed fluorescence in the marine cyanobacterium Cyanobium sp. (NIES-981).

The use of delayed fluorescence intensity as an endpoint for rapid estimation of the effective concentration (ECx) has been reported as an alternative to standard growth inhibition (at 72 h after exposure) in some algal species including Pseudokirchneriella subcapitata. In marine algae, although an approach of bioassaying using delayed fluorescence measurements has not been performed yet, its development would provide many benefits for marine environmental risk assessment. In this study, we selected marine cyanobacterium Cyanobium sp. (NIES-981) as our test algal species and demonstrated that this species is valid for the standard growth inhibition test based on criteria provide by Organization for Economic Co-operation and Development guidelines. Furthermore, standard inhibition tests and shorter period test using DF were performed in NIES-981 using five chemicals (3,5-DCP, simazine, diflufenican, K2Cr2O7, and CuSO4), and their EC50 and low-toxic-effect values (EC10, EC5, and NOEC) were determined from two dose-response curves. Based on comparisons of the two dose-response curves and the EC50 values, we conclude that DF intensity is useful as an endpoint for rapid estimation of EC50 in NIES-981.

Supreme-black levels enabled by touchproof microcavity surface texture on anti-backscatter matrix.

Emerging immersive high-dynamic range display technologies require not only high peak luminance but also true black levels with hemispherical reflectance below 0.001 (0.1%) to accommodate the wide dynamic range of the human eye (~105). Such low reflectance materials, denoted here as "supreme black," must exhibit near-perfect surface antireflection, extremely low in-matrix backscattering, and sufficient optical thickness, which, to date, have only been achieved by fragile sparse materials. We demonstrate a record-low hemispherical reflectance below 0.0002 (absorptance above 0.9998) in a touchproof material by satisfying the three requirements with a superwavelength surface microtexture with nanolevel details, low Mie backscattering composition, and optional additional underlayer. Our supreme black finishes are one to two orders of magnitude blacker than previously developed touchproof super-black materials. Thereby, unprecedented black levels enabling an ambient contrast ratio of ≳104 would be provided in display devices, contributing to immersive visual experiences that are critical for seamless remote collaboration and reliable virtual health care.

Ubiquitous organic molecule-based free-standing nanowires with ultra-high aspect ratios.

The critical dimension of semiconductor devices is approaching the single-nm regime, and a variety of practical devices of this scale are targeted for production. Planar structures of nano-devices are still the center of fabrication techniques, which limit further integration of devices into a chip. Extension into 3D space is a promising strategy for future; however, the surface interaction in 3D nanospace make it hard to integrate nanostructures with ultrahigh aspect ratios. Here we report a unique technique using high-energy charged particles to produce free-standing 1D organic nanostructures with high aspect ratios over 100 and controlled number density. Along the straight trajectory of particles penetrating the films of various sublimable organic molecules, 1D nanowires were formed with approximately 10~15 nm thickness and controlled length. An all-dry process was developed to isolate the nanowires, and planar or coaxial heterojunction structures were built into the nanowires. Electrical and structural functions of the developed standing nanowire arrays were investigated, demonstrating the potential of the present ultrathin organic nanowire systems.

Leaching of Metals and Metalloids from Hydrothermal Ore Particulates and Their Effects on Marine Phytoplankton.

Seafloor massive sulfide deposits have attracted much interest as mineral resources. Therefore, the potential environmental impacts of full-scale mining should be considered. In this study, we focused on metal and metalloid contamination that could be triggered by accidental leakage and dispersion of hydrothermal ore particulates from mining vessels into surface seawater. We determined the leaching potential of metals and metalloids from four hydrothermal ores collected from the Okinawa Trough into aerobic seawater and then evaluated the toxic effects of ore leachates on a phytoplankton species, Skeletonema marinoi-dohrnii complex, which is present ubiquitously in the ocean. Large amounts of metals and metalloids were released from the ground hydrothermal ores into seawater within 5 min under aerobic conditions. The main components of leachates were Zn + Pb, As + Sb, and Zn + Cu, which were obtained from the Fe-Zn-Pb-rich and Zn-Pb-rich zero-age, Ba-rich, and Fe-rich ores, respectively. The leachates had different chemical compositions from those of the ore. The rapid release and difference in chemical compositions between the leachates and the ores indicated that substances were not directly dissolved from the sulfide-binding mineral phase but from labile phases mainly on the adsorption-desorption interface of the ores under these conditions. All ore leachates inhibited the growth of S. marinoi-dohrnii complex but with different magnitudes of toxic effects. These results indicate that the fine particulate matter of hydrothermal ores is a potential source of toxic contamination that may damage primary production in the ocean. Therefore, we insist on the necessity for the prior evaluation of toxic element leachability from mineral ores into seawater to minimize mining impacts on the surface environment.

Radiation-induced reactions via the lowest excited states in cinnamic acid crystals.

Radiation-induced reactions of cinnamic acid derivatives have been examined and compared with photoreactions in the crystalline state; all the reaction products were exactly the same as those of the photoreactions, indicating that the reactions proceed only via the lowest excited state to give [2 + 2] cycloadducts, E/Z isomerization products, or starting molecules.

Temporal changes in carbon and nitrogen stable isotope ratios of macrozoobenthos on an artificial tidal flat facing a hypertrophic canal, inner Tokyo Bay.

Temporal changes in benthic food web structure were analyzed in an artificial tidal flat in inner Tokyo Bay, Japan, using carbon and nitrogen stable isotope ratios (δ(13)C and δ(15)N). Microphytobenthos were the most important food sources of macrozoobenthos, due to high microphytobenthic biomass on the tidal flat, while phytoplankton in canal water (canal POMPP), terrestrial materials from urban surface runoff (canal POMTM), and marsh plants were less important. Dietary contribution of microphytobenthos was highest in April to June, while decreased towards December owing to the supply of canal POMPP and canal POMTM following red tides and heavy rainfall events in summer to fall. Temporal changes in δ(15)N (Δδ(15)N) of consumer corresponded well to the (15)N-enrichment in canal POMPP in summer. A meta-analysis showed that the consumer-Δδ(15)N was considerably larger in inner Tokyo Bay than those in other estuaries, which may be a specific characteristic of benthic food web in highly urbanized estuaries.