RESUMO
This review aims to showcase the brachytherapy tools and technologies that have emerged during the last 10 years. Soft-tissue contrast using magnetic resonance and ultrasound imaging has seen enormous growth in use to plan all forms of brachytherapy. The era of image-guided brachytherapy has encouraged the development of advanced applicators and given rise to the growth of individualised 3D printing to achieve reproducible and predictable implants. These advances increase the quality of implants to better direct radiation to target volumes while sparing normal tissue. Applicator reconstruction has moved beyond manual digitising, to drag and drop of three-dimensional applicator models with embedded pre-defined source pathways, ready for auto-recognition and automation. The simplified TG-43 dose calculation formalism directly linked to reference air kerma rate of high-energy sources in the medium water remains clinically robust. Model-based dose calculation algorithms accounting for tissue heterogeneity and applicator material will advance the field of brachytherapy dosimetry to become more clinically accurate. Improved dose-optimising toolkits contribute to the real-time and adaptive planning portfolio that harmonises and expedites the entire image-guided brachytherapy process. Traditional planning strategies remain relevant to validate emerging technologies and should continue to be incorporated in practice, particularly for cervical cancer. Overall, technological developments need commissioning and validation to make the best use of the advanced features by understanding their strengths and limitations. Brachytherapy has become high-tech and modern by respecting tradition and remaining accessible to all.
Assuntos
Braquiterapia , Neoplasias do Colo do Útero , Feminino , Humanos , Braquiterapia/métodos , Radiometria , Imageamento por Ressonância Magnética , Algoritmos , Planejamento da Radioterapia Assistida por Computador/métodos , Dosagem RadioterapêuticaRESUMO
Brachytherapy has a long history of delivering a highly conformal radiation dose to the target volume with sparing of adjacent normal tissue and has an irreplaceable role in certain cancers, such as cervical and prostate cancers. There have been futile attempts to replace brachytherapy with other radiation techniques. Despite that there are multifaceted challenges in preserving this dying art, from establishment, to a trained workforce, to maintenance of the equipment and source replacement costs. Here we focus on the challenges to access brachytherapy, the availability and distribution of care across the globe and appropriate training leading to proper implementation of the procedure. Brachytherapy holds a significant place in the treatment armamentarium of most common cancers, such as cervical, prostate, head and neck and skin cancers. However, there is an uneven distribution of brachytherapy facilities, not only across the globe, but also at a national level, with a larger proportion of facilities concentrated in certain regions, more so in low and low-middle income countries. The regions with the highest incidence of cervical cancer have the least access to brachytherapy facilities. Attempts to bridge the gap are essential and should be focused on uniform distribution and access to care, improving training of the workforce through specialised training programmes, reducing the cost of care, planning to reduce the recurring cost, generating evidence and research guidelines, renewing interest in brachytherapy through rebranding, use of social media and building an attainable long-term roadmap.
Assuntos
Braquiterapia , Neoplasias da Próstata , Radioterapia Conformacional , Neoplasias do Colo do Útero , Masculino , Feminino , Humanos , Braquiterapia/métodos , Radioterapia Conformacional/métodos , Neoplasias da Próstata/radioterapia , Neoplasias do Colo do Útero/radioterapia , Dosagem RadioterapêuticaRESUMO
PURPOSE: Complex radiotherapy fields delivered using a tertiary multileaf collimator (MLC) often feature small open segments surrounded by large areas of the beam only shielded by the MLC. The aim of this study was to test the ability of two modern dose calculation algorithms to accurately calculate the dose in these fields which would be common, for example, in volumetric modulated arc treatment (VMAT) and study the impact of variations in dosimetric leaf gap (DLG), focal spot size, and MLC transmission in the beam models. METHODS: Nine test fields with small fields (0.6-3 cm side length) surrounded by large MLC shielded areas (secondary collimator 12 × 12 cm(2)) were created using a 6 MV beam from a Varian Clinac iX linear accelerator with 120 leaf MLC. Measurements of output factors and profiles were performed using a diamond detector (PTW) and compared to two dose calculations algorithms anisotropic analytical algorithm [(AAA) and Acuros XB] implemented on a commercial radiotherapy treatment planning system (Varian Eclipse 10). RESULTS: Both calculation algorithms predicted output factors within 1% for field sizes larger than 1 × 1 cm(2). For smaller fields AAA tended to underestimate the dose. Profiles were predicted well for all fields except for problems of Acuros XB to model the secondary penumbra between MLC shielded fields and the secondary collimator. A focal spot size of 1 mm or less, DLG 1.4 mm and MLC transmission of 1.4% provided a generally good model for our experimental setup. CONCLUSIONS: AAA and Acuros XB were found to predict the dose under small MLC defined field segments well. While DLG and focal spot affect mostly the penumbra, the choice of correct MLC transmission will be essential to model treatments such as VMAT accurately.
Assuntos
Modelos Teóricos , Proteção Radiológica/instrumentação , Radiometria/instrumentação , Radiometria/métodos , Radioterapia Conformacional/instrumentação , Radioterapia Conformacional/métodos , Simulação por Computador , Desenho Assistido por Computador , Dosagem Radioterapêutica , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
PURPOSE: Interfraction and intrafraction variation in anatomic structures is a significant challenge in contemporary radiotherapy. The objective of this work is to develop a novel tool for deformable structure dosimetry, using a tissue-equivalent deformable gel dosimeter that can reproducibly simulate targets subject to deformation. This will enable direct measurement of integrated doses delivered in different deformation states, and the verification of dose deforming algorithms. METHODS: A modified version of the nPAG polymer gel has been used as a deformable 3D dosimeter and phantom to investigate doses delivered to deforming tissue-equivalent geometry. The deformable gel (DEFGEL) dosimeter/phantom is comprised of polymer gel in a latex membrane, moulded (in this case) into a cylindrical geometry, and deformed with an acrylic compressor. Fifteen aluminium fiducial markers (FM) were implanted into DEFGEL phantoms and the reproducibility of deformation was determined via multiple computed tomography (CT) scans in deformed and nondeformed states before and after multiple (up to 150) deformations. Dose was delivered to the DEFGEL phantom in three arrangements: (i) without deformation, (ii) with deformation, and (iii) cumulative exposures with and without deformation, i.e., dose integration. Irradiations included both square field and a stereotactic multiple dynamic arc treatment adapted from a patient plan. Doses delivered to the DEFGEL phantom were read out using cone beam optical CT. RESULTS: Reproducibility was verified by observation of interscan shifts of FM locations (as determined via CT), measured from an absolute reference point and in terms of inter-FM distance. The majority (76%) of points exhibited zero shift, with others shifting by one pixel size consistent with setup error as confirmed with a control sample. Comparison of dose profiles and 2D isodose distributions from the three arrangements illustrated complex spatial redistribution of dose in all three dimensions occurring as a result of the change in shape of the target between irradiations, even for a relatively simple deformation. Discrepancies of up to 30% of the maximum dose were evident from dose difference maps for three orthogonal planes taken through the isocenter of a stereotactic field. CONCLUSIONS: This paper describes the first use of a tissue-equivalent, 3D dose-integrating deformable phantom that yields integrated or redistributed dosimetric information. The proposed methodology readily yields three-dimensional (3D) dosimetric data from radiation delivery to the DEFGEL phantom in deformed and undeformed states. The impacts of deformation on dose distributions were readily seen in the isodose contours and line profiles from the three arrangements. It is demonstrated that the system is potentially capable of reproducibly emulating the physical deformation of an organ, and therefore can be used to evaluate absorbed doses to deformable targets and organs at risk in three dimensions and to validate deformation algorithms applied to dose distributions.
Assuntos
Géis/química , Géis/efeitos da radiação , Radiometria/instrumentação , Tomografia Computadorizada por Raios X/métodos , Módulo de Elasticidade , Teste de Materiais , Doses de Radiação , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
PURPOSE: The use of time-resolved four-dimensional computed tomography (4D-CT) in radiotherapy requires strict quality assurance to ensure the accuracy of motion management protocols. The aim of this work was to design and test a phantom capable of large amplitude motion for use in 4D-CT, with particular interest in small lesions typical for stereotactic body radiotherapy. METHODS: The phantom of "see-saw" design is light weight, capable of including various sample materials and compatible with several surrogate marker signal acquisition systems. It is constructed of polymethylmethacrylate (Perspex) and its movement is controlled via a dc motor and drive wheel. It was tested using two CT scanners with different 4D acquisition methods: the Philips Brilliance Big Bore CT (helical scan, pressure belt) and a General Electric Discovery STE PET∕CT (axial scan, infrared marker). Amplitudes ranging from 1.5 to 6.0 cm and frequencies of up to 40 cycles per minute were used to study the effect of motion on image quality. Maximum intensity projections (MIPs), as well as average intensity projections (AIPs) of moving objects were investigated and their quality dependence on the number of phase reconstruction bins assessed. RESULTS: CT number discrepancies between moving and stationary objects were found to have no systematic dependence on amplitude, frequency, or specific interphase variability. MIP-delineated amplitudes of motion were found to match physical phantom amplitudes to within 2 mm for all motion scenarios tested. Objects undergoing large amplitude motions (>3.0 cm) were shown to cause artefacts in MIP and AIP projections when ten phase bins were assigned. This problem can be mitigated by increasing the number of phase bins in a 4D-CT scan. CONCLUSIONS: The phantom was found to be a suitable tool for evaluating the image quality of 4D-CT motion management technology, as well as providing a quality assurance tool for intercenter∕intervendor testing of commercial 4D-CT systems. When imaging objects with large amplitudes, the completeness criterion described here indicates the number of phase bins required to prevent missing data in MIPs and AIPs. This is most relevant for small lesions undergoing large motions.
Assuntos
Tomografia Computadorizada Quadridimensional/instrumentação , Neoplasias/diagnóstico por imagem , Neoplasias/cirurgia , Imagens de Fantasmas , Radiocirurgia/métodos , Artefatos , Neoplasias/patologia , Carga TumoralRESUMO
PURPOSE: Strategies for dose accumulation in deforming anatomy are of interest in radiotherapy. Algorithms exist for the deformation of dose based on patient image sets, though these are sometimes contentious because not all such image calculations are constrained by physical laws. While tumor and organ motion has been a key area of study for a considerable amount of time, deformation is of increasing interest. In this work, we demonstrate a full 3D experimental validation of results from a range of dose deformation algorithms available in the public domain. METHODS: We recently developed the first tissue-equivalent, full 3D deformable dosimetric phantom-"DEFGEL." To assess the accuracy of dose-warping based on deformable image registration (DIR), we have measured doses in undeformed and deformed states of the DEFGEL dosimeter and compared these to planned doses and warped doses. In this way we have directly evaluated the accuracy of dose-warping calculations for 11 different algorithms. We have done this for a range of stereotactic irradiation schemes and types and magnitudes of deformation. RESULTS: The original Horn and Schunck algorithm is shown to be the best performing of the 11 algorithms trialled. Comparing measured and dose-warped calculations for this method, it is found that for a 10 × 10 mm(2) square field, γ(3%∕3mm) = 99.9%; for a 20 × 20 mm(2) cross-shaped field, γ(3%∕3mm) = 99.1%; and for a multiple dynamic arc (0.413 cm(3) PTV) treatment adapted from a patient treatment plan, γ(3%∕3mm) = 95%. In each case, the agreement is comparable to-but consistently â¼1% less than-comparison between measured and calculated (planned) dose distributions in the absence of deformation. The magnitude of the deformation, as measured by the largest displacement experienced by any voxel in the volume, has the greatest influence on the accuracy of the warped dose distribution. Considering the square field case, the smallest deformation (â¼9 mm) yields agreement of γ(3%∕3mm) = 99.9%, while the most significant deformation (â¼20 mm) yields agreement of γ(3%∕3mm) = 96.7%. CONCLUSIONS: We have confirmed that, for a range of mass and density conserving deformations representative of those observable in anatomical targets, DIR-based dose-warping can yield accurate predictions of the dose distribution. Substantial differences can be seen between the results of different algorithms indicating that DIR performance should be scrutinized before application todose-warping. We have demonstrated that the DEFGEL deformable dosimeter can be used to evaluate DIR performance and the accuracy of dose-warping results by direct measurement.
Assuntos
Imageamento Tridimensional/métodos , Radiometria/métodos , Algoritmos , Elétrons , Géis/química , Humanos , Processamento de Imagem Assistida por Computador/métodos , Imagens de Fantasmas , Fótons , Dosagem Radioterapêutica , Planejamento da Radioterapia Assistida por Computador/métodos , Radioterapia Conformacional/métodos , Reprodutibilidade dos TestesRESUMO
Accuracy of dwell position and reproducibility of dwell time are critical in high dose rate (HDR) brachytherapy. A phantom was designed to verify dwell position and dwell time reproducibility for an Ir-192 HDR stepping source using Computed Radiography (CR). The central part of the phantom, incorporating thin alternating strips of lead and acrylic, was used to measure dwell positions. The outer part of the phantom features recesses containing different absorber materials (lead, aluminium, acrylic and polystyrene foam), and was used for determining reproducibility of dwell times. Dwell position errors of < 1 mm were easily detectable using the phantom. The effect of bending a transfer tube was studied with this phantom and no change of clinical significance was observed when varying the curvature of the transfer tube in typical clinical scenarios. Changes of dwell time as low as 0.1 s, the minimum dwell time of the treatment unit, could be detected by choosing dwell times over the four materials that produce identical exposure at the CR detector.
Assuntos
Braquiterapia/instrumentação , Imagens de Fantasmas , Radiometria/instrumentação , Tomografia Computadorizada por Raios X/instrumentação , Desenho de Equipamento , Análise de Falha de Equipamento , Dosagem Radioterapêutica , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
A commercially available motion phantom (QUASAR, Modus Medical) was modified for programmable motion control with the aim of reproducing patient respiratory motion in one dimension in both the anterior-posterior and superior-inferior directions, as well as, providing controllable breath-hold and sinusoidal patterns for the testing of radiotherapy gating systems. In order to simulate realistic patient motion, the DC motor was replaced by a stepper motor. A separate 'chest-wall' motion platform was also designed to accommodate a variety of surrogate marker systems. The platform employs a second stepper motor that allows for the decoupling of the chest-wall and insert motion. The platform's accuracy was tested by replicating patient traces recorded with the Varian real-time position management (RPM) system and comparing the motion platform's recorded motion trace with the original patient data. Six lung cancer patient traces recorded with the RPM system were uploaded to the motion platform's in-house control software and subsequently replicated through the phantom motion platform. The phantom's motion profile was recorded with the RPM system and compared to the original patient data. Sinusoidal and breath-hold patterns were simulated with the motion platform and recorded with the RPM system to verify the systems potential for routine quality assurance of commercial radiotherapy gating systems. There was good correlation between replicated and actual patient data (P 0.003). Mean differences between the location of maxima in replicated and patient data-sets for six patients amounted to 0.034 cm with the corresponding minima mean equal to 0.010 cm. The upgraded motion phantom was found to replicate patient motion accurately as well as provide useful test patterns to aid in the quality assurance of motion management methods and technologies.
Assuntos
Neoplasias/radioterapia , Imagens de Fantasmas , Técnicas de Imagem de Sincronização Respiratória/métodos , Algoritmos , Simulação por Computador , Humanos , Movimento (Física) , Planejamento da Radioterapia Assistida por Computador , SoftwareRESUMO
AIMS: The aim of TROG 14.04 was to assess the feasibility of deep inspiration breath hold (DIBH) and its impact on radiation dose to the heart in patients with left-sided breast cancer undergoing radiotherapy. Secondary end points pertained to patient anxiety and cost of delivering a DIBH programme. MATERIALS AND METHODS: The study comprised two groups - left-sided breast cancer patients engaging DIBH and right-sided breast cancer patients using free breathing through radiotherapy. The primary end point was the feasibility of DIBH, defined as left-sided breast cancer patients' ability to breath hold for 15 s, decrease in heart dose in DIBH compared with the free breathing treatment plan and reproducibility of radiotherapy delivery using mid-lung distance (MLD) assessed on electronic portal imaging as the surrogate. The time required for treatment delivery, patient-reported outcomes and resource requirement were compared between the groups. RESULTS: Between February and November 2018, 32 left-sided and 30 right-sided breast cancer patients from six radiotherapy centres were enrolled. Two left-sided breast cancer patients did not undergo DIBH (one treated in free breathing as per investigator choice, one withdrawn). The mean heart dose was reduced from 2.8 Gy (free breathing) to 1.5 Gy (DIBH). Set-up reproducibility in the first week of treatment assessed by MLD was 1.88 ± 1.04 mm (average ± 1 standard deviation) for DIBH and 1.59 ± 0.93 mm for free breathing patients. Using a reproducibility cut-off for MLD of 2 mm (1 standard deviation) as per study protocol, DIBH was feasible for 67% of DIBH patients. Radiotherapy delivery using DIBH took about 2 min longer than for free breathing. Anxiety was not significantly different in DIBH patients and decreased over the course of treatment in both groups. CONCLUSION: Although DIBH was shown to require about 2 min longer per treatment slot, it has the potential to reduce heart dose in left-sided breast cancer patients by nearly a half, provided careful assessment of breath hold reproducibility is carried out.
Assuntos
Neoplasias da Mama , Neoplasias Unilaterais da Mama , Neoplasias da Mama/radioterapia , Suspensão da Respiração , Estudos de Viabilidade , Feminino , Coração , Humanos , Órgãos em Risco , Dosagem Radioterapêutica , Planejamento da Radioterapia Assistida por Computador/métodos , Reprodutibilidade dos Testes , Neoplasias Unilaterais da Mama/radioterapiaRESUMO
PURPOSE: To quantify movement of prostate cancer patients undergoing treatment, using an in-house developed motion sensor in order to determine a relationship between patient movement and high dose rate (HDR) brachytherapy implant displacement. METHODS: An electronic motion sensor was developed based on a three axis accelerometer. HDR brachytherapy treatment for prostate is delivered at this institution in two fractions 24 h apart and 22 patients were monitored for movement over the interval between fractions. The motion sensors functioned as inclinometers, monitoring inclination of both thighs, and the inclination and roll of the abdomen. The implanted HDR brachytherapy catheter set was assessed for displacement relative to fiducial markers in the prostate. Angle measurements and angle differences over a 2 s time base were binned, and the standard deviations of the resulting frequency distributions used as a metric for patient motion in each monitored axis. These parameters were correlated to measured catheter displacement using regression modeling. RESULTS: The mean implant displacement was 12.6 mm in the caudal direction. A mean of 19.95 h data was recorded for the patient cohort. Patients generally moved through a limited range of angles with a mean of the exception of two patients who spent in excess of 2 h lying on their side. When tested for a relationship between movement in any of the four monitored axes and the implant displacement, none was significant. CONCLUSIONS: It is not likely that patient movement influences HDR prostate implant displacement. There may be benefits to patient comfort if nursing protocols were relaxed to allow patients greater freedom to move while the implant is in situ.
Assuntos
Braquiterapia/instrumentação , Fracionamento da Dose de Radiação , Movimento (Física) , Movimento , Neoplasias da Próstata/fisiopatologia , Neoplasias da Próstata/radioterapia , Humanos , MasculinoRESUMO
PURPOSE: An anthropomorphic pelvic phantom was designed and constructed to meet specific criteria for multicenter radiotherapy dosimetric intercomparison. METHODS: Three dimensional external and organ outlines were generated from a computed tomography image set of a male pelvis, forming the basis of design for an anatomically realistic phantom. Clinically relevant points of interest were selected throughout the dataset where point-dose values could be measured with thermoluminescence dosimeters and a small-volume ionization chamber. Following testing, three materials were selected and the phantom was manufactured using modern prototyping techniques into five separate coronal slices. Time lines and resource requirements for the phantom design and manufacture were recorded. The ability of the phantom to mimic the entire treatment chain was tested. RESULTS: The phantom CT images indicated that organ densities and geometries were comparable to those of the original patient. The phantom proved simple to load for dosimetry and rapid to assemble. Due to heat release during manufacture, small air gaps and density heterogeneities were present throughout the phantom. The overall cost for production of the prototype phantom was comparable to other commercial anthropomorphic phantoms. The phantom was shown to be suitable for use as a "patient" to mimic the entire treatment chain for typical external beam radiotherapy for prostate and rectal cancer. CONCLUSIONS: The phantom constructed for the present study incorporates all characteristics necessary for accurate Level III intercomparison studies. Following use in an extensive Level III dosimetric comparison over a large time scale and geographic area, the phantom retained mechanical stability and did not show signs of radiation-induced degradation.
Assuntos
Pelve/patologia , Imagens de Fantasmas , Radiometria/métodos , Radioterapia/métodos , Relação Dose-Resposta à Radiação , Desenho de Equipamento , Humanos , Masculino , Teste de Materiais , Modelos Anatômicos , Neoplasias da Próstata/radioterapia , Dosagem Radioterapêutica , Reprodutibilidade dos Testes , SoftwareRESUMO
PURPOSE: To assess dose delivery accuracy to clinically significant points in a realistic patient geometry for two separate pelvic radiotherapy scenarios. METHODS: An inhomogeneous pelvic phantom was transported to 36 radiotherapy centers in Australia and New Zealand. The phantom was treated according to Phase III rectal and prostate trial protocols. Point dose measurements were made with thermoluminescent dosimeters (TLDs) and an ionisation chamber. Comprehensive site-demographic, treatment planning, and physical data were collected for correlation with measurement outcomes. RESULTS: Dose delivery to the prescription point for the rectal treatment was consistent with planned dose (mean difference between planned and measured dose - 0.1 ± 0.3% std err). Dose delivery in the region of the sacral hollow was consistently higher than planned (+1.2 ± 0.2%). For the prostate treatment, dose delivery to the prostate volume was consistent with planned doses (-0.49 ± 0.2%) and planned dose uniformity, though with a tendency to underdose the PTV at the prostate-rectal border. Measured out-of-field doses were significantly higher than planned. CONCLUSIONS: A phantom based on realistic anatomy and heterogeneity can be used to comprehensively assess the influence of multiple aspects of the radiotherapy treatment process on dose delivery. The ability to verify dose delivery for two trials with a single phantom was advantageous.
Assuntos
Ensaios Clínicos como Assunto , Estudos Multicêntricos como Assunto , Pelve/anatomia & histologia , Imagens de Fantasmas , Radiometria/instrumentação , Radioterapia/métodos , Análise de Variância , Humanos , Masculino , Pelve/diagnóstico por imagem , Neoplasias da Próstata/diagnóstico por imagem , Neoplasias da Próstata/radioterapia , Doses de Radiação , Tomografia Computadorizada por Raios XRESUMO
To assess the effect of lesion motion and respiration rate on Standardised Uptake Value (SUV) and the ability of 4D PET to restore any loss in SUV and distortion of lesion volume on two PET/CT systems. A Perspex phantom with four cylindrical reservoirs filled with (18)F-FDG was used in this study. The cylinders measured 5, 10, 15, and 20 mm in diameter. A GE Discovery STE8 (GE Medical Systems Milwaukee, WI) and a Siemens Biograph 64/40 (Siemens Medical Solutions, Erlangen, Germany) scanner was used to acquire a stationary un-gated PET scan of the phantom. Multiple 10 min list mode 4D PET scans were acquired using the Varian RPM on the GE camera and the Anzai Gating system on the Siemens camera. The phantom was scanned at five different respiratory rates and motion amplitudes in a sinusoidal fashion, 15 RPM/1 cm, 15 RPM/2 cm, 15 RPM/4 cm, 30 RPM/2 cm and 7.5 RPM/2 cm (RPM-respirations per minute). Each scan was reconstructed into ten bins and as an un-gated static image. The SUVmax, SUVmean and volume were measured for all four reservoirs using Siemens TrueD analysis software. With increasing lesion movement the SUVmax and SUVmean decreased and the volume increased with the SUVmax in the smallest lesion underestimated by up to a factor of four. The SUVmax, SUVmean and volume were mostly recovered using 4D imaging regardless of amount of lesion displacement. The larger lesions showed better count recovery and volume correction than the smaller lesions. The respiratory rate had no effect of SUV or volume. Un-gated imaging of moving lesions decreases apparent SUV in small lesions significantly and overestimates volumes. 4D PET scanning recovers most of the apparent loss in SUV and distortion of volumes.
Assuntos
Imageamento Tridimensional/métodos , Imagens de Fantasmas , Tomografia por Emissão de Pósitrons/métodos , Tomografia Computadorizada por Raios X/métodos , Humanos , Modelos Biológicos , Movimento/fisiologia , Neoplasias/patologia , Reprodutibilidade dos Testes , RespiraçãoRESUMO
A methodology has been developed for a dosimetry inter-comparison of intensity modulated radiation therapy (IMRT) delivery in Australasia. The inter-comparison is part of site credentialing for those sites participating in the prostate fractionated irradiation trial (PROFIT) for intermediate-risk prostate patients developed by the Ontario Clinical Oncology Group and coordinated in Australasia by the Trans Tasman Radiation Oncology Group. Features of the dosimetry inter-comparison design included the use of a dedicated pelvic anthropomorphic phantom, the use of a single CT data set of the phantom including contours and the use of radiochromic film as a dosimeter. Action levels for agreement between measured dose and treatment planning system dose have been proposed based on measurement uncertainty and international experience. A trial run of the dosimetry procedure at the reference centre gave results within the predefined action levels.
Assuntos
Neoplasias da Próstata/radioterapia , Radiometria/normas , Planejamento da Radioterapia Assistida por Computador/normas , Radioterapia de Intensidade Modulada/normas , Australásia , Humanos , Masculino , Estudos Multicêntricos como Assunto/métodos , Estudos Multicêntricos como Assunto/normas , Imagens de Fantasmas , Radiometria/instrumentação , Radiometria/métodos , Dosagem Radioterapêutica , Planejamento da Radioterapia Assistida por Computador/instrumentação , Planejamento da Radioterapia Assistida por Computador/métodos , Radioterapia de Intensidade Modulada/instrumentação , Radioterapia de Intensidade Modulada/métodos , Ensaios Clínicos Controlados Aleatórios como Assunto/métodos , Ensaios Clínicos Controlados Aleatórios como Assunto/normas , Reprodutibilidade dos Testes , Tomografia Computadorizada por Raios XRESUMO
INTRODUCTION: Deformable image registration (DIR) can play an important role in the context of adaptive radiotherapy. The AAPM Task Group 132 (TG-132) has described several quantitative measures for DIR error assessment but they can only be accurately defined when there is a ground-truth present in high-contrast regions. This work aims to set out a framework to obtain optimal results for CT-CT lung DIR in clinical setting for a commercially available system by quantifying the DIR performance in both low- and high-contrast regions. METHODS: Five publicly available thorax datasets were used to assess the DIR quality. A "Ghost fiducial" method was implemented by windowing the contrast in a new feature provided by Varian Velocity v4.1. Target registration error (TRE) of the landmarks and Dice-similarity coefficient of the tumour were calculated at three different contrast settings to assess the algorithm in high- and low-contrast scenarios. RESULTS: For the original unedited dataset, higher resolution DIR methods showed best performance acceptable within the recommended limit according to TG-132, when actual displacements were less than 10 mm. The relation of the actual displacement of the landmarks and TRE shows the limited capacity of the algorithm to deal with movements larger than 10 mm. CONCLUSION: This work found the performance of DIR methods and settings available in Varian Velocity v4.1 to be a function of contrast level as well as extent of motion. This highlights the need for multiple metrics to assess different aspects of DIR performance for various applications related to low-contrast and/or high-contrast regions.
Assuntos
Algoritmos , Processamento de Imagem Assistida por Computador , Pulmão , Dosagem Radioterapêutica , Tomografia Computadorizada por Raios XRESUMO
Improvements in delivery of radiation dose to target tissues in radiotherapy have increased the need for better image quality and led to a higher frequency of imaging patients. Imaging for treatment planning extends to function and motion assessment and devices are incorporated into medical linear accelerators (linacs) so that regions of tissue can be imaged at time of treatment delivery to ensure dose distributions are delivered as accurately as possible. A survey of imaging in 97 radiotherapy centres in nine countries on six continents has been undertaken with an on-line questionnaire administered through the International Commission on Radiological Protection mentorship programme to provide a snapshot of imaging practices. Responses show that all centres use CT for planning treatments and many utilise additional information from magnetic resonance imaging and positron emission tomography scans. Most centres have kV cone beam CT attached to at least some linacs and use this for the majority of treatment fractions. The imaging options available declined with the human development index (HDI) of the country, and the frequency of imaging during treatment depended more on country than treatment site with countries having lower HDIs imaging less frequently. The country with the lowest HDI had few kV imaging facilities and relied on MV planar imaging intermittently during treatment. Imaging protocols supplied by vendors are used in most centres and under half adapt exposure conditions to individual patients. Recording of patient doses, a knowledge of which is important in optimisation of imaging protocols, was limited primarily to European countries.
Assuntos
Radioterapia (Especialidade) , Radioterapia Guiada por Imagem , Tomografia Computadorizada de Feixe Cônico , Humanos , Aceleradores de Partículas , Imagens de Fantasmas , Dosagem Radioterapêutica , Planejamento da Radioterapia Assistida por Computador , Inquéritos e QuestionáriosRESUMO
Field junctions between megavoltage photon beams are important in modern radiotherapy for treatments such as head and neck and breast cancer. An electronic portal imaging device (EPID) may be used to study junction dose between two megavoltage X-ray fields. In this study, the junction dose was used to determine machine characteristics such as jaw positions and their reproducibility, collimator rotation and the effect of gantry rotation. All measurements were done on Varian linear accelerators with EPID (Varian, Palo Alto, CA). The results show reproducibility in jaw positions of approximately 0.3 mm for repeated jaw placement while EPID readings were reproducible within a standard deviation of 0.4% for fixed jaw positions. Junction dose also allowed collimator rotation error of 0.1 degrees to be observed. Dependence of junction dose on gantry rotation due to gravity was observed; the gravity effect being maximum at 180 degrees gantry angle (beam pointing up). EPIDs were found to be reliable tools for checking field junctions, which in turn may be used to check jaw reproducibility and collimator rotation of linacs.
Assuntos
Eletrônica/instrumentação , Doses de Radiação , Radiometria , Tomografia Computadorizada por Raios X/instrumentação , Ecrans Intensificadores para Raios X , Desenho de Equipamento , Análise de Falha de Equipamento , Humanos , Reprodutibilidade dos Testes , Sensibilidade e Especificidade , SilícioRESUMO
Dosimetry for intraoperative radiotherapy (IORT) after wide local excision for breast cancer using a 50 kV X-ray needle (Intrabeam) was performed in vivo using thermoluminescence dosimetry. Eight LiF:Mg,Ti chips were placed on the skin around the incision site after wide local excision while the tumour bed was irradiated to a prescribed dose of 5 Gy 10 mm from the applicator surface. The maximum and mean measured skin dose for 57 patients ranged from 0.64 to 7.1 Gy and 0.56 to 4.78 Gy, respectively, reflecting different tissue thicknesses overlying the applicator. The average maximum dose of 2.93+/-1.46 Gy was below the threshold for severe radiation skin toxicity.
Assuntos
Neoplasias da Mama/radioterapia , Neoplasias da Mama/cirurgia , Terapia Combinada , Feminino , Humanos , Mastectomia Segmentar , Dosagem Radioterapêutica , Radioterapia Adjuvante , Pele/efeitos da radiação , Dosimetria TermoluminescenteRESUMO
AIM: To assess the intrafraction motion of the urinary bladder and delineate the appropriate margin size for radiotherapy planning, for both the full and empty bladder. MATERIALS AND METHODS: This was a single-site, single-arm study of 20 patients planned to undergo radical cystectomy for histologically confirmed muscle-invasive bladder cancer. Patients underwent magnetic resonance imaging (cineMRI) of the entire pelvis using a 3-Tesla system, prior to cystectomy. Patients first underwent a cineMRI with a full bladder, then voided and underwent a second MRI with an empty bladder. All MRI sequences were acquired over 18 min. We assessed the differences in bladder filling and subsequent bladder wall displacement, between the empty and full bladder, during a time period consistent with radiotherapy treatment delivery. RESULTS: Twenty patients underwent cineMRI of the entire pelvis. The maximum mean directional displacements of the bladder walls over the 18 min duration of the scan for the empty bladders were 9.8 mm superiorly, 1.1 mm inferiorly, 2.39 mm anteriorly, 3.73 mm posteriorly, 2.74 mm to the left and 2.48 mm to the right. The maximal mean displacements for the full bladders were 9.2 mm superiorly, 1.1 mm inferiorly, 2.28 mm anteriorly, 1.08 mm posteriorly, 1.85 mm to the left and 1.73 mm to the right. Statistically significant differences were seen in the posterior, left and right displacements but were quantitatively small. CONCLUSIONS: Intrafractional motion secondary to bladder filling showed minimal variation between the full and empty bladder. Similar clinical target volume to planning target volume margins can be applied for the delivery of radiotherapy for a full and empty bladder.